K9A2 CF - RAID Drives for Server 2003

Hi,
I am trying to load Server 2k3 (standard) onto this board, I have 4 drives, 1 RAID0 array with 2 x 80G HDD's, 1 RAID1 Array, 2 x 500G drives.
Problem is, I can't get any of the driver's supplied on MSI's website to be recognised by windows (at F6 stage). 
I would greatly appreciate it if someone could point me in the right direction of a drivers / floppy image.
Many thanks.
Snakefood

Ello guys, managed to get it sorted.  Problem was caused by my floppy drive; wasn't reading the disks properly.
Resolved it by creating a new setup disk with the drivers slipstreamed into the process.
XP drivers worked.
Ta once again for the advice.
Snakefood

Similar Messages

  • K8n neo2 nv raid driver win server 2003

    does anyone know how to get raid to work under win sbs 2003?
    win sbs seems not to like the included drivers and i can't find others...
    has anyone had the same problem?

    Do you have the K8N Neo2 platinum motherboard? If yes, I might have had the same problem.
    I have two Maxtor 200GB SATA disks which I also configured to run RAID0. The BIOS setup and Raid configuration ran fine, but when it came to installing WinXP the screen suddenly turned black. However, if I waited long enough the Windows Xp installation would return to the blue installation screen, and tell me, that it couldn't detect any harddrives.
    By reading some posts on a newsgroup I found out, that it's better to use the SATA connectors 3 & 4 instead of 1 & 2. They also mentioned that this problem happened to occur especially if you are overclocking your system, since SATA 1 & 2 aren't "locked" (whatever that means? I suspect it refers to the frequency the ports use to communicate).
    I now have my disks connected to SATA 3 & 4 and have turned my "HT Frequency" in BIOS down to "4x". I haven't had any problem since - but my system is also only 4 days old.
    I hope this helps you.

  • Officejet 8500 a910 driver for server 2008

    I was checking out drivers for the Officejet 8500 A910 a few weeks ago and there was a driver for Server 2008 and not Server 2003.  That was ok because we were migrating to server 2008 R2.  Tried to download driver today and now there is not driver for server period.

    Hi,
    Below are the drivers for Win Server 2008.
    HP Officejet Pro 8500A e-All-in-One Printer - A910a
    Microsoft Windows Server 2008 x64
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=bi-109383-2&cc=us&dlc=en&lc=en​...=
    Microsoft Windows Server 2008 W32
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=bi-109382-2&cc=us&dlc=en&lc=en​...=
    Hope this works for you.
    I am a HP employee.

  • Need RAID Driver for 64-bit WXP - Qosmio F30

    Hi everyone..
    I'm looking tor Raid driver for winXp x64 bit...
    My laptop is Qosmio F30-140
    Please help me to find it..
    Thanks for help..
    Salam

    Hello
    I Have RAID Driver for Windows Vista x64
    http://cdgenp01.csd.toshiba.com/content/support/downloads/raid011016vista_os2007087a.exe
    try it on XP 64 i think it will work
    Reaver

  • Need RAID driver for k8t master2-far package didnt come with disk driver

    I bought the K8T Master2-FAR and the VIA VT6420/VT8237 Disk Driver was not included. I'm trying to install WinXP64 but I need the raid driver before I can. I went to the download section of msi and select my board but the drivers are all 32bit when i tried to use them. There are several 64-bit drivers on the msi cd under Adaptec and LSI but not sure which one of these would work for me. Can someone show me where I can get the correct 64-bit raid driver for my board?
    Thanks for your time.

    Hi all , I have a  MSI K8N MASTER2 FAR S940 SLI MAINBOARD with 2 raptor wd and I need raid driver (for hardware raid). Help me!!! 

  • Security Patch for server 2003

    Hi Friends,
    Can anyone confirm if Microsoft releasing new security/critical patches for server 2003 STD/ENT versions or not !!

    Hi Mr. Rohit,
    You can refer the Microsoft Update Catalog the Microsoft Update Catalog provides updates, including drivers, that are for distribution across a corporate network. For non-corporate
    scenarios, we recommend you use automatic updating or the Microsoft Update website.
    Microsoft®Update Catalog
    http://catalog.update.microsoft.com/v7/site/home.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Need Nokia cable driver of CA-53 for server 2003

    I have search the site but not able to get the nokia cable driver of CA-53 for Window server 2003.
    On previous operating system XP. Its was working correctly. But when I update the Operating system to Server 2003. PCsuite fail to connected the Mobile (N73).
    Its asking for the driver which not available on the site.
    Does anybody knows it?

    Does windows install drivers for your phone?
    (you can check this from windows device manager)
    And when you open Nokia connection manager, is there USB connection available?
    Also, what PC Suite version are you using?
    Message Edited by miksu on 20-Apr-2008 07:51 AM

  • TS140 RAID-Driver for Win7 32bit

    Hi, i will install Win7 32bit on a TS140, Model: 70A5. I try this one: http://support.lenovo.com/us/en/products/servers/thinkserver-tower-servers/thinkserver-ts140/downloa...
    Then i get an error message that this driver is not working with the os.
    What is the correct driver for RAID in a TS140 Server with Win7 32bit?
    Many thanks.
    Markus

    Can you please give full model info - it is 10 characters (6 more following 70A5) ?
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

  • Optiplex 360 drivers for Server 2003

    I have an Optiplex 360 that is running Windows Server 2003 and the video card does not have any drivers loaded for it. I believe it has the Intel graphics installed, of the 4 I see available on this PC, but I have been unable to find a suitable driver for it. I have tried downloading the drivers from support but none of them work. Any suggestions would be greatly appreciated.

    With older drivers there may be certificate issues meaning that you will have to roll back the date / time and or install the driver in compatability mode.  Directx and Video and Audio Service and drivers are DISABLED BY DEFAULT in 2003 server.   I installed 2003 server on my 360 and it worked fine including the drivers. But its  not cookie cutter out of the box.  You have to enable the proper services BEFORE installing the drivers.  The intel Drivers are not the proper drivers for an addin video card AND Chipset Drivers MUST BE INSTALLED first before anything else.The forum is not a step by step support for an end of life operating system on an unsupported platform.  Even microsoft paid support does not accomodate teaching how to install server drivers on non servers.
    Intel Chipset Software Installation Utility, v.9.1.1.1015, A01 View details
    R227558.exe
    Intel G31/G33/Q33/Q35 Graphics Controller, v.6.14.10.4957, A06 View details
    VIDEO_DRVR_WIN_R234838.EXE
    Analog Devices ADI 198x Integrated High Definition Audio Driver View details
    R228747.exe

  • T500 Drivers for Server 2003

    Hello,
    I have installed Server 2003 on lenovo T500, but i cant find drivers for it.
    Does anybody know where i can get drivers for it?

    With older drivers there may be certificate issues meaning that you will have to roll back the date / time and or install the driver in compatability mode.  Directx and Video and Audio Service and drivers are DISABLED BY DEFAULT in 2003 server.   I installed 2003 server on my 360 and it worked fine including the drivers. But its  not cookie cutter out of the box.  You have to enable the proper services BEFORE installing the drivers.  The intel Drivers are not the proper drivers for an addin video card AND Chipset Drivers MUST BE INSTALLED first before anything else.The forum is not a step by step support for an end of life operating system on an unsupported platform.  Even microsoft paid support does not accomodate teaching how to install server drivers on non servers.
    Intel Chipset Software Installation Utility, v.9.1.1.1015, A01 View details
    R227558.exe
    Intel G31/G33/Q33/Q35 Graphics Controller, v.6.14.10.4957, A06 View details
    VIDEO_DRVR_WIN_R234838.EXE
    Analog Devices ADI 198x Integrated High Definition Audio Driver View details
    R228747.exe

  • Network Load balancing for Server 2003 and Server 2012

    Our environment currently has 2 web servers running Windows Server 2003 with Network Load Balancing.  We are looking to update the servers to Windows Server 2012.  Is it possible to add Windows Server 2012 into the Windows Server 2003 Network Load
    balancing cluster?  This way we could bring up 2 new servers add them into the network load balancing and then take out the 2003 servers without disrupting our production.
    Any thoughts or suggestions on how to make this work properly?

    Hi,
    You can upgrade an existing Network Load Balancing (NLB) cluster to Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012 by taking the entire cluster offline
    and upgrading all the hosts, or you can leave the NLB cluster online and perform a rolling upgrade. A rolling upgrade entails taking individual cluster hosts offline one at a time, upgrading each host, and returning the host to the cluster. You continue upgrading
    individual cluster hosts until the entire cluster is upgraded. A rolling upgrade allows the cluster to continue running during the upgrade.
    The related KB:
    Upgrading an Existing Network Load Balancing Cluster
    http://technet.microsoft.com/en-us/library/cc731691(v=ws.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Oracle Download for Server 2003 32 bit on OTN

    Looks like this download is a patch, not the binaries for windows 2003 server. Just a heads up.
    I tried calling this one in, but Tina at the 800-oracle1 number was about as much help as a sack of dirt and had quite and attitude to boot.

    Thanks. I should have dug a bit deeeper.
    I read the doc you referred me to and found that it references DB install only... I only need the client and OLE DB.
    Is it recommended to install this patch for the client?

  • Satellite Pro L300 (PSLB9E) - need wireless drivers for Server 2003

    Hi all,
    I have put server 2003 on my new laptop for a university project. Ive got everything to work except for the wireless. Ive tired the latest drivers from the support site for this laptop but they have not worked.
    Does anyone know if there are any drivers for my wireless card so that it will work on server 2003? Or how can I find out exactly what wireless card I have in the machine as I have been told it may not be a Intel card it could be a Atheros card?
    Thanks

    Hello Jack
    Server 2003 is not supported on Toshiba notebooks and you must try to find it somewhere on the net.
    According the notebook specification your Satellite Pro has REALTEK 802.11(B/G) 13CH-RTL8187B WLAN card.

  • Best external hard drive/RAID drive for weddings and events

    Hello,
    With all the drive possibilities out there, what would be the best, most reliable, and cost effective external hard drive/RAID drive to purchase for weddings/events and other videos on a single computer system?
    Thanks,
    Jordan

    Brian
    Did read your other posts and agree with them.
    As we all know, it will depend on the amount of footage and resolution as to how much needs to be transported around. Given that its DV or HDV and I'm guessing only a few hours of fottage then there are a few 2 drive esata boxes about which are as portable as some lacie/gtech drives.
    www.caldigit.com/S2VRDuo.asp
    or one of the new GTech drives that have a sata port as well as fw could be good.
    Re the 2 bus issue, I would be delighted to be wrong about it. It is through the Avid tech support that I got this info. Todate, I have not been able to get my avid mojo to work on a Lacie PCMCIA FW card at the same time as I have FW drives attached. This seems to sugest that they are not 2 busses, to an avid at least.
    Thats why, for portable editing, I am moving towards a macbook pro with esata card for storage and fw free for other uses.

  • Best raid drive for uncompressed 10bit HD?

    Anyone know what sort of Raid drive I would need to ingest HD at uncompressed material.
    I know I need somewhere in the area of 350mbps/sec speed but can't seem to find any near that spec. So not sure where to look, any suggestions would be great.
    Thanks, Mungo

    For 10 bit 4:2:2 you only need to roll like 200MB per sec. It's data rate is around 167 or so depending on the codec/capture card.
    SATA drives write in packets so you need higher rates because you might slow down for a sec (look at the graph in Speed Test apps) Whereas SCSI and other drives stream their data... and cost more.
    I use the little G-Tech G-speed fiber drives, more money but you can share them on a SAN later if you add a machine. If you will never do that, then go with a speedy sata version. Look at their ES series. I've used 2 of those in a raid 50 with great results. Note: 4 sata drives in a raid 5 or raid 3 will not reliably do uncompressed HD in most situations. Raid 0 is different of course. Now, get Googling.

Maybe you are looking for

  • My iPod Touch isn't being recognised on iTunes on my windows xp pc

    Help, I have been trying to sync my iPod touch with my iTunes for over a week now, I have read upon troubleshooting and other various problems. I have downloaded the up to date iTunes but still will not recognise it. When I plug the iPod in, in makes

  • How to display table in smartforms

    hai I want to display the output in table.. how to set table.. I tried with the display framed framed patterns but its not working.. is that right method?? pls give suggestion

  • How to get Logic's "Open" command to look in last place a file was opened?

    Hi all, All of the sudden, when I "Open" a file in Logic, instead of looking in the folder I last opened a file Logic takes me way deep into the system library and I have to navigate all the way out by hand to my music folder. How do I set the defaul

  • Safari incompatibility with MS Office for MAC

    Ever since downloading and installing Safari Version 4 two days ago, I am unable to open MS Office for Mac. Entourage, Powerpoint, Word, and Excel are all affected. Any suggestions?

  • Burning music on cd 12/17

    I have a macintosh hd burner; i down loaded onto my new computer; is this part of the problem? -i burned 5 cd's now -non of them will play in the car or a stereo; disc unreadable. ejects from car stero and won't read on sony cd player - i changed the