K8t neo fis2r framerate problem

i have an athlon 64 3400+, msi k8t neo fis2r, 120 gb seagate barracuda, corsair xms series pc3200 512MB ram(with black heatspreader), gainward geforce fx5700ultra, 500w allied power supply. I'm having terrible framerate problems when i'm playing games. It doesn't matter what game i'm playing...i've been playing unreal tournament as a tester game. At first I thought i had a bad video card so i sent that back. I'm still having the same problem. I've flashed my bios, sp1a, all the newest chipset drivers, set my RAM timings, newest video card drivers (53.03), everything. I don't know what is going on. My games run at the same frame rate at 640x480 then when they are on 1024x768. When I turn vsynch on, i'd say about half or maybe more of the time i'd have bad frame rate, when I turn vsynch off my games play reallllly fast. It seems to jump in and out of normal rate of play. I was talking to my friend and he thought it was the timing chip on my motherboard. I'm on my last straw and i'm about to send this board back for a replacement.

I dont know what you mean by am i letting windows install it...but i'm using live update to download it then it automatically installs itself. I'll try that uninstall the agp thing on the 4 in 1 but I doubt it'll do anything seeing as how i've probably reinstalled windows 4 or 5 times and installed the 4 in 1 drivers each time to no avail. I really think my mobo's agp slot is bad or something on my mobo is bad. I was using a 300W psu for awhile, that might have done something to the board.

Similar Messages

MSI K8T NEO-FIS2R: RAM problems

I have the motherboard K8T NEO-FIS2R with AMIBIOS 2VMS V2.0 010505.
I tried these DDR-RAM:
DDR-RAM 512MB PC400 CL3 Kingston KVR400X64C3A/512
DDR-RAM 512MB PC400 CL3 Samsung
but the motherboard recognizes only 256 MB for both. The RAM are good: I tried them in an other pc!
Now I have installed an A-DATA ram 256 MB and the motherboard recognizes 256 MB!
Do you think that my motherboard is defective?
Thank you in advance.
P.S. I'm sorry for my bad english.

No the memory controller is onboard the CPU so in any case the MB is not defective. However the CPU revision may hold you back on some RAM especially if you mix make and model RAM on the same channel. A socket 754 CPU only has one channel so all RAM must be matched to work properly.
If those Sticks can only be seen as a wrong value when used by themselves it is likely that either they have errors or the timings in Bios are improperly set to azllow them to work. In this case you can normally find out what is going on by running memtest86. If you get errors on test 5 or 7 then you have timgs timed improperly and any other errors would show bad RAM.
Another case is not having enough power for everything to work properly together. Usually this happens when you don't have enough 12v amps for these newer rigs.
Post complete specs and test results and maybe we can help you further.

K8T Neo-FIS2R Old Problem, New Issue

I made my system back in 2003 using a K8T Neo-FIS2R motherboard and a Barracuda 7200 SATA 160GB drive (ST3160023AS). If you don't remember, back then motherboards that supported SATA drives for main drives, sometimes needed extra drivers in order for the windows installation process to work. At first this threw me, but since then I have reformatted my drive a few times using the same disk with no issues.
5 years of file sharing can do a number on your harddrives, and it seems my Barracuda has finally died. It came time to replace my drive with a Western Digital Caviar 320GB drive SE16 (WD3200AAKS). I did not predict there would be any issue with replacing my SATA drive. I have another 500GB drive connected to my system used for only storage and the computer recognized it at once.
So I formatted my WD HD, to NTFS and made it active. Then I installed it in my computer disconnecting my other 500GB drive. I ran windows installation with my Windows CD (which I have used many times and I keep it in pristine condition).
I found that after I hit F6, and it gave me a selection of SATA drivers to use (used xp), it did not not see that drive was there when asking which drive to format (I repeated this many times). I set about making a new SATA boot disk thinking that my pre-used one had gone bad.
http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=565
VIA VT8237(R) SATA RAID Driver (For floppy driver)
I followed the disk directions having already done it before. When I tried to install with my new drivers, I got this error.
"File\I386\NT5\viamraid.sys caused an unexpected error (4096) at line 2108 in d:\xpclient\base\boot\setup\oemdisk.c."
Now i KNOW my windows instillation CD is good, but just in case I used another windows CD and got the same error.
The only idea I can come up with is that I upgraded the bios to much and now it is having issues. My bios version is:
AMIBIOS A6702VMS V2.2 030405
SATA378 TX2plus(tm) Bios Version 1.00.103026
Does anyone have any ideas of what I can try? I have done all the easy stuff I could think off like try different cables, and plug in my SATA to the second sata port and not the first. I have run out of ideas.
The only list thing I could try was connecting my sata drive to the computer using a SATA to USB adapter, and finding the partition in windows through that way. For some weird reason windows will see USBs in the computer but not installed Sata drives. I am thinking I will install windows using the USB device and then try plugging in the drive directly. I have no idea if it will work.
Any help would be greatly appreciated.
Sombrenote

Quote from: sombernote on 11-July-08, 09:15:36
Thank you so much for your help.
I tried your two versions of your drivers, "VIA PIDE&SATA RAID.rar" "Promise 20378 S-ATA RAID.rar" neither of them worked well (I selected the "VIA RAID Controller(Windows XP"). I received a slightly different version of the last error "File\I386\NT5\viamraid.sys caused an unexpected error (4096) at line 2108 in d:\xpclient\base\boot\setup\oemdisk.c."
The (4096) was a different number.
I had used 4 different (yet old) disks, trying to get it to work. None of them did so until i tried it once more. This last time worked, it saw and used the drivers. I was able to get into the disk selection screen, and set to format the disk. As it started formatting (Quick), windows said that there was something wrong with the "Disk or CD". It then asked for me to install the SATA combo drivers. I let it detect the drivers I was using, and it kept saying something was wrong. I tried it 3 more times, and the last time it held and copied the files from the CD, to start windows.
It is obvious to me that I have either a bad disk, CD, Disk drive, or CD drive. This is quite possiblly my last format before I make my new computer. Thank you very much for your help. I would have had to start my voodoo magic tricks to get it to work.
Crappy floppy cause that
Happend to me many times as well, when you receive the error take out diskette and re-insert it, then load drivers again until works.
Of course simple solution is just replace the floppy drive to avoid "voodoo magic tricks"
Or best solution do a slipstream XP installation and integrate the drivers which you need in XP installation.
>>> Slipstreaming Windows XP Service Pack 2 and Create Bootable CD<<<
>>> Slipstreamed Windows XP CD Using SP2<<<
"Thank you very much for your help. I would have had to start my voodoo magic tricks to get it to work."
You are done well

MSI K8T Neo FIS2R - Memory problem???

I have bought myself a second stick of ram for my computer, being careful to make sure it was exactly the same brand and model.
In spite of this I now get random bluescreen errors of varying types, the first was PFN_LIST_CORRUPT and the latest:
PAGE_FAULT_IN_NON_PAGED_AREA
STOP: 0x00000050 (0xC5AD0D7C, 0x0000000, 0x8050298A, 0x0000000)
Is the new ram incompatible?? this makes no sense though..... ???

I have tried switching ram sticks around but no luck there
Got three BSOD's yesterday, no specific error just STOP: blah blah blah when trying to burn a CD and then after that just when using IE.....
........and then I played call of duty 2 for 3hours without a single problem
Today when trying to run FS2 open I got two IRQL_NOT_LESS_OR_EQUAL errors (with no driver mentioned)
Anyway, I have been doing some research on socket 754 athlon 64's, and I found some interesting info from AMD:
Where MSI says that the board supports that config at DDR400. so the board supports it but the CPU doesn't! what is the point of that??
I tried running at DDR333 but the CPU stuck at 1.8GHZ (150FSBx12) according to everest
Is it possible at all to run two sticks of Double sided ram at DDR400? surely someone has done it and has it working....
Another thing, after the first IRQL error my computer hung at detecting the CD-RW drive and I had to turn off and on again ???

K8T Neo-FIS2R Memory Problems

Hello,
First can I say thanx in advance for any help that I might get, I'm new to this board and I appretiate the hard work you all put in to the comunity.
The problem originaly was that this board would only work with one memory stick. It did not matter how big it was 256 - 512 - 1GB, it would boot, but if I added another say 2X 512 the system would not boot, the screen would just stay black. I upgraded the bios from the MSI site - the file name was 6702v22.zip.
The system now boots fine with 2X memory sticks is (that cured it), but now I find that I cant alter the memory timings. No matter what I set the CAS to it always defaults to 3, Its like its stuck on auto for some reason. I reset the bios after the flash, and tried different slots, different memory sticks, but the bios seems to ignore any manual settings I put in there.
Can anyone shed some light ?
Thanx
Umpa....

Duh. I read your post completely. The reason behind asking for specs is simply to investigate issues with older CPU's running the newer Bios's and vice versus. Yes there are known issues but as you are not going to supply specs then I am not going any further either. However you already have guessed my point and yes I have one of those MB's myself and can tell you firsthand what happened to me when I ran my older CPU with the newest Bios.
While that may or may not be the answer think about this;
This guys calls up a car mechanic and asks if he can help him with his car. The guys tells the mechanic that it makes a noise when the engine is turned on.
The Mechanic replies that he would like to know what type of car this is and if he can describe the noise.
The customer says, It's a red car and it growls.
The Mechanic replies that it would cost aboy $50,000 to fix.
The Customer is floored as he does not understand.
The Mechanic replies that without further info the best he can do is to replace the entire car.
Granted that is kind of a stupid story but rememer that we don't have a crystal ball. The symptoms you describe with out us knowing more could be a few different things but trying to give an appropriate answer is difficult to pinpoint better without good info. It could be the RAM, the PSU, the Bios or maybe a setting. It may even be something stupid like the RAM socket combo your using. LMAO Yes that can also lead to this kind of thing happening as it did for me when I first got mine setup. I also had stability issues until I changed from sockets 1 and 2 to 1 and 3.
Ao you can see there is no single answer that will fit. I could care less about what hardware you run nor can anyone else here other than to help you. So go ahead and be stubborn about helping us help you. It's your rig that needs help not ours.

MSI K8T NEO-FIS2R Sound Problem

Why does the sound cut out after a period of about 5 hrs or more it completely stops in windows XP havent tryed any other OS, i keep having to restart the computer to bring the sound back!
Any help on this would be greatly Appreciated

Quote
Originally posted by joshr45
Why does the sound cut out after a period of about 5 hrs or more it completely stops in windows XP havent tryed any other OS, i keep having to restart the computer to bring the sound back!
Any help on this would be greatly Appreciated
Do you have LiveUpdate installed (or whatever it is called)? When I was using the onboard sound (moved to an Audigy2 ZS) the sound would go once Live Update had searched the web for available BIOS/Driver updates. I only had mine set weekly but sods law meant that I ended up with no sound for a Rugby World cup I had recorded on my AIW pro (aaaarrgghh). It would only come back with a reboot.
Alex

Msi k8t neo fis2r problems part 3

sometimes when the computer is turned on it just turns the fans and leds on but doesnt boot up...
most of the time it loads up and i boot to the windows xp cd and i install the drivers for sata and then when it reaches the point of copying the files it will give me a bsod and say that there is a problem with the irql driver and then force me to shut the pc down..
sometimes it makes it past that and will begin to copy files onto the hard drive, like somehow the data is becoming corrupted..however it will start to say that the files cant copy randomly and it will allow me to retry..they will copy the 2nd time usually..i can keep hitting retry and it will usually go by..it gets to 30 something % and then crashes to bsod just giving me some random error..for some reason the files keep screwing up that go on the sata drive....I just replaced the old power supply that wasnt working with an antec true watt 430 watt power supply, so i know it isnt that..
i just cant figure out what the heck is going on..any help would be appreciated.my specs are
"IRQ NOT EQUAL OR LESS"
athlon 64 3000+ cpu
msi k8t neo fis2r motherboard
mushkin special cas 2.0 2-2-2-5 512 mb pc 3200
western digital 8mb cache 80 gb sata hard drive
sapphire radeon 9800 pro 128 mb 8x agp

fyi look an your cd sticker ity will show power, consumption, but they are way lower than you would think, hard drives,can be only 10 watts, less then some case lights , and fans, cd are similar.. your video, is the biggy somewhere between 90~150 watts..yikes .next to the cpu..and the mobo can use 50 or so (not sure about new mobos) not to mention the ram 1024 is @40 watts or so., dont forget about 25watts per pci card, not counting the sound card which can be double....
ergo the need for a big psu..
the combined total ratting on a psu is not the max number that the psu is rated, that is surge value.. so a 500 may only hold 400 sustained , and that will drop as the machine heats up, so in the end your 500 may onlyy pull 366 @50'c...

Problems with OC in MSI K8T Neo FIS2R!!!

Hi!
I have faced problems when making OC in my Athlon 64 3400+. I do not obtain to increase the FSB for 213Mhz more than without that they occur stopped or reset. I am using 1Gb (2x512) of Ram (Corsair CMX 3200LL PRO).
In the internet many stories exist that chip VIA K8T800 is not good for OC, because the AGP/PCI cannot be stopped with fixed values.
Exists some form to obtain with stability in this Mobo one overclock descent, with FSB of at least 220Mhz? The lack of stability in overclock limits the processor very, what it finishes in forcing to who knows to abandon the K8T Neo, passing to a Mobo that uses Nforce3 250, for example.
If somebody will be able to help with tips to try one overclock for FSB in 220mhz with stability would be very grateful, friends!
my system
Athlon 64 3400+ (cooler venus 12)
MSI K8T Neo FIS2R
1Gb Ram (512x2) Corsair CMX 3200LL PRO
ATI Radeon 9800XT 256Mb
120Gb SATA Maxtor 8mb buffer
Audigy 2
420W Thermaltalke
Case Lanfire Thermaltalke
Monitor LG Flatron 17 700P
CD/RW+DVD
LAN (adsl 400k) + Fax Moden (56k)

Take your sata drive off and you can overclock higher. There is no PCI/AGP lock so the speeds are affecting your sata drive. 210 mhz. system clock is about the limit before the sata drives start to act up.
The problem is with that particular VIA chipset. No way around it has been found to work in a practical manner.

K8T Neo - FIS2R (model 6702) SATA and RAID Problems = Hair Loss

Hi All,
new to the forum, have searched but nothing like my problem exist.
I have a K8T Neo FIS2R M/B and trying to get a single SATA HDD working for my secondary drive. primary is a IDE which works well and I want to leave it.
I have plugged in the SATA HDD into the SER 1 port ( Promise 237 ?) anyhow the bois at startup or post recognises the drive, but then says soemthing like you have set up raid before F1 for setup F2 to continue to boot.
I have pressed both f1 and F2 at various time, but it appears that it want to turn the single drive into a RAID system, which is not possible with one drive !!....
Anyhow windows XP then boots up and loads a RAID driver and also the promise RAID drivers. the real problem is that XP sits and waits for the raid which never comes and during startup on XP. it is extremely slow.
Does anyone have any ideas. I am not that computer techy as you can see by the description, but it appears that I cannot get into the RAID bios to turn it off.. I have zapped the bios to try and reset it. basically i am loosing my hair ove this.
if anyone had some step by step instructions how to prevent raid from switching on at the bios and then in XP it would be greatly appreciated
Jeff

Hi All,
Sorry for the slow reply, retrieving the box from the bottom of the swimming pool !!!
I set it to SATA as you have indicated Hans, I did check that setting. Thankyou for checking.
Spray, I have tried the P20378 setting as well. You indicate that you need to press F6 when installing the OS. I have WinXP running already on an IDE master and am trying to set the SATA up as a secondary disk drive.
As I indicated above, the machine runs slowly to the point of it being a 486 when I use either promise or Via controllers.
I have since removed the drive and are now having problems with XP on boot up/startup. The thing seems to hang or go slowly when the horizontal bar runs across under the Windows XP logo. I have turned everything off in the bios both Promise and Via. I am at a loss as to why:
1 it runs slowly with the SATA drive in ( also does not show all the auto loading icons near the clock)
2. why it hangs when I remove it and turn both SATA controllers off in the bios.
I have a feeling that I may have corrupted part of the registry playing around. Any thoughts... going bald :-)
I really appreciate the feedback so far

K8T Neo-FIS2R and 2.2 bios problem

I flashed the bios of my K8T Neo-FIS2R to version 2.2.
Everytime I boot the system, I can just see the Windows XP logo appearing for a second, then the system reboots again.
I reflashed from a floppy to version 2.1 again, but still the same problem.
My HDD is a Western Digital SATA drive on the VIA controller.
Can somebody please help me out?
THX!
Marco

Thanks for your support!
After reflashing to 2.0 I still had the same problem.
The bios was not causing the problem. In some way, Windows couldn't load the SATA driver properly, I think.
I removed the SATA HDD from the VIA controller and connected it to the Promise controller, and surprisingly, Windows started again.
The HDD LED works on the Promise, but not on the VIA, so I left the HDD on the Promise controller. The LED problem is now solved as well.
I still don't know exactly what was going on. Anyway, it wasn't MSI or the new bios, it was Microsoft...
Marco

K8T Neo-FIS2R V1.0, CPU Speed Problem

Hi, I got a Athlon64 3500+ (NewCastle) and K8T Neo-FIS2R V1.0 MotherBoard
Just downgrade my bios from 9.2 to 3.3 since the 9.2 bios does not show the correct +3v voltage in the core center and the website is recommending that old version of Athlon should use 3.xx bios.
But the problem occurs, the core center now shows the cpu speed is 1xx rpm and keep sending alarm. I use other software to check the fan speed and it is 2xxx rpm. The temp of the cpu is between 33 to 43 'C.The temp of the case stays at 42 'C. The voltage of the CPU is 1.52-1.53V. One time, somehow the temp of the cpu went up to 50'C but the fan is not turning faster to cool down the CPU. No matter what models (Cool&Quiet or User) I choose in the core center, it just did not go faster. Finally, I have set full speed of the fan in the core center to increase the speed of the fan.
My PSU is Enermax 450W, and I used 5V for my three case fans since they are really noise.
Any problems with my system or computer, or any recommemdation?
Sorry for my English, but I am doing my best.

Everest just has no readings that work for us. They never supported our board. None of the software gets a correct read on our 3.3v so no there is no answer. I have tried them all as have others. If reading the 3.3v is that important to you use a meter.
I have yet to ever trust Core Center. It lies. Keep in mind just how many MSI products it is used in. So far it has yet to be that accurate in any Via Based MSI product. Search the forum here for it. No one seems overjoyed with CC.

Help! XP install problems with K8T Neo-FIS2R

The other day I put together a new system for a friend. I got the system to POST properly, the diagnostic lights on the D bracket are fine, and I can edit the BIOS, and the BIOS sees all the drives properly.
However, installing XP Pro has been impossible. I set the system to boot first to the CD, then to the hard drive (from the BIOS). After booting to the CD, I never see the message I am used to seeing ("Press any key to boot from CD...) when booting from the XP Pro install disk. The system thinks about things for a long time with a blank screen, then later it finally begins to do the install. Things appear normal at this point as in any other time I have installed XP Pro. I reformat the hard drive to start clean and then the XP install files are copied over. I get the standard message that the system will reboot and this is where things get flaky. The system reboots, but I never get the message once again on whether or not to boot from the CD. So after a while the system tries to install XP once again (it would repeat this process forever....trust me). I've popped the CD out right after the system reboots so it will try to go to the hard drive. I just get some kind of boot failure message and to insert the bootable media or whatever. I've even gone into the BIOS right after the reboot to switch the BIOS loading to try and load the hard drive first. This still doesn't give me the desired results.
This is by far the weirdest thing I've ever experienced when doing an install. I've installed XP Pro on at least 15-20 desktops/laptops of different configs and never ran into this before.
The BIOS settings are stock. I didn't see anything in there that was really needed tweaking or that hadn't "set itself". I haven't messed with the SATA or RAID stuff since it's not really necessary in this situation.
Here are the system specs:
--Antec 430 True Power PSU
--K8T Neo-FIS2R mobo
--AMD 3000+ 64 bit CPU
--40GB Maxtor HD (master on IDE1)
--Lite-On DVD-ROM drive (slave on IDE1)
--80GB Western Digital (8MB buffer) (master on IDE2)
--Sony DRU510A DVD-RW (slave on IDE2)
--(2) Kingmax 184 Pin 512MB DDR PC-3200 Model# MPXC22D-38
--ATI 9800 Pro
--3.5 Floppy
All the components except the mobo, CPU, and memory are from another AMD system that was running fine. No problems with any of the HD's or the optical drives. All new components were purchased from newegg.
I thought that maybe I had a problem with the jumpering of the drives so I messed with those in about every possible combination. I took IDE2 completely out of the system and just tried to get it running with the 40GB Maxtor and the Lite-On drive. I tried about every master/slave/cable select combination but nothing was working. In certain combinations the BIOS recognized everything as I intended. I've pulled everything off that doesn't need to be connected. Keyboard, monitor, and internal components are the only things connected.
I don't consider myself to be a guru at this business, but I can get through most things with enough trial and error. This really has me stumped.
Any help is certainly appreciated.
Thanks,
Heath

Quote
Originally posted by chasmon
Hi all,
I have just setup up a brand new system but am having probelms getting it working. I want to install XP on a single Maxtor 160Gb drive.
I have my HD on Promise Ser1 and all SATA stuff in BIOS enabled. When I get to the screen I press F6 and then when promted I insert the floppy with the promise drivers on. I then get this message:
"File txtsetup.oem caused an unexpected error (4096) at line 1742 in d:\xpclient\base\boot\setup\oemdisk.c"
I can't get past this screen I have tried:
1.Drivers from the CD supplied.
2.Drivers from the MSI website.
Please help me this lot cost lots of hard earned I'm pretty gutted at the moment.
System:
Antec 380W PSU and Sonata Case
LG DVDROM 8163B
NEC DVDR/RW 2500B
Panasonic Floppy
Neo FIS2R mobo
Maxtor Diamondmax Plus 9 160Gb SATA150
Benq RF K/B & Mouse
Download the drivers from MSI again, and when you copy the contents of the XP folder to floppy ADD the file txtsetup.oem from the directory above that folder. Worked for me..!
Ian

K8T Neo FIS2R (MS6702) cool n quiet problem

Hi. I have an AMD64 3000 cpu installed. The cool n quiet variable frequency is not functioning anymore. Core Center reports it at 2000mhz all the time. As a result, it is running hotter than normal and is not as quiet. I tried the latest bios (ami v2.2), the latest amd64 driver and the latest core center. The system did not like the newest amd64 driver (shutdown just as windows finished loading) so I went back to the previous versions of everything. It did work at one time but something must have changed.
System Specs:
K8T Neo FIS2R (MS-6702)
AMD64 3000 socket 754 (clawhammer or newcastle I think)
chipset K8T800
bios AMI v1.9
amd64 driver v1.2.2
Core Center v1.5.5.0
cool n quiet enabled in bios setup
dynamic overclocking disabled
Thanks for any input
Pete

Ok, this is nuts. I think its time to clear the cmos. I'm now using speedfan and even with the max speed setting for the cpu fan at 1% (one percent), the cpu fan runs at around 3800. Then it drops to zero when the set cpu temp is reached (40c). There's no in between. When I start the system, its max'd at around 4400. I pulled the fan and heatsink to clean them last weekend and it seems that's when all this started. Perhaps something went awry when I disconnected and reconnected the fan to the board. The bios version, the amd driver, and the core center version are now all the same as before I pulled the fan. I'm clearing the cmos.

Msi k8t neo fis2r xp install problem

I tried to install xp on my sata drive..i downloaded the raid drivers and put them on a floppy, it accepts the raid drivers (im not trying to use raid, just regular sata), and i select the hard drive and attempt to install to it, but the files from my xp cd keep saying something about invalid image has been installed to your hard disk (or a similar message to that)
also part of the time the comp will not boot properly, it will just beep on and hang and nothing will show to the monitor, or if i have a disc in my cdrom when i try to turn it on it wont turn on, but then when i take out the disc and reboot the comp it turns on again..no clue what might be going on..
my specs are
a64 3000+
512 mushkin special 2-2-2-5 cas 2.0 ram
80gb WD SATA 8mb cache HD
radeon 9800 pro (sapphire)
MSI K8T NEO FIS2R
sparkle 400 watt power supply

You better get something like an Enermax 465 for your rigg, as yours:
Quote
Output: [email protected]/28A,+5V@40/28.5A,[email protected],+12V@15A,[email protected],+5VSB@2A
Could blow to pieces any minute now....
15A @ 12V is way too light.....
The Enermax has 33 of them

Problem with MSI K8T NEO-FIS2R

When I boot my computer I get a message invalid boot.ini then it says c:\windows and windows starts normaly. What I don't understand is why do I get invalid boot.ini Anyone knos how to fix this?

I'm sorry for no specs. Here you go
MSI K8T NEO-FIS2R
AMD 64 3000+
2X 512MB 400MHz Ceon CL=2,5
HDD 120GB WD
HDD 4GB SEAGATE
CDR DVD-RW NEC ND3520
CDR SONY
400W POWER SUPLY
primary master CDR DVD-RW
primary slave NONE
secondary master CDR SONY
secondary slave HDD 4GB
and last HDD 120GB on primary raid
NONE on secondary
I have ORIGINAL windows xp with sp2 on 120GB HDD. I bought this computer and they put windows xp on my system.

K8t neo fis2r framerate problem

Similar Messages

Maybe you are looking for