K9A2 Platinum: No wake-up from S3 Standby

Hi All,
This is my first post, so please be gentle.
I have seen a few posts with issues similar to mine, but the solutions offered were of no help to me. So I'm hoping to pick your brains a little bit more. It's an annoyance more than anything, but an annoyance nonetheless.
My system goes to sleep just fine, everything powers down. But upon the wake command, the power lights come on, the fans spin up, the CD drive light flashes, the hard disks sound like they're initializing, yet the monitor remains off and the hard disk activity LED remains off. I have to literally pull the computer's power cord out to reset the machine since the buttons on the case cease to work. Normal shut-downs don't cause this.
All drivers are up to date and the issue persists with bios 1.3 and 1.4. Any help y'all can give would be greatly appreciated!
System Specs
MB
K9A2 Platinum v1.0, Bios 1.2
Suspend set to S3, wake by keyboard, mouse, or USB
CPU
AMD Athlon 64 X2 Dual Core +5400
Memory
4 GB Patriot PC6400 Dual channel (2 x 2 GB)
Storage
Primary:
RAID 0 (2 x 160 GB)
Secondary:
RAID 1 (2 x 300 GB)
Promise T3 disabled
Video
2 x Diamond HD3870 (Crossfire using the two 16X slots)
PSU
630W
OS
Windows XP Professional 32 bit

Quote from: mrjaype on 14-May-08, 16:34:27
Hi All,
This is my first post, so please be gentle.
I have seen a few posts with issues similar to mine, but the solutions offered were of no help to me. So I'm hoping to pick your brains a little bit more. It's an annoyance more than anything, but an annoyance nonetheless.
My system goes to sleep just fine, everything powers down. But upon the wake command, the power lights come on, the fans spin up, the CD drive light flashes, the hard disks sound like they're initializing, yet the monitor remains off and the hard disk activity LED remains off. I have to literally pull the computer's power cord out to reset the machine since the buttons on the case cease to work. Normal shut-downs don't cause this.
All drivers are up to date and the issue persists with bios 1.3 and 1.4. Any help y'all can give would be greatly appreciated!
System Specs
MB
K9A2 Platinum v1.0, Bios 1.2
Suspend set to S3, wake by keyboard, mouse, or USB
CPU
AMD Athlon 64 X2 Dual Core +5400
Memory
4 GB Patriot PC6400 Dual channel (2 x 2 GB)
Storage
Primary:
RAID 0 (2 x 160 GB)
Secondary:
RAID 1 (2 x 300 GB)
Promise T3 disabled
Video
2 x Diamond HD3870 (Crossfire using the two 16X slots)
PSU
630W
OS
Windows XP Professional 32 bit
There is a known is with S3 resume from what I have gathered from the German MSI forums. there are some beta bios that claims to fix the issue.
Beta 1.54
Fixed the 6.0.3 BTS fail bit after S3.
Fixed the system will hang 24H after resume from S3 when NV-6600 VGA card.
here is the link to the thread but its in German.
http://msi-forum.de/thread.php?threadid=35629&threadview=0&hilight=&hilightuser=0&page=29

Similar Messages

IPhone 5 won't wake up from sleep/standby!!

Hello, I am having a really strange problem with my iphone 5 for last 3-4 months. Sometime when i want to use my iphone from standby/sleep mode it dosent do anything! sleep/wake button, home button even silent/sound button dosent work. I know the silent/sound button dosen't work cause normally it vibrate when I turn it on. So the problem is my phone wont wake up from sleep/standby mode. The screen stays black and nothing works. If i press the home button and power button for 10-15 time very quickly, then it takes a screen shot and wakes up!! Sometime it stays in this stage for 5-10min.
So here is what i did to solve the problem.
1. I restore the phone from phone and ituens.
2. I delete all icloud backup and started as a new phone
3. I went to apple store and replace the phone with a new one!!
4. I jailbreak it at last to see if it solve the problem!
5. turn off the icloud to see if it works
And sadly nothing of all this solved my problem! Now im not sure any specific app causing the problem but it almost impossible to find it out. So if anyone have any similar problem or any suggestion to solve it, then it will be really helpful.

Hi All,
I hope I don't jinx it by posting this. Yesterday I changed two of my settings and the issue has not occured again.
I changed the carriers settings and the LTE settings.
I went into "Settings" - then went into "Carrier" - Then I switched the "Automatic" to "OFF" I waited for the the carrier to show up (in my case Vodafone), then selected "vodafone au" manually.
Then I went into "Settings" - Then went into "General" - then I switched OFF the "Enable LTE" option (In my case I have switched this option OFF as I have not been sent the message to advise that I now have 4G service. According to Vodafone support, Not all vodafone customers have 4G only a selected 40 thousand customers accross Australia, I think all customers will have 4G around mid July )
Once this is done, I switched the phone off, Waited around a minute and then switched the phone back on.
I will update in a week if the problem doesn't happen.

K9A2 Platinum-Won't boot from optical drives

My problem is that I can't get my computer to boot from either optical drive.Both drives work; I can read and write from either drive in windows xp. In the boot order menu neither drive is shown as a boot from device.The boot sequence menu shows all hdd and usb devices but no optical drives.Both drives are recognized in the bios.I wanted to dual boot vista x64 but can't because it won't boot from drive.Any ideas?
QuadCore AMD Phenom Black Edition 9850, 2500 MHz (12.5 x 200) MSI K9A2 Platinum (MS-7376) OCZ Reaper HPC OCZ2RPR10662G 2 GB DDR2-800 DDR2 SDRAM ATI Radeon X1800 GTO (256 MB) WDC WD2500KS-00MJB0 (232 GB, IDE)WDC WD5000AAKS-00A7B0 (465 GB, IDE) Microsoft Windows xp SP 3 Cooler Master 650W+3.3V@28A,+5V@30A,+12V1@18A,+12V2@18A,[email protected], [email protected]

Create a signature with PC components and PSU specs.
Example of PSU specs: Corsair VX450W, +3.3V~20A, +5V~20A, +12V~33A
To create signature:
Click on PROFILE above (near top of this page) and then in your "Profile", what I show in red below under "Modify Profile", scroll down to "Signature" and enter your specs in the box and then click on "Change profile" button on the bottom.
Profile Info
Summary
Show Stats
Show Posts
Modify Profile
Account Related Settings
Forum Profile Information
Look and Layout Preferences
Notifications and Email
Personal Message Options

Found: Intel Turbo Memory causing T61 wake-up from sleep / standby problems

This is related to my earlier post, but I've found a new cause and thought to post a new message to make it easier for others to find it if they are running into similar problems.
My system
T61 model 7662-CTO (built July 2007)
Vista Business w/ SP1
Nvidia Quadro NVS 140M (driver version: 7.15.11.7597)
Intel Turbo Memory (driver version: 1.7.0.1029)
Intel Wireless card 4965AGN (driver version: 11.5.0.36)
Thinkpad BIOS (version 7LETC4WW, 2.24)
no card reader or integrated webcam
I was having problems with Vista failing to wake-up after being put into sleep (or standby) mode. Instead of returning to the desktop, the system immediately crashes and reboots. After many hours, I reformatted the drive and re-installed Vista (business edition). Before running the Lenovo system update, I installed Vista Service Pack 1, then I ran Windows Update and installed any remaining update hotfixes. (I never delayed restarting the machine when prompted)
I incrementally began installing Lenovo drivers, and after the Power Management driver determined that hibernate was working.
The 'sleep' option was unavailable until I installed the Nvidia Quadro NVS 140M drivers. Then sleep worked!
Note: Intel Turbo Memory driver was uninstalled at this time.
After all other lenovo programs were installed, I installed the driver for the Intel Turbo Memory. I put the computer to sleep, and it crashed/rebooted upon being woken up.
I uninstalled the Turbo Memory driver from the Device Manager, and normal sleep -> wakeup function resumed.
Because the sleep / standby feature requires the Nvidia Quadro drivers, and the Vista OS and the Intel Turbo Memory must properly work together for the turbo memory to work, I imagine the failure involves some driver mismatch between these three. I cannot recall now whether this issue was present when I first received the machine over a year ago (pre-installed Vista Ultimate, service pack 1 not even out yet). Perhaps Vista SP1 made some change that the Turbo Memory driver doesn't like, particularly with the Nvidia Quadro drivers in the mix too.
Just FYI for anyone interested or curious.

Remove the two aftermarket memory modules and observe the results.

V560 cannot wake up from sleep/standby

hi all,
My V560 is not waking up after entering sleep/stand by mode automatically. screen remains black. usb is not working. hdd indicator light is on.
i have to press power button long till force it to power off. i am using win 7 enterprise 32bit.

hey azad,
place your unit on diagnostic mode via msconfig. restart your unit, login and do not launch any program.
if you have set your unit to go into sleep/standby after a period of time; let it do so.
once it is in sleep/standby , leave if for about 5 mins before "waking" it up.
can it wake up ? if yes, then it is a program you launch or a non-windows item that is launch in the background during startup that is causing the error.
if possible, go to >>http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=607595
and update your unit accordingly.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Satellite A300-1NO - Wakes up from standby mode

Hi all!
I have got a Satellite A300-1NO with Win XP pro.
The problem is, that the laptop wakes up from standby mode automatically after about 5 minutes.
I tried to unplug all cables (LAN, usb, etc) but the power plug, but it's the same result.
So what can cause this? What should I try?
thanks.

You should disable the Wake up on LAN function in BIOS and Windows.
Check the BIOS for this option!
You can disable this feature in Windows if you right click on the network card > properties > advanced > wake on LAN
I hope it works for you.

Satellite L850-13R wakes up from standby with no reason

My L850 wakes up from standby every 10-20 minutes and after some time goes to standby again.
All power options are set as they should be (that means no wake on battery and even no wake up on power).
Problem is that this is my business notebook and I moves around with me so I could expect HD errors, not to mention battery life (I found it with dead battery this morning).
I have the latest firmware available (1.60)...
Anybody else facing this problem ?

In case anybody has similar problems one of the solutions could be:
IN registry look for
HKLM\System\CurrentControlSet\Control\CrashControl \DumpFilters
where you'll find a list of drivers that can possibly prevent standby (dumpfve.sys seems to always be there so don't touch it).
For other drivers remove the programs that installed them (I had MfeEpeHb.sys) or
do something not recommended and remove the lines with drivers you're suspecting prevent successful hibernation).
Eg. modify DumpFilters from
[DumpFilters]
MfeEpeHb.sys
dumpfve.sys
to:
[DumpFilters]
dumpfve.sys
That did the trick for me.
Hibernation tested and works without any problem

Mac Mini wakes up from standby automatically

Hi,
My Mac Mini wakes up from standby automatically. Waking up via network is disabled and I use an Airport Extreme, a USB mouse (not from Apple) and a wireless Apple keyboard. OS X version is 10.5.8.
I have the Mac Mini since about 10 months now. Almost 1 month after I bought it, I had the this problem but thought I am doing something wrong or my wife has forgotten to turn it off
After a while it was OK. About 3 months later it startet waking up by itself again. I called Apple Care (although the 3 months support was over). They tried to help, but there was no progress. It waked up again and again. After about 1 month it was OK again without me having done anything, no installations, no system updates.
One week ago, the Mac found some updates at Apple and installed them. Since then I have again the problem! I contacted again Apple Care and again they could not help. They just want me to pay for an extension of the Apple Care package, although they could not help me in this case!
Now I want to try it myself getting support by people in this forum. I hope there is someone with experience about this case.
I am not much experienced with OS X, but I will try to answer questions that could help me resolve this problem.
BTW, I searched for a similar topic and found one ("My MacMini always wakes up from standby") but in that case the wake up feature is activated by the user. In my case this feature is deactivated, as mentioned above.
Thanks
Cheers
Quartz84

Hi,
sorry for the delay, but I was on a business trip.
@Bsteely: Sometimes it wakes up immediately because of loosing connection to the keaboard when I send it to sleep. I suppose at the beginning of the sleep mode it into sleep mode, the keaboard connection is closed, then the keyboard "thinks" there is a problem and sends a message to the mini and the mini just wakes up again showing that the connection to the keyboard was lost but established again! This even happened as I had unselected the checkbox "Allow Bluetooth devices to wake up this computer" in Preferences -> Bluetooth -> Advanced.
But there are also times when the mini does not wake up so quickly. It just wakes up after hours. I had a look at Console.app as you suggested. Very weird to me indeed Well there I found something like "Wake reason = OHC2" or "Wake reason = OHC1". Unfortunately I cannot find older logs there.
@Boece: Hi and thanks for helping!
Well, I will try the update as soon as I can. By now I have no external harddisk to first save my data before doing the big update. But I am going to buy one soon.
Well turning off the monitor is OK, but the harddisk can wake up anytime while the mini is turned on as the OS might need to do something from time to time. And I don't want my computer to consume electricity even if it is such a small one like the mini. I'm a kind of green dude (but not from Mars ). And the sleep mode is interesting for me as I have very often many different Internet sites and some applications running, so I don't need to close them before turning off and open all of them again when turning on the mini.
Regarding other IR devices: The only IR device now is the keyboard. I even took out the batteries and the mini still woke up over the night!
Thanks again for your support guys. Please let me know if you have any further information of ideas.
Cheers
Quartz84

M70-160: won't wake up from hibernate or standby - software or hardware?

I just got maaaaaan!!
works fine, but won't wake up from hibernate or standbye !! unless yur gonna wait for awhile!! 15min or something like that!!
After that it will wake and work normally !
I thought it's overheating problem but now just power it on and when the toshiba logo appear if you turn it off, it won't power on again, but after 15min it WILL !!!
so it's not a heating problem !!
It does that even without HD on it !!
at first it was hibernate and standby problem, now it dose the same with shutdown !!
what can I do!!
i just bought it guys !! ASP is to far a way !!
is there anyway i can do to fix it !!
i do fix PCs alot but not notebooks !!

thank you for your help and the fast replay, i really really appreciate it.
I'll explain the problem in details, right after hibernate or standby IF you press power button the led goes blue, fan starts, HD led lights, battery led, power adapter led (if its connected), and cd player make sound as if it looking for a CD, and THEN fan stopped, HD led goes off, no sound of CD, leaves u only with power button led ON, a nice frustrating Blue
after waiting, u eventually gave up, turn it off by along press on power button, and then no matter wut u do, simply won't start only same sounds and leds as mentioned previously, nothing on the screen as if its dead !! no logo no nothing.
give it a time ( about 15min with battery connected, or 5min or less with battery out) Press the power Button, THERE U GO, works perfectly !!
same case with shutdown but not always as hibernate and standby (though once it did wakeup from standby!!), but most of the time after shutdown u have to wait 15min!!
no USB flash memory connected or anything else !
i did install winXP pro SP2 on it and installed the drivers and Microsoft HOT fixes also, but problem remains.
i also did recovery from the recovery CD that comes with it, also no good !!
i noticed that if u disconnected the battery the unit needs shorter time to be able to wake up or boot. about 5 min.
wut kills me is that the unit works perfectly and i like it !!! i only got this issue with it !!
so wut i need to know is this: Is there anyway to make sure weather if its a software problem or a hardware problem?
its not easy to go to the local service cuz its in another city!! i need to try first wutever it takes to fix it on my own!
thank you for your time!

Mac Mini late 2012 with Mavericks don't wake up from standby mode

My Mac minin used to run with OS X ML 24/7 without any problem. After Update to Mavericks the Mac won't recover from standby mode. I have to power off the mac.
I cleared nvram, pram, installed Mavericks second time.
What can I do? Return to Mountain Lion?

I gave Mavericks a second try. It failed. Made clean install ofe mavericks, setup user manually, reinstalled my most needed applications. The mac mini will not wake up from standby mode (blanc screen -> must reboot/hard reset; spinning beachball -> hard reset)
I reset nvram and pram.
Any advice? any chance to get informations by apple?
rgds

Wont wake up from standby

I've had this problem for sometime now, where it simply wont wake up from standby when it have slept for more than ≈3 hours, and I have to do a force shutdown.
Programs opened when going in standby: Google Chrome, iTunes, Skype, Dropbox, Hamachi, Google Notifier and iChat
I believe this happend after I installed World of Warcraft patch 4.3 (havn't installed anything else in the past months)

bump

Equium A110: Cannot use LAN after wake up from hibernation or standby

Hi guys
I cannot use lan on my tosiba equium A110 after it wake up from hibernation or standby. The lan icon is there bur internet wont work. Please help me out.
One other problem. when i try to cut some thing i cannot paste it if i open a new folder. I have to keep the folder open go back cut it again and then paste it. I mean if after cut i open any folder it wont paste it.
Please help me out .
Thanks

Hi
Did you try to refresh the connection? Something similar happens on my notebook but not with LAN but with WLan. If you right click on the small lan icon you will see the option repair. Check it.
Have found also this possibility. I dont know if it will help but try it.
1. go to [Start] -> [Control Panel] -> select [System]
2. On system properties dialog box select [Hardware] tab -> click [Device manager]
3. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
4. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
5. Press [OK] to close the dialog box.

T400 bluetooth doesn't turn on after wake-up from standby mode

Hello
Please help
My T400 doesn't turn on bluetooth after wake-up from standby mode
i need to enable it every time by hand.
Thing thing appeared after migration to Windows 7. Before, i used WinXp and that worked fine.
I setup all recommended software via SystemUpdate

On T400s this happend, if you try Linux to install and after that you install Windows 7. I have test Ubuntu (boot from LiveCD) and after that i had exactly sam eproblem. Solution was to reset BIOS to default values.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

K8N Neo Platinum - Scheduled Wake from Hibernate

As the title says, should the K8N Neo Platinum be able to wake up from hibernate at a set time? Webscheduler has the ability to set a time for wakeup to record a TV show. On my Abit KV8 Pro board, this worked fine - Webscheduler would wake the machine up from hibernate 60 seconds before the show was scheduled to begin. But yesterday's scheduled recording (using the MSI Neo Plat board) didn't work.
Before I start investigating this indepth, could I just get some opinions here (based on experience) on whether scheduled wakeup from hibernate does actually work with K8N board? Thanks heaps.
Also, does the board wakeup from hibernate when pressing a key on a USB keyboard? I have a PS2 wireless adapter for my wireless keyboard and it doesn't do it. Just wondering if a USB wireless keyboard would work better.

Quote from: jerseydevil1953 on 26-May-05, 08:25:06
Do you have anything constructive to say?

K9A2 Platinum (MS-7376) S3 not waking from suspend on BIOS ver 1.b

Hello, I’m new to posting on this forum, so if I commit a faux pas, yell at me and I’ll go shoot myself.
The Problem: System will NOT awaken from S3 standby. System DOES awaken from S1 standby.
The History: Problem began after updating BIOS from Ver. 1.5 (7376v15) to Ver. 1.b (7376v1b) to provide CPU support for “AMD Phenom II X6 1090T”. (Previous CPU was AMD Phenom X4 9850) Prior to BIOS to Ver. 1.b update, S3 standby worked just fine.
System appears to awaken (HDD spin up, etc) but the display doesn't rise and shine. My guess is the adapter doesn't get powered on.
My Thoughts: This problem appears similar to the S3 problem in BIOS ver. 1.4 which was resolved in BIOS ver. 1.5.
No other problems have been noticed as a result of the BIOS update or the CPU upgrade.
I suspect BIOS incompatibility with NVIDA Vid adapter in as much as K9A2 has had similar problem before. And apparently the K9N2 currently has a similar problem which has been acknowledged by MSI.
All thoughts appreciated . . . .
BTW – Only other concern I have with the 1090T is how to wipe the grin off my face.
Thanks for listening.

Bas,
Well Sir, as I indicated in my initial post: "System appears to awaken (HDD spin up, etc) but the display doesn't rise and shine. My guess is the adapter doesn't get powered on."
To elaborate: From all appearances, the PC goes into S3 suspend state just the way it has for a couple of years now. That is to say, the HDDs spin down, the fans turn off, the lan light stops blinking, the router for this PC turns yellow from green meaning it is no longer active, the monitor blanks to black and then powers down.
When I try to resume from the apparent S3 suspend state by pressing the ctrl-space keys; the system, case, and cpu fans start spinning, the HDDs spin up, the lan light starts blinking, the router light for this PC turns from yellow to green, and the monitor powers up -
BUT IT REMAINS BLANK, BLACK, DEAD, AS IN NOTHING DISPLAYED ON IT
And that, Sir, is the problem, at least from my perspective.
Merry Christmas, Alfie

K9A2 Platinum: No wake-up from S3 Standby

Similar Messages

Maybe you are looking for