K9AGM2 Mother Board, Related to the USB Ports

I have had this Mother Board for about 3 years now and ever since I have had it. I can't seem to get any speed out of the USB ports. They all seem to be 1.1 and they should support 2.0. I downloaded Live Update 5 and installed some drivers and carp like that. I scanned the drivers for virus and so on and I still can't get any speed. I try and copy files from my HDD to a USB 2.0 SATA Drive and I can't get any thing better then 4.x to 5.x Mbps. and using USB 2.0. I should be able to get 480Mbps. I didn't see any thing in the Bios to change it or to set it. It seems to be running at 1.1 speed.
Does any one have any ideas on how to get these USB ports working up to speed.

Sorry, No that didn't work. and from what I been reading that 480 Mbps is not a theoretical. From what I have fount that the drivers are not setup and that the drivers should say USB2 in the descriptions and they don't on my PC. I have 4 other PC's and they all have USB2 in the descriptions in the Drivers list. So for some reason this PC has defaulted back to USB 1.1. and I don't know why.
I tried to update the drivers. I tried to remove them and reboot. and I still get the same results. when I try and copy 2 gigs worth of file from my HDD to my Flash Drive and it says I will take 3 hours to do that. Then I know there's some thing wrong. I tried the same thing on one of my other PC's and when I copy 2 gigs worth of files from my HDD to my flash drive and it it only take 5 sec's. Again. There's some thing wrong with this PC
I'll have to call MSI Support on Monday. Unless you have any ideas, I been searching for some results on google.com my mother board didn't match with what they have. What I did find, that it has to relate to the PCI Bus. And I updated those drivers with Live Update 5.

Similar Messages

  • Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • Usb 2.0 port on the right side (beside thunderbolt port) of macbook air 13" 2011 is busted, one of the pins inside the usb port is bent, is this replaceable? saw the pix on ifixit that it is part of the logic board.

    usb 2.0 port on the right side (beside thunderbolt port) of macbook air 13" 2011 is busted, one of the pins inside the usb port is bent, is this replaceable? saw the pix on ifixit that it is part of the logic board.

    The fix is a new logic board. It might be tempting to turn off the computer and start poking around inside to fix it yourself but you risk separating the port from the logic board and doing even more damage.

  • How can I test the usb port on my Time Capsule to see if it is working?

    Ever since lightening struck nearby (which took out our internet and copy machine) the printer I had connected to the usb port on my Time Capsule in my office has has failed to print through the TC. I can plug the printer directly into my MacBookAir and can print just fine. So there is nothing wrong with the printer nor the usb cable.
    I've turned off and unplugged the printer with the usb cable connected & disconnected to the TC, no change. I've unplugged the TC, no change. I've opened the printer utility several times, and always get the "offline" error. I open the print queue, and it says the printer is not connected. I reinstalled the driver for the printer, still the same thing.
    I'm starting to wonder if the usb port on my Time Capsule got fried. Any help anyone can give in trying to see if the usb port even functions anymore would be greatly appreciated.
    My Time Capsule is model no. A1409.

    Power is not likely to be killed .. it is the data components that are more fragile.
    So you do have power which as you say is why the USB flashes.. but you don't have signal.
    The only other thing you can do is use USB powered hub.. if you have one handy.. but I would not go out and buy one.
    A damaged board is impossible (at cost less than replacement TC) to repair. And repairers do not like working on stuff damaged by lightning as components that did survive were stressed.. the transistor junctions become liable to fail at any time.. so you repair it and it just keeps coming back as not working. Sorry if you cannot use it without USB junk it and buy a replacement. A second hand Gen3 is about the best of them it seems.
    You can also buy an ethernet to USB print server.. but a new ethernet or wireless network printer is probably near to the same price.
    You can hunt ebay for second hand USB print servers.. or airport express, extreme or TC.. often you can find something suitable for just a few dollars if you shop well. Since you don't need the latest greatest to do this sort of job.. and people are disposing of things like USB print servers as soon as they buy network printers.

  • Why does the mouse 'run' to the lower right side of desktop and freeze when a SmartBoard is plugged into the USB port.  Running 10.8.5.   Sometimes the pointer has a cloud under it but it always freezes.

    I run SmartBoards connected to iMacs running 10.7 and 10.8 throughout my school.  On one of these computers the mouse has recently started freezing the minute a SmartBoard is plugged in to the USB port.  The mouse 'runs' to the bottom right side of the screen, a cloud often is under the pointer, and it is not longer interactive.  You can move the mouse upward a bit with the cloud following some of the time but it does not work.  Once the SmartBoard is unplugged the mouse works normally.  This particular computer worked fine with the SmartBoard until recenlty.  Any solutions or ideas?

    1. Reset the Pram and SMC
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ph14222
    If these don't relate to your computer a quick web search will get you details
    2. Run the Disk Utilty to verify the disk and then repair permissions.

  • I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions?

    I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.

    I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
    I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
    http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
    http://compare.ebay.com/like/320779457703?var=lv&ltyp=AllFixedPriceItemTypes&var =sbar

  • How do I determined if the USB ports are working?

    How can I determine if the USB ports are working.  Macbook Pro i7.
    Thanks for any help.  This is a new computer to me migrating from a PC system.

    Blessings to those who are able to reply with possible answers.   I am sorry....but I have spent days working on getting my two USB ports to work also.  I basically use the USB ports for a wireless mouse and various flashdrives/memory sticks.  I have a MacBook Pro 2011 Snow Leopard 10.6.8  I have tried software update, SMC and PRAM resets, battery reset, hardware test, creating a new user account....and browsing and reading numerous discussion boards.....awgh!  I have stopped short of using my install DVD (fear of loosing data), upgrading to Lion or Mountain Lion (some fear of loosing an application that might not be compatible), contacting an Apple Store (AppleCare or whatever--live 2 hours away + fear of expense), and of course, trashing the laptop.  Does anyone out there have any possible solutions?   I see I am not alone.  --A frustrated first-time Apple products owner.

  • Where are the USB ports

    Where are the USB ports
    This question was solved.
    View Solution.

    Hi Moth!
    I am only in my 69th year but I also find groping about behind PCs with the spiders a PITA!
    So,  buy a USB hub. I have several. One of the best is called "Masterplug" it clamps on the back of your desk and has 4 USB ports, a 13A power socket, RJ45, RJ11 and headphone jack on the front. Bad news is I can't find another one!
    However, some kit won't work on hubs so buy some 1mtr USB extension leads, buy the best quality you can. Plug those in and bring them out to the front of the machine.
    Dave (an inveterate tinkerer)

  • How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
    I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

  • My ipad is locked up with the screen showing the usb port connecting to itunes.  I had not synched by ipad to my computer in a long time so yesterday it was downloading software upgrades for 5 hours.  then the screen was locked up.

    My ipad is locked up with the screen showing  a picture of the usb port with an arrow to itunes.

    Then connect your iPad to your computer and use iTunes to restore. 

  • I have a HP Laserjet P1102w printer hooked up to the USB port of my Airport Extreme. I'm able to print to the printer wirelessly from my MacBook Pro. My iPad (2nd gen) can't find the printer. What do I need to do?

    My iPad is on the same network as the Airport Extreme. The HP printer is on the list of Airprint printers but I'm not using it as a wireless printer, per se, as it's hooked up to the USB port on the Airport Extreme.
    I installed the HP ePrint app on my iPad. Unfortunately, the app could not find the printer either. 
    As mentioned earlier, I'm able to print wirelessly to the HP printer via my MacBook Pro.

    ApplePearApple wrote:
    Since I'm able to print to the HP printer from my MacBook Pro using this configuration, shouldn't I be able to print to the printer from my iPad, especially when all of the devices are on/using the same network?
    Not necessarily. AirPrint uses a protocol separate from the communication protocol used for the Extreme's USB port. The HP printer may disable AirPrint when its USB port connected to a valid device, which is my reason for recommending you use it wirelessly.
    From AirPrint Basics:
    AirPrint printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported.
    AirPrint printers connected by Ethernet are supported in OS X.
    You may get more competent assistance from HP. See this HP support forum topic: iPhone & iPad can't Airprint to p1102w LaserJet
    HP's Mac support has always been miserable though. I have been much happier since I abandoned HP and started buying Brother printers. They just work.

  • Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

    Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
    a) HP printer with USB port only (no ethernet port) connected to Airport Express
    b) No issue printing from Macs
    Tests
    1) Installed Bonjour 2 - does not find printer (now uninstalled)
    2) Bonjour 3 is listed in programs but no way to access
    3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
    Regards
    Richard
    p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

    This is possible, but not with Bonjour or any other fixes.  It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
    I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • Why does my nook open iphoto when i plug it in the usb port on the back of my imac running 10.6.8

    I have downloaded Adobe Digital Editions and downloaded Overdrive from the public library. When I plug the Nook eReader in the USB port in the back of the iMac, iPhoto opens immediately. I know this is not a forum for Nook eReaders, but I have to start somewhere and figured since iPhoto is opening automatically, maybe someone can give me a clue.
    thank you,

    Most likely, because your Mac and iPhoto think that you have connected a camera or mass storage device that has images on it.
    Not sure where to go from there, but I would start by looking at the setting in both iPhoto Preferences and Image Capture if I wanted iPhoto to ignore that device.

  • One of the USB ports on MacBook Pro does not work.

    Hi,
    I purchased a MacBook Pro in Jan '11. Both the USB ports on the laptop were working fine. Recently, I have noticed, any external device connected to the USB port, towards the battery side does not recognize the connection.
    Any solutions ?. Is this defect covered under warranty ?.
    Regards
    Anil Madan

    Anil,
    Try resetting the SMC.
    SMC RESET
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

Maybe you are looking for

  • FAQ: How do I submit a bug report or feature request or otherwise give feedback about Premiere Pro?

    The best way to submit a bug report or feature request is to use the bug-report/feature-request form. The Premiere Pro team doesn’t  necessarily see and record every post on every forum and social network, but we do see, record, and track every entry

  • RTC-5260 and RTC-5301 error in Oracle Warehouse Builder (OWB)

    Hi, I'm a newbie in OWB and I still have to fix some concept in my mind about the infrastructure. I'm experiencing the error in the subject while deploying an object (the first object I'm trying to deploy) in OWB. I also tried to execute the $ORACLE_

  • Problem Creating a query for a hierarchical tree. [using connect by prior]

    Hi all, I have 2 tables. box (box_id, box_name) item(item_id, item_name, box_id) In a box there are several items. I want to create a hierachical tree to display items that are present in each box. LIKE: |---BOX1 | |----ITEM 1 | |----ITEM 2 | |---BOX

  • Simple scenario

    Can somebody explain a simple scenario (like 2 or 3 dimensions and 2 or 3 key figures) starting from data load (from flat file, so that I can create using EXCEL) to creating infocube and generating a report.   Or is there any source that I can find t

  • Mac OS 10.6.8 keeps crashing

    Would going to Moutain Lion help with this? Evertime I try to back up my Mac Using CronosSync or try copying large file (ie.iTunes music) it freeze my Mac.