K9A2 Neo + AMD X2 6000+ performance problem

Hello!
I got this problem wich i wonder if it has to do with the chipset contra graphic card.
I used to have an AMD X2 3800+, ASUS A8N5X NFORCE4 mobo, 2gb PC3200 400mhz, and i exchange those for AMD X2 6000+, MSI K9A2 Neo, 2gb Corsair XMS2 800mhz. My graphics card is a NVIDIA GF8000GTS running under Win XP 32.
My problem comes down to that this new gear runs like my older. If not worse at times. And my friend that has an identical system can play on very high settings without any stutter while i have to play on normal. Exactlly as my older system. The difference we have is that he is using a NFORCE motherboard. Im now wondering if that has such an impact on performance? Having a NVIDIA graphics card and use this MSI with ATI chipset.
When i baught it today i asked for NFORCE but i guess he forgot after picking it up and handing it to me, and i ofcourse forgot to double check. I thaught it was NFORCE7 when i saw the "770" marking. I also installed some AMD CPU DRIVERS that came with the disc. Dont know what they are for. Never seen that before. I also skipped installing the "ATI SYSTEM DRIVERS" as i figured i dont use ATI graphics card. Dont know if i should?
I will exchange this for a NFORCE mobo, but i just wanted to check with you if this really can have such impact on performance.
I have everyhing else updated to latest drivers with XP SP3 up to date.
Hope for some answer. Thank you in advance.
Regards
Alex

My friend and i got the same gear apart from the nforce mobo.
I got a 500W PSU and it should do as antother friend of mine got 600W and running SLI and faster CPU, more RAM etc. When i installed this i ofcourse formatted and made a fresh install. Unless you mean that i need to install the ATI SYSTEM DRIVERS first? I dont know if its 30 AMPS on the PSU though. Need to check that.
To me it just sounds more sain to use Nvidia chipset together with Nvidia graphics card, and ATI chipset with ATI graphics. But as you say you got no performance probs with that i might be wrong. However i am comparing to a friend with the same gear and playing online at the same time. He can go way up in settings i cant. I even stutter on the normal settings, and he doesnt on the high settings.
Gotta check the 30AMPS now.
Thanks for your ideas. Your probably right. Will check.
Regards
Alex

Similar Messages

P43 Neo - PCI wireless LAN performance problems

Hi,
i recently installed the Neo P43 Board. Everything runs fine so far, except PCI wireless LAN (maybe more, it's the only PCI card I use). I already updated the BIOS to 1.6 but it doesnt fix it.
I tried 2 different WLAN cards (1 Realtek and 1 Ralink). Both of them basicly work, but the transfer rates are painfully slow although the connection quality is reported as good enough.
Anyone else having issues?

How low are the transfer rates?
It varies a bit but most of the time very low (as low as 1kbps or sometimes not working at all)
What are you connected to (Router?, What kind of Router)?
Connected to a router. It's a "Speedport" router, I think they are manufactured by Siemens.
When you talk about the transfer rate, do you mean the transfer rate that you get when you try to copy files to another system in a Wireless network?
I mean downloading files from the Internet over the router, or generally the connection to the router (like status page).
The Ralink card used to work just fine in my older PC with an Athlon XP / Nforce Chipset (and several other PCs), but on the Neo P43 makes problems with both, the Ralink and the Realtek card.
I'm not absolutely sure it is the board that makes these problems, but I can't think of any other source for this problem anymore.

Problem with K9A2 NEO-F board...resets after post

First time post here, sorry if this subject has already been went over. Upgrading my board, chip, RAM, and video card. Went with a dual core Windsor 2.8, 4 gig of Geil ddr2 800 ram, a MSI 8800GT video card and the K9A2 NEO-F board...the board sees the chip and counts up all the ram and finds the one SATA drive i installed. The post goes ok and windows starts to load and then a screen flashes too fast too read, and it resets back to the post again. The BIOS is the weird part. I go in to set the boot sequence, and all available bootable items are [bracketed] and any item selected is "disabled in the corresponding menu". It wont allow me to choose any bootable item; the floppy, the cdrom or the hard drive. Anyway, i have no idea why this board wont boot to my winxp drive from my old config computer. Any ideas anyone please?

??? HUH?
You can't do that! Read this carefully: you can NOT use one installation on another computer. Nor can you swap boards/cpu in an existing machine and expect Windows to work. If you want the OS to run, install the hardware you want and install Windows on the machine you want it to run on. Installing Windows using an old "bare" PC and then put that HDD into another machine will NOT work.
Now, please do a fresh Windows install on the PC you want it on. I cannot explain it more clearly...

No sata on MSI K9A2 Neo-f

I have this mobo: http://www.msi.com/product/mb/K9A2-Neo-F.html#/?div=Overview and I'm facing a problem that mine mobo can not detect the sata HD. This HD is from a older but still working AM2 system and is still containing the Old OS. I know in the past this should not be any issue because I'm going to reinstall a new OS.
I did change SATA ports/ exchanged SATA cable, BIOS in default settings/ Bios in safe settings/ disconnect the PATA DVD, but still not SATA detected.
I even used a PATA HD and that was detected.
I'm running this system on DVD in PATA and trying to get the HD working on SATA.
What is wrong here and how to test if the sata ports on the mobo are gone.
Should I avoid SATA/PATA combinations and go for all SATA???

I have build many PCs so I have lots of old componets, I did run:
old HD & old DVD in parallel cable http://en.wikipedia.org/wiki/Parallel_ATA
new HD & new DVD in serial cable http://en.wikipedia.org/wiki/Serial_ATA
old DVD in parallel & new HD in serial cable
But you can close this thopic mobo was nok , did get a new FM1socket mobo & A8-3870k CPU & 8GB RAM. Seller will get the cost back to my paypal account .
My DDR2 & AMD 64 X2 6400+ will get a new live in the 790Gx MSImobo from my parrents, rest is needed on the new rig.

Performance problems when using Premiere Elements for photo slideshows

Hello,
I had been using Premiere Elements 9 (PE9) to make a simple slideshow for my parents from their vacation trip and I ran into some serious performance problems. I had used it to create similar projects before, but not nearly as big. This one is like 260 photos, so basically it is 260 seperate clips. I have a POWERHOUSE workstation (see below) so it isn't my PC. Even when PE9 crashes, looking at my performance monitor my CPU and RAM aren't even halfway being utilized. I finally switched to Windows Movie Maker of all things and it worked seemlessly, amazing really. I'm wondering if I was just using PE9 for something other than what it was designed for since there weren't really any video clips, just a ton of photos that I made into video clips, if that makes sense. Based upon my experience with this so far, I can't imagine using PE9 anymore for anything really. I might have the need for a more professional video editing program in the near future, although it does seem like PE has a lot of features. How can I make sure it utilizes my workstation to its full potential? Here are my specs:
PC
Intel Core i7-2600K 4.6 GHz Overclocked
ASUS P8P67 Deluxe Motherboard
AMD Firepro V8800 Video Card
Crucial 128 GB SATA 6Gb/s Solid State Drive (Operating System)
Corsair Vengeance 16GB (4x4GB) Memory
Corsair H60 Liquid CPU Cooler
Corsair Professional Series Gold AX850 Power Supply
Graphite Series 600T Mid-Tower Case
Western Digital Caviar Black 1 TB SATA III Hard Drive
Western Digital Caviar Black 2 TB SATA III Hard Drive
Western Digital Green 3 TB SATA III Hard Drive
Logitech Wireless Gaming Mouse G700
I don’t play any games but it’s a great productivity mouse with 13 customizable buttons
Wacom Intuos5 Pen Tablet
Yes, this system is blazingly fast. I have yet to feel it slow down, even with Photoshop, Lightroom, InDesign, Illustrator and numerous other apps running at the same time. HOWEVER, Premiere Elements 9 has crashed NUMERUOS times, every time my system wasn't even close to being fully taxed.
Monitors – All run on the ATI V8800
Dell Ultra Sharp 30 inch
Samsung 27 Inch
HAANS-G 28 Inch
Herman Miller Embody Ergonomic Chair (one of my favorite items)

Andy,
There ARE some differences between PrE and PrPro w/ an approved CUDA-capable and MPE hardware acceleration-enabled nVidia video card, but those differences show up ONLY in the quality of the Scaling. The processing overhead is almost exactly the same, when it comes to handling the extra pixels.
As of PrPro CS 5, two things changed:
The max. size of Still Images went up from 4096 x 4096 pixels, to quite a bit larger (cannot recall the numbers now).
The Scaling algorithms have been improved, though ONLY with the correct nVidia cards, with MPE hardware support enabled.
Now, there CAN be another consideration, between the two programs, in that PrPro CS 5 - CS 6, are 64-bit ONLY, so one benefits from the computer and OS to run it. PrE can be either 32-bit, or 64-bit, so one might, or might not, be taking advantage of the 64-bit program and OS. Still, the processing overhead will be almost identical, it's just that the 64-bit OS can spread it around a bit.
I still recommend Scaling the large Still Images in PS, prior to Import, to keep that processing overhead as low as is possible. Scaled Still Images work just fine, and I have one Project with 3000+ Scaled Still Images, that edits just fine in PrPro, even on my older 32-bit workstation. Testing that same machine, and PrPro some years ago, I could ONLY work with up to 5 - 4096 x 4096 Stills, before things ground to a crawl.
Now, Adobe AfterEffects handles large Still Images differently, so I just moved that test Project to AE, and added another 20 large Images, which edited just fine. IIRC, AE can handle Still Images up to 10K x 10K pixels, and that might have gone up, as of CS 5.
Good luck, and hope that helps,
Hunt

Performance Problems with intrinsic array multiplikation in Fortran with Su

Hello,
I found a serious performance problem in my application with intrinsic array multiplikation. Therefore I wrote a small test program to check if this a general problem or only exists in my code.
The test program (as seen below) was compiled with Sunstudio12 und Solaris 5.10 on an 64 bit Amd Opteron Machine. First with high optimization (f95 -fast -g), and the second time with out optimization (f95 -O0 -g). In both cases the intrinsic array mupltiplication had a lot of tlb and L2 cache misses (I made some test with the performance analyzer) which caused a huge increase in computation time compared to the explicit loop. In the ideal case the compiler should create the nested loops from the intrinsic statement and both functions should use exactly the same computing time.
I also tried compiling with Studio11, the problem also occurs there. Maybe its a compiler bug but I'm not sure.
Greetings
Michael Kroeger
program test
!Test zur Ausfuehrung einer einfachen array Multiplikation
implicit none
real,dimension(:,:,:),pointer::check1,check2
integer i,j,k,ni,nj,nk,status
ni=1000
nj=1000
nk=100
allocate(check1(0:ni,0:nj,0:nk),STAT=status)
write(*,*)status
allocate(check2(0:ni,0:nj,0:nk),STAT=status)
write(*,*)status
check1(i,j,k)=25
check2(i,j,k)=25
call intrinsic_f(check1)
call withloop(check2,i,j,k)
deallocate(check1,check2)
contains
subroutine intrinsic_f(check1)
real, dimension(:,:,:),pointer::check1
check1=check1*5
end subroutine intrinsic_f
subroutine withloop(check2,ni,nj,nk)
real, dimension(:,:,:),pointer::check2
integer i,j,k,nk,nj,ni
do k=0,nk
do j=0,nj
do i=0,ni
check2(i,j,k)=check2(i,j,k)*5
enddo
enddo
enddo
end subroutine withloop
end program

I will try the large pages, but what me puzzles is, that the intrinsic function has cache misses, but the loop function has not. All documentation says, that the compiler would expand the intrinsic function into 3 nested loops, so that both functions should be essential the same (and the compiler says it has created 3 loops from the intrinsic). Since they are not the same, this is a severe problem.
I have a fairly large code for high performance simulations, and this intrinsic functions are a significant bottle neck. If it is not a compiler bug, I would have to rewrite all intrinsic functions into loops.

ITunes performance problems CPU specific?

one question to anyone who is experiencing performance problems and playback problems still with version 7.0.2. I discussed the situation with a view friends and found out, that there are some still having all these problems with performance and playback quality and some that have them not. So i had the following idea: Could it be, that all these people, who use the iTunes for Windows on machines with AMD CPUs have problems and those who use it on INTEL CPUs haven't?
Please give some Feedback to me and most important: to Apple.
If so, please Apple fix it soon.

I'm using a Sony desktop PC with an Intel processor, and have had numerous problems with the performance of the latest version(s) of iTunes (7.0 and 7.0.2).

Severe performance problem

Hi,
We have developed a e-commerce application using weblogic 4.5.1. We use
jdk1.2.2 and have installed service pack 7.
We use a progress database with a jdbc driver provided by Merant.
This jdbc driver doesn't support connection pooling so we get the connection
each time we need it.
We developed some servlets and jsp pages, also compiled using jdk1.2.2.
The problem we have is that there is one query that when we execute it,
results in a time out error after 3 minutes. The keepalivesecs are set to
more than 6000 secs. It is according to me not a problem of neither the
database nor the jdbc driver, since I tested the same code without using
weblogic and the servlet. Then the query performs fine. After 10 secs I get
the disered result.(run on a client machine).
I have looked at the performance tuning document but there is not much
information about how to handle this. Even if there is only 1 (one) user
connected performance is terrible.
Kind regards,
Patrick

Hi,
We have a similiar setup and also have performance problems.
We are using Weblogic 4.5.1 towards a Sybase database.
We are using JSP (pages) and it doesn't seem to be the actual
application that needs tuning(?). It more looks like it is some
weserver/application server setup somewhere.
The site is at http://www.awardit.se (it's in swedish though).
Any ideas/solutions?
Best Regards
Kenneth Ljunggren
"Patrick Vanbrabant" <[email protected]> skrev i meddelandet
news:8a8kmb$jso$[email protected]..
Hi,
We have developed a e-commerce application using weblogic 4.5.1. We use
jdk1.2.2 and have installed service pack 7.
We use a progress database with a jdbc driver provided by Merant.
This jdbc driver doesn't support connection pooling so we get theconnection
each time we need it.
We developed some servlets and jsp pages, also compiled using jdk1.2.2.
The problem we have is that there is one query that when we execute it,
results in a time out error after 3 minutes. The keepalivesecs are set to
more than 6000 secs. It is according to me not a problem of neither the
database nor the jdbc driver, since I tested the same code without using
weblogic and the servlet. Then the query performs fine. After 10 secs Iget
the disered result.(run on a client machine).
I have looked at the performance tuning document but there is not much
information about how to handle this. Even if there is only 1 (one) user
connected performance is terrible.
Kind regards,
Patrick

Performance problems on non-Intel CPU's

Hello,
Recently I have been looking into tracking down a performance problem with Adobe Flash on a couple of different Linux platforms. I understand that there is limited hardware acceleration and that is actually important for my question. On multiple netbooks I tested similar Flash based content and found that content my EeePC 701 with a 600Mhz Intel Celeron could play, a netbook with a VIA processor running at 1Ghz couldn't even come close to playing. Running sysprof I see that 80+% of the time is spent within the libflashplayer library.
To my point, which you may or may not want to answer. Is it possible that Adobe uses Intel's compiler to produce their binaries? I only ask this because it has been documented that Intel's compiler explicitely disables certain optimizations for non-GenuineIntel processors, http://www.theinquirer.net/inquirer/news/1567108/intel-compiler-cripples-code-amd-via-chip s
. I have also examined the codepaths and see that libflashplayer.so does check /proc/cpuinfo for the vendor_id string in it's initialization logic.
I don't want to start conspiracy theories, but if any of this is valid at all, could it please be fixed? Thanks.

http://www.apple.com/support/bootcamp/
Only Intel when talking Macs, no PowerMacs or G4 etc.

K9A2 Neo eight beeps, no video output

Hello,
When booting my K9A2 Neo (under the sticker saying that it says K9A2 CF), I get the following beeps if the graphics card is either connected or disconnected.
One double beep, eight beeps, one beep.
Beep-beep. Beep, beep, beep, beep, beep, beep, beep, beep. Beep.
MP3 Audio of the beeps: f.qubodup.net/mbbeeps.mp3
I disconnected all cables (IDE, SATA, USB), switched memory (I get three long beeps if I remove all memory), switched power supply. The graphics card works when used on another board.
I'm not sure what the code(s?) might mean. I found a list of Beep codes for AMIBIOS (American Megatrends, Inc.) at forum-en.msi.com/index.php?topic=113998.msg854207#msg854207
Probably the middle part means "8 ; Display memory error (system video adapter)".
Has anybody have had these kind of beep codes (with this mainboard) and was able to rescue their system/mainboard (I assume it's the motherboard failing but I'm not quite sure, as I have never experienced mainboard failure before).

Thanks for the replies,
Board: MSI K9A2 Neo
Bios: Not sure (can't get visual, don't remember if/when last updated, assuming AMI BIOS 7388v1D)
VGA: ASUS EN7500LE HTD P 128M FSC SI
PSU: Techsolo GTP-680 (21A 12V rail)
CPU: AMD Phenom X4 9550, 95W
MEM: 2x EXME02G-DD2N-800D50-F1 2GB DDR2-800 CL5
HDD: Disconnected
COOLER: Alpine Pro 64
OC: None
OS: N/A (Usually Arch Linux 64bit)
Quote
I have tried:
Took board out of computer for testing. Disconnected everything superfluous.
Tested PSU with another machine (MSI MS-7293 Ver 2.0). Works fine.
Tested VGA with another machine (MSI MS-7293 Ver 2.0). Works fine.
Tested different PSU (FSP350-60HLC, 15A 12V rail).
Tried using only one of both the RAM.
Tried RAM from MSI MS-7293 Ver 2.0 (2x Samsung 512MB 1Rx8 PC2 - 4200U - 444 - 12 - ZZ CD5).
Reseated the CPU.
flobelix: why should I forget about the beep codes? Unreliable?
I have another graphics card ( PowerColor SCS3 AX5750 1GBD5-S3DH Radeon HD 5750 1GB 128-bit GDDR5 PCI Express 2.1 x16 ). If I stick it in the K9A2 Neo, nothing happens: no image on screen, no beeps. Very strange. In the MS-7293 Ver 2.0, it leads to one long beep that gets repeated.
I don't have another AM2+ board.

PL/SQL Performance problem

I am facing a performance problem with my current application (PL/SQL packaged procedure)
My application takes data from 4 temporary tables, does a lot of validation and
puts them into permanent tables.(updates if present else inserts)
One of the temporary tables is parent table and can have 0 or more rows in
the other tables.
I have analyzed all my tables and indexes and checked all my SQLs
They all seem to be using the indexes correctly.
There are 1.6 million records combined in all 4 tables.
I am using Oracle 8i.
How do I determine what is causing the problem and which part is taking time.
Please help.
The skeleton of the code which we have written looks like this
MAIN LOOP ( 255308 records)-- Parent temporary table
-----lots of validation-----
update permanent_table1
if sql%rowcount = 0 then
insert into permanent_table1
Loop2 (0-5 records)-- child temporary table1
-----lots of validation-----
update permanent_table2
if sql%rowcount = 0 then
insert into permanent_table2
end loop2
Loop3 (0-5 records)-- child temporary table2
-----lots of validation-----
update permanent_table3
if sql%rowcount = 0 then
insert into permanent_table3
end loop3
Loop4 (0-5 records)-- child temporary table3
-----lots of validation-----
update permanent_table4
if sql%rowcount = 0 then
insert into permanent_table4
end loop4
-- COMMIT after every 3000 records
END MAIN LOOP
Thanks
Ashwin N.

Do this intead of ditching the PL/SQL.
DECLARE
TYPE NumTab IS TABLE OF NUMBER(4) INDEX BY BINARY_INTEGER;
TYPE NameTab IS TABLE OF CHAR(15) INDEX BY BINARY_INTEGER;
pnums NumTab;
pnames NameTab;
t1 NUMBER(5);
t2 NUMBER(5);
t3 NUMBER(5);
BEGIN
FOR j IN 1..5000 LOOP -- load index-by tables
pnums(j) := j;
pnames(j) := 'Part No. ' || TO_CHAR(j);
END LOOP;
t1 := dbms_utility.get_time;
FOR i IN 1..5000 LOOP -- use FOR loop
INSERT INTO parts VALUES (pnums(i), pnames(i));
END LOOP;
t2 := dbms_utility.get_time;
FORALL i IN 1..5000 -- use FORALL statement
INSERT INTO parts VALUES (pnums(i), pnames(i));
get_time(t3);
dbms_output.put_line('Execution Time (secs)');
dbms_output.put_line('---------------------');
dbms_output.put_line('FOR loop: ' || TO_CHAR(t2 - t1));
dbms_output.put_line('FORALL: ' || TO_CHAR(t3 - t2));
END;
Try this link, http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm#23723

Performance problem in Zstick report...

Hi Experts,
I am facing performance problem in Custoom Stock report of Material Management.
In this report i am fetching all the materials with its batches to get the desired output, at a time this report executes 36,000 plus unique combination of material and batch.
This report takes around 30 mins to execute. And this report is to be viewed regularly in every 2 hours.
To read the batch characteristics value I am using FM -> '/SAPMP/CE1_BATCH_GET_DETAIL'
Is there any way out to increase the performance of this report, the output of the report is in ALV.
May i have any refresh button in the report so that data may get refreshed automatically without executing it again. or is there any cache memory concept.
Note: I have declared all the itabs with type sorted, all the select queries are fetched with key and index.
Thanks
Rohit Gharwar

Hello,
SE30 is old. Switch on trace on ST12 while running this progarm and identify where exactly most of the time is being spent. If you see high CPU time this problem with the ABAP code. You can exactly figure out the program/function module from ST12 trace where exactly time is being spent. If you see high database time in ST12, problem is with database related issue. So basically you have to analyze sql statement from performance traces in ST12. These could resolve your issue.
Yours Sincerely
Dileep

SQL report performance problem

I have a SQL classic report in Apex 4.0.2 and database 11.2.0.2.0 with a performance problem.
The report is based on a PL/SQL function returning a query. The query is based on a view and pl/sql functions. The Apex parsing schema has select grant on the view only, not the underlying objects.
The generated query runs in 1-2 sec in sqlplus (logged in as the Apex parsing schema user), but takes many minutes in Apex. I have found, by monitoring the database sessions via TOAD, that the explain plan in the Apex and sqlplus sessions are very different.
The summary:
In sqlplus SELECT STATEMENT ALL_ROWS Cost: 3,695
In Apex SELECT STATEMENT ALL_ROWS Cost: 3,108,551
What could be the cause of this?
I found a blog and Metalink note about different explain plans for different users. They suggested to set optimizer_secure_view_merging='FALSE', but that didn't help.

Hmmm, it runs fast again in SQL Workshop. I didn't expect that, because both the application and SQL Workshop use SYS.DBMS_SYS_SQL to parse the query.
Only the explain plan doesn't show anything.
To add: I changed the report source to the query the pl/sql function would generate, so the selects are the same in SQL Workshop and in the application. Still in the application it's horribly slow.
So, Apex does do something different in the application compared to SQL Workshop.
Edited by: InoL on Aug 5, 2011 4:50 PM

Performance problem with WPF Viewer CRVS2010

Hi,
We are using Crystal Reports 2010 and the new WPF Viewer. Last week when we set up a test machine to run our integration tests (several hundred) all report tests failed (about 30 tests) with a timeout exception.
The testmachine setup:
HP DL 580 G5
WMWare ESXi 4.0
Guest OS: Windows 7 Enterprise 64-bit
Memory (guest OS): 3GB
CPU: 1
Visual Studio 2010
Crystal Reports for Visual Studio 2010 with 64 bit runtime installed
Visual Studio 2008 installed
Microsoft Office 2010 installed
Macafee antivirus
There are about 10 other virtual machines on the same HW.
I think the performance problem is related to text obejcts on a report document viewed in a WPF Viewer. I made a simple WPF GUI with 2 buttons and the first button executes a very simple report that only has a text object with a few words in it and the other button is also a simple report with only 1 text object with approx. 100 words (about 800 charchters).
The first report executes and displays almost instantly and the second report executes instantantly but displays after approx. 1 min 30 sec.
And execute in this context means that all VB.Net code runs in the compiler without any exception or performance problem. The performance problem seems to come after viewer.Show() (in the code below) has executed.
I did another test on the second report and replaced the text obejct with a formula field with the same text as the text object and this test executed and displayed the report instantly.
So the performance problem seems to have something to do with rendering of textobjects in the WPF Viewer on a virtual machine with the above setup.
I've made several tests on local machines with Windows XP (32 bit) or Winows 7 (64 bit) installed and none of them have this performance problem. Its not a critical issue for us because our users will run this application on their local PCs with Windows 7 64-bit but its a bit problematic for our project not being able to run all of our integration tests but I will probably solve this by using a local PC instead.
Here is the VB.Net code Im using to View the reports:
Private Sub LightWeight_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
        Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeight.rpt")
        ' Initialize Viewer
        Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
        viewer.Owner = Me
        viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
        viewer.Show()
    End Sub
    Private Sub LightWeightSlow_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
        Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeightSlow.rpt")
        ' Initialize Viewer
        Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
        viewer.Owner = Me
        viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
        viewer.Show()
    End Sub
The reports are 2 empty default reports with only 1 textobject on the details section.
// Thomas

See if the KB [
[1448013 - Connecting to Oracle database. Error; Failed to load database information|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433343338333033313333%7D.do] helps.
Also the following may not hurt to have a look at (if only for ideas):
[1217021 - Err Msg: "Unable to connect invalid log on parameters" using Oracle in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033323331%7D.do]
[1471508 - Logon error when connecting to Oracle database in a VS .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373331333533303338%7D.do]
[1196712 - Error: "Failed to load the oci.dll" in ASP.NET application against an Oracle database|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393336333733313332%7D.do]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

JRC 2: Performance Problem

Hi.
Our reporting component used JRC 1.x before we upgraded to JRC 2.x. We got two issues after upgrading.
First issue I solved already with a workaround which I published on stackoverflow.com. (1) Does anyone knows where I will find the issue management system to report this issue?
Second issue occurs big performance problem within our project. We opened a report with 6 subreports (which includes 1 upto 3 tables) in 2-4 seconds using JRC 1. If we will open same report using JRC 2, we wait upto 60 seconds.
This methods requires more time with JRC 2 comparing to JRC 1:
ReportClientDocument#open(String, int);
SubreportController#setTableLocation(String, ITable, ITable)
DatabaseController#setTableLocation(ITable, ITable)
Each invocation of one of these methods requires 2-4 seconds.
Thank you in advance.
Best regards
Thomas
(1) http://stackoverflow.com/questions/479405/replace-a-database-connection-for-subreports-with-jrc

hello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
     try {
          String reportName = "report.rpt";
          ReportClientDocument clientDoc = new ReportClientDocument();
          clientDoc.open(reportName, 0);
          String tableAlias = "Command";
          clientDoc.getDatabaseController().setDataSource(myResult("SELECT * FROM table"), tableAlias,tableAlias);
          CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
          crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
          crystalReportPageViewer.processHttpRequest(request, response, application, null);
     } catch (ReportSDKExceptionBase e) {
          e.printStackTrace();
         out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4---- Error code:-2147467259 Error code name:failed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
     at org.apache.jsp.No_005f1.Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp._jspService(Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp.java:106)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.common.QueryEngineException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4
     at com.crystaldecisions.reports.queryengine.Connection.bf(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Rowset.z3(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Rowset.bL(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Rowset.zM(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.a(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.if(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.try(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.u7(Unknown Source)
     at com.crystaldecisions.reports.datafoundation.DataFoundation.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(Unknown Source)
     at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
     at com.crystaldecisions.reports.common.Document.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(Unknown Source)
     at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
     at com.crystaldecisions.reports.common.Document.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.f.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
     ... 39 more
Please help me and tell me why....

K9A2 Neo + AMD X2 6000+ performance problem

Similar Messages

Maybe you are looking for