K8T Neo FSR - Ethernet controller driver?

Hello everyone,
I have been having zero problems with my mobo until turning it on this morning and now it can't find the driver for the RealTek onboard ethernet controller. I have put in the driver CD that came with the mobo and have it search and it says it can't find an appropriate driver. I downloaded the latest driver from the MSI website with the same problem. Any ideas on how to install the driver? Another question is in the driver folder for the Gigabit ethernet, (running Win XP with an AMD 64 processor) do I want the driver from "WinXP" or the "AMD64" folder to try?
Cheers,
Tom

First go into integrated Pheriferals in Bios and turn the LAN back on. Next use XP drivers on XP and XP64 drivers on X64 or XP 64 Professional. XP is 32 bit and X64/XP64 are 64 bit and require different drivers.

Similar Messages

K8T Neo FSR - ethernet contorler driver no working

Hello everyone, I have a motherboard K8T Neo FSR. 3 days before I reinstall the operating system (Windows XP) on the computer, I installed the drivers for my motherboard but not ethernet.I downloaded the ethernet drivers from MSI site but does not work. Please help.

Quote
but does not work
That is not a sufficient description of the problem. In what way doesn't it work?

K8T Neo FSR Won't Boot!

Hello!
My system doesn't boot . It power all of the fans and disk. The Power and Hard Disk leds stay lit (no blinking) the D-Bracket shows 3 red leds and one green led (green is on the lower left). I try without any disk units, no cards (just my graphic card which I test on my P4 machine and is OK) and just 1 stick of ram. The sytem was working "normally" except for some sporadics blue screens and reboots and the no NVRAM thing and that my RAM gets automatically reset to 200 (that's why I try the 1.92B BIOS ver) Last thing I remember was flashing the 1.92B Bios using the windows utility and after that kaput! What can I do? are there any procedures to fix this or did I kill my mobo?
Any tips suggestions will be really apreciated, many thanks in advance.
K8T NEO FSR
AMD Athlon 64 2800+
Markvision Value RAM DDR400 512 x 2
MSI GeForce4 Ti4200
Seagate Barracuda 80 GB
Old ACER CD-ROM 40x

Hi
The lower left led is inialising the Keyboard controller. ODD if nothing has been changed.
you can reset the comp by clearing the jbat1 jumper. Switch power off first, page 2-25 of manual. If that does not work make a rescue disk. place file AMIBOOT.ROM on floppy put floppy in drive, reboot and press ctrl + home.
But check the keyboard first.
cheers
jocko

[Athlon64] MSI K8T Neo FSR / Early Chipset Initialization

Hi There,
My MSI K8N Neo Platinum has a broken LAN interface, i don't have the papers of it so I can't send it for RMA. So i bought a MSI K8T Neo FSR.
But there is a problem, when i power up the system, the fans are spinning, the hard disk spins up and the CDRW/DVDROM drives are working. The only thing the system does is hanging at the "Early Chipset Initialization" state accoding to the D-Bracket.
- Tried an other VGA Card > No result (Radeon 9200, Club3D)
- Bought other memory (I do have 1GB now , but still no result)
- Tried resetting the BIOS > No result
- Tried removing the RAM, the system beeps there's no RAM in the system, but when i put it back in the system wouldn't boot again.
- Tried to boot up only with R9200, CPU and RAM, and still it won't work.
- Tried to boot outside the case, but still no result.
I tried my processor, memory, PSU and vga card (6800LE) back in my K8N system and it works great, so i don't think my PSU is too weak.
And I aint thinking that my motherboard is broke, it still beeps without memory in it.
I am getting really confused, i'm out of money now so i can't buy some new stuff.
Anyone ideas?
Specs in signature. (PSU 18A @ 12V), sorry for my bad english.

Quote from: fafner on 03-May-05, 20:55:16
Why don't you get a PCI network card for the K8N system? No need to fuss around with a new mb just to get a LAN connection.
Don't want to use PCI-Cards
Quote
Have you tried removing the RAM and then doing a Bios reset? Sometimes things get sticky if the RAM is still in place during a Bios reset.
I would also unplug anything that is not entirely needed to boot so you can simplify the problem.
Another hint. As the RAM controller is inside the CPU the system will not do anything right without RAM. The CPU will imediately hang.
Just tried a BIOS reset without RAM in the system, the system won't boot. Only the CPU, VGA card and the memory is placed. Only the 4pin 12v and the 20 pin is connected.
It just won't work, maybe the board is dead?

K8T Neo FSR with Audigy 1 Problem

I just received a major upgrade, for me anyway, last night. ALL I was getting on boot was 4-RED LED lights on the D-Bracket2 connector. I was ready to RMA the WHOLE thing to Tiger Direct, when I decided in one last ditch effort to try again.....I pulled my Audigy, and wham, it booted normally. Now let me describe.
1. I KNOW it's not a power issue, as I had EVERYTHING but Sound and Video removed, and unplugged, including hard drives. The D-Bracket2 LED's were still all-red on boot.....system would not POST.
2. Pulled ALL hrdware from system, except Video and Audigy, same results.
3. Last try, pulled EVERYTHING, including Audigy, and it booted normally.
4. Re-connected everything, except Audigy, re-installed Windows XP SP2, no problems, system runs.
I tried EVERY PCI slot with the Audigy, ALL with the same results; system would not run with it in there. The card was good 15 minutes prior on the OLD Abit Board. (meaning it works.)
ANy ideas???
System Specs:
K8T Neo FSR MB
Athlon64 2800+ CPU
GeForce Ti 4200 128MB Video
512MB Mushkin Green Memory (1 DIMM)
Maxtor 160GB HD
WD 20GB HD
45X CD-ROM
24X CD/RW (Sony)
onboard NIC, Sound (Audigy problem made me resort to the onboard sound)

Suggestions:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1104458&CatId=1078
The above might be only 420W but it has 18 amps under 12+, which is fine for your setup.
http://www.newegg.com/app/ViewProductDesc.asp?description=17-148-002&depa=1
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=719596&CatId=1079
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=719582&CatId=1078
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1120272&CatId=1078

K8T800 K8T NEO-FSR Memory Problems

Just a warning before I start in, this is a pretty long post. I'm going to try to include all the information I can.
Here's my system right now. It's running Windows XP Professional with all the latest updates.
Processor: AMD Athlon 64 3000, 512KB L2 Cache 64-bit Processor. Not overclocked at all.
Motherboard: MSI K8T800 K8T NEO-FSR, latest BIOS updates from MSI
Video Card: ATI RADEON 9800PRO Video Card, 128MB DDR, latest Catalyst drivers from ATI installed. Not overclocked at all.
Memory: Mushkin 184 Pin 2x512MB DDR400 PC-3200, running at DDR400 with Auto selected for all the memory timings in the BIOS. Memory placed in DIMM#1 and DIMM#2. Not overclocked at all.
Hard Drive: Western Digital 80 Gig
I started experiencing random reboots and critical errors in game applications on Sunday. The computer would randomly reboot at random intervals from Windows. In addition, while running games like Warcraft 3, Asheron's Call, or World of Warcraft I would receive frequent critical errors that certain sections of the memory could not either be read or written to.
I figured that there was some kind of problem with the memory, so I downloaded Memtest86 and ran it. The first stick of RAM was in DIMM#1 and the second stick in DIMM#2. This was the memory configuration during all the random reboots and critical errors.
Memtest86 came up with several failures during the 5th phase of the test. The same failures came up upon repeated testing in the same phase of the test. I decided to try to isolate the failure and see if one stick or the other was defective. I yanked out the second stick from DIMM#2 and left the first stick in DIMM#1. The first stick (which I'll refer to as the "good RAM stick") passed the memtest repeatedly. I then stuck the second RAM stick into DIMM#1 alone and the computer would not even POST.
I then moved the second RAM stick (which I'll refer to as the "bad RAM stick") over to DIMM#2 alone and managed to get it to POST. The bad stick failed the memtest with the exact same errors during the same phase of testing as the combined sticks had failed during the initial test. For the sake of completeness, I moved the bad stick over to DIMM#1 alone and finally managed to get it to POST. However, the bad stick passed the memtest repeatedly. Puzzled, I moved the bad stick over to DIMM#3 alone and tested it there, which it also passed repeatedly. I moved it back into DIMM#2 alone and it failed the test repeatedly again and again.
Intrigued, I then moved the good RAM stick into DIMM#2 alone, to try to see if perhaps there was some kind of motherboard error occurring. The good stick passed the memtest repeatedly in DIMM#2. I then moved the good stick into DIMM#3 alone and it passed the test repeatedly in that slot.
After checking the motherboard manual to make sure I could do it, I put the bad stick in DIMM#1 and the good stick in DIMM#3 and ran the memtest. The combined sticks passed the test where previously, while configured in DIMM#1 and DIMM#2, they had failed it. I moved the sticks back into DIMM#1 and DIMM#2 to test again. The combined sticks failed as they had during the initial test.
I then reconfigured the sticks to DIMM#1 and DIMM#3 again and booted up the system. Although I only had limited testing time last night, I seemed to be totally stable. The system did not reboot at all and I actually managed to play WoW for an hour without a single crash.
Any suggestions on what's occuring? I figured that maybe the mobo's memory seating in DIMM#2 was messed up, but I wanted to get some more guidance from others.

Well if it's an Antec Sl-350, that one only has 16A @ 12V, way too little to handle your system.....
I would get another PSU in any case, as even the TP-380 is bare minimum.....
Go for the Enermax 465 it has 33A @ 12V and then you are sure it's not a power problem...
Also, a good PSU is never a waiste of money

PROBLEM! K8T Neo-FSR cannot instal " wd 500 32MB Cache internal hard "

hi everybody
i have a K8T Neo-FSR mainboard and i bought a western digital hard ( 500 32MB Cache internal )
but
i cant instal that.
the mainboard is update.and this is information of pc :
Operating System
         MS Windows XP Professional 32-bit SP3
      CPU
         AMD Athlon 64 3000+   40 °C
         NewCastle 0.13um Technology
      RAM
         256MB Single-Channel DDR @ 200MHz (3-3-3-8)
      Motherboard
         MSI MS-6702 (Socket-754)
      Graphics
         L1520B @ 1024x768
         128MB GeForce FX 5200 (MSI)
      Hard Drives
         78GB Western Digital WDC WD80 0JD-00JNA0 SCSI Disk Device (SCSI)   43 °C
      Optical Drives
         WD Virtual CD 1110 USB Device
         SONY DVD RW DRU-820A
      Audio
         M-Audio Delta Audiophile
what shall i do?? please help me.

No, you put the jumper on the drive!
You must enable OPT1 (jumper pins 5-6).
However do be warned that your mainboard uses the Via VT8237 southbridge chipset, which has known unfixable issues with SATA 3.0gb/s. You may have luck with the drive jumpered to 1.5gb/s, but it may still not work.
See: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1337&p_created=1112379341
And elsewhere: http://www.google.co.uk/search?q=via+vt8237+sata2

K8T Neo-FSR SATA Limits?

I have an old PC with an AMD Athlon 64 2800+ processor and a K8T Neo-FSR with a VIA® VT8237 chipset. This board has two 1.5 Gb/s SATA connections so I decided to put these to use by turning this old PC into a file server (NAS). I bought some refurbished 250 GB drives for a RAID 1 setup from Newegg and plugged them in and the firmware did not detect them. I upgraded the BIOS to the latest version (1.9) and it still didn't detect the drives. It's my guess that there's a limit on how much that chipset can support. Does anyone know what it is? I've tried searching extensively for it, but can't find any info on any limitations as far as SATA.
For readers' simplicity, here's the URL for the info page: us.msi.com/product/mb/K8T_NeoFSR_FIS2R.html (copy and paste).
Please note that I have no interest in purchasing a new system as a replacement. I know this board is a decade old and well beyond its EOL, but it works and it is paid for, so please don't go there. Thanks!

Quote from: TV34 on 24-May-14, 00:01:27
@ XFM
from http://www.elektronik-kompendium.de/sites/com/1006201.htm
Schnittstelle Bandbreite Reichweite Geräteanzahl Einführung
Serial-ATA (SATA) 150 MByte/s 1 m 4 2003
Serial-ATA-II (SATA 2 / SATA-300) 300 MByte/s 1 m 16 2005
Serial-ATA-III (SATA 6G / SATA-600) 600 MByte/s 1 m 16 2007
mfg Tino
Got news for you, that's a typo there. * Should read 3 G. You apparently still don't understand the proper terminology.
Yes that's correct, SATA does not use jumpers for Master, Slave or Cable Select like PATA drives do.

K8T NEO FSR bad bios or bad CPU?

Hi - I just got a K8T NEO-FSR with an Athlon 64 3000 (newcastle) and 512 Meg of Corsair value select memory. I installed everything fine and tried to install a fresh copy of windows xp home but I kept getting a blue screen of death and a registry error (from the CD!!).
I then reformatted my drive and put a copy of windows 2000 pro on it. After updating the drivers, everything seemed to be OK. But - I was getting a few random problems (CD stopped working, freeze, etc). I was going to try to install XP but I thought I should probably upgrade the BIOS first just to make sure that wasn't the problem.
Well - I followed the instructions for updating the BIOS (I've done it before for other systems) and everything seemed to go smoothly until I tried to reboot. Nothing - it powers up but doesn't do anything. I assumed that something must be wrong with the BIOS. I double checked which file I was using A6702VMS.180.
I then tried a BIOS recovery. I reformatted a floppy on a windows XP machine and put a copy of the BIOS that I had backed up before the flash onto the disk named AMIBIOS.ROM. Then I unplugged the power supply and every piece of hardware except the CPU, reset the CMOS, and let it sit for 15 minutes. Then I reconnected the floppy and plugged in a PS2 keyboard into the back. Pushed down CTRL and HOME and turned the power on. Nothing. Tried it again with each CTRL key and with the regular HOME key and the keypad. Nothing.
The LED's on the back panel show all 4 red which the manual says is a bad CPU. Could my CPU have died somehow? Did I miss something obvious?
My power supply is an Enermax 350W with 32A on 3.3V, 32A on 5V, and 17A on 12V.
Any thoughts? I'm a little annoyed that I can't find a definitive source for how many amps on each of the rails the main board and CPU need. I've found widely varying advice on all of the boards I've read.
Thanks,
Ted

Quote
1) The PSU that you have is quite weak on the +12v Rail & could be the cause of your problems, most people on here recommend 20a on the +12v Rail.
I've seen people on various boards throw numbers anywhere from 15A to 30A for the 12V rail. However, I haven't seen anyone quote any hard sources. My back of the envelope computations:
CPU: 89 W (max power from AMD's web site)
MEM: uses 3.3V
Floppy: uses 5V
CD: 20W
RAM: uses 3.3V
HD: 15W
Geforce2 GTS graphics card: 8W
which gives me about 132W on the 12V rail at maximum power usage (which - since I haven't done anything I doubt I've hit). This would be about 11 amps which is easily covered by my power supply. And - the 89W number form AMD is for all the Athlon64 chips of which the 3000 is the very low end so it's probably less than that.
Quote
2) You may have faulty RAM & i would recommend running a memory testing program just to check that is ok.
Could the RAM be faulty even though I had a windows 2000 setup running reasonably well? The BIOS did do a memory check on each startup (I turned that on when I first installed the board).
Quote
As for the system not booting now, sounds like you have a bad BIOS flash & that you will need to get the BIOS reflashed or RMA your motherboard.
I don't think this board supports reflashing - the chip is soldered onto the board. Any idea why the rescue procedure isn't working?

K8T NEO FSR floppy problem

I just got this board, here is my gear:
K8t NEO FSR
2 x512 MB Mushkin DDR
74 GB WD Raptor SATA HDD
200 GB Maxtor SATA HDD
Plextor 8x DVD+-RW
Athlon64 3000+
ATI Radeon 9800 Pro
X-Superalien case
The problem I am having is that the system will not successfully load anything from the floppy drive. I used a known good floppy drive. If I enable floppy seek at boot it spins up and the light comes on, but it can't boot from the floppy and Windows XP setup can't read the SATA drivers disk.
I can't install XP because I can't get the drivers for SATA to load. I have a network, is there any way I can have the sysem load the drivers over the network? HELP!

I had a problem similar to this on a case with a molded floppy slot. WHat it ended up being is that I screwed the floppy drive down too close to the case and the button was always slightly depressed. Enough that I could here it click when the disk slid in but the drive failed to work properly because the disk wasn't technically in. This drove me nuts because 3 drives failed to work all with same symptoms. Then I noticed when I hooked one up on the side of the case it worked fine.
Also be sure that your boot order in advanced settings is set for floppy first and then hard drive and that floppy is not disabled in your integrated peripherals section.

K8T Neo-FSR will not boot Windows XP

Hello,
I just finished swapping out my old Asus P4B266 motherboard for an MSI
K8T Neo-FSR. I plugged all my old components into the motherboard and
started it up. I can get into the BIOS and everything seems to be ok
as it detects all my drives (Seagate 120 GB IDE, Zip-100, Floppy 1.44,
Creative Labs DVD and Plextor DVD burner). However, after exiting the
BIOS, I get the screen that tells me to select how Windows XP should
start (safe mode, safe mode with command prompt, safe mode with
networking, or start normally). This is where my problem is. I
cannot get Windows XP to boot regardless of which option I choose. I
really do not want to have to reformat my drive. If anyone has a
solution or suggestions, it would be greatly appreciated. Thanks in
advance.
Current hardware:
K8T Neo-FSR
Athlon 64 2800+
512 MB Crucial PC3200 RAM (non-ECC, unbuffered) CAS=3
120 GB Seagate IDE Hard Drive
(trying to load) Windows XP with SP1

Hi
Not a lot without BIG risk of losing some data. If you have mega important files, you will of course have several backups, and backups of back ups.
So you could slip another HDD in a bay and plug the cable from your Sys HDD into it. Then install OS to it, and use it to check and repair your IMPORTANT HDD, after, of course, you have done ANOTHER BACKUP. you may be able to use disk management or device manager to fix MBR and boot files. As your offending HDD and the old C: partition, will will have a new Partition letter now, you can use XP CD repair facility of repair your previous installation. You will of course lose IE and OE info and settings, but not a lot else. But there again havng back up to Express Assist all your emails,OE settings and accounts along with all yout IE settings and data, will be restored at the touch of a couple of keys.
cheers
jocko

K8t-neo-fsr no initial boot

Just picked up all the parts today..msi k8t neo-fsr, amd64 3200cpu 450w power supply. 120gig sata drive, dvd burner.. turned it on and nothing. d-bracket shows up as 4 red led's. and the front power led just flashes..
please help.. I need to get this working this weekend...
Thanks,
Mike

well hang on there, 4 lights is proccessor error.
now carefully look at mobo 1st is heat sink doen all the way, you did take plastic off of heatsink, when you put the processor on the board you ligned up the triangles lifted release bar and processor slid right in all nice and easy...then locked bar down, and carfully placed heatsink on and locked it.
now the bad news if you have to take off the heat sink do it slowly,as usually it will rip the processor out ,sometimes damaging pins, and you will have to use artic silver or a new heat sink with a pad, you canot use old pads or goo..it has to be cleaned off. ther is a good article on that one.
@psu
i would say psu is limited on upgrades..at 18a but if you want to return your new one just say you got it for an hp, act kind of sumb ,and say that it takes a whole different plug and everything, that usually works...
btw what kind of memory do you have ..non ecc i hope.

K8T Neo-FSR problems booting

Hi
My Computer is having problems booting. Two days ago i went to boot my computer and all the fans started up and everything seemed fine, but then nothing happened at all, but my computer was still running (cpu fan is running, power suppy fan running, red light on tower has some activity at the begining but then nothing)(my monitor light is flashing like it does when the computer is off) , so I turned off the computer by the button. Then i rebooted the system and everything worked fine. Today I went to boot my computer and this happened again, but now it won't boot at all. I have had this motherboard since january and I have never had a problem before. Any ideas of what is going on? I am assuming that it is something with bios, but I have no clue what. Any help would be appreciative.
motherboard: K8T Neo-FSR
cpu: athlon 64 3200+

AMD64 3200+
K8T Neo-FSR
512 MB Ultra ULT30215, 512 MB BRAVO ADM328TM-50 400mhz
PNY GeForce MX4000 128MB AGP Video Card
Maxtor 60 GB(Don't know specific model)
Unknown 20GB HD
Philips CD-burner
Philips CD-ROM 56X
Creative speakers
IBM 17" screen E74
Powmax 300 watt dual fan ATX power supply
TRENDnet TRW-423PI wireless pci Adapter
I have already unplugged any devices that are not needed during startup, I still have the same exact result, I tried to update the BIOS but it didn't read the drive because i'm assuming it doesn't know the boot order because that all comes the BIOS, so this is was leads me to think its something with the BIOS and not my hardware. My computer has a boot manager, I beleive its OSN??? This sits on my Maxtor drive with windows xp and solaris10 sits on the other Hard drive. Is there any more information you need?

Slow Internet Connection Speeds caused by Ethernet Controller Driver

Problem: Internet connection speeds are 1/10 of available connection speed.
1. Problem statement is based on running speed tests at cnet, speedtest.net, and AT&T.
2. I am paying for 12 MBps down load speed but I only get about 1.5 MBps.
3. Other computers in household get 11+ MBps connected to the same ethernet cable and also different ethernet cables.
4. I traced the problem to the network controller driver.
5. I updated to the latest driver with no change in performance.
6. After some experimenting I found that if I re-install the driver after the computer is booted up, the internet connection down load speeds increase to 11+ MBpS (typically around 11.4 with maximum capability of 12)
I have assumed that the driver does not load properly the first time, but why? Or is there some other cause or setting that I have overlooked?
Board: MSI Z77A-G43
Bios: Version 2.0
Ethernet Controller: RealTek RTL8168B PCIe GBE Family Controller
Ethernet Controller Driver: 7.65.1025.2012
VGA: NVIDIA GeForce GTX 550 Ti
PSU: Raidmax RX630Z 630W
Intel Core i7-2700K Sandy Bridge 3.5GHz LGA 1155 95W
MEM: 4x4gb
HDD (Primary): Western Digital WD5000HHTZ-04N21V0 500MB
HDD (Secondary): Hitachi Deskstar HDS723020BLA642 2TB
OS: Windows 7 64bit Professional

Have you installed all of the most recent drivers:
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win7%2064
There is also an realtek firmware update included in the latest bios:
>>Beta BIOSes<<
2.8 is the latest official & there are two newer beta bios's there as well.

Satellite A100 Ethernet Controller driver

I can't find the ethernet controller driver and the PCI device in the list. I tried LAN driver (Intel Pro 10) and (Intel Pro 100) but they have no setup file, only uninstall files. Any idea?
Message was edited by: footplant

Do you see INF files? You may need to manually install the driver.
Go into Device Manager and select the LAN device. Update its driver and point it to the folder where the INF file resides.

K8T Neo FSR - Ethernet controller driver?

Similar Messages

Maybe you are looking for