K9A2 Platinum not loading raid drivers sb600 or promise for raid 0

I am tired of trying by myself, hopefully you guys can help me out Ive been fighting this thing for 2days now and i hate this computer I'm on that feels like 28k dial up.
   i know theres the promise plugs and the sb600, and i know they have different drivers. i also know that you have to disable the sb600 raid to get the promise working and vise versa *read the manual for that*. i set up the raid in raid configure *<alt-f>* and set it to raid 0 and assign the raid, and its fully functional.
   the problem is when it comes to boot windows i hit f6 and then use the drivers i got off the cd...or website *two floppy's* and pick the i86 raid configuration *windows xp not 64, 64bit one is corrupted on both disks as well* it gets through that part, i format the drive *it sees in in raid in fast configure and in windows format, not in bios* and then go to install. it begins to install and stops on the first file FTT.inf, it apparently cannot read it, which is the same file on the disk if i am not mistaken. i have tried to install about 100times,if not more with different configurations in the bios.
    the settings i have now for raid set up in the bios are:
integrated peripherals
extra raid controller enabled
in I/O devices on chip sata controller disabled *tried both enabled and disabled same problem*
it does not show drives in the sata ports but i figured that since it only shows 1-4 and the internal promise are the 5/6 ports.
   i have formated and re-installed the drivers on the disks multiple times ive also tried the sb600 drivers disabling the extra raid controller in bios setting raid *it finds it in the 1/2 slots then 1 as raid* configured it in the raid set up as well but the same problem arises except its not FTT.inf its ahcix86.inf that errors. skipping the files *which is obvious  but i tried it just to see what would happen * causes blue screen on reboot and another error of the same type at 99% but .sys file this time.
   i have installed windows on one drive and booted up using the same drivers was able to configure everything was slightly inclined to just say screw it 1 drive it is. but it was a shame since i bought them both to raid 0 em from the start. loaded windows up and even installed drivers.
   i also heard that u need to do full format sometimes to get the raid to work if you have tried both raid drivers so i did slow fat format... no avail did it twice. and fast the rest. if you guys know of any boot-able type formating program that i could throw on a floppy disk that would be great too, if thats the case.
i am at a wall and frustrated as all hell with what Ive done so far hope u guys can help me out, tried to be as detailed as possible but i bet i missed something .
rig specs*dont know if this will help but w/e*
msi K9A2 platinum
amd 4200 duel core socket am2
1gig of patriot 667 ram 512x2
ati x1900gt video card
Samsung spin point 160gb sata drive x2 *praying to god to put it in raid 0 once again*
THX FOR READING :D

Quote from: asd9000 on 17-May-08, 08:51:19
did all those settings. and have the newest and the disk version of the drivers.
do u guys really think that it not being able to find the driver file a power issue? either way i ll do anything at this point i rewired some stuff where the video card has its own rail and the hard drives have theirs with the cd-rom drive. took out my fan controler and really power hungry after market video card fan replaced with an old 60mm fan.
Error once again... ??? DAMN FTT3.inf file
edited: cause i sounded like an angry a$$hole with that first line :P
Stop swearing here! It's NOT allowed.
As for the floppy, goto the command prompt of a Windows machine, then type "format a:" and let the floppy format, if your floppy shows any error throw it away and try another.
It's not uncommon floppies fail.

Similar Messages

  • Power book not loading (error: unable to find driver for this platform) help me please

    power book not loading (error: unable to find driver for this platform) help

    That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
    You post is a little cryptic, however. We may be of further help if you can tell us:
    <> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
    <> what program and its version your were trying to run and/or install.

  • I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

    I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

    Hello Lcw2610,
    I would recommend deleting the affected movie from your iPad, and redownloading the movie.
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Download past purchases
    http://support.apple.com/kb/HT2519
    If the issue persists, please do report the issue to the folks in our iTunes Store.
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

  • Websites would not load unless I move my cursor for Firefox RC

    Whenever I load a website, I notice that unless i move my cursor a little, the website would not load. I didnt notice this for previous versions of FF though.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • K9A2 Platinum Cannot Use RAID and PCI IDE card [SOLVED]

    Hello,
    I am trying to do the following set-up on my K9A2 Platinum, using a Phenom 9600 processor:
    - 2xSATA2 250GB Seagate drives on Promise T3 SATA controller (to be used as RAID 1 devices)
    - 1xSATA DVD-RW on Sb600
    - 2xIDE DVD-RW on onboard IDE
    - One PCI HiPoint RocketRAID ATA100 card (operating in IDE mode) on PCI slot 2 with 1xIDE 40GB hard disk (my Linux partition)
    On the BIOS I have enabled the Extra RAID function, in order to enable Promise to work as RAID.
    The system POSTs as follows:
    - Initial detection (CPU, RAM e.tc)
    - RocketRAID gets initialized and detects the IDE disk attached (40GB)
    - Promise RAID tries to detect the disks (the RAID array) and the whole system hangs.
    I've tried to relocate the two SATA hard disks to the SB600 controller (SATA 1&2 ports), but the same thing happens (after changing the BIOS to disable extra RAID function and enable RAID mode on onboard SATA SB600). The only way to POST the machine, is to remove the RocketRAID PCI card, but this way I can no longer boot my Linux disk.
    Using BIOS 1.2 and 1.3beta 2 (sent to me by MSI support).
    Any help is greatly appreciated.

    Thanks for the replies.
    Now, I'm going to surprise you: I managed to make both cards (the Promise and HighPoint) work together! Read how...
    Somehow, I got the impression that the problems I had were either caused by the BIOS or the hard disks (the SATA ones). I flashed the motherboard back to the official 1.2, doing a complete BIOS reset (removed the battery) and tried again without the RocketRAID card installed. This time, the Promise BIOS (which btw is an earlier version from the one the 1.3b2 BIOS had) reported that the one SATA drive was malfunctioning (and it was a sealed brand-new Seagate). Removed the drive, installed it on SB600 and SeaTools indeed reported that it was failing (it didn't manage to pass even the quick test...).
    Now I was curious: could it be that this - together with the beta BIOS - was the cause of my problems? I installed the other SATA disk to Promise T3 (the red socket) and the controller detected it, but all I could do is to set it up as a RAID 0 array (which pretty much does nothing). Next, I installed the RocketRAID also together with the IDE Linux disk and the system detected both disks; I can boot Linux fine and enter both the RocketRAID BIOS and Promise T3 BIOS. I can delete and recreate the array in Promise T3 as I please, but due to the fact that I only have one SATA disk now, I get limited options (RAID 0 and JBOD).
    Is it safe to assume that since the Promise BIOS is working with the RocketRAID installed, that my SATA RAID controller is working?
    Tomorrow, I shall return the SATA drive to the store I bought it and get a replacement, so that I can set up my RAID 1.
    The plan is to have Linux boot from the IDE (I've never managed to set up a Linux disk to boot from RAID) where Windows Server 2003 will boot from RAID.
    Will keep you posted about the progress I make.
    BTW Bas, I'm sorry I couldn't make out much of your brainstorming 
    Regarding the Promise controller: the board has a Promise chip right above the SATA ports, which has the number 42819 on it. I can also verify that both SB600 RAID and Promise T3 RAID have EXACTLY the same BIOS menu interface (the only differences are the texts "ATi SB600" and "Promise T3" on the menus, plus that the SB600 has also an option to securely erase the drives which Promise does not have). Are you suggesting that the SB600 RAID is actually the Promise T3? I do not know if it would be possible to have BOTH RAID controllers (SB600 and T3) working at the same time (I do not have enough disks to try...).

  • K9A2 Platinum - Install to RAID - Memory issue

    Hello all,
    I have a MSI K9A2 Platinum AM2+/AM2 AMD 790FX ATX AMD Motherboard with a AMD Phenom 9950 BLACK EDITION Agena 2.6GHz Socket AM2+ 140W Quad-Core Processor Model HD995ZFAGHBOX.
    I have (2) OCZ Platinum 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model OCZ2P10664GK, installed for a total of 8G, but can not get it to work at 1066, is this even possible?  The system runs fine at 800, but keeps getting BSoD when switched to 1066.  The timings from OCZ are EPP 5-5-5-18 (CAS-TRCD-TRP-TRAS), and I have played with the voltages in the range of 2.1 - 2.2V.  Power should not be a problem as I have a COOLMAX CUQ-1200B 1200W ATX12V / EPS12V SLI Ready CrossFire Ready Active PFC Power Supply.  Anyone have any suggestions?

    It won't run 1066 with all four sticks. Simple as this you already found the solution either you have 8 gigs and ddr2-800 or 4gigs at 1066.

  • Field Point 4.0.1 will not load LabView Drivers

    When I load Field Point 4.0.1, it does not load the LabView Feild Point VIs.

    Dusty,
    What version of LabVIEW are you using? FieldPoint 4.0.1 came out before LabVIEW 7.1, so it will not recognize a LabVIEW 7.1 installation. Likewise, FieldPoint will not support LabVIEW versions that are too old. You can over-ride the installation parameters by running a custom installation of FieldPoint 4.0.1 and choosing the LabVIEW installation that you want. Please note that if your version of LabVIEW is older than supported, the VI's will not work. If you have LabVIEW 7.1, the VI's should work but you will miss out on some of the FieldPoint 4.1 functionality for LabVIEW 7.1.
    Regards,
    Aaron

  • Yosemite - could not load internet accounts preference pane - same for icloud - mail not running

    After Up-Grade to Yosemite 10.10:
    Mail not working
    Preferences Error Could not load Internet Accounts preference pane
    Preferences Error Could not load iCloud Accounts preference pane
    Had several issues when upgrading from Mountain Lion to Yosemite 10.10. Finally it seemed to work. When starting Mail, I tried to restore data from Time Machine (did a back-up under Mountain Lion immediately before up-grading to Yosemite). This ran for over 2 h when I suddenly noticed that "Mail quit unexpectedly. Since then I cannot work with Mail at all.
    I read on the forum that many people have issues with Mail in Yossemite but apparently it's different from what I am experiencing, and it seems that none of the proposed solutions work for me.
    I can start Mail, but I will only see the bar on top of the screen. Mail "Preferences" remains grey (= cannot click).
    When choosing Mail "Accounts", System Preferences opens and then I get the "Preferences Error Could not load Internet Accounts preference pane."
    I noticed then that I get a similar error when clicking "iCloud" in System Preferences: "Preferences Error Could not load iCloud Accounts preference pane."
    I can open "Internet Accounts" and "iCloud" in System Preferences when I log in as a guest without any errors, but as soon as I log in with my user name, I get the same errors.
    As suggested elsewhere in this forum, I removed the com.apple.mail-shared.plist in library and tried the same with com.apple.internetaccounts.plist.
    I've spent hours on this and find this increasingly frustrating. I would try another new installation of Yosemite, if only I could be confident it would work this time...
    Any advice how to solve this will be appreciated!

    Hey Sage,
    Glad you got it fixed!
    I had exactly the same problems, but found this solution on another thread courtesy of Paul Pharoah which saved the trouble of another clean install and seems to have fixed everything  . It appears the problem lies somewhere in the mail account settings.
    "I 've had the same problem today and tried lots of the suggested solutions around, all without success until....
    1.  I moved all the files in ~/Library/Mail/V2 to the desktop
    2. Deleted the folder
    3. Deleted my two email accounts (Gmail and exchange server) using System Preferences>Internet Accounts
    4. Re-started Mail.  It now re-started as if for the first time and asked me to re-input my mail accounts which I did.
    5. Mail up and running again."
    from thread: Re: Yosemite mail crash
    Cheers!

  • K9A Platinum - Not seeing RAID Array on restart...

    Hello again guys...
    Here's the deal...
    The computer will not recognize the RAID array when I choose to restart from inside Windows. If I press the reset on the computer or I do a shutdown then reboot, it works fine. Also, this morning I finished a clean install of Vista 64 and forgot to turn off sleep mode like I normally do, and when I came back home I got a tasty blue screen. When I tired to restart I got a message stating that the RAID driver was corrupt or missing. I reloaded Vista again, but I still have the issue of the machine not seeing the RAID array upon restart, and I have tried this about 10 times with the same results.
    Restart = No Recognized RAID Array.
    Cold Boot, Reset Switch or CTRL+ALT+DEL = No problems.
    My system specs are in my sig below.
    There was one other tidbit, I had a problem with this motherboard failing to load Windows with 4GB of RAM installed when I first got her, and thru this forum and the MSI help center, it was suggested I update my BIOS to a beta version that was out at the time. I see now that the version is now a standard release v1.6, should I go to the release BIOS or just stay with the current one?
    Thanks for your time! 

    Yes I can.  I first installed XP Pro since I was testing system stability with my new 6000+.  Every soft reboot results in the array being undefined.  I have to wait until the controller scans and says there is no array, then I can reset it to make it see the arrays.  If I reset before the controller scans, it still shows no arrays.
    Vista 64 Ultimate will only install on my K9A platinum if the following is true:
    1) The SATA controller is in RAID mode, I have 4 SATA HD's, none are striped, and my DVD is external
    2) The desired HD/array must be the first boot device, if the DVD is first it will refuse to recognize the partition as valid to use
    If I use Native IDE or AHCI mode, Vista doesn't see any partitions.  If I use Legacy IDE mode, Vista will start the install, but on reboot the motherboard pauses for 5 minutes and tells me the HD has an error and I have to hit F1 to continue.
    I only recently got  Vista 64 Ultimate stable again.  I was having a problem where the system would power off instantly when it reached the desktop.  I replaced the power supply.  I then had trouble getting the drivers installed without crashing the OS.  One thing I noticed while reinstalling Vista is that Microsoft automatically updates the driver for the RAID Controller. The driver version is 2.5.1540.41 and the version that the ATI 7.6. and 7.7 want to install in 2.5.1540.36. That would put it out of sync with the ATI RAID Console driver.  The next reboot would result in crashing.  Can't prove that is why though.

  • K9A2 Platinum bios 1.4 or 1.5 Promise RAID fail Boot.

    Ok I have BIOS version 1.3 running fine. I want to upgrade to a bios that officially support the phenom and its power usage. So back in may I try to upgrade to bios 1.4. No good the machine will not boot the RAID set that contains window XP.  :( Reverted back. Contacted support. Not much help... a few weeks pass. Contact support again they send me bios version 1.51. Same issue.  Reverted back to 1.3. Recently I tried the final release of 1.5 with the same issue. 
    Anyone out there using a phenom on the K9A2 and booting with the Promise RAID controller in a striped 0 set ? How did you get it to work with the current bios version. Tech support 'claims'  they have no problem with the bios and that they have tested it with the promise controller booting to XP.
    Thanks,
    Jon Harrell

    Considering the very large files that regularly run through the system and the extra cpus that windows inefficiently uses I doubt a software controller would impact the performance gains significantly. The units we have prep large format presentations and regularly handle very large files. Bandwidth is key. If this was the average desktop or even a web server yes 1 drive would most definitely be faster. But that would be a different subject.
    Although now we might just be considering scraping the whole MSI created mess, and purchasing a hardware solution like that of the quad sata raid in our server.
    But for now:
    Does any one know the perfect combination?
    e.g. Promise driver 1.1.1030.47 !work with Bios 1.50 (promise 2.8.1030.0032)
    Thanks,
    jh

  • PSEMAgent did not load any information into the hub for Webshpere 6.1 ND

    Hi all,
    using
    Oracle 10 R2 10.2.0.3
    Webshpere 6.1 Network Deployment
    Peoplesoft HRMS and Campus Solution 9.0
    i run the two commands startagent.bat recrawl and startagent.bat, the agent started sending pulses "sending pulse from com.peoplesoft.emf.peer:id=1".
    but when i entered the hubURL into browser, there was no registered host (at that time both PSEMagent and Change Assistant were running)
    Note: webserver is using port 80
    someone please guide me how to deal it using websphere

    What is your OS ? Does the server run on the same box ?
    Did you configure the files as well :
    %PS_HOME%\PSEMViewer\envmetadata\config
    %PS_HOME%\PSEMAgent\envmetadata\config
    especially the parameters
    hubURL
    agentport
    windowsdrivestocrawl
    And also the file in your webserver directory path :
    %PS_HOME%\webserv\peoplesoft\applications\peoplesoft\PSEMHUB\envmetadata\config
    (the folder in italic may differ on your side).
    Please, if you can, paste here the files content.
    Nicolas.

  • Songs purchased through iTunes on iPhone 4 get download error and will not load.  Account has been charged for the purchase.

    I purchased an album through iTunes on my iPhone 4, and my PayPal account has been charged for the entire album.  However, all but 2 songs would download to my phone.  The other 2 have a download error.  Any suggestions on how to fix the error, or to get a refund for the songs that I can't get?

    I purchased an album through iTunes on my iPhone 4, and my PayPal account has been charged for the entire album.  However, all but 2 songs would download to my phone.  The other 2 have a download error.  Any suggestions on how to fix the error, or to get a refund for the songs that I can't get?

  • K9A2 platinum setting SB600 raid

    Hi all,
    The K9A2 platinum has 2 raid controllers onboard. A SB600 for port 1-4 and a promise T3 controller for port 5+6.
    I'm trying to make my RAID config on port 1-4 working. Where can I configure the RAID 1+0 for ports 1-4. On port 5+6 I have 2 raptors in raid 0.
    I already searched around, but everywhere they talk about setting up the promise controller. I want to configure the SB600 controller.
    the Raid 0 on port 5+6 is for booting (already working), and the raid 1+0 on port 1-4 will be for data.
    The 4 disks are with HD tune erased with zero fill.
    in the bios, the controller is set to raid.
    in the FastBuild utility I don't see the disks from port 1-4.
    Can anybody help me with this?

    OK, I got into the fasttrack menu for the SB600.
    I also use the promise raid controller. When I want to enter the menu for the SB600, I have to disable the extra RAID controller in the BIOS under 'Integrated Peripherals'.
    When booting after change and press ctrl+f, the fasttrack menu for the SB600 appears.
    Thank you for your help Svet.

  • Movie not loaded on Win 7 - 64bit

    Hi all,
    this question is in a similar thread as this:
    http://forums.adobe.com/message/4184624
    However i have been unable to resolve this issue as the previous poster was.
    i have completed 3 separate OS installs of windows 7 (2-64bit installs and 1-32bit install).  However i have been unable to resolve my flash problems.  Here is the details:
    System:
    -AMD x2 athlon
    -Asus m2-a vm motherboard
    -6gb ddr2 ram
    -realtek 1gb nic
    -xfx nvidia 9600gt
    - windows 7
    -IE 8/9 attempted
    -Chrome attempted
    I have so far been unable to get the flash player to load at all.  I have tried to load the offline installer as admin user context, and no luck [when i say load i mean the flash player itself, installation of flash has succeeded everytime without issues as have uninstallations.] .  I have tried older installers with no luck.  i have also tried different browsers.  not one combination has worked.  I've tried clearing settings on the local 32-bit control panel.  However I can't disable the hardware rendering because of the fact it never loads the applet on any of the status pages for me to access.
    At current, i have reloaded windows 7 64-bit and am looking for a more in depth answer to see if any ini files or reg settings exist for setting these to software only rendering.  However I am not entirely convinced that this is the problem.  I think the problem maybe more related to the player specifically not loading the movies or not even properly running the appropriate installed dll`s.
    Before you ask, latest nvidia drivers loaded and flash is enabled in add-ons as many of the others have suggested.  Please help, this has eaten up a week of my mind now.
    Also should note all MS important patches are installed as of 4/8/2012 - and Service Pack 1 is installed on Windows.  I've also just completed installing IE 9 on this fresh build of windows 7 64-bit.  I've also installed Chrome, this morning and it also received the error "movie not loaded".  I'm also using the latest version of 64-bit FLASH (11.x.x.x.x) version that was downloaded this morning. 
    So I'm now at a stopping point.  I cannot use Amazon at all, or Youtube.  It appears to load the plugin on some level as I can see the youtube videobox in black and then when I try to right click, it shows "About Adobe Flash 11.xx.x.x.x" or "Movie not loaded"... Thanks again for any assistance you can provide on this.
    Update:
    After much looking on the forums, I'm now attempting to verify with another functional PC that the actual files are present.  I've found that the following files are present on the working system:
    The system having the problems appears to be missing alot of these files.  The OCX is the only file present.  I'm going to see if I can verify what happened here.  So hopefully this won't recur.  However it looks like there maybe an issue with the installer at this time.  I can't imagine how thougth when I've tried downloading the full offline installation version.

    This computer has two different versions of Flash Player for Internet Explorer and two different versions of Flash Player for other browsers.
    A clean install is recommended: 
    Windows
    Download the current 32 bit uninstaller    Uninstaller for 32 bit Operating Systems
    Close all browser windows and run the uninstaller 
    Restart Windows 
    Delete all remaining files and folders located in the following directories. (tip: copy and paste these paths into the path bar in an Explorer window) 
    C:\Windows\System32\Macromed\Flas 
    %appdata%\Adobe\Flash Player 
    %appdata%\Macromedia\Flash Player
    Verify that the file “FlashPlayerCPLApp.cpl” in C:\Window\system32\ for 32 bit systems has been deleted.
    Download the following installer files:
    32 bit Flash Player for ActiveX (Internet Explorer)
    32 bit Flash Player Plug-in (All other browsers)
    Physically disconnect from the Internet and run the installers.

  • Creative cloud is not loaded

    Good morning / afternoon / evening
    I have a problem when I start or open, creative cloud desktop (pc) session start with my account and password, after that loading symbol appears and remains so, I just go out and the option already, but does not load apps , behance etc.
    Thanks for listening, I hope you can tell me to do.

    Spinning Wheel Re: Creative Cloud app loads then freezes with empty dialog box.
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

Maybe you are looking for