K8T Neo FSR Won't Boot!

Hello!
My system doesn't boot . It power all of the fans and disk. The Power and Hard Disk leds stay lit (no blinking) the D-Bracket shows 3 red leds and one green led (green is on the lower left). I try without any disk units, no cards (just my graphic card which I test on my P4 machine and is OK) and just 1 stick of ram. The sytem was working "normally" except for some sporadics blue screens and reboots and the no NVRAM thing and that my RAM gets automatically reset to 200 (that's why I try the 1.92B BIOS ver) Last thing I remember was flashing the 1.92B Bios using the windows utility and after that kaput! What can I do? are there any procedures to fix this or did I kill my mobo?
Any tips suggestions will be really apreciated, many thanks in advance.
K8T NEO FSR
AMD Athlon 64 2800+
Markvision Value RAM DDR400 512 x 2
MSI GeForce4 Ti4200
Seagate Barracuda 80 GB
Old ACER CD-ROM 40x

Hi
The lower left led is inialising the Keyboard controller. ODD if nothing has been changed.
you can reset the comp by clearing the jbat1 jumper. Switch power off first, page 2-25 of manual. If that does not work make a rescue disk. place file AMIBOOT.ROM on floppy put floppy in drive, reboot and press ctrl + home.
But check the keyboard first.
cheers
jocko

Similar Messages

K8T Neo-FSR will not boot Windows XP

Hello,
I just finished swapping out my old Asus P4B266 motherboard for an MSI
K8T Neo-FSR. I plugged all my old components into the motherboard and
started it up. I can get into the BIOS and everything seems to be ok
as it detects all my drives (Seagate 120 GB IDE, Zip-100, Floppy 1.44,
Creative Labs DVD and Plextor DVD burner). However, after exiting the
BIOS, I get the screen that tells me to select how Windows XP should
start (safe mode, safe mode with command prompt, safe mode with
networking, or start normally). This is where my problem is. I
cannot get Windows XP to boot regardless of which option I choose. I
really do not want to have to reformat my drive. If anyone has a
solution or suggestions, it would be greatly appreciated. Thanks in
advance.
Current hardware:
K8T Neo-FSR
Athlon 64 2800+
512 MB Crucial PC3200 RAM (non-ECC, unbuffered) CAS=3
120 GB Seagate IDE Hard Drive
(trying to load) Windows XP with SP1

Hi
Not a lot without BIG risk of losing some data. If you have mega important files, you will of course have several backups, and backups of back ups.
So you could slip another HDD in a bay and plug the cable from your Sys HDD into it. Then install OS to it, and use it to check and repair your IMPORTANT HDD, after, of course, you have done ANOTHER BACKUP. you may be able to use disk management or device manager to fix MBR and boot files. As your offending HDD and the old C: partition, will will have a new Partition letter now, you can use XP CD repair facility of repair your previous installation. You will of course lose IE and OE info and settings, but not a lot else. But there again havng back up to Express Assist all your emails,OE settings and accounts along with all yout IE settings and data, will be restored at the touch of a couple of keys.
cheers
jocko

K8t-neo-fsr no initial boot

Just picked up all the parts today..msi k8t neo-fsr, amd64 3200cpu 450w power supply. 120gig sata drive, dvd burner.. turned it on and nothing. d-bracket shows up as 4 red led's. and the front power led just flashes..
please help.. I need to get this working this weekend...
Thanks,
Mike

well hang on there, 4 lights is proccessor error.
now carefully look at mobo 1st is heat sink doen all the way, you did take plastic off of heatsink, when you put the processor on the board you ligned up the triangles lifted release bar and processor slid right in all nice and easy...then locked bar down, and carfully placed heatsink on and locked it.
now the bad news if you have to take off the heat sink do it slowly,as usually it will rip the processor out ,sometimes damaging pins, and you will have to use artic silver or a new heat sink with a pad, you canot use old pads or goo..it has to be cleaned off. ther is a good article on that one.
@psu
i would say psu is limited on upgrades..at 18a but if you want to return your new one just say you got it for an hp, act kind of sumb ,and say that it takes a whole different plug and everything, that usually works...
btw what kind of memory do you have ..non ecc i hope.

K8N Neo FSR won't boot.

I've flashed mainboard BIOS using LiveUpdate from v1.6 to latest v1.9 for some reason (CPUID for Sempron 64bit, low DDR speed). Everything ok . Then XP became unstable (blue screens) and finally PC wont boot (one LED is green, nothing appears on the monitor) . Any idea, except to put it back to the reseller, what I probably have to?
Does anyone have the dg. LED description for this board (there's neither anything in my printed manual nor I've found this in the web)? The description was there for older mainboards, why is this not there now???

you did the big mistake if you used live update!!!
Bios flashing and live update:
look at this: https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
and this: https://forum-en.msi.com/index.php?topic=14909.0
and this https://forum-en.msi.com/index.php?topic=69.0
something abou Bios recovery:
https://forum-en.msi.com/index.php?topic=71165.0
https://forum-en.msi.com/index.php?topic=65951.0
btw look at this, it`s about bios version 1.9 for MS-7030, this bios has lots of bugs at K8N Neo-FSR:
look at this: https://forum-en.msi.com/index.php?topic=87562.0
and this: https://forum-en.msi.com/index.php?topic=86772.0
I suggest you to revert back to official version 1.7 (which is stable) or modded version 1.56 by pinochio...look at this: https://forum-en.msi.com/index.php?topic=59711.0 and also look at syar`s collection: http://homepages.nildram.co.uk/~chsmith/Syars_Bios_Collection/
go to NEO1 and download 7030MOD.156

Msi k8t neo fsr won't post

OK...I put the system in my sig together and turned on the machine. Went straight into the bios to tweak stuff like I wanted to. 1st off, my cd burner and my hdd were not detected. I made a mental note of that and kept on browsing through. I was at the screen that gives the current temperature (which was hovering from 34C-35C) and then outta no where the thing dies. Now, the power led on the front of the case flashes long slow flashes. I turned the psu off, then turned it on and tried to boot. I can hear a faint whine as the hdd led comes on, then it goes silent and the green power led starts flashing again. I disconnected my two case fans and front case leds (not the power and hdd leds) and tried it again thinking it was the psu. Same thing as before. I moved cmos jumper to clear for ten minutes and then moved it back. I tried to start it back up, the fan on the processor spun for about a second, heard the faint beep, then nothing w/ the power led doing the slow contunuous flashing thing. Anyone know what's going on?

I took the ram out, cleared CMOS for about 40 minutes, put CMOS jumper back, and then put the ram back. I turned the comp on and actually got some signal to the monitor b/c it temporarily turned on for about 3 seconds(though no picture came up), then it turned off and the flashing power led began. Sounds like the ram may indeed be the prime suspect. BTW, do any of you have a stick of ram I could borrow (lol)? I called two computer stores and asked if they could put a stick of ram they had laying around and see if it posted. One of them asked if I was going to buy their ram if it worked and I said no, b/c I would just RMA the ram I already bought. They said it would cost about $15. I called one more store and they said it would $45! WTC, I can buy my own stick at newegg for $24!
http://www.newegg.com/app/ViewProductDesc.asp?description=20-209-013&catalog=147&depa=0
Any final thoughts b4 I package this stuff up? I'm now contemplating sending the processor, ram, and mobo back.

K8T Neo-FSR problems booting

Hi
My Computer is having problems booting. Two days ago i went to boot my computer and all the fans started up and everything seemed fine, but then nothing happened at all, but my computer was still running (cpu fan is running, power suppy fan running, red light on tower has some activity at the begining but then nothing)(my monitor light is flashing like it does when the computer is off) , so I turned off the computer by the button. Then i rebooted the system and everything worked fine. Today I went to boot my computer and this happened again, but now it won't boot at all. I have had this motherboard since january and I have never had a problem before. Any ideas of what is going on? I am assuming that it is something with bios, but I have no clue what. Any help would be appreciative.
motherboard: K8T Neo-FSR
cpu: athlon 64 3200+

AMD64 3200+
K8T Neo-FSR
512 MB Ultra ULT30215, 512 MB BRAVO ADM328TM-50 400mhz
PNY GeForce MX4000 128MB AGP Video Card
Maxtor 60 GB(Don't know specific model)
Unknown 20GB HD
Philips CD-burner
Philips CD-ROM 56X
Creative speakers
IBM 17" screen E74
Powmax 300 watt dual fan ATX power supply
TRENDnet TRW-423PI wireless pci Adapter
I have already unplugged any devices that are not needed during startup, I still have the same exact result, I tried to update the BIOS but it didn't read the drive because i'm assuming it doesn't know the boot order because that all comes the BIOS, so this is was leads me to think its something with the BIOS and not my hardware. My computer has a boot manager, I beleive its OSN??? This sits on my Maxtor drive with windows xp and solaris10 sits on the other Hard drive. Is there any more information you need?

[Athlon64] MSI K8T Neo FSR / Early Chipset Initialization

Hi There,
My MSI K8N Neo Platinum has a broken LAN interface, i don't have the papers of it so I can't send it for RMA. So i bought a MSI K8T Neo FSR.
But there is a problem, when i power up the system, the fans are spinning, the hard disk spins up and the CDRW/DVDROM drives are working. The only thing the system does is hanging at the "Early Chipset Initialization" state accoding to the D-Bracket.
- Tried an other VGA Card > No result (Radeon 9200, Club3D)
- Bought other memory (I do have 1GB now , but still no result)
- Tried resetting the BIOS > No result
- Tried removing the RAM, the system beeps there's no RAM in the system, but when i put it back in the system wouldn't boot again.
- Tried to boot up only with R9200, CPU and RAM, and still it won't work.
- Tried to boot outside the case, but still no result.
I tried my processor, memory, PSU and vga card (6800LE) back in my K8N system and it works great, so i don't think my PSU is too weak.
And I aint thinking that my motherboard is broke, it still beeps without memory in it.
I am getting really confused, i'm out of money now so i can't buy some new stuff.
Anyone ideas?
Specs in signature. (PSU 18A @ 12V), sorry for my bad english.

Quote from: fafner on 03-May-05, 20:55:16
Why don't you get a PCI network card for the K8N system? No need to fuss around with a new mb just to get a LAN connection.
Don't want to use PCI-Cards
Quote
Have you tried removing the RAM and then doing a Bios reset? Sometimes things get sticky if the RAM is still in place during a Bios reset.
I would also unplug anything that is not entirely needed to boot so you can simplify the problem.
Another hint. As the RAM controller is inside the CPU the system will not do anything right without RAM. The CPU will imediately hang.
Just tried a BIOS reset without RAM in the system, the system won't boot. Only the CPU, VGA card and the memory is placed. Only the 4pin 12v and the 20 pin is connected.
It just won't work, maybe the board is dead?

K8T Neo FSR with Audigy 1 Problem

I just received a major upgrade, for me anyway, last night. ALL I was getting on boot was 4-RED LED lights on the D-Bracket2 connector. I was ready to RMA the WHOLE thing to Tiger Direct, when I decided in one last ditch effort to try again.....I pulled my Audigy, and wham, it booted normally. Now let me describe.
1. I KNOW it's not a power issue, as I had EVERYTHING but Sound and Video removed, and unplugged, including hard drives. The D-Bracket2 LED's were still all-red on boot.....system would not POST.
2. Pulled ALL hrdware from system, except Video and Audigy, same results.
3. Last try, pulled EVERYTHING, including Audigy, and it booted normally.
4. Re-connected everything, except Audigy, re-installed Windows XP SP2, no problems, system runs.
I tried EVERY PCI slot with the Audigy, ALL with the same results; system would not run with it in there. The card was good 15 minutes prior on the OLD Abit Board. (meaning it works.)
ANy ideas???
System Specs:
K8T Neo FSR MB
Athlon64 2800+ CPU
GeForce Ti 4200 128MB Video
512MB Mushkin Green Memory (1 DIMM)
Maxtor 160GB HD
WD 20GB HD
45X CD-ROM
24X CD/RW (Sony)
onboard NIC, Sound (Audigy problem made me resort to the onboard sound)

Suggestions:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1104458&CatId=1078
The above might be only 420W but it has 18 amps under 12+, which is fine for your setup.
http://www.newegg.com/app/ViewProductDesc.asp?description=17-148-002&depa=1
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=719596&CatId=1079
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=719582&CatId=1078
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1120272&CatId=1078

MOVED: K8T Neo-FSR BIOS didn't know sampron64

This topic has been moved to AMD64 VIA/AMD/ATI based board.
K8T Neo-FSR BIOS didn't know sampron64

Blue screens have nothing to do with the Bios update. Those are trypically symptopmatic of other issues like low amps on the 12v rail for the devices you use or memopry issues and that like. Start by testing memory with memtest86+ as it is one of the likelyest suspects. Also post how many amps are on the 12v rail base on the lable on the PSU.
As for contacting MSI directly about when a Bios update is coming won'y get an answer but you are welcomed to contact them at support.msi.com.tw if you like.

K8T800 K8T NEO-FSR Memory Problems

Just a warning before I start in, this is a pretty long post. I'm going to try to include all the information I can.
Here's my system right now. It's running Windows XP Professional with all the latest updates.
Processor: AMD Athlon 64 3000, 512KB L2 Cache 64-bit Processor. Not overclocked at all.
Motherboard: MSI K8T800 K8T NEO-FSR, latest BIOS updates from MSI
Video Card: ATI RADEON 9800PRO Video Card, 128MB DDR, latest Catalyst drivers from ATI installed. Not overclocked at all.
Memory: Mushkin 184 Pin 2x512MB DDR400 PC-3200, running at DDR400 with Auto selected for all the memory timings in the BIOS. Memory placed in DIMM#1 and DIMM#2. Not overclocked at all.
Hard Drive: Western Digital 80 Gig
I started experiencing random reboots and critical errors in game applications on Sunday. The computer would randomly reboot at random intervals from Windows. In addition, while running games like Warcraft 3, Asheron's Call, or World of Warcraft I would receive frequent critical errors that certain sections of the memory could not either be read or written to.
I figured that there was some kind of problem with the memory, so I downloaded Memtest86 and ran it. The first stick of RAM was in DIMM#1 and the second stick in DIMM#2. This was the memory configuration during all the random reboots and critical errors.
Memtest86 came up with several failures during the 5th phase of the test. The same failures came up upon repeated testing in the same phase of the test. I decided to try to isolate the failure and see if one stick or the other was defective. I yanked out the second stick from DIMM#2 and left the first stick in DIMM#1. The first stick (which I'll refer to as the "good RAM stick") passed the memtest repeatedly. I then stuck the second RAM stick into DIMM#1 alone and the computer would not even POST.
I then moved the second RAM stick (which I'll refer to as the "bad RAM stick") over to DIMM#2 alone and managed to get it to POST. The bad stick failed the memtest with the exact same errors during the same phase of testing as the combined sticks had failed during the initial test. For the sake of completeness, I moved the bad stick over to DIMM#1 alone and finally managed to get it to POST. However, the bad stick passed the memtest repeatedly. Puzzled, I moved the bad stick over to DIMM#3 alone and tested it there, which it also passed repeatedly. I moved it back into DIMM#2 alone and it failed the test repeatedly again and again.
Intrigued, I then moved the good RAM stick into DIMM#2 alone, to try to see if perhaps there was some kind of motherboard error occurring. The good stick passed the memtest repeatedly in DIMM#2. I then moved the good stick into DIMM#3 alone and it passed the test repeatedly in that slot.
After checking the motherboard manual to make sure I could do it, I put the bad stick in DIMM#1 and the good stick in DIMM#3 and ran the memtest. The combined sticks passed the test where previously, while configured in DIMM#1 and DIMM#2, they had failed it. I moved the sticks back into DIMM#1 and DIMM#2 to test again. The combined sticks failed as they had during the initial test.
I then reconfigured the sticks to DIMM#1 and DIMM#3 again and booted up the system. Although I only had limited testing time last night, I seemed to be totally stable. The system did not reboot at all and I actually managed to play WoW for an hour without a single crash.
Any suggestions on what's occuring? I figured that maybe the mobo's memory seating in DIMM#2 was messed up, but I wanted to get some more guidance from others.

Well if it's an Antec Sl-350, that one only has 16A @ 12V, way too little to handle your system.....
I would get another PSU in any case, as even the TP-380 is bare minimum.....
Go for the Enermax 465 it has 33A @ 12V and then you are sure it's not a power problem...
Also, a good PSU is never a waiste of money

MSI K8T NEO-FSR, reporting CPU @ 50c~ at bootup?

Hello, I just replaced my Asus K8V SE Deluxe with a K8T Neo-FSR because of some RAM issues with the Asus, RAM is sorted out fine now with the K8T, at first with the Asus, I was using the stock HSF with the stock thermal compound on it, when I transferred it over to the K8T, I put some Arctic Silver 5, when I booted up, it was reading the CPU (Idle) at around 50c, when before with the Asus I was getting around 36c readings, why is this? I reapplied the arctic silver 5 thinking that was the issue, but it is still the same..anyone know if this is a bug or what? I touch the heatsink, and it's not even WARM..
Btw, my CPU is a Athlon 64 3000+

Quote
Originally posted by thegrommit
Quote
Originally posted by jeri534
Yea, on MBM5, it's still around 45c on Idle, I guess the sensors are just off, right? Or should I get a replacement?
Depends on the ambient temperature, but that's what I typically get.
weird..how bout on load?
and btw, did you post at tournament.com before?

MSI K8T Neo-FIS2R won't power-up

My MSI K8T Neo-FIS2R won't power up when I switch it on. All that happens is the fans "jolt" a few millimeters and that's it
Using an X-Pro 460w which does work as I have tested it on this PC
Any help would be greatly appreciated

I think I have found out the problem
Using my old Enermax (350) I was able to boot up the AMD 64 2800 every time but the PSU made this weird electrical sound - I think because it was being overloaded (I think as it doesn't make this sound when used with my XP 1800). I then reverted back to my new X-Pro (460w) and after a few attempts I managed to get the ram module and CPU powered... slowly adding more fans it became harder to boot and eventually the GPU fan wouldn't run once I plugged another fan in... I'm guessing this is because my PSU is too weak to power the juice guzzling AMD
I'll need to break the bank once again I suppose

K8T Neo FSR DOA

I am helping a new builder with an upgrade from a working system. We installed a K8T Neo FSR and AMD 2800 Retail in an existing,working system system. The current specs are:
WIndows XP Home (all patches)
MSI K8T Neo FSR MB
AMD 64 2800 Retail CPU
1024 Meg Super Talent PC 3200 memory (512x2)
80 M WD HD
Liteon CR-RW/DVD reader
HEC 525 PA ( 3.3V-35A, 12V-18A,5V-14A,)
Nvidiia 5700LE video
Since installing the upgrade the system will not initialize. Sometimes the fans (case and CPU) spin for about 1 second and then shut down and at other times nothing happens at all. I have read the posts about JBAT1 and found it to be apparently misconfigured (two pins nearest the DIMM were connected). When reconfigured (pins farthest from DIMMS connected) nothing at all happens at boot up. I have limited experience with 754 MBs but lengthy experience with K7 on various platforms.
Questions:
The diiagnostic LEDs on the D-Bracket do not light, what does this imply?
Although I have had good previous experience with HEC PS, is it likely that it does not have sufficient 12V current to start the board? Does this board/CPU combo reallly need 20A plus of 12V to initialize as some posts seem to indicate?
Does the lack of diagnostic readout imply failure of either the MB or CPU? If yes, how do I identify which?
I have tried all the usual stuff (running with only one memory stick in slot 1, reseating CPU/looking for bent pins, memory and video reseating and checking all connections). The board appears properly installed on stanchions. How to troubleshoot a shorted MB?
I have another PS (an Antec True Power 430) but haven't tried it yet. Is there a FAQ to help troubleshoot a situation like this? ( yes I have browsed the forum but maybe am not bright enough to find the right section)
All ideas are welcomed.
Joe

I am getting nowhere with this fast. As per the previous suggestion I insulated the board from the standoffs with cardboard and retried again. Same thing, fans spin for perhaps one second and then nothing. The D-Bracket never lights. I then pulled an Antec Tru-Power 430 from another working system and tried again, same thing. I think this motherboard has failed. Before I request an RMA anything that I might have missed?
System spec (not the same as my signature which is another MSI machine)
AMD 2800 754 CPU and retail HSF
MSI K8T Neo FSR MB
2x512 Super Talent PC 3200 memory
HEC 475 PS (3.3V 35A, 5V 41A 12V 18A)
WD 80G HD
Nvidia 5700 LE graphics
Liteon CD/RW-DVD
lots of case fans
This board was purchased by the young builder from Newegg who I gather no longer supports RMAs on motherboards. Any comments on RMA service through MSI? I found the link on the website but haven't helped him complet it yet.
Thanks,
Joe

K8T NEO FSR bad bios or bad CPU?

Hi - I just got a K8T NEO-FSR with an Athlon 64 3000 (newcastle) and 512 Meg of Corsair value select memory. I installed everything fine and tried to install a fresh copy of windows xp home but I kept getting a blue screen of death and a registry error (from the CD!!).
I then reformatted my drive and put a copy of windows 2000 pro on it. After updating the drivers, everything seemed to be OK. But - I was getting a few random problems (CD stopped working, freeze, etc). I was going to try to install XP but I thought I should probably upgrade the BIOS first just to make sure that wasn't the problem.
Well - I followed the instructions for updating the BIOS (I've done it before for other systems) and everything seemed to go smoothly until I tried to reboot. Nothing - it powers up but doesn't do anything. I assumed that something must be wrong with the BIOS. I double checked which file I was using A6702VMS.180.
I then tried a BIOS recovery. I reformatted a floppy on a windows XP machine and put a copy of the BIOS that I had backed up before the flash onto the disk named AMIBIOS.ROM. Then I unplugged the power supply and every piece of hardware except the CPU, reset the CMOS, and let it sit for 15 minutes. Then I reconnected the floppy and plugged in a PS2 keyboard into the back. Pushed down CTRL and HOME and turned the power on. Nothing. Tried it again with each CTRL key and with the regular HOME key and the keypad. Nothing.
The LED's on the back panel show all 4 red which the manual says is a bad CPU. Could my CPU have died somehow? Did I miss something obvious?
My power supply is an Enermax 350W with 32A on 3.3V, 32A on 5V, and 17A on 12V.
Any thoughts? I'm a little annoyed that I can't find a definitive source for how many amps on each of the rails the main board and CPU need. I've found widely varying advice on all of the boards I've read.
Thanks,
Ted

Quote
1) The PSU that you have is quite weak on the +12v Rail & could be the cause of your problems, most people on here recommend 20a on the +12v Rail.
I've seen people on various boards throw numbers anywhere from 15A to 30A for the 12V rail. However, I haven't seen anyone quote any hard sources. My back of the envelope computations:
CPU: 89 W (max power from AMD's web site)
MEM: uses 3.3V
Floppy: uses 5V
CD: 20W
RAM: uses 3.3V
HD: 15W
Geforce2 GTS graphics card: 8W
which gives me about 132W on the 12V rail at maximum power usage (which - since I haven't done anything I doubt I've hit). This would be about 11 amps which is easily covered by my power supply. And - the 89W number form AMD is for all the Athlon64 chips of which the 3000 is the very low end so it's probably less than that.
Quote
2) You may have faulty RAM & i would recommend running a memory testing program just to check that is ok.
Could the RAM be faulty even though I had a windows 2000 setup running reasonably well? The BIOS did do a memory check on each startup (I turned that on when I first installed the board).
Quote
As for the system not booting now, sounds like you have a bad BIOS flash & that you will need to get the BIOS reflashed or RMA your motherboard.
I don't think this board supports reflashing - the chip is soldered onto the board. Any idea why the rescue procedure isn't working?

K8T NEO FSR floppy problem

I just got this board, here is my gear:
K8t NEO FSR
2 x512 MB Mushkin DDR
74 GB WD Raptor SATA HDD
200 GB Maxtor SATA HDD
Plextor 8x DVD+-RW
Athlon64 3000+
ATI Radeon 9800 Pro
X-Superalien case
The problem I am having is that the system will not successfully load anything from the floppy drive. I used a known good floppy drive. If I enable floppy seek at boot it spins up and the light comes on, but it can't boot from the floppy and Windows XP setup can't read the SATA drivers disk.
I can't install XP because I can't get the drivers for SATA to load. I have a network, is there any way I can have the sysem load the drivers over the network? HELP!

I had a problem similar to this on a case with a molded floppy slot. WHat it ended up being is that I screwed the floppy drive down too close to the case and the button was always slightly depressed. Enough that I could here it click when the disk slid in but the drive failed to work properly because the disk wasn't technically in. This drove me nuts because 3 drives failed to work all with same symptoms. Then I noticed when I hooked one up on the side of the case it worked fine.
Also be sure that your boot order in advanced settings is set for floppy first and then hard drive and that floppy is not disabled in your integrated peripherals section.

K8T Neo FSR Won't Boot!

Similar Messages

Maybe you are looking for