K8T Neo FIS2R AMIBOOT.ROM not working

Hi
Had a game crash on my system, and froze everything, so had to restart manualy - now I get the error BIOS is not installed..
I have downloaded a copy of the bios (not latest) and changed the relevant ROM file to AMIBOOT.ROM and copied to a freshly formated floppy.
I inserted the disk, held down CTRL and HOME and started the computer...
After a while of running through the messages of BIOS not installed and no SATA installed (which is correct), the floppy drive light comes on, and then after a while (afet I have released the CTRL and HOME keys) I get a message saying "Remove disks or other media, Press any key to restart" then nothing, if I press any key - it says the same thing untill I remove the floppy... and then it restarts again.
I have tried to restart using the floppy and the CTRL and HOME keys about 20 times so far - always the same result - I have even tried diferent versions of the BIOS.
Any ideas?
I only have one stick of RAM (256Kb - 333) and two IDE HD's
Many thanks in advance
GreenBoy

Hans
My Set up is as follows (from the top of my head as I am doing this form work)
K8T Neo FIS2R.
AMD 3300 745pin chip set.
1 stick of 512Mb ram (non branded - baught from Watford Electronics)
2 x 200Gb Maxtor HD's
1 40GB Seagate HD
1 DVD RW
Power 500W
Dont know what else you need...
Anyway - last night I reset the CMOS in the way you described.
Still cant find the VIA settings in the Advanced Chipset or elsewhare - but I will. urned of SATA in Intergrated Peripherals...
Anyway - what then happens, is it says it cannot boot.
I tried using a Win98 SE boot disk - and all the drivers were listed as not possible to load or something...
Any way - deciding I did not have anotehr boot disk to hand - tried Symantec Ghost - still same result.
Finaly I tried WinXP Pro, and found that this installed all the bootup files no problem at all - what was then found was that my C: partition was missing - yup boot sector had completely disapeared.
Anyway knowing that I have recent full backups og my primary drives using Ghost, I took the plunge, created a partition in the unalocated space, reformated the drive, and reinstalled WinXP... all seems ok for now... except the message regarding no BIOS - but from what you say as soon as I fing the switch I will loose that again.
The strange thing is I never used to get this message before, and do not remember setting anything up for SATA - couldnt afford the disks at the time....
Thanks for the help Hans, you have been more than gwenerouse with your time , but can you please give me some more information? (Im a bit of a Nooby at playing with BIOS etc as they scare the crap out of me! )
1) Why is the detail of my system so important? I have made no Hardware changes for approx 6 months and everything was fine untill the game crashed, so therefore, dont see why this should affect things.
2) Why did the flashing of the BIOS not work? I was following the instructions carefully - but nothing.. therefore in my Nooby mind this means there is something else wrong, stopping the flashing from working.
Again - many thanks
GreenBoy

Similar Messages

K8T NEO-FIS2R RTL will not work Corsair 3700 2x512 or Geil pc4000 2x256

my corsair 2x512 pc3700 twinx will not work even with setting timings manually nor with the New Geil pc4000 (2.5,7,4,4) 4x256 all 6 modules are known good and tested on NF2 and Canterwood rigs.
ANy ideas on when a bios update to fix this might occur?
im stuck using 2x256 Hyperx pc4000
or even worse some old Hynix ram
thx M*XI

http://www.hardware-testdk.com/test_show.asp?id=2214
The first AMD test setup
CPU : AMD Athlon64 2GHz – 200MHz FSB
MEMORY : OCZ PC3700 – 512MB
HDD : Western Digital 40GB
OS : Windows XP Professional
During the test I experienced, that the system was unable to boot up with Corsairs XMS3700 memory module. So I had to exchange it with an OCZ PC3700 memory module.
seems your not alone

K8T NEO-FIS2R & SATA DVD not working

I've been trying to get a plextor SATA drive working with 3 other SATA hard drives, 2 of which will be in RAID. Problem is I can't get the DVD drive to be detected at all by the onboard promise controller and the VIA 8237 controller seems to be stuck in RAID mode so it also refuses to run the drive. I've tried updating the BIOS to 2.0 in hopes that it updated the controller BIOS.
Has anyone been able to get SATA DVD and hard drives up using only the onboard controller?

I've been trying to get a plextor SATA drive working with 3 other SATA hard drives, 2 of which will be in RAID. Problem is I can't get the DVD drive to be detected at all by the onboard promise controller and the VIA 8237 controller seems to be stuck in RAID mode so it also refuses to run the drive. I've tried updating the BIOS to 2.0 in hopes that it updated the controller BIOS.
Has anyone been able to get SATA DVD and hard drives up using only the onboard controller?

K8t neo fis2r - core center not functional after installing sound card

Hi. I had been using Core Center with Dynamic Overclocking enabled and all was well. When idle, my amd64 3000+ (2.0ghz), was running at 800mhz. Under load it would go up to 2100mhz. But yesterday, I installed an Auzentech x-plosion sound card and after i installed the driver, the dynamic overclocking stopped working, my cpu is running at max all the time. (The variable fan speed function still works).
I checked the IRQ and there is no conflict, I uninstalled the amd64 driver and core center and reinstalled. Still does not work. I uninstalled the auzentech driver, rebooted, and cancelled new hardware wizard. Then the variable cpu frequency feature worked. Once I install the driver for the auzentech, dynamic oc stops working. I was thinking to try another pci slot but it appears to be a software issue rather than a hardware issue. The new version of Core Center does not work with my board even though msi says it's compatible so I'm still using the one that always worked. The amd driver is the latest and also always worked.
Has anyone else had a similar problem, perhaps using the auzentech sound card with this board and Core Center? Or does anyone have any suggestions?
Thanks!
K8T Neo FIS2R
AMD64 3200
AMI bios version 2.2
1.5Gb pc3200 memory
nvidia quadro FX 1100 128mb AGP
Antec 430W ps

Hey guys, I just went to AMDs site to get the dashboard utility mentioned and in the readme, it stated that in XP, the power option needs to be set to portable/laptop. But in the past, I read that it needed to be set to "always on" and that it is, in fact, what I had it set to before when cool n quiet was working. Now I change it to "portable/laptop" and it works and set to "always on" doesn't work anymore. So now Core Center reports I'm at 33c @800mhz at no load. I don't get it??? I'll have to try an alternate utility just to verify that is indeed working.
btw, QV, I checked system properties, (right-click my computer > properties, or "system" in control panel) and on the "general" tab, it indicates an AMD64 3000+, 2.0GHz. But I'm pretty certain the clock frequency is dropping now as reported by core center because of the decrease in the cpu temp at idle. Am I looking in the right place in XP? I have XP pro, SP2
Again, thanks for the input and Happy New Year

MOVED: K8T Neo On-board SATA not working

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=142488.0

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=142488.0

K8T Neo-FIS2R - raid 1 refused by Win2K

Hi,
I had K8T Neo-FIS2R for some time, working flawless. I had 1 ATA drive (Maxtor 120GB, 8MB) on a VIA controller. Then I decided to buy another similar one ATA HD, and create a raid 1 array (ATA+ATA) on Promise controler, with existing Win2K SP4 instalation.
Everything went smoothly, creation of array and image on second HD. Then reboot, Windows start loading... and suddenly BSOD. Message: "If this is your first time seeing this message...check for viruses...corrupted HD...blah blah".
Tried loading again and again - same situation.
Then I discarded array, rebooted, and created it again. Same problems. And headache & rage.
Few days later, I had a possibility to borrow a new SATA Maxtor 120GB drive, and try with ATA + SATA raid 1 combination. Done everything from the beggining, creating of array and image, at the end...again BSOD with the same message. 100% identical like in 2xATA combination.
I thought that maybe the problem is in "original" ATA HD, so i tried with another combination: second (new) ATA HD from first situation (image of original HD was still on it, but with discarded array), anda SATA from second as a "slave" (so, this one is deleted in creating of this array). Same, same, same... Needless to say, at the end I tried with SATA as "master" and ATA as "slave". No progress.
BIOS and all drivers were/are up-to-date. All HD`s work OK in a "no raid" situation, on both controllers.
I have searched this forum, but didn`t find similar problem. If you have some ideas/suggestions/solutions, you will be a hero, for saving a one young man`s life
Thanks in advance,
Buca,
Belgrade, Serbia

Quote
Originally posted by Tiresmoke
Promise ATA raid can only work though the Promise ports which in the case of ATA or Ultra ATA drives would be IDE3 port. Then you must have Promise Raid turn on in the Pheriferals menu in Bios as well as set up under the Promise Raid section that will come up directly after post.
You will need to read the Promise Ademdum manual that came along with the regular user manual for setup details.
Thanks for trying to help, but I have done that all. I can create a raid array with ATA drives only on Promise...

6600GT not working with K8T neo-FIS2R

I recently returned a K8T NEO-FIS2R MB for repair. The problem was that the PS/2 and USB ports were broken. However the MB has been returned and the PS/2 and USB ports work fine. I posted about this several months ago.
Now the AGP port seems to be broken (not the actual slot). I have tried a 6800 Ultra and a 6600 GT (AGP version) GFX card in this slot. Both cards fail at the driver installation point. I have tried driver versions 66.93, 67.02 and 67.03. I also tried 3 versions of the via drivers 451, 453 and 455. Even tried XP with SP1 and SP2. The PC will sometimes BSOD, reset, won't boot into windows. The drivers sometimes install then other times they won't, etc. The problems only seem to be with the drivers for the GFX cards.
The 6600 GT works as I have tried it in another MB without any problems.
I know the memory works fine as I used memtest86+ for a couple of hours on the default settings without any errors and it works in another PC.
The spec of the PC is:
XP pro
K8T NEO-FIS2R MB
512MB corsair XMS at 2.5-3-7-3
XFX 6600GT
40gig HDD
FDD
Plextor CD writer
DVD Rom
PSU is a Q-tec 550W
I know Q-tec PSUs are not up to much from what I have read elsewhere in this forum, but I have had it running in a similar system with the 6800 Ultra installed without any trouble (even with the above MB before it went faulty). I have also tried a 400W PSU, that came with the case. The Voltages on the 12V line are between 12.00 and 12.03 when using the Q-tec PSU.
Has any body else had these problems with the 6600GT in the mentioned MB.
Also, how can I check the serial number on the MB with the label on the box, as this MB that was returned to me looks to “clean” to be the one I sent away for repair.
Thanks for any help

Hey, I'm glad to see a post on the new Gforce 6600GT AGP card. I just recently put together a brand new system (see my sig for specs). System runs great. The only thing I wanted to do was replace the video card, and after a great deal of anxiety I decided the Geforce 6600GT AGP was the best bang for the buck.
Well I got home, installed the card and never get passed the bios screen. (shows your processor, memory, memory siz), the screen u hit DEL to go into the bios.
The system doens't lock up, NUM LOCK can still be turned on and off, and CAPS can be turned of and on... but thats it. Just sits on that screen. I can't go into the bios either.
what settings do I need to do prior to isntalling this card to get it to work.
Let me know if you all need anymore details to help me out.
oh, I did reset my frequency to 10x200 (which is what I think the 3000+ is supposed to be at).

[Athlon64] MSI K8T Neo FIS2R BIOS Update when? CnQ no workie!

The MSI K8T Neo FIS2R (MS-6702) hasn't had a BIOS update since 3-4-2005!
I put a Sempron 64 3000+ in my motherboard, and was very disappointed that it is recognized as an "AMD Unknown Processor". Sure, it works, but one of the reasons I bought it is in the hopes of getting AMD Cool n Quiet to work. However, apparently the AMD driver can't recognize the CPU due to the old BIOS on the motherboard.
Every other MSI skt 754 board supports Sempron E6 revision already. Why not the K8T Neo FIS2R? Where have all the MSI BIOS programmers gone? I have been waiting 2-months for a BIOS update to support the E6 Semprons. I have asked and begged MSI Tech Support. I am tempted to switch to ASUS or some other company that is actually timely with BIOS updates. Only reason I haven't yet, is this board is everything I want EXCEPT for Cool n Quiet not working. It's starting to look like there is no BIOS update in sight, so I am very disappointed.
Anyone here work for MSI can confirm there are no plans for a BIOS update? Because I don't want to wait around for something that's not going to happen.

Sorry, I didn't mean to imply I thought the mods here are MSI staff... I was just kind of hoping there's MSI staff lurking here, seeing what people think of their products or seeing what people complain about.
No, pretty much C 'n Q is the only reason I'm disappointed, but it was something I was really set on getting to work since this is a server that's up 24/7, but isn't utilized but maybe 4hrs out of a given day. I could reduce frequency and voltage, but unlike C 'n Q, it won't automatically increase speed and voltage based on demand - which is something I want since although it's a server, I also use it as a regular PC as well.
I've even tried the 2.33 beta BIOS with no change, and even found a 5.52 BIOS in their BIOS testing directory. I guess that BIOS was for a different kind of 6702, although I had pulled out the peripheral modules with AMI's MMTOOL and they looked the same as the existing BIOS, but that BIOS killed my motherboard so it couldn't have been for a regular 6702. I had to desolder the BIOS chip with a heat gun, reprogram the old BIOS back on it with an EPROM programmer, and solder in a socket. I guess that shows my dedication to get C 'n Q working!

Msi K8T Neo-FIS2R built in 1394 shows up but doesn't work?

I have a msi K8T Neo-FIS2R, and the built in 1394 does not work. It shows up in windows but doesnt work when plugged in.
I have tried disabling and reenabling in the bios, and disabling almost all other things to eliminate an IRQ problem to no avail.
I have an audigy 2 ZS also which has a firewire port, which is working, but I'd like to have access to the mainboard's ports as well.
any suggestions?
Thanks
AMD A64 3400
thermaltake venus 12 heatsink.
2x512 mushkin lv2 pc 3500 bh-5
msi K8T Neo-FIS2R
western digital 120 gig SE HD with 8mb
soundblaster live audigy 2 ZS
32x liteon burner
Built by ati 9800XT
TV LEADTEK/DELUXE TV2000XP TV/FM R
LIAN LI pc-82 with window

Welcome
What bios version are you on?The latest on the site was supposed to fix this problem-the 1.6-but dunno if it did or not,flash it to latest then have a look.

K8t Neo-fis2r - not booting!!!

Hello Motherboard gurus! Any help would be appreciated...
Here are my system specs:
AMD Athlon 64 3000+
Motherboard /AMD Socket 754 CPU’/ "K8T NEO-FIS2R"
RAM - Kingston 184 Pin 512MB DDR PC-3200 X2
Hard Drive – 120GB – Maxtor 120GB 6Y120PO
TEAC 1.44MB 3.5 Black Floppy Disk Drive
ThermalTake Silent PurPower 360WATX Power Supply
Lite-on DVDR – Model LDW/811S/851s BLK
ATI AIW RADEON 9600 Video Card, 128MB DDR, 128-bit, CATV/Video Out/Video In, 8X AGP, Model "ALL-IN-WONDER 9600"
Everything was working just fine until I switched out my CPU fan for a super quiet Zalman fan. I hit the power and nothing, but the fan spins up just fine. No video. The LED's on the back cycle through a couple of settings and sit at all green except for the upper left at red. I am at a loss ...perhaps the video card? I tried replacing the original fan and got the same result
Thanks in advance for any help,
JD

Your power is weak for sure. However you may also be seeing a fan that runs to slow for the motherboard to read. If the speed drops below what the MB expects it will cause issues as it thinks the CPU fan is dead and may not want to operate at all. Check that by reinstalling your old fan. Also on the power issue what is the 12v rail amps on that PSU?

K8T Neo FIS2R not getting through POST

I hope some of you might be able to help me. I just finished building a new system using the K8T Neo FIS2R motherboard. I actually had everything working with XP installed, but this morning, I have not booted once. It's not clearing POST anymore.
I get a long beep followed by 8 short beeps. According to the BIOS beep codes I've seen in other posts, that has something to do with the BIOS checksum error. I did upgrade the BIOS to 1.7 from an MSI Live Update download.
I'm basically stuck, is the mobo dead?
K8T Neo FIS2R
AMD Athlon 64 3000+
2 512MB Kingston Memory Modules
MSI ATI Radeon 9800 Pro 128MB
Power Supply :
+3.3 / 32A, +5 / 40A, +12 / 24A, -12 / 1.0A,-5 / .5A, +5SB / 2A
If you need more info, just reply.
Thanks,
-Erik

kawasakiguy37 and others
This does not bode well for my current situation, or yours. I have to believe that there are many people out there that have a successful 1.7 BIOS running.
But I'm beginning to lead in this direction now, especially since your description is close to mine. I was able to run in v1.7 for a short time, then it just died.
Also, I don't know if this helps, but after my beep codes, I assume the POST continues, because about 15 seconds later there is 2 short beep following by 1 long beep and the D-bracket is has green all around minus number 4 which is read. Assume blue=green here :
This is "Testing RTC (Real Time Clock)". At this stage it just stops.
I am assuming that I can flash my BIOS using the cntrl-home method, however, if that fails, are we looking at RMA here... And if so, what are peoples experiences with RMA'ing with an online dealer? How much proof will I need to go through?
Also, by the way, these forums are awesome... The data here has been great. It's nice to see such a great forum that has valuable information.
Thanks to everyone for the help so far.
-Erik

MSI K8T Neo-FIS2R - Suggestions

Hi,
I have just ordered these parts:
AMD Athlon 64 3200 (Socket 754) - Retail (CP-060-AM)
Asus DVD-E616P1 16X DVD-ROM / 48X CD-ROM - Retail (CD-002-AS)
Western Digital Caviar 120GB Special Edition 8MB Cache Serial ATA - OEM (HD-009-WD)
Antec Sonata Piano Black Quiet Case - 380W TruePower Silent PSU (CA-003-AT)
MSI K8T Neo-FIS2R (Socket 754) Motherboard (MB-010-MS)
Sapphire Radeon 9800Pro
I am still stuck on RAM, despite searching other topics. Which PC3200 RAM actually works to the speed that it should, I'm not convinced by the MSI list.
Will Kingston HyperX PC3200 work to its full standard? I was initially looking at KingMax PC3500 RAM which is a lot cheaper, however it seems pointless to spend so much on quality parts and then get cheap RAM(although PC3500 should be faster, I assume it shouldn't make any difference if I'm not overclocking). I don't think I can quite afford Mushkin RAM, as I have about £220 for 1GB.
Secondly, with my PSU be able to power the system without overclocking?
Thanks for any ideas.

I would also suggest a better PSU, I had a Enermax 350W before and it only just coped + a high pitched whining sound
Plus a Pentium 4 and an AMD64 = not equivalent in terms of power consumption. If you already have that PSU, then fair enough try it. But if your still planning to buy it... I would go for a better one. Just my 2 cents

K8T Neo-FIS2R / Kingston KVR400X64C25/256

As a first time poster my apolgies if this has been covered elsewhere - I have read most of the posts on this forum but found no specific reference. Please just point me in the right direction if i am wrong!
I bought the Kingston KVR400X64C25/256 modules because:
a) they were listed by MSI on the list of tested Ram
b) they were on Kingston's list for the K8T NEO &
c) they were in stock. However...
If installed in DIMM 2 & 3 (as per MSI tested RAM pdf) the system crashes on trying to load Windows. DIMM 1 & 2 'works' if that allows for 8 or 9 restarts/day. I tried 1 & 3 to see if that improved the situation, but if anything it was worse. I have tried increasing the RAM voltage to 2.6 but there is no discernable difference. Upping the TRCD to 4 makes little or no difference.
Memtest86+ initially found no errors (16 hrs/93 passes) but when left running for a week came up with 10 errors (8 in test 6, 2 in test 4). MemTest (http://hcidesign.com/memtest/) gives me an average of 10 errors for 300% pass.
I'm now trying running the memory at 2.7v (within Kingston's ±.25v range).
In the meantime, has anyone run this memory without any problem - i.e. is it a simple case of faulty memory? Equally, has anyone had similar problems and found a solution?
thanks
MSI K8T Neo-FIS2R
AMI rev 1.2
AMD Athlon64 3000+ AMD heatsink/fan (working temp around 32°C)
2 x Kingston KVR400X64C25/256 (DIMM 1, DIMM 2)
NVidia GeForce3 driver v53.03
Antec TruePower 430W +3.3V 28A, +5V 36A, +12V 20A. Max load 410W
IDE1 ST340016A (master) ST320014A (slave)
IDE2 MSI DVD-ROM D16 (MS-8216)
Soundblaster Live 5.1 platinum
Windows XP Pro Version 2002 service Pack 1

Quote
Originally posted by Bas
Hi,
Sorry to say, but as soon as you get errors in memtest, no matter after how many hours, you need to try other memory.
As your memory seems to be unstable....errors in memtest are a NO-NO
hmmm! What if memtest, Prime95 etc. detect no problem over lengthy periods when sticks are individually tested in DIMM1 - as well as the system not crashing once - , but boot failures/memory dumps etc. abound when same sticks are individually placed at 2 or 3? Is this still a memory issue?
For what it's worth I have found Kingston's technical support more than helpful.
MSI K8T Neo-FIS2R
AMI rev 1.2
AMD Athlon64 3000+ AMD heatsink/fan (working temp around 40/42°C)
2 x Kingston KVR400X64C25/256 (DIMM 1, DIMM 2)
NVidia GeForce3 driver v53.03
Antec TruePower 430W +3.3V 28A, +5V 36A, +12V 20A. Max load 410W
IDE1 ST340016A (master) ST320014A (slave)
IDE2 MSI DVD-ROM D16 (MS-8216)
Soundblaster Live 5.1 platinum
Windows XP Pro Version 2002 service Pack 1

Help! XP install problems with K8T Neo-FIS2R

The other day I put together a new system for a friend. I got the system to POST properly, the diagnostic lights on the D bracket are fine, and I can edit the BIOS, and the BIOS sees all the drives properly.
However, installing XP Pro has been impossible. I set the system to boot first to the CD, then to the hard drive (from the BIOS). After booting to the CD, I never see the message I am used to seeing ("Press any key to boot from CD...) when booting from the XP Pro install disk. The system thinks about things for a long time with a blank screen, then later it finally begins to do the install. Things appear normal at this point as in any other time I have installed XP Pro. I reformat the hard drive to start clean and then the XP install files are copied over. I get the standard message that the system will reboot and this is where things get flaky. The system reboots, but I never get the message once again on whether or not to boot from the CD. So after a while the system tries to install XP once again (it would repeat this process forever....trust me). I've popped the CD out right after the system reboots so it will try to go to the hard drive. I just get some kind of boot failure message and to insert the bootable media or whatever. I've even gone into the BIOS right after the reboot to switch the BIOS loading to try and load the hard drive first. This still doesn't give me the desired results.
This is by far the weirdest thing I've ever experienced when doing an install. I've installed XP Pro on at least 15-20 desktops/laptops of different configs and never ran into this before.
The BIOS settings are stock. I didn't see anything in there that was really needed tweaking or that hadn't "set itself". I haven't messed with the SATA or RAID stuff since it's not really necessary in this situation.
Here are the system specs:
--Antec 430 True Power PSU
--K8T Neo-FIS2R mobo
--AMD 3000+ 64 bit CPU
--40GB Maxtor HD (master on IDE1)
--Lite-On DVD-ROM drive (slave on IDE1)
--80GB Western Digital (8MB buffer) (master on IDE2)
--Sony DRU510A DVD-RW (slave on IDE2)
--(2) Kingmax 184 Pin 512MB DDR PC-3200 Model# MPXC22D-38
--ATI 9800 Pro
--3.5 Floppy
All the components except the mobo, CPU, and memory are from another AMD system that was running fine. No problems with any of the HD's or the optical drives. All new components were purchased from newegg.
I thought that maybe I had a problem with the jumpering of the drives so I messed with those in about every possible combination. I took IDE2 completely out of the system and just tried to get it running with the 40GB Maxtor and the Lite-On drive. I tried about every master/slave/cable select combination but nothing was working. In certain combinations the BIOS recognized everything as I intended. I've pulled everything off that doesn't need to be connected. Keyboard, monitor, and internal components are the only things connected.
I don't consider myself to be a guru at this business, but I can get through most things with enough trial and error. This really has me stumped.
Any help is certainly appreciated.
Thanks,
Heath

Quote
Originally posted by chasmon
Hi all,
I have just setup up a brand new system but am having probelms getting it working. I want to install XP on a single Maxtor 160Gb drive.
I have my HD on Promise Ser1 and all SATA stuff in BIOS enabled. When I get to the screen I press F6 and then when promted I insert the floppy with the promise drivers on. I then get this message:
"File txtsetup.oem caused an unexpected error (4096) at line 1742 in d:\xpclient\base\boot\setup\oemdisk.c"
I can't get past this screen I have tried:
1.Drivers from the CD supplied.
2.Drivers from the MSI website.
Please help me this lot cost lots of hard earned I'm pretty gutted at the moment.
System:
Antec 380W PSU and Sonata Case
LG DVDROM 8163B
NEC DVDR/RW 2500B
Panasonic Floppy
Neo FIS2R mobo
Maxtor Diamondmax Plus 9 160Gb SATA150
Benq RF K/B & Mouse
Download the drivers from MSI again, and when you copy the contents of the XP folder to floppy ADD the file txtsetup.oem from the directory above that folder. Worked for me..!
Ian

Should I flash the bios? K8T NEO FIS2R

Ok... I have a K8T NEO FIS2R mobo. A couple of friends of mine have been telling me to flash the bios to the most current version... Then some other people have been telling me that it is too risky and I should hold off untill something goes wrong that I know a bios flash can fix...
I'm just wondering what is the concencious here... should I flash it, or should I stay with the current version I have now(the one that came with the mobo) I Like to have my computer as up to date as possible, but all the reports of bad flashes have me a little worried. This is a procedure that I have never done before, and I dont want to mess it up.
If I should flash, Any insight, tips, tricks, special instructions, etc... would be greatly appriciated.
Thanks!
Magnum

Thanks guys for the quick responces... I'm used to not getting a responce from forums for 12-24hrs and here it is less than 24hrs later and I have 10 responces.
I'm not at my computer in question right now, but I am almost positive that my bios is ver1.0. Same one that came with my mobo.
At this point I am leaning towards flashing... If basically the only way to mess it up is to have my power fail, then I dont think I will have a problem. I'll just borrow an UPS from work here to be on the safe side.
hypothetically if i follow the instructions to a tee(windows flash/live update) are there any other ways it can mess it up? I just want to get a hold on all the places where I could mess it up.
Will live update take me all the way through the procedure, or do I need a separate set of instructions to read off of during the flash?
Also what gear will I need... floppy disk? anything else?
Sorry about all the questions, just want to make sure I do this right the first time!
Thanks!
Magnum

K8T Neo FIS2R AMIBOOT.ROM not working

Similar Messages

Maybe you are looking for