K8T NEO2 BIOS 9.4 CPU support question

hi i whas wondering if i upgraded to the newest bios version 9.4 if it would still support my athlon 64 3000+ winchester core?.i need to flash to a newer bios in a attempt to fix the dual channel support on the mb.i currently have bios 3.30.could i also switch to a older version for the dual channel to work?.

hi glitch; i had the same dual channel problem...i also have the same board (the k8t neo2) and it is a winchester.  you are not supposed to flash to bios 9.4 with a winchester.  make 100% sure that you actually do have version 3.3 bios...because that is what fixed the dual channel problem for me.  I thought I had bios 3.3 because that's what my startup screen said...but the 3.3 was actually something completely different...wasn't even the bios version.  It took me forever to realize I actually had version 3.0.  Once I updated to version 3.3 the dual channel worked great!

Similar Messages

  • GX700 bios 1.22 cpu support???

    Does anyone have a full list of GX700 bios 1.22 CPU-support?
    I have asked msi support directly, but they do not want to give me direct answer.
    Just wondering whether I can bring my gx700 closer to modern laptops with a cpu upgrade (most likely X7900 or T9500, if they are supported)

    Quote from: Svet on 16-February-12, 18:08:03
    since msi support can't answer dunno then..
    here is some QVL related to memory on GX700:
    " Yes, GX700 supports 4GB memory max, but not all the memory can be used on it, please refer to the Approved Memory Vendor list as below：
     Vendor--Model Name--Type, Frequency--Size--Chipset
    KINGSTON--KVR667D2S5--DDRII 667--2GB--MICRON
    Transcend--JM467Q643A-6-DDRII 667--512MB--RJETRAM
    Transcend--TS128MSQ64V6J--DDRII 667--1GB--SAMSUNG
    Transcend--TS128MSQ64V6J--DDRII 667--1GB--HYNIX
    Transcend--TS256MSQ64V6U--DDRII 667--2GB--MICRON
    Transcend--TS256MSQ64V6U--DDRII 667--2GB--SAMSUNG
    TWINMOS--8D-23KN5MHBTP--DDRII 667--1GB--HYNIX
    UNIFOSA--GU331G0AJEPN6E20--DDRII 667--1GB--ELPIDA
    WALTON--AS51082-667P015--DDRII 667--512MB--ELPIDA
    WALTON--AS1G082-667P015--DDRII 667--1GB--ELPIDA
    Transcend--TS256MSQ64V6U + TS128MSQ64V6J--DDRII 667--3GB--MICRON + RJETRAM "
    About CPU support found this:
    http://www.avadirect.com/msi-configurator.asp?PRID=10877
    GX700:
    Support Intel® Penryn FSB800 CPU T8100/T8300/T9300/T9500
    Support Intel® Merom FSB800 CPU T7100/7300/7500/7700
    Thank you
    I have tried several memory types and all of them have worked so far.
    I think that I found that Avadirect too, and it suggests that T9500 will work with MSI bios.. I am just not sure whether I can trust that source. Maybe I will buy a cheap T9500 from ebay if I happen to find one.
    Official information from Intel states that:
    PM965 Chipset supports also X7800/X7900/X9000, but I guess that BIOS is the restricting factor in this case.

  • K8T Neo2 BIOS flash stops TV card from working

    HI
    I've just flashed the BIOS on my K8T Neo2 (6702E) from 3.2 to 9.3 and swapped the processor fron a 3200+ Winchester to a 4200+ X2.  This all went fine and on boot up Windows detected the new chip and installed the multicore HAL.  The computer also redetcted all the other hardware such as graphics sound card ect without problem.  However I also have a Nebula Electronics PCI Digiatal TV card.  When this reinstalled its drivers the computer crashed and rebooted.  All subsequent attempt to reinstall this card result in the same behaviour. I've tried differnt PCI slot and even a complete fresh reinstall of windows but no change, the moment the drivers finish installing it crash's.  Nebula's support told me that there is a recognised incompatibility between there PCI card and the K8T Neo2 in fact they say "the MSI KT8 Neo series will not allow the installation of any Fusion based 878a-based drivers (as used by our DigiTV PCI card). As such, we regret that you cannot use our card with this motherboard".  However I used the card and board together for over a year using the 3.2 BIOS and Winchester.  Nebula now say that they have had lots of customers with the same problem installing there PCI card into this board and think my evidence may suggest that the BIOS is the problem.  They have asked If I would swap back to an earlier BIOS to see if it starts working again.  However I'm a bit reluctant to start messing about Randomly with different BIOS version as the possiblity of a complete disaster will go up.  Anybody any idea why a BIOS change should stop a device working, or any any experience of which BIOS might work??

    OK MSI support have responded as follows
    "Hi,
    Now we also suggest you flash BIOS to the old version 9.1 to verify, since BIOS 9.1 can support dual core processor. If you don't want to flash BIOS under DOS, it is easy to use another tool to flash BIOS under windows. Please download the tool from the following link:
    ftp/BIOS folder/AWSFI305.
    Please download the BIOS from the following link:
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=608&kind=1"
    I'll have to have a think about this, although I guess it might fix a few other problems that I have.  I assume the windows tool they are referring to is the "live update" If so I thought the general consensus was to avoid using it?

  • DKA790GX(7550 Standard) Bios 1.2 & CPU Support

    Hi All,
    Im new here and currently in the middle of a build, my MB is a DKA790GX with a 1.2 bios and i currently have a AMD Phenom II X4 945 CPU. I no i cannot use the CPU with the current bios version and i need 1.9 minium to get it fully supported by the mainboard.
    The main question is what CPU's are already fully supported by the current bios i have(1.2), as MSI's CPU support list has no CPU that will work on 1.2 as far as i could see and the minium CPU i could see needs bios version 1.4.
    I tied updating the bios with no luck as the MB+CPU combo wont even boot off a CD/DVD or USB to update the bios or even boot the WinXP cd i have to try using the Live Update feature once XP was installed, all try just lean to a "Press ESC To Boot" then a black screen. So i guessing nothing will boot til i get an already supported CPU to update the bios to use the Phenom II i want to use.
    If anyone can help it would be very appriciated
    thanks Pep

    yeah sorry about that, currently have attached
    4GB(2x2GB) Kingston KVR800D2N6/G2 PC2 - 6400 CL6
    IDE Lite-On DVD-RW LH-20A1P(Testing Purposes)
    IDE WD 200BB-60CVBO 20GB HDD(Testing Purposes)
    SATA Maxtor 6B200M0 200GB HDD(Testing Purposes)
    Everything else is onboard, graphics, audio etc...
    Quote
    If you get that message it DOES boot!
    you would think so but after ESC is pressed 1 ram beep is sounded then loads to a black screen, the CD/DVD drive spins up to signify activity but nothing happens same with USB booting, the LED on the USB stick flashes to signify read/write activity but nothing happens and yes its a proper ligit WinXP bootable cd and the USB is also bootable with the bios 1.9 update and flash utility oin it as ive checked them on the current PC im using now and both boot up fine from the boot menu and preselected boot order.
    is there a chance if could be a faulty main board even tho is brand or just needing a fully supported CPU to be able to boot CD/DVD and or USB

  • GT60: Need unlocked BIOS with additional cpu support

    I also need an unlocked bios for gt60
    and supports i7 3720qm
    it is not defined
    thanks!
    ru.msi.com/service/download/bios-18654.html   or other suitable

    The CPU used should be already supported:
     http://www.gentechpc.com/config.asp?config_id=GT60-0ND-250US
    what's your current BIOS version installed?

  • New 3.46 k8t neo2 BIOS and agp lock

    does the agp lock work now?
    or with the 9betas. is it working?
    on k8t neo2
    thanks. i have 3.30 and it'S not working on my board :(

    Quote from: Toaster56 on 24-June-05, 05:01:41
    well i guess the lock is working. i might just have a bad cpu.
    http://img68.echo.cx/img68/7518/agpfre8pe.jpg
    'Bad' would be a subjective statement in this case. If you do have an early batch Winchester, it overclocks less than the later batches. But it still gives you a lot more than you paid for.
    P.S.
    Following your link, I noticed your Vcore is a bit low at 200 MHz. When overclocking, you should raise it some to get above 225 MHz and be stable. At 230, something like 1.49v should do the trick. Also, what kind of power supply do you use?
     

  • Need help with k8t neo ms-6702 and cpu compatiblility question.

    I have a msi k8t neo motherboard socket 754 ms-6702 bios version 2.2 with a athlon 64 2800+ in my computer. I just bought a AMD Athlon 64 3700+ CPU Socket 754 .1MB cache. When i install it, my power goes on and i get no activity. Im wondering if i got a bad cpu off ebay or my bios isnt current enough ( i used msi live updating software and its currently at v 2.2) or does my motherboard not support this high of a cpu? Im not very computer literate.  Thanks for any help and info. If i need to update my bios, i downloaded version 7.1 but i dont know how to flash it, can somone give me the steps 

    I had a bad experience with a 3700 bought on e bay ,turned out to be an engineering sample ."special m/b bios reqd" in my case I did get a boot and the engineering cmos message. genuine 3700 754's are quite rare and fetch premium prices.

  • K8T-Neo2 system POSTs but no BIOS

    Hello all,
    Assembled a new system (specs below). When I attempt to boot it, I get a single short beep (=POST ok, right?)  and the MSI / Core cell logo screen, but can't get to BIOS, let alone open the DVD-ROM tray to load O/S CD.  D-Bracket shows
    RG,    where R=red and G=green
    GG
    which the manual translates as:  "Boot Attempt:  This will set low stack and boot via INT 19h."
    On the front panel the HDD activity light is on.
    System details:
    Motherboard:  MSI K8T Neo2-F  MS-6702E Ver 1
    BIOS Type/Revision:  Unknown, whatever came loaded on a new board. Cleared via the jumper.
    CPU:  AMD Athlon 64 3000+, Venice Core, AMD stock heatsink and fan
    RAM:  Corsair Value Select; currently one 512MB stick in slot 2 (also tried in slot 1)
    Video card:  Jaton 3DForce FX5700LE
    Power Supply:  Antec Smart Power 350W
      +3.3V @ 22A; +5V @ 21A; +12V_sub_1 @ 10A; +12V_sub_2 @ 15A.  +5v/+3.3V max 130W
    HD:  Western Digital WD1200JB, 120GB, 8Mb Cache on IDE1 (master).  New drive, nothing on it.
    DVD-ROM:  Lite-On SOHW-1633S on IDE2 (master)
    O/S:  Not loaded yet!  Will be Ubuntu linux.
    Things that I have tried:
    -Started with both sticks of RAM in slots 1 and 3 and system wouldn't even post.  Removed one stick and I'm at the situation described above.
    -Cleared CMOS
    -Disconnected combined floppy / flash card reader drive from cable and power supply
    -Swapped keyboards.  Note, no mouse connected.
    -Set jumper on HD to master (previously no jumper installed per Western Digital manual for single drive on IDE channel)
    Any ideas what the problem is, and how to fix it?  My own best guess is that the Venice core CPU isn't compatible with the BIOS.  I saw that the new BIOS came out recently.  Should I try flashing the latest BIOS in, and if so, how do I do it on a non-functioning system?
    Thanks!

    Situation update:
    I tried unplugging the HDD IDE cable, and am now able to get into BIOS (thanks Ui30!).  Unfortunately, there are still some problems.  BIOS fails to auto-detect the HDD as Primary Master and DVD-RW as Secondary Master.  I set them to type 9 per the Western Digital install guide, and CD/DVD-ROM, respectively.  (If someone knows what number to enter for "write precompensation" I have the rest of the info to manually configure the HDD).  I cannot edit the boot sequence in BIOS to include these devices.
    On the next boot attempt with HDD reconnected, BIOS reports "Primary Master HDD Error" and "Secondary Mater is ATAPI incompatible".   However, it is trying to read the floppy drive, and I have included it as the 1st item in the boot sequence.  On subsequent boot attempts without the HDD connected, BIOS looses my settings and reverts to "no device" for the Primary Master.
    The BIOS is A6702VMS V3.4B2, dated 2/25/05.  Is flashing the most recent BIOS likely to help any of these problems?  I plan to do this eventually anyway for dual channel memory support.  Is bootstrapping it now off the floppy likely to cause problems worse than what I'm facing already?
    D-Bracket still reports
    RG
    GG
    I tried limiting the RAM to DDR200, but that didn't seem to do anything over the auto mode.
    System gives one short beep during POST, then 2 short beeps, a pause, and 1 more beep when it tries to read the DVD-ROM.  I still can't eject the DVD tray, but since BIOS isn't recognizing the DVD drive, that's not too surprising.
    So, what else should I try?  The goal is of course for the system to recognize the DVD-ROM and HDD so I can proceed with loading Ubuntu.
    Thanks again!

  • K8T Neo2 issues with 2004/9/24 Bios

    Hi there.
    I´ve upgraded my k8T Neo2 with the 2004/9/24 an am having now stability issues with my FX 53 due to inproper fan speed control.
    I have no clue how the fan control works in this Mobo because my observations are really strange. The CPU is now always reaching 70 C and more under load and the fan control seems not to be able to get it keeped cooler. Tried several CPU coolers but it´s always the same.
    If my case is closed, the fan control seems to work and is incrasing the RPMs of my coolers, but having the case opened the RPMs stay at the same level like on Idle.
    However, in both situations the temperature is growing up to 70C and more which results in instabilities at this high temps.
    So before you ask me. I´ve of course upgraded to the latest Core Center too, but it´s the same if it´s either loaded or not, so it´s the Bios if you ask me.
    Also, had not these troubles with the previous Bios.
    All I can say now is that the fan speed isn´t regulated by the CPU temperatutre but something else and it´s not calibrated to support hotter running FX CPUs, though the previous Bios obviously was.
    Last but not least, Cool´n Quiet is also working now under Win2k, but the Legacy USB support isn´t completely fixed.
    I can´t boot neither Win2k nor WInXP with it enabled.

    The system was set up last week, so everything is up to date, also the AMD drivers.
    However, the Bios date code is in the topic header  (2004/9/24).
    It was updated yesterday and since then the CPU isn´t cooled correctly, neither with the Boxed Cooler, nor a Thermaltake Silent Boost or a Zalman CNPS-7000B. No matter the case is closed or opened.
    There is also no problem with the Cool´n Quiet driver or the Cool´n Quiet support anymore. There was just a problem under Win2k and the Bios the Mobo came with, but that´s fixed now with the newest Bios, exept the fan control that is working now incorrectly.
    Don´t remember right now the date code of the previous Bios, but it was the first release and there the fan control worked correctly, so my Athlon 64 FX 53 didn´t heat up as much as now and got no stability problems, simply because it was always kept below the 70ties.
    I don´t think the rest of my rig is of any importance because connecting the coolers to an other surce than the CPU FAN Header and so running them at full speed, doesn´t cause my CPU to become unstable as it doesn´t reach this high temperatures.
    That´s the only problem I´m having now. Everything else is rock stable and up to date.
    What´s about the Leagcy USB support not allowing me to boot the OS´s, I can live with that though it would be nice to get that fixed too.
    So to be more specific. With the previous Bios the fan control kicked in earlier,  way before the temperature reached 70C. Now it kicks in much later. Somwhere in the middle of the 70ties. To late for my FX 53.
    So to speak with the previous Bios the fan control kicked in before the CPU reached the critical temperature and incrased the RPMs at least so far, that the CPU was cooled down to the 60ies. Now it´s just keeping the temperature at the reached level (73-74C ).
    All I want is to get this fixed or even better to add an option into the Bios to select the temperature where the fan control kicks in and incrases the fan speed to keep the CPU temperature at the level you selected.

  • K8T Neo2 Series bios v3.2 released

    MSI has posted bios version 3.2 for the K8T Neo2 series of boards.
    Update description:-
    -Support USB devices under DOS mode.
    -Update CPU Microcode (3000+, 3200+, 3500+)
    -BIOS reported incorrect CPU temperature.

    Hi
    Had opposite prob.
    ATI radeon is iffy, so I was configing it, there are 2 settings in AGP 66 and 75 MHZ, mine works on 66 by ' default', but if I try 75Mhz, its a reset cmos jumper job.  I assumed the monitor driver is at 66Mhz, and that was the root of problem, as Monitor runs on 4 rigs, have not bothered altering display settings.
    cheers
    jocko

  • Is it possible to control CPU fan speed (lower) with K8T NEO2-FIS2R (MS-6702)?

    I have:
    MSI K8T NEO2-F motherboard
    AMD Athlon 64 3000+ processor
    Bios is latest I found, AMI BIOS 9.20
    Operating system is Windows XP pro.
    Processor was boxed and with the normal amd fan.
    Processor fan is plugged in CFAN slot.
    My problem is that the cpu fan spins a bit too fast. Cpu temp stays at 25C and fan is spinning at 1800 rpm.
    Setting manual mode from corecenter didn't change the fan speed at all. Not up or down. Neither can SpeedFan program. But if I stress the cpu, the fan starts spinning faster.
    What is controlling the fan speed and can I manually control it?
    There are no control options in bios.
    If I missed any information, please do ask more.

    Hi,
    Core Center is crap, you can't do anything else with that than uninstall.
    Speedfan works. You'll have to set "PWM 2" from "thermal cruise" to "manual control" somewhere in the advanced configuration menu, I don't remember where you can find that. The help file provided with speedfan is quite good, I strongly recommend reading it carefully. Using speedfan you can also control a second fan connected to the SFAN-connectors.
    The built-in fan control sets the speed of the CPU fan to 2/3 of its nominal RPM value (my fan starts at 2100/min, max is something about 3300/min or so). Its speed increases quite late, on my system at temperatures above 50°C. And it increases quite slowly.
    Michael

  • MSI K8T NEO2-F rev 2.00 (MS 7094) , few questions plz

    Hi,
    first of all, i apologize for my english, it isnt my natural language.
    Few days ago i have bought this mainboard, (my A7N8X-E dlx rev 2.0 have crashed after some years of loyal services) with a AMD64 3700+ pre clock at 260*11 stable on a DFI.
    As i have a 7800GS AGP recently bought, i search a socket 939/AGP mainboard and only found this one in france.
    I know those kind of "cheap" MB arent really designed for o/c, but i was wondering about few options at least, as the desynchronization of pci clock/AGP clock.
    So, when i try to up the FSB, with HT to 4x (800) and RAM to 166, the AGP clock and the PCI clock still up.
    The problem come at 215 FSB, the SATA drive i have isn't properly recognized by the MB, i think the story of the pci clock is involved.
    I search trought this forum how to fix that.
    A post talk about CPUID with the pll ICS 950405 and update and register the value 3F in hexa at he offset 09.
    Obviously, i try it, rslting in a freeze of the computer.
    I also try the core center, wich result in a blue screen of the pc at the launch of the application.
    Well, as i'm kind of "persistant", i translate some german pages (thx google) to search about some beta bios (mod) but don't found anything regular with the 7094 (all beta i found were designed for the rev 1.0 of the board so...).
    Still in this board, someone say he was able to flash the rev 2.0 with a bios designed for the rev 1.0, but as no more info were given on the steps to do it i prefer not to give a try.
    So here are my questions:
    1-) Is there some beta bios or modded ones for the K8T NEO2-F rev 2.00 which enable some "o/c" functions as the vcore, the agp/pci ratio?
    2-) In case the 1-) 's answer is no, is there some tweaking application which allow to bypass those restrictions?
    3-) About monitoring of the fans, as speedfan  dont recognize the mobo, do you some appz which allow this?
    Other information
    i have the bios 3.6
    Video : 7800 GS AGP
    Cooling : Blue orb II
    HDD : 320 Go SATA 16 mo
    RAM : 2*512 PC3200
    ALIM : 550 Watt
    Thank you by advance for your incoming answers :D

    i am still searching some issue
    Few new infos : the ICS used by this mobo is the 950410 and not the 950405
    here some specs of this ICS (full version of the specs can be read @ http://www.idt.com/products/files/2864027/ics950410.pdf?CFID=735117&CFTOKEN=60276634).
    |*******************************************************************************
    |                            COMPONENT: 950410
    |*******************************************************************************
    |
    [Component]     950410
    [Manufacturer]  ICS
    [Package]
    | variable      typ     min     max
    R_pkg           81.1m   62.2m   100.0m
    L_pkg           6.7nH   4.9nH   8.5nH
    C_pkg           0.53pF  0.21pF  0.85pF
    |
    |*******************************************************************************
    [Pin]           signal_name             model_name      R_pin   L_pin   C_pin
    |*******************************************************************************
      1             REF0_FS0                DIO6u
      2             VDDX                    POWER
      3             X1                      DIX
      4             X2                      DIX
      5             VSSX                    GND
      6             MODA_HTT0               DIO10u
      7             MODB_PCI8_HTT1          DIO10u
      8             PCI9_HTT2               DO9
      9             VDDHTT                  POWER
     10             VSSHTT                  GND
     11             PCI11_HTT3              DO9
     12             PCI10/FS_2              DIO10u
     13             PCI0                    DO9
     14             PCI1                    DO9
     15             VSSPCI                  GND
     16             VDDPCI                  POWER
     17             PCI2                    DO9
     18             PCI3                    DO9
     19             VDDPCI                  POWER
     20             VSSPCI                  GND
     21             PCI4                    DO9
     22             PCI5                    DO9
     23             PCI6                    DO9
     24             PCI7                    DO9
     25             SCL                     DI8
     26             SDA                     DIOSDA
     27             M48_24_SEL2448B         DIO6u
     28             VDD2A2D                 POWER
     29             VSS2A2D                 GND
     30             M48_FS3                 DIO6d
     31             POWERDWN                DI9u
     32             TURBO                   DI9u
     33             VSS2A2D                 GND
     34             CPUC2                   DO10
     35             CPUT2                   DO10
     36             VDDCPU                  POWER
     37             VSSCPU                  GND
     38             CPUC1                   DO10
     39             CPUT1                   DO10
     40             VDDCPU                  POWER
     41             CPUC0                   DO10
     42             CPUT0                   DO10
     43             VSS1A5D                 GND
     44             VDD1A5D                 POWER
     45             RESETB                  DOD2
     46             VDDREF                  POWER
     47             VSSREF                  GND
     48             REF1_FS1                DIO6u
    Via the app CpuCool (which know the PLL ICS 950410), i obtain those value in hexa : $07 $F6 $67 $F5 $7F $7F $10 $01 $CC $7F $93 $8C $7E $0F $18 $00
    Turning around some forums (even some russians forum, and no, i dont know russian but he, need take info where the info is) the $7F used in offset 09 (so the 1àth position) should be the PCI lock
    7F(h) = 127 (dec)
    3F (h)=63(dec)
    but changing this value (via clockgen under ICS 950405 which reports the same string of hexa) make pc freeze.
    I also with the help of bosskiller check bios hidden features of the phoenix AWARD 6.00PG with the bin 3.0-3.6 of MSI for the board.
    Nothing seems to have tray with the AGP lock / SATA lock / PCI lock (its why i keep searching around the windows way via PLL edtion)
    Maybe some of you, used to manipulate PLL and/or near of VIA/MSI/Manufacturer of electronic component would share some knowledge around.
    Thx !

  • MSI K8T Neo2-FIR: No fan control since BIOS 3.3?

    Hi!
    First my system:
    MSI K8T Neo2-FIR (BIOS 3.3)
    Athlon64 3000+ Winchester (with Arctic Freezer 64)
    Connect3D Radeon 9700 (Zalman Hetapipe)
    2x512 MB MDT RAM CL2.5 PC3200 (DIMM1+3)
    Terratec Cinergy TV400
    PSU Chill Innovation CP-510A (Click for output ratings)
    Since BIOS V3.3 Speedfan (V 4.20) is not able to reduce the rpm of the CPU-Fan (of course connected to CFAN1). Before flashing BIOS 3.2, it worked well (CPU

    Quote from: Zipfelklatscher on 27-January-05, 16:10:52
    Hi!
    First my system:
    MSI K8T Neo2-FIR (BIOS 3.3)
    Athlon64 3000+ Winchester (with Arctic Freezer 64)
    Connect3D Radeon 9700 (Zalman Hetapipe)
    2x512 MB MDT RAM CL2.5 PC3200 (DIMM1+3)
    Terratec Cinergy TV400
    PSU Chill Innovation CP-510A (Click for output ratings)
    Since BIOS V3.3 Speedfan (V 4.20) is not able to reduce the rpm of the CPU-Fan (of course connected to CFAN1). Before flashing BIOS 3.2, it worked well (CPU < 40°C = Fan spins with 60%). After flashing BIOS 3.3 (because it resolves the problem with USB legacy and WindowsXP), Speedfan (and Corecenter) do not reduce die fan power. If i stay a while in the BIOS, i can hear, how the fan runs lower and lower. But under windows the fan runs on full power.
    I have this problem too.
    I don't have ability to change speed fan for CPU, and then I have 60 degrees on full load.
    When I setup in CoreCenter utility to user mode and fan to high speed, as if by miracle on cpu fan speed change from 1600 to 2400,
    but now it's on 1600 again and setup in core center dont't make any change on speed fan.
    Is it OK in bios 3.2 ? with setup speed on cpu ?

  • Problem with my older K8T Neo2-Fir or my bios?

    Hi there Friends
    Can someone help me with a problem i got. I have installed this video card: 
    Sapphire Radeon X1950 Pro 512MB DDR3 / AGP / 2xDVI / TV-OUT
    On this older motherboard: K8T Neo2-Fir [Gbe Lan;IEEE1394, SATA RAID] Socket 939.
    Do I need a Bios upgrade because this board seams only supporting max 256mb of video memory. Doesn`t this motherboard and bios version supporting 512 mb?
    What should I doing to be able to change my settings in bios to the correct size for the memory. From 256 to 512 mb
    This is my bios: Amibios Bios 9.10
    Someone help me with this problem

    Quote from: Mr Freddy on 03-November-07, 04:39:19
    Thats correct, and i want to setting the right memory size in bios, but i cant doing that in my bios. The maximum value i can choice is 256mb. Do you understand wath i mean? Why cant i change this settings to more than 256mb? Is this because this bios are not supporting more than 256mb? (sorry for my bad english)
    "Thats correct, and i want to setting the right memory size in bios, but i cant doing that in my bios."
    That do NOT setup VGA memory size...
    "The maximum value i can choice is 256mb. Do you understand wath i mean? Why cant i change this settings to more than 256mb?"
    because there no need to be more than 256...
    "Is this because this bios are not supporting more than 256mb?"
    that setting doesn't affect VGA memory size...(you can't change VGA memory size, its fixed...) for your VGA with 512MB memory you should apply 64MB for AGP aperture size.

  • BIOS problems with K8T Neo2

    K8T Neo2, AMD64 3400, 2x 512 3200 DDR (slots 1 & 3), PNY nVidia Quadro FX500, WD Caviar 60GB.
    The system will not boot (cold or warm) without first clearing the BIOS via the JBAT. If I try to restart the system, the LED panel shows four red (processor error). If I clear the CMOS, it will post then say that there was an error in the BIOS. It will then ask if I want to enter the setup (F1) or load defaults and continue (F2). If I go into the setup, make any changes (even just the date and time) and restart the system, it won't post until I clear the CMOS again.
    The owner is getting fed up and is threatening to go buy a Dell, so any help would be very much appreciated!!!
     - Justin

    Pete,
    Quote from: Pete67890 on 16-March-05, 07:53:07
    Not sure how good the beta version is, after flashing I am unable to get the system to post.
    Have you tried bootblock-programming, as described somewhere on MSI website? FDD is needed for that.
    Quote
    Talked with MSI and they are sending me another board and instructed me to re-flash with the same file (3.34).  Apparently it resolves an issue with endusers using an AMD 64 3400+ chip
    This is a CPU that is intended to be sold to OEMs like HP/Medion only. It runs only with 600MHz HTT. Maybe you should ask your dealer to replace that with a retail CPU, e.g. 3200+ with Winchester Core.
    Quote
    and more importantly (see my thread) will fix my problem of not being able to save CMOS settings.
    That might be a problem related to the "wrong" CPU, IMHO.
    Quote
    *One other note, MSI said that I need to change the front side bus to 800 for these processors not 1000 as the default would have it.... If its not changed the system wont post.
    Indeed - had you been able to enter BIOS setup previously? If yes, then try flashing BIOS 3.30 using the Boot Block method and set your HTT to 800. Maybe then you will be able to save your BIOS settings.
    Quote
    If you still want the file, I could send it to you, but use it at your own risk..just post your email.
    I am still interested, just use the "PM"-or Mail-button on the left. Thanks in advance.
    Greets,
    Michael

Maybe you are looking for