K900 clock screensaver - screen lock time display

Hi guys
Can't figure out how to get the time display or a clock as a screen saver or when the screen is locked. I have enabled the screensaver for when it is charging but that obviously only works while it is charging!
Any Ideas?

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)

Similar Messages

LED notification stops by screen lock time out

I found some problem about LED notification. It stops by screen lock time out. My test procedure :- - Screen off by push the top button - Send test e-mail from laptop to my Q10, LED notification will flashing while now is black screen - Call in by another phone then screen will shown at the wall paper - Then after "screen lock time out", screen become dark and now LED flashing will stop So, I can not know the e-mail come in if I leave my phone for a while. Please help

I don't have a PIN lock set up, but still LED notifications for missed calls don't work on my Pre (GSM, o2 Germany), not even after waking up the screen. At least if I only have one missed call. Strangely enough, as soon as I have a second missed call, the LED starts to blink.
My guess is it has to do with the way the phone notifies about missed calls. With only one missed call I don't see a normal notification at the bottom of the screen, but a question dialog with two buttons "call back" and "close". Maybe the phone doesn't treat this as a real notification which would trigger the LED.
As soon as a second call comes in and is not answered, the first missed call notification becomes a real one-line notification at the bottom and the second call gets this question dialog, so maybe this is what triggers the LED notification. But I'm just guessing.
Anyway, this is really annoying. I can't understand why things like these are not found and fixed during testing of the update, this is pretty basic stuff, not any extraordinary user behavior.

[Solved] Screen locker freezes display

I have been using xautolock (2.2-2) with a locker (recently switched to i3lock) for a couple of years now, with no complaints. Over the last week or so, probably related to Xorg updates (currently on 1.11.2-2), whenever slock was activated by xautolock, the entire display would freeze.
Entering my password had no effect, I couldn't switch to console - the only way to recover the machine was SSH in and reboot.
Frustratingly, there was nothing in Xorg logs, syslogs or dmesg.
I switched back to slock (0.9.6) and the same thing happened. Swapping xautolock out for sinac fixed the issue.
While I am happy enough with sinac, has anyone else experienced this? If it's a bug, I'd like corroboration so I can report it.
# edited title to reflect update below...
Last edited by jasonwryan (2011-12-12 21:42:51)

It seems I was too qucik to blame xautolock. Same issue with sinac -- which leads me to believe it is graphics card/driver related.
Card is an Intel 945GME and the driver is the standard xf86-video-intel. Downgrading to 2.16.0-1 seems to have staved it off for the time being...
Possibly related to this thread Display Locks Up on Screen Lock.

Windows 8.1 Screen Locking at Display Turn Off (instead of only at Sleep)

Hi All,
I am having this issue with clients running Windows 8.1 Enterprise, which we are planning to deploy later on this summer.
We currently have a GPO setup for managing the power settings on our staff computers:
This GPO sets computers to sleep after 1 hour, but turn off the monitor after 5 minutes of inactivity
On our Windows 7 systems, the policy applies correctly and if our staff uses their computer before 60 minutes of inactvity (before they go to sleep),
the screens will just turn back on without prompting for login.
I have noticed however on our Windows 8.1 test computers, in the same OU, which receive this policy, that after 5 minutes when the screen goes off, if a staff member attempts to use their computer they will be prompted for a password even though the
unit was not in sleep mode.
Further more, I've noticed that on the Windows 8.1 Systems, I am able to override the "Require a Password on Wakeup" setting using the metro interface, as pictured below (the setting does change in power options as seen below), and does stay in
the No setting even if I run gupdate and reboot.
Any idea how to keep the Require Password for waking up, but not just for computer with the screen powered down?
(I should also not screen savers are not being used)

Hi,
You can tried also set the item Sleep: After 60 min to see what's going on.
On my laptop, once I configure this, the display turns off without lock the computer.
Kate Li
TechNet Community Support

Can u put the world clocks and screen lock on ipod

after installing the updater?
I dont have an ipod, so i cant check that out for myself.

Would be a nice feature though...
Another request to Apple! :-P
Ian

X 1.11 vulnerability (screen lock inefficient)

quoted from http://seclists.org/oss-sec/2012/q1/191
"I recently found out that it is possible to kill a screensaver/screen
locker program on the latest version of Xorg (1.11 shipped with
archlinux, debian wheezy..) using the Ctrl+Alt+Multiply key binding."
proposed workaround quoted from http://seclists.org/oss-sec/2012/q1/197
"As a temporary solution, I've found that commenting lines 44-49 in
/usr/share/X11/xkb/compat/xfree86 (actual location may vary for your
distro; mine is a debian system), which are
interpret XF86_Ungrab {
action = Private(type=0x86, data="Ungrab");
interpret XF86_ClearGrab {
action = Private(type=0x86, data="ClsGrb");
and running
"setxkbmap $(setxkbmap -query | grep layout | awk '{print $2}')"
solves the problem."
Note this is written for debian, but it worked on my Arch Linux too.
Last edited by anubis (2012-01-20 13:42:28)

It's a simple dualhead setup. I don't really have links, when I read, that C-A-* does something weird, I thought hitting C-A-- and C-A-+ sounded like a good idea.
So, I have two monitors connected to my gfx-card. This is how my 10-monitor.conf looks.
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" LeftOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "0" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
# SubSection "Display"
# Depth 24
# Modes "1366x786_60.00"
# EndSubSection
Option "metamodes" "1920x1080,1920x1080; NULL,1920x1080"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "1"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Now when I hit C-A-+, the left screen goes black and "both screens" reside on the right screen, as one big 3840*1080 plane, but I can only see a 1920*1080 portion. I can move the visible portion by moving the mouse towards the left and right edge. Hit C-A-+ again and it turns back to normal.
It seems to be called a "virtual screen": http://www.x.org/wiki/FAQVideoModes#Whe … _want_that
Last edited by Awebb (2012-01-22 12:38:28)

DX650 - Disable Screen Lock

How can I disable the screen lock on the DX650 phone (CUCM 10.5)?
Users don't want to have to enter a PIN number to access the phone.
I have tried different settings of "Require Screen Lock" on the Device page, but no luck.
Thanks, Randy

On the device settings do the following changes:
Display On Time: Change it to your office starting time or a bit earlier
Display On Duration: Change it to the end time of your office or a bit extra
Require Screen Lock : Change it to User Controlled>Check the Override Common Settings
Uncheck the setting: Enforce Screen Lock During Display-On TIme >Check the Override Common Settings
Restart the phone.
Now in the setting of the Android OS you will get an option to make it None. Also you can set a pin and then do a manual lock as required by pressing the lock button on the phone,

Nokia E6 issues -- Screen lock and Connectivity

I have two problems with Nokia E6. Struggling to get resolution
1. My screens get locked automatically with 7-8 sec even though I set up the screen locking time in more than 1 minute. It goes in lock state even you have active application running like reading web page or email. I went to local Nokia priority center and restored to factory setting. Still no luck. I bought the piece in July and I am facing this issue from last 2 months
2. From last 2 days, my internet connection is not working. Service provider has mentioned everything is fine with network. I rebooted the phone and tried to resave the internet connection setting, but no luck.
Please help to resolve these issues

To double-check you have Nokia Belle Referesh, please, enter *#0000# and give use your version. Furthermore, because this is related to MMS,
which network operator do you use, in which country? Finally, because these MMS are send by someone,
which phone is used by the sender?
Is he on the same network?

Screen lock problems with Alarm, etc...

The Alarm notification window goes away too quickly.
I have the screen lock setting ON (so I have to slide the yellow ball up). I also have the screen lock time set to one minute.
When the alarm goes off (IF it goes off, which is another bug) the screen turns on with the slider indicating an alarm is going off, but it quickly goes away.
It doesn't stay active for the minute I have set.
Thus, I have to hit the button, then unlock the screen to snooze the alarm.
Also I noticed that the screen lock, well, works whenever it wants to. Sometimes Im asked to slide the ball, other times I am not. I should be qued to do this every time I tap the power button.
All these little bugs are making me a little leery of my Pre purchase...
Post relates to: Pre p100eww (Sprint)

I was on vacation this weekend and set my Pre alarm to go off both mornings. The first morning it went off, but the touch screen, volume buttons, unlock, etc. were all frozen. Nothing had any effect on the Pre whatsoever. Had to completely shut down the Pre.
The next morning, it simply didn't go off at all. Triple-check the settings, and all were correct. Just deecided to not work.

I activated voice over and screen display is not shown and when touched, says time and "screen locked"

activated voice over and screen display is not shown and when touched, says time and "screen locked"

Hi muhsinmuhmmed,
If you are having issues with Voice Over and a locked screen, you may find the following discussion helpful:
Apple Support Communities: My iPad is locked and I can't type since VoiceOver is active.
https://discussions.apple.com/thread/3933512
Regards,
- Brenden

E7 screen lock without screensaver or black screen...

Is there a way to lock the E7 screen lock without screensaver or black screen?
With the almost over-sensitive touch screen interface there is a constant danger of hitting a function by accident, therefore one must have the screen locked at all times. However, it would be important to see the home screen or the running application.
I use S2PuTTY for work and I need to see the screen, with or without backlight, not a clock display or blank screen. With S60 this was no problem, that's why I have an E72 for backup and SSH use. The E7 would be a better phone for this, if only it would show the contents of the screen while being screenlocked.
Any hacks or software for this? A transparent screensaver perhaps? Anyone..? This instant-blank screen was IMHO a stupid thing to copy from iPhone, especially when it won't even save any battery power because of the backlight and the clock display.

seppuku wrote:
The only way would be extending the screen saver timeout to max 30 minutes (AFAIK).
E7 has an AMOLED display which does not have any backlight, so the less lit pixels on screen the less power it uses.
No, the timeout setting only adjusts the time it takes for an unlocked display to autolock. When it does, it goes black or clock. The same as turning the lock switch.
I need a touch screen with screen on and touch sensitivity off. It doesn't have to be forever, but say 10min at a time would be needed. I'm amazed that the UI designers have forgotten about the possible need to see what the phone is doing while safe from inadvertant touch input.
(You're right about the AMOLED)

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Screen Lock - No Screensaver

Hi all!
Got a Q, ever since upgrading to SL, when i do "Lock Screen" from the keychain access menu item, the screen locks and goes black, but the screensaver no longer activates.
In Leopard, when i locked the screen it let my flurry screensaver run.
Anyone else have this? or is it an upgrade glitch?
Cheers

I see the same behaviour, but I'm not sure whether it is or isn't a bug. However, it is inconsistent with the previous behavior of OS X.
Curiously, in previous versions of Mac OS X (pre-10.6) there was an intermittent bug where the Security pref pane did not respect the "Require password after sleep or screen saver begins" setting. At some point it always defaulted to requiring authentication after the screen saver was triggered (even if that option was unselected).
I have noticed that the "Require password after ..." setting above now works correctly under Snow Leopard (10.6). Perhaps that fix involved decoupling the screen saver from the "Lock Screen" action of Keychain Access? One may rationalize that locking a screen does not necessarily imply running a screen saver.

How can I add the date at the top of the screen along with the day and time display?

Hello,
How can I add the date at the top of the screen along with the day and time display?
Thanks so much!

Open System Preferences>Date & Time:
Ciao.

K900 clock screensaver - screen lock time display

Similar Messages

Maybe you are looking for