K8t neo fis2r overclocking

I am hoping i can get some sort of overclock out of this board. I know without the agp/pci lock it will be limited. But I was wondering if anyone out there has any input on what i might be able to expect before I get too crazy with it. I planned on using the Dynamic overclocking but I dont know whether I will get results with that. Any help is appreciated.
I am currently running:
Athlon 64 3000+
MSI K8T Neo FIS2R
1GB Mushkin LVL II pci 3500
connect3d radeon 9800 pro 128 mb
2x western digital raptor 36gb in raid 0
420W Power Supply

Malenfant:
Didn't do anything special, I just worked up to that point increasing in steps of 5. Wish I could give you a suggestion, but it just worked. stays cool also under a 100% load 24/7 (foldin) I run temps of 38 to 40
Join the MSI FOLDING TEAM............Please we can use the help

Similar Messages

K8T Neo-FIS2R Disable Overclocking Completely!

ok so this is really startin to pee me off
ive got the latest BIOS for my K8T Neo-FIS2R (2.22 i think it is) and it seems to have no way to turn off the Dynamic Overclocking Technology (DOT) crap.
I have disabled cool n quiet, spread specturm and dynamic overclocking yet when my computer loads i have core centre loaded at startup, when i fire off a heavy app (something java'ish usually does the trick) the processor speed whacks itself up to anywhere from 3000-8000mhz and then drops back down to the lovely 2200mhz which it should be running at (its and Athlon64 3400+ chip) problem being i dont want it to do this - i want a stable system and this is causing me major headaches as there are short periods where it seems to almost freeze as the processor is changing from one speed to another
anyone any ideas on how to totally disable DOT before i ditch it and go back to a P4
thanks
ste

Check your BIOS revision with live update or watch the screen on boot up. Are you really using 2.22 or 2.18? If you are, try a BIOS version that isn't beta. Beta versions all end with a digit in the hundredths place, you should go for 2.0 as the jury is still out on 2.1 and 2.2. Get it here I'm currently stable at 1.9. Also, I'm still using Corecenter v1.6.0.0. I found that all of the newer ones (as of 6 months ago) caused a hiccup on speed changes and actually caused a little performance hit. If you want the old version of Corecenter I have, PM me and I'll email it to you if you can't find it elsewhere.

PSU for K8T Neo-FIS2R

What model of PSU has its cooling fans which can be controlled from PWFAN1 and PWFAN2 on the K8T Neo-FIS2R motherboard?
Kaz

Sorry but there is no real specific one out there that I have ever seen. Most of the Bios options you see have been available since forever with Via Chipsetted boards. However DOT is specific to MSI which is Dynamic Overclocking technolodies. DOT can automatically overclock your voard depending one what your doing. I recommend staying away from it as it can cause as many issues as anything in your rig. And then there is Cool and Quiet which is an AMD 64 Bit CPU specific option to downclock the multipliers for the CPU during Idle Times to save energy and keep the CPU cool. Again it is not really needed.
The rest of the stuff you can use google to find individually or by searching for Award Bios's or Via Chipset Bios settings.
These are way to much for any one person to post a complete guide to here as all the info is readily available elsewhere.

K8t neo fis2r - core center not functional after installing sound card

Hi. I had been using Core Center with Dynamic Overclocking enabled and all was well. When idle, my amd64 3000+ (2.0ghz), was running at 800mhz. Under load it would go up to 2100mhz. But yesterday, I installed an Auzentech x-plosion sound card and after i installed the driver, the dynamic overclocking stopped working, my cpu is running at max all the time. (The variable fan speed function still works).
I checked the IRQ and there is no conflict, I uninstalled the amd64 driver and core center and reinstalled. Still does not work. I uninstalled the auzentech driver, rebooted, and cancelled new hardware wizard. Then the variable cpu frequency feature worked. Once I install the driver for the auzentech, dynamic oc stops working. I was thinking to try another pci slot but it appears to be a software issue rather than a hardware issue. The new version of Core Center does not work with my board even though msi says it's compatible so I'm still using the one that always worked. The amd driver is the latest and also always worked.
Has anyone else had a similar problem, perhaps using the auzentech sound card with this board and Core Center? Or does anyone have any suggestions?
Thanks!
K8T Neo FIS2R
AMD64 3200
AMI bios version 2.2
1.5Gb pc3200 memory
nvidia quadro FX 1100 128mb AGP
Antec 430W ps

Hey guys, I just went to AMDs site to get the dashboard utility mentioned and in the readme, it stated that in XP, the power option needs to be set to portable/laptop. But in the past, I read that it needed to be set to "always on" and that it is, in fact, what I had it set to before when cool n quiet was working. Now I change it to "portable/laptop" and it works and set to "always on" doesn't work anymore. So now Core Center reports I'm at 33c @800mhz at no load. I don't get it??? I'll have to try an alternate utility just to verify that is indeed working.
btw, QV, I checked system properties, (right-click my computer > properties, or "system" in control panel) and on the "general" tab, it indicates an AMD64 3000+, 2.0GHz. But I'm pretty certain the clock frequency is dropping now as reported by core center because of the decrease in the cpu temp at idle. Am I looking in the right place in XP? I have XP pro, SP2
Again, thanks for the input and Happy New Year

Calling all old MSI K8T Neo-FIS2R users

Ops i posted this in the wrong forum first time, this is the right place
This for all MSI K8T Neo-FIS2R users, that have changed to the new MSI K8N Platinum nForce3 250 mobo, if I have the chance to swap to the new board should I do so, or does this mobo have its fair share of problems?
Is the MSI K8N Platinum nForce3 250, a better board compared to the old MSI K8T Neo-FIS2R? Not taking into account overclocking.
Like is the onboard sound the same or worse or better in your opinion? Is it any faster at stock? Are there any other advantages?
Thx Xe

I had a K8T Neo Fis2r at first. I got a K8N Neo because I believed my Blue Screens were a faulty K8T Neo. As it turned out, the Audigy2 I had in there was the problem, because I still got Blue Screens with the K8N Neo, and when I took out the audigy and used onboard my system ran stable.
I havent had any of the apparent keyboard controller problems, or ANY other problems with the K8N. My only instabilities have been the Audigy2's fault.
Havent tried overclocking on the K8N Neo yet, maybe a little down the road. As far as features go, the K8N has the hardware firewall on it (which I dont use) but apparently its "true" gigabit ethernet is better than the K8Ts. Dont ask me to clarify that, lol
btw Got my turtle beach Santa Cruz today and put it in my K8N Neo, crossing my fingers... =\

Problems with OC in MSI K8T Neo FIS2R!!!

Hi!
I have faced problems when making OC in my Athlon 64 3400+. I do not obtain to increase the FSB for 213Mhz more than without that they occur stopped or reset. I am using 1Gb (2x512) of Ram (Corsair CMX 3200LL PRO).
In the internet many stories exist that chip VIA K8T800 is not good for OC, because the AGP/PCI cannot be stopped with fixed values.
Exists some form to obtain with stability in this Mobo one overclock descent, with FSB of at least 220Mhz? The lack of stability in overclock limits the processor very, what it finishes in forcing to who knows to abandon the K8T Neo, passing to a Mobo that uses Nforce3 250, for example.
If somebody will be able to help with tips to try one overclock for FSB in 220mhz with stability would be very grateful, friends!
my system
Athlon 64 3400+ (cooler venus 12)
MSI K8T Neo FIS2R
1Gb Ram (512x2) Corsair CMX 3200LL PRO
ATI Radeon 9800XT 256Mb
120Gb SATA Maxtor 8mb buffer
Audigy 2
420W Thermaltalke
Case Lanfire Thermaltalke
Monitor LG Flatron 17 700P
CD/RW+DVD
LAN (adsl 400k) + Fax Moden (56k)

Take your sata drive off and you can overclock higher. There is no PCI/AGP lock so the speeds are affecting your sata drive. 210 mhz. system clock is about the limit before the sata drives start to act up.
The problem is with that particular VIA chipset. No way around it has been found to work in a practical manner.

MSI K8T Neo-FIS2R - Suggestions

Hi,
I have just ordered these parts:
AMD Athlon 64 3200 (Socket 754) - Retail (CP-060-AM)
Asus DVD-E616P1 16X DVD-ROM / 48X CD-ROM - Retail (CD-002-AS)
Western Digital Caviar 120GB Special Edition 8MB Cache Serial ATA - OEM (HD-009-WD)
Antec Sonata Piano Black Quiet Case - 380W TruePower Silent PSU (CA-003-AT)
MSI K8T Neo-FIS2R (Socket 754) Motherboard (MB-010-MS)
Sapphire Radeon 9800Pro
I am still stuck on RAM, despite searching other topics. Which PC3200 RAM actually works to the speed that it should, I'm not convinced by the MSI list.
Will Kingston HyperX PC3200 work to its full standard? I was initially looking at KingMax PC3500 RAM which is a lot cheaper, however it seems pointless to spend so much on quality parts and then get cheap RAM(although PC3500 should be faster, I assume it shouldn't make any difference if I'm not overclocking). I don't think I can quite afford Mushkin RAM, as I have about £220 for 1GB.
Secondly, with my PSU be able to power the system without overclocking?
Thanks for any ideas.

I would also suggest a better PSU, I had a Enermax 350W before and it only just coped + a high pitched whining sound
Plus a Pentium 4 and an AMD64 = not equivalent in terms of power consumption. If you already have that PSU, then fair enough try it. But if your still planning to buy it... I would go for a better one. Just my 2 cents

K8T Neo FIS2R (MS6702) cool n quiet problem

Hi. I have an AMD64 3000 cpu installed. The cool n quiet variable frequency is not functioning anymore. Core Center reports it at 2000mhz all the time. As a result, it is running hotter than normal and is not as quiet. I tried the latest bios (ami v2.2), the latest amd64 driver and the latest core center. The system did not like the newest amd64 driver (shutdown just as windows finished loading) so I went back to the previous versions of everything. It did work at one time but something must have changed.
System Specs:
K8T Neo FIS2R (MS-6702)
AMD64 3000 socket 754 (clawhammer or newcastle I think)
chipset K8T800
bios AMI v1.9
amd64 driver v1.2.2
Core Center v1.5.5.0
cool n quiet enabled in bios setup
dynamic overclocking disabled
Thanks for any input
Pete

Ok, this is nuts. I think its time to clear the cmos. I'm now using speedfan and even with the max speed setting for the cpu fan at 1% (one percent), the cpu fan runs at around 3800. Then it drops to zero when the set cpu temp is reached (40c). There's no in between. When I start the system, its max'd at around 4400. I pulled the fan and heatsink to clean them last weekend and it seems that's when all this started. Perhaps something went awry when I disconnected and reconnected the fan to the board. The bios version, the amd driver, and the core center version are now all the same as before I pulled the fan. I'm clearing the cmos.

MSI K8T Neo FIS2R- Corsair Twinx XMS4000

Two weeks ago I have bought one MSI K8T Neo FIS2R with an AMD Athlon64 3200+.So far I used the computer with one DIMM of 256MB DDR PC2100 memory. This morning I have installed in the motherboard a pair of CORSAIR TWINX XMS4000 which comprises of two DIMMs of 512MB DDR 500MHz memory.
The computer did never worked again. As soon as I have turned it on, although the whole system got power the screen was blank and the motherboard did not boot. Moreover, the D-Led system of the motherboard has all its leds red which according to the manual means that the processor is probably damaged.I have never overclocked my system and before install the memory it worked perfect. I have disconnected the whole computer but the problem still exists. Can you advise me what I have to do to fix it? What is the cause of the problem? Is there any way so that I can fix it?

Quote
Originally posted by karinio
Two weeks ago I have bought one MSI K8T Neo FIS2R with an AMD Athlon64 3200+.So far I used the computer with one DIMM of 256MB DDR PC2100 memory. This morning I have installed in the motherboard a pair of CORSAIR TWINX XMS4000 which comprises of two DIMMs of 512MB DDR 500MHz memory.
The computer did never worked again. As soon as I have turned it on, although the whole system got power the screen was blank and the motherboard did not boot. Moreover, the D-Led system of the motherboard has all its leds red which according to the manual means that the processor is probably damaged.I have never overclocked my system and before install the memory it worked perfect. I have disconnected the whole computer but the problem still exists. Can you advise me what I have to do to fix it? What is the cause of the problem? Is there any way so that I can fix it?
Hi dude i had identical problem, bought i extra stick 512 400 ddr and the system wont start. Make sure your motheoard support the made of ram. In my case Asus did not support corsaire. Also it could be the slots which are damage.
bye

Do k8t neo fis2r have agp/pci lock?

Hi
I just read a test of my motherboard (MSI k8t neo fis2r).
I was written that the motherboard had a agp/pci lock.
Does it so? I dont want to damage my 9800xt with to high agp bus so i need to know! please

Simple fix... Don't overclock the system clock or what people mistakenly reffer to as the Front Side Bus (FSB)... The issue is not just with the motherboard but rather with the VIA K8T-800 chipset. The Hyperthreading, PCIO, and AGP are all tied to the system clock so when you change that clock everything is affected. Some things can handle it and some things can't. If you leave the system clock alone then there are no worries.

Booting "issues" with K8T Neo-FIS2R

Well hello everyone. First of all I want to say that my English isn't completely error-free and my problem might seem awkward because of my ways of expression.
I also want to say that i've read alot of threads and searched the forum for my problem.
For a couple of days ago I got all my parts for building my 64bit-system and I build her up. To my suprise it booted, with almost no errors. Although I could install Windows XP and use it completely, everytime I boot it (under the booting sequence) it says "Bios is not installed", although I can enter bios simply (like everyone else) just pushing the DEL-button.
But this isn't the only problem. When I enter PC Health Status it says that the cpu is running at whooping 62-65 degrees. When i have my hand around the cpu-cooler it doesn't even feel warm so I think it has something to do with my BIOS-version that i am running now (Yes, I've read that in much more threads)
Also I have problems using the Cool'n'Quiet technology. I have it supported in the BIOS and activated it although it will not work (maybe it has something to do with the bios?) With this i mean that i will not go underclocked (It's allways 2.2 GHz)
My final problem is that it sometimes takes the system 2 minutes to boot sometimes, it happend after i flashed the bios to 1.7 from 1.0
Under these circumstances I've used 1.0 AND 1.7 BIOS-versions.
I've never overclocked the computer either.
What could be wrong?
I'm using 3200+ 2.2GHz Athlon 64 cpu.
K8T Neo-FIS2R
Radeon 9800pro
Seagate 7200.7 200GB drive.
380W Antec PSU.

Quote
Originally posted by $post[username]
I've tested notebook, minial power savings and battery. C'n'q still doesn't seem to work. Yes i've enabled it in bios. I downloaded the AMD Athlon™ 64 Processor Driver for Windows XP, Version (zip) 1.1.0.14 -
Yesterday my CnQ began to work fine. I've done the same as you:
1- Enable CnQ Bios option
2- Install the AMD athlon64 driver for XP
3- Set "minimal power savings" at windows xp energy options
I have installed the CoreCenter 1.6.8.0 (is the last version) utility, and I've set enable the CnQ in this application. You'll can see that the CPU velocity change "on demmand" and the CPU fan too.
Of course, I've the last VIA 4in1 drivers, 1.7 Bios ver. etc
My temp & MHz values are:
~40ºC ~ 800 MHz idle
~50ºC ~ 2000 MHz playing or that kind of stuff
Note that the PC case is open, because the PC is under my table and there is no good ventilation.

Onboard 5.1 sound noisy - K8T Neo FIS2R

Hi guys, i'm new here.
Well, i got a K8T Neo FIS2R and the 5.1 sound is noisy. I've tried many different drivers, replaced my 5.1 speakers for new ones and it doesn't work properly at all. I've been using a 2.1 system and it works just fine. Has anyone seen this problem? any advice?
Thanks in advance
Kein

LOL OK you can save us time by replying to that end the next time. Thanks.
I know it may seem trivial but I can't count how many times a suggestion was assumed to have been tried and it turned out to be the fix in the end. So if we seem grouchy about getting a reply remember that we aren't the only one's that waste time chasing stuff when no one let's us know what they have tested.
OK back to your problem. There are no magic buttons to push. If you have tried other speakers and drivers then it is likely something on the MB that is causing the problem. It could be a power line somewhere close to a chip or connection, it could be a bad ground. If you have a Sound card handy you could also check it to see if the problem goes away. Otherwise you may have to RMA it.

Should I flash the bios? K8T NEO FIS2R

Ok... I have a K8T NEO FIS2R mobo. A couple of friends of mine have been telling me to flash the bios to the most current version... Then some other people have been telling me that it is too risky and I should hold off untill something goes wrong that I know a bios flash can fix...
I'm just wondering what is the concencious here... should I flash it, or should I stay with the current version I have now(the one that came with the mobo) I Like to have my computer as up to date as possible, but all the reports of bad flashes have me a little worried. This is a procedure that I have never done before, and I dont want to mess it up.
If I should flash, Any insight, tips, tricks, special instructions, etc... would be greatly appriciated.
Thanks!
Magnum

Thanks guys for the quick responces... I'm used to not getting a responce from forums for 12-24hrs and here it is less than 24hrs later and I have 10 responces.
I'm not at my computer in question right now, but I am almost positive that my bios is ver1.0. Same one that came with my mobo.
At this point I am leaning towards flashing... If basically the only way to mess it up is to have my power fail, then I dont think I will have a problem. I'll just borrow an UPS from work here to be on the safe side.
hypothetically if i follow the instructions to a tee(windows flash/live update) are there any other ways it can mess it up? I just want to get a hold on all the places where I could mess it up.
Will live update take me all the way through the procedure, or do I need a separate set of instructions to read off of during the flash?
Also what gear will I need... floppy disk? anything else?
Sorry about all the questions, just want to make sure I do this right the first time!
Thanks!
Magnum

6600GT not working with K8T neo-FIS2R

I recently returned a K8T NEO-FIS2R MB for repair. The problem was that the PS/2 and USB ports were broken. However the MB has been returned and the PS/2 and USB ports work fine. I posted about this several months ago.
Now the AGP port seems to be broken (not the actual slot). I have tried a 6800 Ultra and a 6600 GT (AGP version) GFX card in this slot. Both cards fail at the driver installation point. I have tried driver versions 66.93, 67.02 and 67.03. I also tried 3 versions of the via drivers 451, 453 and 455. Even tried XP with SP1 and SP2. The PC will sometimes BSOD, reset, won't boot into windows. The drivers sometimes install then other times they won't, etc. The problems only seem to be with the drivers for the GFX cards.
The 6600 GT works as I have tried it in another MB without any problems.
I know the memory works fine as I used memtest86+ for a couple of hours on the default settings without any errors and it works in another PC.
The spec of the PC is:
XP pro
K8T NEO-FIS2R MB
512MB corsair XMS at 2.5-3-7-3
XFX 6600GT
40gig HDD
FDD
Plextor CD writer
DVD Rom
PSU is a Q-tec 550W
I know Q-tec PSUs are not up to much from what I have read elsewhere in this forum, but I have had it running in a similar system with the 6800 Ultra installed without any trouble (even with the above MB before it went faulty). I have also tried a 400W PSU, that came with the case. The Voltages on the 12V line are between 12.00 and 12.03 when using the Q-tec PSU.
Has any body else had these problems with the 6600GT in the mentioned MB.
Also, how can I check the serial number on the MB with the label on the box, as this MB that was returned to me looks to “clean” to be the one I sent away for repair.
Thanks for any help

Hey, I'm glad to see a post on the new Gforce 6600GT AGP card. I just recently put together a brand new system (see my sig for specs). System runs great. The only thing I wanted to do was replace the video card, and after a great deal of anxiety I decided the Geforce 6600GT AGP was the best bang for the buck.
Well I got home, installed the card and never get passed the bios screen. (shows your processor, memory, memory siz), the screen u hit DEL to go into the bios.
The system doens't lock up, NUM LOCK can still be turned on and off, and CAPS can be turned of and on... but thats it. Just sits on that screen. I can't go into the bios either.
what settings do I need to do prior to isntalling this card to get it to work.
Let me know if you all need anymore details to help me out.
oh, I did reset my frequency to 10x200 (which is what I think the 3000+ is supposed to be at).

K8T Neo-FIS2R - 3200+ - Mushkin Level 1 RAM: Optimal Memory Settings

Just got a K8T Neo-FIS2R with a AMD Athlon 64 3200+ with 1g (512MB X
2) Mushkin Level 1 PC3500 RAM as recommended by Anandtech on his High
End System roundup:
www.anandtech.com/guides/showdoc.html?i=2041
I am having a HUGE problems with memory settings in the BIOS.
On AUTO, the memory is only autodected at DDR200, which I found odd.
I them took memory setting in my old hands and things don't seem much
better:
I made these changes:
MEMCLOCK: DDR400
BANK INTERVEAVING: AUTO
BURST LENGTH: 8 BEAT
CL: 2
TRCD: 3
TRAS: 5
TRP: 2
This was unstable at first and bumped the DDR Voltage to 2.7, moved
the sticks to DIMM1 and DIMM3 (instead of DIMM2), and it seems stable,
but not very fast. according to Sandra Scores
Any recommendations for Memory Settings? Why would the MB not
autodecte DDR400 RAM? I am not looking to overlock...just maximize
the CPU and memory I have.
Maybe I just need to get new memory. What is the best memory for this motherboard?
Thanks,
Steve

I'm running the same mem (see my sig). Since its PC3500 I attempted to tighten the settings to those you had listed (2,3,2,5). It was not Prime95 torture test stable at even the stock 200 MHz FSB using these settings. Upping the voltage to 2.7 did not increase the stability in my system at these settings. The memory ran perfectly at AUTO settings, but was clocked at 2.5,3,3,8 I believe.
Keep in mind that level 1 is advertised at 2,3,3. My system is 100% stable at 2.7V for me up to 210 MHz FSB at these settings (I haven't tried any faster). My TRAS is set to 6.
Hope this helps a fellow Mushkin user

K8t neo fis2r overclocking

Similar Messages

Maybe you are looking for