K8t neo mobo not booting when any usb devices plugged in!

as stated above, my pc now will not boot with any usb devices plugged in at all
once they are disconnected, its all fine, will boot right thru to windows, where I can just plug em back in
it didnt used to do this, just started one day, didnt change anything etc
I;ve tried a format/reinstall of windows just in case it was that, but no!
anyone got any ideas??

If you are having problems with USB ports, read this topic.

Similar Messages

MBP will not boot up with USB devices connected

I have a late 2010 MBP 15 10.7.2 that will no longer boot up if any USB devices are attached. A dongle, a hub, anything. It goes to the gray screen and stays there. Disconnecting all USB devices the MBP will boot up. Then connecting the USB devices they work. It just will not boot up with anything connected to the USB ports. I have reset PRAM, SMC and fixed disk permissions. Made sure login items are ok, and start up disk is correct. I cant really say when the problem started as it worked fine before, maybe on 10.7.1? Not sure.
Any suggestions for a fix?

I re-installed the 10.7.2 combo. It booted up with a non powered usb 4 port hub but it disabled it. Plugging it out then in again and it works. Looks like the USB firmware has changed somehow in 10.7.2, The hub works on PC's at work no problem, and it worked on the MBP without issue previously. Its not just the non powered hub its a powered hub, and other devices.
Any solutions?

MBP will not boot when a USB/USB2 Device is plugged into either USB port.

MBP hangs on the initial Gray Screen when anything is plugged into either of my MBP's USB ports on boot and reboot. I've tried it with a USB mouse, USB2 Hard Drive, USB Memory Stick and USB RF Mouse. It DOES NOT happen when anything is plugged into the Firewire 800 port, only either USB port.
It happens on reboot and a fresh start whenever something is plugged into either of these two USB ports. I've let the gray screen sit overnight, just to see if it would enter the Login Panel. Didn't happen.
As soon as I unplug the USB item, the HD whirls up and a few seconds later the booting continues as normal. I have booted in verbose mode just to see what the system says. It stays on the gray screen, again, until I unplug the USB device. However, the screen does note the following:
"The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of hub @ location: 0x6000000)."
The above error may or may not be related.
........AND BEFORE ANYONE SUGGESTS IT, YES I HAVE ZAPPED THE PRAM and reinstalled the OS from new MBP Install Disks from scratch! Still occurs.
Hope someone can also validate what I've wrote with the newer MBP, as well.
Many Thanks!

JKosh wrote:
MBP hangs on the initial Gray Screen when anything is plugged into either of my MBP's USB ports on boot and reboot. I've tried it with a USB mouse, USB2 Hard Drive, USB Memory Stick and USB RF Mouse. It DOES NOT happen when anything is plugged into the Firewire 800 port, only either USB port.
It happens on reboot and a fresh start whenever something is plugged into either of these two USB ports. I've let the gray screen sit overnight, just to see if it would enter the Login Panel. Didn't happen.
As soon as I unplug the USB item, the HD whirls up and a few seconds later the booting continues as normal. I have booted in verbose mode just to see what the system says. It stays on the gray screen, again, until I unplug the USB device. However, the screen does note the following:
I'm having exactly the same problem with my MacBook Pro.
It's either the usb hub or simply the iphone... every time I need to boot my macbook pro I have to disconnect every device. It's getting quite annoying.
The previous 17" Powerbook G4 had no issues.

K8t Neo-fis2r - not booting!!!

Hello Motherboard gurus! Any help would be appreciated...
Here are my system specs:
AMD Athlon 64 3000+
Motherboard /AMD Socket 754 CPU’/ "K8T NEO-FIS2R"
RAM - Kingston 184 Pin 512MB DDR PC-3200 X2
Hard Drive – 120GB – Maxtor 120GB 6Y120PO
TEAC 1.44MB 3.5 Black Floppy Disk Drive
ThermalTake Silent PurPower 360WATX Power Supply
Lite-on DVDR – Model LDW/811S/851s BLK
ATI AIW RADEON 9600 Video Card, 128MB DDR, 128-bit, CATV/Video Out/Video In, 8X AGP, Model "ALL-IN-WONDER 9600"
Everything was working just fine until I switched out my CPU fan for a super quiet Zalman fan. I hit the power and nothing, but the fan spins up just fine. No video. The LED's on the back cycle through a couple of settings and sit at all green except for the upper left at red. I am at a loss ...perhaps the video card? I tried replacing the original fan and got the same result
Thanks in advance for any help,
JD

Your power is weak for sure. However you may also be seeing a fan that runs to slow for the motherboard to read. If the speed drops below what the MB expects it will cause issues as it thinks the CPU fan is dead and may not want to operate at all. Check that by reinstalling your old fan. Also on the power issue what is the 12v rail amps on that PSU?

[845 Series] MSI 845gv-m3 Mobo not booting when ATI RADEON 9550 G/Card inserted

Hi All
I have a problem with a new graphics card that I have installed. I had the Radeon 7000 Series 64MB Card. PC worked fine with this card...now I want to upgrade to 9550 256MB AGP 8X Card but pc does not boot. It is as if there is no graphics card installed.
Does anyone know of a sollution to this problem. I would really appreciate the help.
Thanks and hope there will be someone that can help

No external power....i think i have found the problem. I was chatting to some ppl online and found that the board does not support it.
I'm looking further into how I can overcome the problem of compatibility. I tried flashing bios but even the new bios does not make a diff.
The board is 845GV-M3 which is not found on MSI site, but is on ECS's web site.
That is where I got the info on supported cards. The ATI Radeon 9500 is supported though, which makes me think the 9550 should also be supported. But I know very little about 3D cards.
Thanks for the reply

1 day old MBP, MASSIVE cpu usage when any USB device is plugged in?!?

I just purchased a brand new MBP 2.2
If I plug anything into any of the usb ports my CPU starts clocking and within 10 minutes my system is running it's fans at full speed trying to keep it cool. This can be with no activity AT ALL. I can simply plug a USB thumb drive in and watch as the system gets hotter and hotter!
Has anyone heard of this and is there a solution. I had planned on booting and external USB drive to run a separate OSX install but this makes that impossible. Any help is greatly appreciated.
Kalel

Sorry, it was just taking FOREVER to index my USB drives. One drive is only 120GB and after almost 6 hours it still has 4 hours remaining! For reference it indexed my Firewire drive in about 15 minutes.

K8T Neo will not boot - Help!

I purchased an AMD64/MSI bundle that refuses to work. I did return the bundle to Komplett but they say it checked out 100% and returned it. Reading threads I can see certain PSU's or RAM could cause problems.
I have detailed the kit below but when I assemble the complete kit and power it on, I hear the HD spin but that’s it. The monitor stays in standby. The 4 lights on MSI “D-Link” are all red & the lights on my keyboard keep flashing. I also tried just connecting absolute minimum items as per FAQ to see if that nailed the problem but is the same result every time. The PSU is a fairly decent Enermax model. The RAM came part of the bundle and works in other machines (anyway Komplett checked it out). The only thing I can think of is that the OS is on a 120GB IDE HD and I also have a 250GB SATA backup drive. This is the 3rd system I have built. Can anyone point me where I could be going wrong as it seems a waste of money with this great bit of kit just sitting in a cardboard box!
KIT:
(forgot PSU) Enermax EG651P 650Watt
AMD 64 3200 Socket 754
MSI K8T Nero-FSR (754K8T800, SATA/ATA, GbLAN)
RAM Crosair Value PC3200 512 (plus 2 more sticks of 256MB)
Maxor ATA 120GB
Maxor SATA 250GB
ATI 9700pro
Sound Blaster Audigy 2
Liteon CDRW
Liteon DVD/RW

Quote
This is the 3rd system I have built.
...don't let this shake your confidence...it was a curve ball, you swung and missed...no big deal...
...I do the same thing...

HP ProDesk 490 G1 MT does not boot when external "WD - My Book - 4 TB - USB 3.0" is connected

I'm troubleshooting an HP ProDesk 490 G1 MT.
Intel Core i7 - 4770 CPU @ 3.40 GHz GHz
16.0 GB RAM
Windows 7 Professional Service Pack 1 - 64 bit
HDD 1 GB
HP doe's not boot if any external hard disk drive is connected. All dimensions and all brands, USB 2.0 or USB 3.0
PC don't boot even if I command from BIOS to boot via internal hard drive.
It try, I see Windows is loading, but then i see the PC is searcing a boot system, a MAC address and then it is lost and alone until I disconnect the external hard-drive ...

The fact is that I have four Acer (2 desktop, 1 nettop, 1 Netbook) and 1Notebook HP (2006/2007) that not have this issue.
When I connected the first time this morning the external hd, my mouse Logitech M570, trackball - wireless, went crazy. I searched and found a solution on Logitech Website.
More:
I wrote:
... " ... All dimensions and all brands, USB 2.0 or USB 3.0 ... " ...
But is too long on Verbatim, Toshiba, WD, Samsung, Freecom, Lacie, sites.
But "Never say never again", I tried and the site WD is unavailable.
On the other hand is a common issue on HPs, I can see on this site.
I'll try the solution at:
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Pc-hangs-at-hp-boot-screen-with-external-...
of "jako 1x4". It didn't work for "MrWoogy", but I have a USB 3.0 hd.
Tank you for your doctrine and wise advise.

IMac will not boot from any mode except Target Disk

I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
         com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
         com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
            dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
com.apple.driver.AppleHDA          2.3.0f2
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          8.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AirPortBrcm43224          600.36.17
com.apple.iokit.AppleYukon2          3.2.3b1
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBUHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

210-4125 will not boot when windows 7 x64 is installed

i have posted this problem a while ago "210-4125 will not boot when windows 7 x64 is installed"
hoping that some one new might have had the same problem
HP.......................................HP MINI PC 210-4125
model ................................210-4125
Bios ...................................F08
ser no................................ [edited Serial Number by Moderator]
product no.........................A8V56EA#ABU
Ram ..................................4.0 GB
system board ID............... 338d
processor .........................Atom(TM) CPU N2800 1.86GHz
Product configuration ID..0797200000204600000300100
acording to INTEL the cpu is X64 bit, but the bios will not let a X64 boot up only a x32 bit ?
and i get a message on black screen "you are trying to load an opperating system not compatable" or some thing like that
it would seem that the bios is the problem and not the CPU ? the 08 bios update only covers x32 bit and not x64
if any one out there is running x64 bit windows 7 on the 210-400 range of netbook can you tel me
1. model no
2.CPU
3.Ram installed
4 bios No
thank you
JB

thank you George
i will bear that in mind next time
i see that you work for HP ? do you have any suggestion's for my problem ?
as i mentioned before the notebook works faultlessly when X64 windows 7 is installed via the OEM disk in the external DVD drive , but if i disconnect the DVD drive it will not boot, but gets stuck in boot loop , then if i connect the drive with any windows installation disc loaded in it , it loads perfect and works perfect even if i disconnect when loaded , but i can not keep the drive connected ?
i have tried to use a USB flash drive to install X64 windows 7 but it comes back that the present CPU is not compatible ??
when it clearly states on Intel web site that it is and it works perfect when loaded ?? even the Windows update manager confirms that it will run all X64 windows OS
i understand the the bios "InsydeH20" is a very difficult bios to work with, and that Insyde have blocked the "hidden menu" via software ? i have exhausted all the software functions to open the complete bios that i can find at the moment , i think it is locked out from out side the bios and not from inside.?
any pointers in the right direction would be very helpful ,
many thanks
John

G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD

We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
We were in the process of installing 10.4 Tiger before placing it for sale.
The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
We have done the following during our troubleshooting:
- Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
- Remove RAM 1 stick at a time and reboot
- Replace RAM with RAM from another working Quicksilver
- Replace Video Card with one from another working Quicksilver
- Zap PRAM
- Reset CUDA switch
- Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
- Tried booting from the Macintosh Server G4 Software Restore CD
- Tried booting from Mac OS X Server CD
- Tried booting from AppleCare Protection Plan CD with TechTool
- Tried booting from Diskwarrior CD
- Tried booting from an external FireWire drive with a disk image of Tiger OS Install
- Tried booting with the hard drive disconnected
The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.

Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
I would look at the CD drive cables, etc, and see if another drive gives different results.
You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
HT1310- Startup Manager: How to select a startup volume

Notebook HP Probook 6560b not booting when my book essential is plugged in.

Dear sirs,
My laptop will not boot when the my book essential is plugged in.
The facts
MY book essential 3.0 TB
HP Probook 6560B
My book works well, is installed in windows and works perfect.
Drivers are up to date.
However when i want to boot my pc the system freezes.Doesnt do anything not even the bios menu.
When i unplug the my book it resumes the boot.
I did the following things to solve the problems.
Changed bios boot order in to primary hardisk first.
Disabled booting for USB.
USB legacy option is diabled in bios menu.
I have contacted Western Digital but they say i have to change something in windows but don't know what exact.
I am really out of options and do no what to do, can you please help.
Yours sincereley,
Gerben Tierie

Hello Gerben,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Window will not boot on the usb cd rom what should be done

window will not boot on the usb cd rom what should be done

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

1st-gen Mac Pro does not boot in any way, not even in safe mode

I have a 1st-generation Mac Pro with the graphics card upgraded to NVIDIA GeForce 8800 GT; running 10.7.2. I have had no problems with the machine since I bought it in May 2007... until now. Specifically, the machine suddenly became non-responsive, froze (I do not remember this ever happening before), so I had to power it down and restart. After that, the machine does not boot in any way: does not start up with the Option key; no FireWire target mode; does not start up even in the safe mode. All I get when I power the machine up is the folllowing endless loop: (1) the display unit (30" Apple Cinema Display) waking up from sleep (white light going off) and (2) a flicker of white on the display while the optical drive sounds like checking for any inserted media... then again the display going to sleep for a few seconds and steps (1) and (2).
I could really use help here. Thank you in advance.

Linc:
I am also sure it is a hardware fault. I have tried to run the Apple Hardware Test from the orginal system disc: I opened the optical drive tray with a paper clip, inserted the disc and powered up the machine. However the machine only spinned up the disc, turned the display to standby, spinned up and standby, etc.
What kind of hardware fault could it be?
(1) the display unit (30" Apple CInema Display) -- I presume unlikely, since the computer should boot even with a defunct display unit or no display unit at all, for that matter;
(2) the graphics card
or
(3) the logic board?

W530 winn not boot from any source other than shipped HD

Hello,
We have recently purchased a number of the new W530 machines. They shipped with Windows 8, but our organization uses Windows 7.
When trying to boot to our WDS, the machines see the WDS, but will hang when installing the WIM files.
When booting from a Windows 7 DVD or USB install disk, it hangs at the Windows splash screen.
It doesn't matter if we use the HD that shipped with the machine or a different one, the same thing happens. We simply cannot get the machines to boot from any other device other than the HD it shipped with.
Any ideas would be appreciated. I can't imagine that these machines aren't capable of runnning Windows 7.

Sorry you are having trouble.
Go into the BIOS by pressing F1 when you see the ThinkPad logo.
Under the security heading scroll to the last item called secure boot and disable that feature.
Brad

K8t neo mobo not booting when any usb devices plugged in!

Similar Messages

Maybe you are looking for