K9A2 CF Suspend to RAM not working?

Suspend to RAM worked for a little while but the last three restarts have failed. I'm using beta BIOS 1.21 and 32-bit WinXP. BIOS 1.1 never worked. Is anyone else having problems? I've set the BIOS to use S3 instead of the default S1 and tried enabling force GPU to POST on restart (or whatever it's called).

Yes, I installed the Phenom drivers from amd.com.
My old board had a nForce 570 Ultra chipset.
I want 64-bit Vista for the 64-bit part. Only being able to use 3.25GB of my 4GB RAM annoys me. I could put Fedora 8 on it but then I couldn't play games very well (yes, I know about Cedega). Could run other stuff in a 32-bit WinXP VMWare Player instance though, and upgrade to 8GB RAM, hmm.

Similar Messages

[Solved] Suspend to RAM not working.

I just installed Arch on an old box with an MSI K8T Neo motherboard and I can't get suspend to RAM working. On the BIOS I have two ACPI modes: S1/POS and S3/STR. If I set it to S1 it does suspend but the hardware is not actually shut off (the fans, LEDs, and monitor backlight says on). With the S3 setting it does a complete shutdown so when I turn it back on it fresh boots instead of resuming. Suspend to both effectively hibernates when the BIOS setting is S3, with S1 it behaves just as suspend to disk. I've tried using systemd, pm-utils, and writing to /sys/power/state directly. All the same.
Just until last night I had Windows XP x64 installed and suspend was working just fine. I mostly use it as a file and printer server but I don't want it running all the time so I use Wake-on-Lan so it wakes up on demand and I'll be using a cron script (or whatever is called on systemd) to put it back to sleep after a while.
Any suggestions?
Last edited by fernan82 (2014-11-15 00:33:50)

Flashing the bios fixed the problem. I didn't do it before because the readme that comes with the bios firmware said it was the version I had but it's actually 5 major versions newer.

Resume after suspend-to-ram not working whit catalyst

$uname -a
Linux drog-laptop 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
$ pacman -Qs catalyst
catalyst-hook 12.6-3
catalyst-utils 12.6-1
lib32-catalyst-utils 12.6-1
/var/log/pm-suspend.log
http://pastebin.com/kWMWKqBy
groups
lp,wheel,games,video,audio,storage,power
The suspend works fine with foss, but fails with catalyst
EDIT:
kernel line: root=/dev/sda1 ro nomodeset vga=0
lsmod
http://pastebin.com/NHpZRTv0
i have xorg-server 1.11.4-2
Last edited by drog (2012-07-23 17:31:43)

I have a Dell Studio 1555 - ATI 4570 with stock kernel26_x86_64 (2.6.33.3-1), catalyst 10.3 and all is woking ok (hibernate/suspend/restore).
The "multibyte access to EC" patch is added to stock kernel and all related problems is gone for me.
It is a problem with restore from suspend (black screen) because of catalyst 10.4, but until that problem is solved I keep catalyst 10.3.
I posted that problem here:
http://bbs.archlinux.org/viewtopic.php?id=96482
If you use xf86-video-ati driver, I don't know what is the problem.
When I tested open source ati driver to see if powersave features is added, suspend/resume was working for me, but no luck with powersave features, so I stay with catalyst driver)
Last edited by mits (2010-05-07 10:16:36)

Suspend to ram stopped working with Acer Aspire 5930G - Arch64

Suspend to ram recently stopped working on my laptop running Arch64. When ever I press the suspend to ram button in kde4 simply nothing happens, no screen flashing or error messages of any kind. I tried to install the pm-utils package and run pm-suspend, but with the same result. The program just ran and nothing happened and no feedback, not even in dmesg.
Here are the recent packages I've installed:
[2009-05-20 00:53] synchronizing package lists
[2009-05-20 00:53] starting full system upgrade
[2009-05-20 00:54] upgraded cpio (2.9-4 -> 2.9-5)
[2009-05-20 00:54] upgraded curl (7.19.4-1 -> 7.19.5-1)
[2009-05-20 00:54] upgraded gconf (2.26.1-2 -> 2.26.2-1)
[2009-05-20 00:54] upgraded glib2 (2.20.1-1 -> 2.20.2-1)
[2009-05-20 00:54] upgraded gmp (4.3.0-1 -> 4.3.1-2)
[2009-05-20 00:54] upgraded gsl (1.12-1 -> 1.12-2)
[2009-05-20 00:54] upgraded gstreamer0.10 (0.10.22-1 -> 0.10.23-1)
[2009-05-20 00:54] upgraded gstreamer0.10-base (0.10.22-1 -> 0.10.23-1)
[2009-05-20 00:54] upgraded irssi (0.8.12-5 -> 0.8.13-1)
[2009-05-20 00:54] upgraded libdrm (2.4.9-1 -> 2.4.11-1)
[2009-05-20 00:54] upgraded libsndfile (1.0.19-1 -> 1.0.20-1)
[2009-05-20 00:54] upgraded mesa (7.4.1-1 -> 7.4.2-1)
[2009-05-20 00:54] upgraded netcfg (2.1.3-3 -> 2.2.0b1-1)
[2009-05-20 00:54] upgraded poppler (0.10.6-1 -> 0.10.7-1)
[2009-05-20 00:54] upgraded poppler-glib (0.10.6-1 -> 0.10.7-1)
[2009-05-20 00:54] upgraded poppler-qt (0.10.6-1 -> 0.10.7-1)
[2009-05-20 00:54] upgraded ppp (2.4.4-7 -> 2.4.4-8)
[2009-05-20 00:54] upgraded psmisc (22.6-2.1 -> 22.7-1)
[2009-05-20 00:54] upgraded pycairo (1.8.2-1 -> 1.8.4-1)
[2009-05-20 00:54] upgraded subversion (1.6.2-1 -> 1.6.2-2)
[2009-05-21 12:57] installed festival (1.96beta-2)
[2009-05-21 13:01] installed festival-awb-arctic (1.0-1)
[2009-05-21 13:03] removed festival-awb-arctic (1.0-1)
[2009-05-21 13:03] removed festival (1.96beta-2)
[2009-05-21 13:48] installed libmikmod (3.1.12-2)
[2009-05-21 13:48] installed smpeg (0.4.4-5)
[2009-05-21 13:48] installed sdl_mixer (1.2.8-3)
[2009-05-21 13:48] installed ode (0.11-1)
[2009-05-21 13:48] installed sdl_ttf (2.0.9-1)
[2009-05-21 13:48] installed sdl_net (1.2.7-2)
[2009-05-21 13:48] installed xmoto (0.5.1-2)
Note, I tried to do a -Syu just now and got a new kernel, but it did not change anything.
EDIT: I'm also currently running the nvidia 180.60 driver.
Last edited by Avenger (2009-05-22 17:52:05)

search the forums: http://bbs.archlinux.org/viewtopic.php?pid=556030
in the future, i would definately use yaourt to upgrade since it displays better what is being updated and from where.
edit: if pm-suspend fails, check its log (/var/log/pm-suspend.log)
Last edited by eldragon (2009-05-22 18:16:08)

Systemd: Suspend and Hibernate not working

Hi,
When I try to hibernate my Notebook using systemd with 'systemctl hibernate', it sometimes (from time to time it even works) fails with the error message "a dependency job for hibernate.target failed". In the journal I see the following:
The system clock has been changed to REALTIME microseconds after January 1st, 1970.
Jun 04 23:52:57 localhost systemd[1]: systemd-hibernate.service: main process exited, code=exited, status=1/FAILURE
Jun 04 23:52:57 localhost systemd[1]: Failed to start Hibernate.
-- Subject: Unit systemd-hibernate.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit systemd-hibernate.service has failed.
-- The result is failed.
Jun 04 23:52:57 localhost systemd[1]: Dependency failed for Hibernate.
-- Subject: Unit hibernate.target has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit hibernate.target has failed.
-- The result is dependency.
Jun 04 23:52:57 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Jun 04 23:52:57 localhost systemd[1]: Unit systemd-hibernate.service entered failed state.
Jun 04 23:52:57 localhost systemd[1]: Stopping Sleep.
-- Subject: Unit sleep.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has begun shutting down.
Jun 04 23:52:57 localhost systemd[1]: Stopped target Sleep.
-- Subject: Unit sleep.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has finished shutting down.
:x
Any ideas? Furthermore, during hibernate (when it works) my screen first gets black, the system comes back and only then it really hibernates.
Others suggest switching to linux-lts. Does that really make sense? Isn't this a systemd issue?
suspend sometimes fails to work either (screen gets blank, but system weaks up after a few seconds again):
Jun 05 06:59:14 localhost systemd[1]: Stopping Sleep.
-- Subject: Unit sleep.target has begun shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has begun shutting down.
Jun 05 06:59:14 localhost systemd[1]: Stopped target Sleep.
-- Subject: Unit sleep.target has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit sleep.target has finished shutting down.
Jun 05 06:59:14 localhost systemd[1]: Reached target Suspend.
-- Subject: Unit suspend.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit suspend.target has finished starting up.
-- The start-up result is done.
Thanks,
Michael

Thanks, but I do not call systemd-sleep manually, I just do the ordinary "systemctl hibernate".
Unfortunately, the error "A dependency job for hibernate.target failed. See 'journalctl -xn' for details" just happened again. Alas, I'm not able to debug it according to the manual (https://wiki.archlinux.org/index.php/sy … emd_errors). When I try to get the log messages for the PID that causes hibernate.service to fail, I don't see anything suspicious in the logs:
$ sudo systemctl status systemd-hibernate.service
systemd-hibernate.service - Hibernate
Loaded: loaded (/usr/lib/systemd/system/systemd-hibernate.service; static)
Active: failed (Result: exit-code) since Fri 2014-06-13 14:32:52 CEST; 12min ago
Docs: man:systemd-suspend.service(8)
Process: 26712 ExecStart=/usr/lib/systemd/systemd-sleep hibernate (code=exited, status=1/FAILURE)
Main PID: 26712 (code=exited, status=1/FAILURE)
Jun 13 14:32:37 localhost systemd[1]: Starting Hibernate...
Jun 13 14:32:37 localhost systemd-sleep[26712]: Suspending system...
Jun 13 14:32:52 localhost systemd[1]: systemd-hibernate.service: main process exited, code=exited, status=1/FAILURE
Jun 13 14:32:52 localhost systemd[1]: Failed to start Hibernate.
Jun 13 14:32:52 localhost systemd[1]: Unit systemd-hibernate.service entered failed state.
$ sudo journalctl -b _PID=XXXX
-- Logs begin at Thu 2013-09-26 16:12:25 CEST, end at Fri 2014-06-13 14:43:40 CEST. --
Jun 13 14:32:37 localhost systemd-sleep[26712]: Suspending system...
Any ideas?

2 x 1GB 533/667 RAM not working in Satellite M40-289 notebook

Hi all.
I have recently tried to upgrade the RAM in my Satellite M40-289 notebook.
The support site says it can take up to 2Gb of 533MHz RAM, in two 1GB sticks.
So, I bought two AData PC2 4200S 533/667MHz RAM sticks and installed them, but they do not work, either singly or together - the computer just goes into a beeping hard drive grinding death spiral until I remove the battery.
They do, however, work if I install one of them with the original stick. What I am figuring is that as they are 533/667 RAM sticks, on their own they are trying to run at their top speed, but with the factory stick installed too they are slowing down to its speed and running correctly.
So, I have increased my RAM from 512 to 1.5Gb for the price of 2Gb, and have a useless stick of laptop RAM.
Flashing the BIOS did not help this - the update which was posted on the Toshiba site last year for my notebook upgraded the BIOS from v1.2 to v1.2. Go figure.
Is there any way of forcing the RAM to run at the correct speed? Is there a hidden BIOS update that could solve my problem or is this likely to be something with the RAM?
All help is gratefully received.
kind regards
Grey_Area

Hmm. The matched pair I bought said they would run at 533 or 667, but didn't run together. I only got one to work when laid next to the 512Mb module that came with the laptop and only runs at 533. Fortunately the reseller bought the RAM back from me so I am not out of pocket, but I think then I have to try and get hold of another 1Gb module that only runs at 533 if I want to have access to the full 2Gb max RAM that the laptop will take.
Thanks for you response, I did not know about the FSB thing though. Cheers. We'll have to see what I can get up to!
kind regards
GA

Hibernate and suspend to RAM dont work!

Hi
whenever I try to suspend to RAM or hibernate my PC, they never get back! In both situations I get a screen full of garbage! Any ideas?
My PC is
K8N Neo2 Platinum
A64 3500
1GB RAM
X800XT Ocuk Edition (unlocked X800Pro)

You may try different suspend states in the bios.
As for Hibernate, it should always work. Hibernate is more of a windows feature and has nothing to do with Suspend. Basicly windows writes the content of the ram to the harddrive and shutdowns completly. When booting it will load the saved state instead of the regular boot. In theory, even a 486 should support Hibernate.

Suspending service does not work and I keep getting an error message (South Korea)

Hi, I am currently back at home at South Korea during the summer and I cannot seem to suspend my service.
I continue to get this error message saying that suspending service is not available at the time and that I should try again later.
I got this message over the past 10 days and I cannot seem to suspend my service.
Since I am in South Korea, customer service live chat does not even work.
Is there anyway possible I could suspend my line before I get into a new billing cycle?

How To: Direct Message and Joe L

Z97 Gaming 5, Dual Channel RAM not working?

Here are my specs for the moment , Windows 7, Intel Core i7 4770k, 8,00GB Single-Channel DDR3 @ 666MHz (9-9-9-24), Nvidia GeForce GTX 780 (EVGA)
As the title says dual RAM is not working, when I put all 4 RAM sticks in their slots or even just two in dual channel mode my monitor will not respond and the screen is just black, can't even go to BIOs.
The BIOs settings are at 1333 MHz and 1.5 v, I've tried raising the volt and lowering it, anyone have any ideas?
I've tried the 1-3 and 2-4 slots with two 4gb sticks and it does not work, but the 1-2 and 2-4 works fine, have also tried all the individual sticks so none of them are faulty.
RAM: Corsair XMS3 DDR3 1333MHz 16GB KIT CL9 4x4

Quote
I've tried the 1-3 and 2-4 slots with two 4gb sticks and it does not work, but the 1-2 and 2-4 works fine, have also tried all the individual sticks so none of them are faulty.
Please clarify. You mean a single stick works in 2 or 4 but not 2 and 4 together? So that means DIMM slot #3 is the only one that doesn't work at all? My suspicion is a grounding or short under the mainboard by an errant standoff, or the DIMM slot has some debris in it, or the slot is just plain faulty. Other possible is a pin problem in the CPU socket.

New RAM not working

I have a macbook pro 13 inch from mid 2010, with an Intel Core 2 Duo 2.4GHz. I recently got a 1 TB WD Scorpio Blue for it that made a loud buzzing noise and after having the OS installed, wouldn't boot properly. I will be exchange this drive for a new one of the same type because I know it works since it worked in my sister's MBP mid 2009.
I also got some 2x4G of mushkin RAM (996644) for the computer. This is not apple certified but fits all the required specifications. The guy at the store told me that apple approved memory is the same thing just tested on a mac giving them an excuse to charge mor for it so this saved me six bucks. I tried installing both the hard drive and the ram and I got a POST error of one beep which means a RAM problem. I reinstalled the ram and instead of a POST error I got a black screen with no sounds. The LED was on. I put the old RAM in and it worked letting me install the OS. The hard drive had problems so I took it out, put the old one back in and the new RAM in. Same black screen.
Is there any solution here, or is the RAM defective and should I get a new chips?

If the old RAM works and the new does not, it makes no sense to keep it. The two most reliable sources for MBP RAM are OWC and Crucial.
Sometimes inexpensive RAM does work but as you can see what you have is a lemon. To a degree the sales person was correct, biut only that Apple does charge a lot for the RAM they sell. I suggest spend a bit more and get the afore mentioned RAM. If you search Amazon.com, the Crucial prices are quite good,
The RAM specifications for a 2010 MBP are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
Ciao.

RAM Not working properly and files not deletes (2 in 1)

Hello. Ive installed 6Gb of ram on my iMac, and system shows all 6. But in-use only 2. When im restarting computer, its works normaly, but when trying to open any default app - 4gb disappears =( U can see this on screenshot here: http://photo.vibos.org/#287 ... How can i fix this? And why its happening?
And second problem:
ive deleted some files from external hdd to trash and now cant empty her =(
when im clicking on "empty" or "safe empty" my CPU and RAM uses for 100% and then computer freezes. cant understand how delete this files from trash =(
hdd is SATA, 1Tb and used before in windows, so its has ntfs file system. om my mac im using paragon ntfs as active solution and mac fuse as secondary, not active rigth now.
Thx 4 help and sry f
P.S.: om my mac book i cant install photoshop because i have extended fs with registry (or some like that). how can i change fs type or install ps on other partition of hdd?

The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
You can try doing a SMC reset however I don't think that is the solution.
SMC RESET
• Shut down the computer.
• Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
• On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
• Release all the keys and the power button at the same time.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.

[SOLVED] Can't get suspend to ram to work (pm-utils)

It suspends, but then when I wake up my desktop the display is black. I followed the wiki, did things like add the resume hook, remove the autodetect hook, pm-is-supported returns empty, and I can't see from the pm-suspend.log what the issue could be
Initial commandline parameters:
Fri Jun 15 12:19:28 EDT 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux dump9 3.4.2-3-ck #1 SMP PREEMPT Tue Jun 12 23:20:36 EDT 2012 x86_64 GNU/Linux
Module Size Used by
fuse 68256 3
dm_mod 70374 5
it87 28605 0
hwmon_vid 3164 1 it87
btusb 11604 0
bluetooth 187319 2 btusb
rfkill 15508 1 bluetooth
joydev 9895 0
usbhid 36046 0
hid 84805 1 usbhid
cx18_alsa 6389 1
mxl5005s 35031 1
s5h1409 9894 1
tuner_simple 13257 1
tuner_types 11121 1 tuner_simple
cs5345 2939 1
tda9887 8613 1
tda8290 12426 0
snd_hda_codec_hdmi 23640 4
tuner 16616 2
nvidia 12291043 30
nfs 274536 1
nfs_acl 2327 1 nfs
cx18 113932 1 cx18_alsa
lockd 62244 1 nfs
snd_hda_codec_via 37603 1
tveeprom 13777 1 cx18
i2c_algo_bit 5359 1 cx18
auth_rpcgss 32135 1 nfs
videobuf_vmalloc 4319 1 cx18
sunrpc 182965 8 nfs,auth_rpcgss,lockd,nfs_acl
fscache 40835 1 nfs
microcode 12281 0
firewire_ohci 31197 0
edac_mce_amd 12373 0
firewire_core 51008 1 firewire_ohci
powernow_k8 13360 1
edac_core 36624 0
mperf 1235 1 powernow_k8
videobuf_core 16007 2 cx18,videobuf_vmalloc
cx2341x 16956 1 cx18
dvb_core 94139 1 cx18
v4l2_common 5338 4 cx18,cx2341x,tuner,cs5345
videodev 92446 5 cx18,cx2341x,tuner,cs5345,v4l2_common
media 10117 1 videodev
snd_hda_intel 23765 5
snd_hda_codec 93089 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6204 1 snd_hda_codec
snd_pcm 74574 5 cx18_alsa,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7249 2 snd_pcm,snd_hda_intel
snd_timer 18774 1 snd_pcm
snd 58325 19 cx18_alsa,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec,snd_hda_intel
i2c_piix4 8224 0
soundcore 5378 1 snd
i2c_core 20241 14 cx18,tuner,i2c_piix4,tda8290,tda9887,i2c_algo_bit,cs5345,s5h1409,nvidia,v4l2_common,tveeprom,mxl5005s,tuner_simple,videodev
ohci_hcd 21400 0
ehci_hcd 40546 0
usbcore 146125 5 btusb,ohci_hcd,ehci_hcd,usbhid
usb_common 954 1 usbcore
k10temp 2915 0
r8169 48842 0
crc_itu_t 1363 1 firewire_core
mii 4059 1 r8169
ppdev 5806 0
parport_pc 30541 0
parport 31139 2 ppdev,parport_pc
processor 26567 1 powernow_k8
wmi 8411 0
sp5100_tco 4504 0
psmouse 70248 0
evdev 9722 26
serio_raw 4621 0
button 4502 0
hfsplus 78321 0
loop 18000 0
autofs4 23767 2
ext4 422063 4
jbd2 73535 1 ext4
mbcache 5977 1 ext4
crc16 1359 2 ext4,bluetooth
sr_mod 14663 0
sd_mod 29047 11
cdrom 35488 1 sr_mod
pata_acpi 3376 0
pata_atiixp 4000 5
ahci 20517 2
ata_generic 3295 0
libahci 19959 1 ahci
libata 165627 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
scsi_mod 132142 3 libata,sd_mod,sr_mod
total used free shared buffers cached
Mem: 8182220 2086832 6095388 0 65592 1007076
-/+ buffers/cache: 1014164 7168056
Swap: 2104476 0 2104476
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
Unloading kernel module ehci_hcd...Done.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Fri Jun 15 12:19:29 EDT 2012: performing suspend
Last edited by boast (2012-06-16 21:21:45)

ewaller wrote:I have no experience with nVidia controllers; sorry. Does anyone know if it is normal to skip the quirks for that display?
Yes, that's normal and should work.
Looking at the module list maybe try stopping the video4linux before suspend.
To double check: boast, you rebuilt the kernel, yes?

Ram not working after 2.8 firmware update

Installed the 2.8 firmware update on my late '08 macbook pro and after restarting it, it would just beep 3 times and not start up. I pulled my 8 gig kingston ram out, repositioned back and still the same issue. Slapping in the original 4 gigs of apple ram, it will start up and work fine though. Anyone else experiencing this? Is there a fix to get the 8 gigs working again on the machine?

That's the correct RAM for your computer. Those computers were originally spec'd to only use 4GB's max, a "secret" firmware update was found to let them use 8GB's max. I wonder if this firmware update set things back to 4GB's max. And before you ask, no you can't downgrade firmware.

K9N4 Ultra-F 2x 2gig ram not working?! (Resolved, indirectly)

So I can boot off one stick, either one works, but not both. With both sticks in the board the system wont even post.
Ram is OCZ OCZ2G8004GK DDR2 PC2-6400 800MHz
Other info:
CPU: AMD Athlon AM2 5200+
Video: Geforce 8800 GTS
PSU: Antec 450w Smart Power
I have not yet been able to flash the bios, as I cannot get the system to boot off the floppy drive either :(
No trouble booting off CD, so I will make a bootable CD if needed to flash the bios

Quote from: gtmattz on 08-June-07, 09:37:51
The only suggestion i have been given so far is to install an older 'beta' BIOS version, which made no difference. That was before the suggestions to disable spread spectrum etc. So I just re-flashed to the old version (btw how many times can i flash this bios lol?). then went in and set all the memory timing and freq, disabled spread spectrum etc. and it still does not post with 2 sticks of memory in. I am beginning to think that this motherboard was the wrong choice, as I was looking for a real nForce 500 chipset anyway and not a re-labled nForce4.
"The only suggestion i have been given so far is to install an older 'beta' BIOS version, which made no difference. "
which version exactly? the BIOS version which deserve attempt are those with NVMM changes, that means BIOS versions 1.3 & 1.4
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1083
if you got USB key, you can use our tools to flash your BIOS quick & safe:
https://forum-en.msi.com/index.php?topic=108079.0
"(btw how many times can i flash this bios lol?)"
depend of BIOS chip, but usually can do up to 10 000 times if im correct.(told you that for statistic only, each BIOS update is a risky..)
"then went in and set all the memory timing and freq, disabled spread spectrum etc. and it still does not post with 2 sticks of memory in. I am beginning to think that this motherboard was the wrong choice, as I was looking for a real nForce 500 chipset anyway and not a re-labled nForce4."
there is other reasons.. --> the memory used: if you switch and try another brand or another memory type its possible to be ok.(e.g. compatibility issue),
other thing you may have bad CPU, since memory controller is integrated in CPU... but can be bad DIMM slot too... PSU...(which Bas notice you before but as i can see you didn't tried his suggestion yet) or something else..

Upgrading MBP to 4GB RAM not working

I have a MacBook Pro "Core 2 Duo" 2.5 17" (08) (EMC 2199) which accordingly can be upgrade to 4GB RAM. The memory type required for the model is PC2-5300 DDR2. So I went and bought two 2GB PC2-6400 DDR2 modules. When I installed both 2GB for a total of 4GB, the MBP won't boot or make a sound. If I install one of the original 1GB + new 2GB for a total of 3GB, the MBP boots. I have swapped the modules around from slot to another slot. I have tested both 2GB modules with one of the original 1GB module and it will boot. But when I put in both 2GB PC-6400 DDR2, the computer will not boot. Anyone have a suggestion on what I should do? Thank you.

BlackFrog wrote:
I have a MacBook Pro "Core 2 Duo" 2.5 17" (08) (EMC 2199) which accordingly can be upgrade to 4GB RAM.
Incorrect. If you do indeed have the Macbook Pro Core 2 Duo 17" from early 2008, the maximum RAM it can hold is 3GB. Read the second table on http://support.apple.com/kb/ht1270#link5 (the table titled "+Refer to this table for the maximum+...").
Message was edited by: Ben Alt.

K9A2 CF Suspend to RAM not working?

Similar Messages

Maybe you are looking for