K900: no audio from myside on call

Hi,
Please help - as there is no sound from myside on call. As per my frnds & as I hv heared from another mobile there is no sound from my k900.
I also formatted to latest ROM but problem is still there pls help.

Anyone from lenovo support pls help, I think problem is with microphone. Suddenly its not working, I tried calling with Handsfree and it works, the person on other side was able to hear me very loud & clear.

Similar Messages

Help...no audio from iPhone (including calls) except through headphone...

Hi,
I don't know if it's the fault of today's new update, but after adding the new update to my iPhone today, I decided to try the headphones for the first time (I had never plugged them in before).
I could hear through the headphones fine, but after unplugging them, the entire iPhone is now mute.
I tried re-syncing it to iTunes, but I'm still not getting any sound from the phone's speakers. I played with the volume, moving it up and down, but can't hear anything when I try to make calls or listen to music or watch video content.
Has anyone else experienced this issues? Any ideas for fixing it?
Thanks,
Chris
Message was edited by: Chris Fletcher

I had the same problem a few days ago, went to the Apple Store and they told me that after using your headphones, a little switch inside the headphone jack can get stuck. They told me to plug the headphones back in and play a song and pull the headphones out while its playing (this will pause the song) push play and the speaker should work again. You may have to do this a couple of times, they had to with mine.
Hope this helps.
JFSR

With Soundtrack Pro how, please, can I audio from a phone call sound better?

How can I make audio recorded over a telephone sound better... removed hum and clips but it still sounds, well awful. Is there anyway to make it sound, you know, better?

11.1.5
I definitely do not have an unsubscribe button - I've repeatedly tried different variations of Delete, Shift-Delete, Option-Delete, Control-Delete and Command-Delete, have also tried highlighting the individual podcasts and the "parent" podcast.
I must be doing something wrong, but for the life of me I can't see what. It should be a simple procedure.

Incoming audio on iphone 5s call is muffled and too low to hear

Just activated iphone 5s has an audio problem. Incoming calls audio is muffled and to low to hear.

Stop restoring the new phones from your backup, instead set up as a new device.

Satellite L50-A-19N can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
It goes away when I plug out my headphones..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

I see that the option called “give exclusive mode applications priority” has been checked.
Usually different applications and programs can access the sound card simultaneously.
For example: you can hear the sound in game, while you can run your own music via an external player.
This is prevented with these options “give exclusive mode applications priority”.
Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
However, I use Win 7 and Realtek sound driver… It’s another configuration.
So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped!

I have no audio from the mac mini to the hdtv via hdmi cable.

This started immediately after the latest "apple software update" I updated it automatically on 6/24/2011. I have an elgato eye tv connected to the mac mini that provides BOTH audio and video through the HDMI to the HDTV. The elgato eye tv works fine. I get both audio and video.
However, I only get picture and NO sound from the mac mini to the HDTV via the HDMI output. No streaming audio either - only picture. Ive tried pandora, netflix, hulu, etc. I even put in a DVD into the mac mini and again I receive a picture through THE HDMI but no audio.
I've shutdown and rebooted. I've disconnected power and reconnected power. I've gone into the system preferences, audo, and highlight the SONY HDTV as the output. But still nothing. I do notice when I toggle between the "internal speakers' and the HDMI option, the audio arrow on the lower right is bright blue during the internal speakers option but is grey when the HDMI option is connected.
I called apple care. Since I'm 98 days past my 90 days of coverage there is no help via human being. They offered me to set an appointment at the local apple store but they suggested I bring down my 60 inch HDTV with me to the store to be sure it is not a "Sony" issue. I hope someone can help me resolve this without having to put this mac mini on craigslist and taking a $ hit.
This was not an issue yesterday. It became an issue after the latest and greatest "update" to prepare our machines for the lovely lion.
Thanks.

I have the same issue. I also have the 2010 mac mine and use hdmi for audio to my receiver. I get audio from eye tv with no problems, but it seems to lock the path so that only it can use that path for audio. If I restart the computer and do not start eye tv everything else works with hdmi audio. I have tried using the system settings and changing the source there but it doesnt seem to matter.
David

Process audio from mic and play it back. (What is wrong with my code?)

Hi, I am trying to take the audio from the mic (at javasound://0), process it (add the JMF API sample plug in GainEffect.java) and then play the processed data source. The code I have so far is below.
I am getting no errors - compiles fine - but nothing seems to be happening.
The grand goal is to take the audio being captured from the mic and process it in real time using a plug in (not necessarily GainEffect) and also play it back (the processed audio) at the same time.
Where am I going wrong? Thanks!
import java.io.IOException;
import java.util.Vector;
import javax.media.*;
import javax.media.control.TrackControl;
import javax.media.format.AudioFormat;
import javax.media.protocol.DataSource;
public class audioProcess {
     public static void main(String[] args){
          CaptureDeviceInfo audioCapDevInfo = null;
          Vector audioCapDevList = null;
          Vector plugIn;
          Player p;
          Processor pro = null;
          TrackControl[] tracks;
          DataSource ds;
          Vector plug;
          TrackControl audioTrack = null;
          AudioFormat audFormat = new AudioFormat(
               AudioFormat.LINEAR,
               44100,
               16,
               2,
               AudioFormat.LITTLE_ENDIAN,
               AudioFormat.SIGNED,
               16,
               Format.NOT_SPECIFIED,
               Format.byteArray);
          Format[] alinear=new AudioFormat[]{new AudioFormat(     AudioFormat.LINEAR,
                    44100,
                    16,
                    2,
                    AudioFormat.LITTLE_ENDIAN,
                    AudioFormat.SIGNED,
                    16,
                    Format.NOT_SPECIFIED,
                    Format.byteArray)};
        audioCapDevList = CaptureDeviceManager.getDeviceList(audFormat);
        if ((audioCapDevList.size() > 0)) {
             audioCapDevInfo = (CaptureDeviceInfo) audioCapDevList.elementAt(0);
            audioCapDevLoc = audioCapDevInfo.getLocator();
        MediaLocator dest = new MediaLocator("javasound://0"); //take sound captured directly from microphone
        try{
             PlugInManager.addPlugIn("GainEffect", alinear, alinear, 3);
             plug = PlugInManager.getPlugInList(audFormat, audFormat, 3);
             int vectorSize = plug.size();
             if(plug.elementAt(vectorSize - 1).equals("GainEffect")){
                  plug.removeElementAt(vectorSize - 1);
                  plug.insertElementAt("GainEffect", 0);
                  PlugInManager.setPlugInList(plug, 3);
                  PlugInManager.commit();
             pro = Manager.createProcessor(dest);
             pro.configure(); //must configure before call getTrackControls
             while(pro.getState() != Processor.Configured);
             tracks = pro.getTrackControls();
             for (int i = 0; i < tracks.length; i++){
                  if(tracks.getFormat() instanceof AudioFormat){
               audioTrack = tracks[i];
               break;
     //add plug in effect
     try{
          Codec codec[] = {new GainEffect()};
          audioTrack.setCodecChain(codec);
     } catch (UnsupportedPlugInException e){
     pro.realize();
     while(pro.getState() != Processor.Realized);
     ds = pro.getDataOutput();
     p = Manager.createRealizedPlayer(ds);
     p.start();
catch(NoPlayerException e){
     e.printStackTrace();
} catch (IOException e) {
          e.printStackTrace();

Ok, I narrowed my code down to this. There doesn't appear to be any infinite loops in the code now, but perhaps I'm wrong? The processor is realizing, and I am creating a player with the data source output from the processor, yet there still is nothing playing... which leads me to think that there is something wrong with my plug in implementation or my processor creation. Do you have any ideas or points in the right direction?
import java.io.IOException;
import java.util.Vector;
import javax.media.*;
import javax.media.control.TrackControl;
import javax.media.format.AudioFormat;
import javax.media.protocol.DataSource;
public class audioCapture {
     public static void main(String[] args){
          MediaLocator audioCapDevLoc = null;
          CaptureDeviceInfo audioCapDevInfo = null;
          Vector audioCapDevList = null;
          Vector plugIn;
          Player p;
          Processor pro = null;
          TrackControl[] tracks;
          DataSource ds;
          Vector plug;
          TrackControl audioTrack = null;
          AudioFormat audFormat = new AudioFormat(
               AudioFormat.LINEAR,
               44100,
               16,
               2,
               AudioFormat.LITTLE_ENDIAN,
               AudioFormat.SIGNED,
               16,
               Format.NOT_SPECIFIED,
               Format.byteArray);
          Format[] alinear=new AudioFormat[]{new AudioFormat(     AudioFormat.LINEAR,
                    44100,
                    16,
                    2,
                    AudioFormat.LITTLE_ENDIAN,
                    AudioFormat.SIGNED,
                    16,
                    Format.NOT_SPECIFIED,
                    Format.byteArray)};
        audioCapDevList = CaptureDeviceManager.getDeviceList(audFormat);
        if ((audioCapDevList.size() > 0)) {
             audioCapDevInfo = (CaptureDeviceInfo) audioCapDevList.elementAt(0);
            audioCapDevLoc = audioCapDevInfo.getLocator();
        try{
        MediaLocator dest = new MediaLocator("javasound://0"); //take signal from soundcard
             PlugInManager.addPlugIn("GainEffect", alinear, alinear, 3); //register plug in
             plug = PlugInManager.getPlugInList(audFormat, audFormat, 3);
             int vectorSize = plug.size();
             if(plug.elementAt(vectorSize - 1).equals("GainEffect")){ //take the last plug in
                  plug.removeElementAt(vectorSize - 1);
                  plug.insertElementAt("GainEffect", 0);
                  PlugInManager.setPlugInList(plug, 3);
                  PlugInManager.commit();
             pro = Manager.createProcessor(dest);
             pro.configure(); //must configure before call getTrackControls
             while(pro.getState() != Processor.Configured);
             tracks = pro.getTrackControls();
             for (int i = 0; i < tracks.length; i++){
                  if(tracks.getFormat() instanceof AudioFormat){
               audioTrack = tracks[i];
               break;
Codec codec[] = {new GainEffect()}; //add plug in effect
     audioTrack.setCodecChain(codec);
     pro.realize();
     while(pro.getState() != Processor.Realized); //don't move on until realized
     ds = pro.getDataOutput();
     p = Manager.createRealizedPlayer(ds); //create a player using the data source from the processor
     p.start();
catch (IOException e){
     e.printStackTrace();
catch (CannotRealizeException e){
     e.printStackTrace();
catch(NoPlayerException e){
     e.printStackTrace();
catch(UnsupportedPlugInException e){
     e.printStackTrace();
PS - sorry for the late reply.

Iphone 4 no longer changing audio source to make call via in car bluetooth.

Hi, I have an Audi A4, my iphone 4 connects to it, you can look at the directory's, calls made, missed etc,
When you want to make a call or receive a call, the audio source from the phone is not put through the car, its only goes through the phone.
Checking the iphone, it used to show a list of audio sources i.e. the car's bluetooth connection, the speaker or the phone.
No it doesn't show the car's bluetooth.
My HTC Desire S has no such issues and voice can be heard through the car's bluetooth, so I assume that the car's bluetooth is not at fault.
Thanks for any help

I had this same problem with my iPhone 4 and my BMW. I deleted the pairing and paired the phone to the car again, and the same issue occurred.
I reset the iPhone by pressing the on/off switch and the home button and that worked! The audio sources showed up and I was able to get audio from the car.

Exporting 5.1 ac3 audio from Premiere Pro CS4

Hi there,
I wonder if anybody can help me out with exporting 5.1 ac3 audio from Premiere CS4 version 4.1.0?
I have a 3min long HD 5.1 clip that I need to cut down to 60seconds and add fade transitions to. The final clip will be used in a media player with very specific spec - the clip needs to remain HD 1080p with a frame rate of 29.97 and a maximum CBR of 38. The audio must be 5.1 aac. The format can be mpeg 2 or h.264. The overall quality loss needs to be minimal.
Up to now I have been cutting up footage that only needs to be stereo and I found the best way to to this while keeping quality was to use Prem Pro and export as mpeg 2 1080p 29.97, quality:5, bitratre: CBR 38, audio as mpeg layer 2 (as these clips were stereo only). These clips played back fine and looked great so I wanted to keep the 5.1 clip process as close to this as possible.
So far all I have been able to get from Premiere Pro is an audio codec called DVD_LPCM which the media player will not recognise. I'm a bit of a novice when it comes to 5.1 audio so I may be doing something obviously wrong...
- I have purchased the 5.1 surcode codec and its activated.
- I have started a new AVCHD (I need 1920x1080) 1080p 29.97 project with a 5.1 audio master
- The orignal file is an mpeg which I have pulled into PPro and selected Clip > Audio > Breakout to mono
- I take the 6 mono channels in the project panel and put them into thier own mono tracks in the sequence.
- the video I use is the original mpeg with the 5.1audio muted in the sequence.
- When i select each track in the project panel and go to Clip > Audio > Source channel mappings, I see that track has already been allocated a source channel. So I go to the Audio Mixer panel and adjust the 5.1 panners for each tyrack according to what the Source Channel Mapping window has told me - Audio 1 is is L, audio 2 is R, audio 3 is LS, 4 - Rs, 5- C and 6- LFE
- I cut the video and all the mono track to the 60seconds I need and export using these settings:
Video - exactly as before
Audio -
Format - Dolby Digital, Codec - SurCode, Audio Coding Mode: 3/1 (L, R, C, LFE, Ls, Rs - 5.1 Surround), LFE: on.
The clip exports with DVD_LPCM 5.1 audio. Is it to do with the AVCHD preset? Could anyone help me get aac? Any help would be appreciated.
Thanks in advance

Using AME and the SurCode Plug-in, here's how the dialog screen looks for the Audio Tab in PrPro 2.0. It should be similar in CS4:
You do have the Minnetonka SurCode DD 5.1 SS plug-in, right?
Good luck, and hope that this is helpful.
Hunt
PS - note that in the screen-cap, I have composited the dialog box, as though it fully displayed, with no need to scroll it. Depending on your display, you may need to scroll, and your scroll bars will look different from what you see here - just ignore that part of it.
Message was edited by: the_wine_snob - Added PS

Recording audio from a soundboard

Hello fellow iMac'ers, got a brand iMac with OSX Mavericks. I'm trying to set it up to record sound from a Peavey XR1212. I'm a PC guy, so I'm used to using Audacity to do the same procedure, so I downloaded it and tried to get it to work. The soundboard has an "mp3 in" line as well as an RCA out jack. The iMac does not have a mic in line, only a headphone port. I called Apple Support and the representative informed me that the headphone port on the Mac is smart enough to determine whether I would be using it for headphones of a mic in line, so I should put the mic in line there. So my set up was running an RCA jack (red and white connected to soundboard) with a headphone jack on the other end into the headphone port on the Mac. When I began recording on the through Audacity, the program did not show me the soundboard or the RCA jack as one of the available options to choose to record sound from, it defaulted to the internal mic on the Mac as the only option.
I did not try going from the "mp3 in" line from the soundboard (which btw is a headphone port as well) to the headphone port on the back of the Mac. I use an auxiliary cord to play music from the Mac through the soundboard with these headphone ports, but it just didn't seem obvious to me that this set up could be used for recording.
While I was downloading Audacity, the Mac was updating garageband, which I have little to no familiarity with. I have done some research and found out that I could potentially use this to record from my soundboard as well. So finally here is my questions:
1) The back of the iMac has 4 USB ports, 1 FireWire port, 1 headphone port and 1 ethernet port. Since there is no "mic-in" port, what port can I use to record audio from the soundboard in audacity or garageband?
2) If I go from the soundboard with an RCA into the headphone port on the Mac, can I use garageband to record?

Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

Ripping Audio from a DVD to iTunes

Does anyone know a simple way to rip the audio from a DVD to an mp3 for use in iTunes? I have some stand-up DVD's that i would like to listen to when I want.

You have to extract/demux the audio portion from DVDs using a tool like MPEG Streamclip http://www.squared5.com/svideo/mpeg-streamclip-win.html
As most commercial DVDs come CSS encrypted in this case you have to use a so called Ripper to copy the DVD's content first to your HD.

Major Problem with audio from Final Cut to DVd Studio Pro

I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from min DV tape on a sequence or timeline the audio works fine in Final Cut. When I import any type of file and believe me I have been trying all kinds of suggestions and wasting almost a dozen DVDs. Whether it be a Final Cut QT file, going straight to compressor and producing an MPEG-2 file and a dolby audio file .ac3 importing them into DVD SP and making the adjustments that MR. Harbsmeier suggested DIAL NORM at -31dbfs and COMPRESSION MODE to NONE, as well as the suggestion to make an aif file with the audio and importing it into DVD SP as well as the video. I get the same result with every try, the clips made with the firestore are so low you cannot hear them. NOTHING WORKS!!!!. And yes I have tried making a DVD with just digitized footage and yes it turned out fine. I called Apple support today and that gentlemen basically told me I am out of warranty so phone help was not available. However, he made a suggestion of changing sequence presets in Final Cut which has now developed into another problem. I have messed up my settings so bad I don't know where I am I can't LOG & CAPTURE in the manner I used to ???? Could someone please advise as to why this problem exists and the correction to resolve it. I do not understand why the audio works fine playing the sequence on the timeline in Final Cut. It plays fine after making a Final Cut QT file. AND it plays fine in simulation mode in DVD Studio Pro. However after you burn a DVD the audio from the firestore clips are not to be heard unless you crank up the speakers or TV to it's maximum level and you can barely make it out. PLEASE PLEASE PLEASE HELP ME Projects are stacking up and was really hoping to go tapeless

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Looking for a wireless audio from any source`

I have an Apple TV, iPhone 6, and Dell PC. I am shopping for a self-amplified speaker system which can WIRELESSLY stream audio over my home WIFI network (probably not Bluetooth) for BOTH the following:
MUSIC AUDIO, from ITunes, Spotify, apps from iPhone or PC
VIDEO AUDIO, from Apple TV or broadcast TV
Shopping around there seem to be several brands which do one or the other, but it’s not clear to me there is any system that does both. Is that true?
For example, Apple’s AIRPLAY enabled speakers (or normal speakers hardwired to my TV) seem require streaming though Apple TV. Can I also stream Spotify or other apps with AIRPLAY speakers? And NON-AIRPLAY speakers (like SONOS) clearly support most streaming sources, however do they also work with Apple TV for video, and if so without hardwiring the speaker to the TV?
I’m looking for something that does it all, and without complicated workarounds, and with a seamless interface on my device. Wirelessness of the speaker itself—i.e. not hardwired to signal source like SONOS does—would be an added bonus, but not necessary.
Some brands I am looking at: KEF SONOS Bowers & Wilkins Bose
Can you help me, or set me straight if I am wrong about these assumptions?

you should checkout the program called airfoil it let the user stream audio with airplay from any program not just itunes
so that would make spotify be able to play out of airplay speakers be it an Apple TV or airport express with speakers connector or a
device which was build to support airplay

Audio from Flash CS3 Video overlapping

audio from Flash CS3 Video overlapping
help stopping the FLVPlayback instance (which has an instance
name of theVideo) when another button is clicked!
How do I stop flv playback when user clicks a navigation
button ...
Excuse me in advance for asking about a topic that may be
very popular!
I'm using the attached code to go from the main stage to one
subset of .swf files (loaded movies) and I apparently have no
problems with overlapping. Hell, the files even seem to unload
themselves correctly. Then, when I go to my second subset of .swf
files (with the exact same AS3 structure), which has a Flash Video
file (made by the FLV Playback component), I get into an
overlapping problem associated with the audio.
How can I stop, cancel, or unload the audio when the file is
clicked away from (the user selects another button on the main
stage)?
Code attached. Please let me know if anything else is needed.
Yours Sincerely,
Jntspecialty

I have tried to clean up code and do this right.
I need help referencing (storing the value in the variable
"stopsoundoverlapReq") the "flvplayback instance AFTER theVideo is
instantiated (ie, the frame that contains theVideo has rendered)"
correctly.
Also, now I need help with the name of my nav bar button's
method followed by parentheses, which should include the
appropriate method parameter.
On my main timeline, I tried to clean up the code and use:
var stopsoundoverlapReq:FLVPlayback =
stop("videopage.swf/MovieClip(ldr.content).theVideo");
Then for my nav bar button on this same timeline use:
any_btn.addEventListener(MouseEvent.CLICK, stopsoundoverlap);
function stopsoundoverlap(event:MouseEvent):void
stopsoundoverlap.stop(stopsoundoverlapReq);
The 3 errors I get now are :
1046: Type was not found or was not a compile-time constant:
FLVPlayback. var stopsoundoverlapReq:FLVPlayback =
stop("videopage.swf/MovieClip(ldr.content).theVideo");
1061: Call to a possibly undefined method stop through a
reference with static type Function.
stopsoundoverlap.stop(stopsoundoverlapReq);
1137: Incorrect number of arguments. Expected no more than 0.
var stopsoundoverlapReq:FLVPlayback =
stop("videopage.swf/MovieClip(ldr.content).theVideo");

K900: no audio from myside on call

Similar Messages

Maybe you are looking for