K9AGM3-F does not boot with PCIe 4x device in PCIe 16x slot

K9AGM3-F motherboard does not boot with PCIe 4x Intel PRO/1000 PT dual port network interface card installed into PCIe 16x slot on motherboard. The boot process stops in BIOS screens. The motherboard works flawlessly without this NIC. K9VGM-V + Intel PRO/1000 PT boot successfully. I tried three K9AGM3-F motherboards and two Intel PRO/1000 PT NICs in different combinations, the results are always the same. It appears to be some kind of BIOS problem.

Quote from: Fredrik Åsenius on 09-April-08, 22:52:27
Minor point, probably irrelevant: I said you install the driver f i r s t. Then you put the physical card in.
The driver is completely irrelevant because the driver is a part of operating system, but as I already wrote before the boot process stops long before the OS start.
Quote from: Fredrik Åsenius on 09-April-08, 22:52:27
No stability issues otherwise?
PSU is always good to know.
The PSU is irrelevant too because the same NICs work in the PCIe 1x slot of the same motherboard with the same PSU.

Similar Messages

T60 does not boot with Intel T7600G CPU

I replaced my Intel Core Duo T2400 with Intel Core 2 Duo T7600G CPU in ThinkPad T60(1951-CTO) laptop. However, laptop does not boot with Intel Core 2 Duo T7600G CPU. It doesn't even complete the POST: https://db.tt/8UL8FlE0 As seen in the video, I plugged in the power adapter at 0:02 and pressed the power button at 0:06. One can hear a little click made by optical device. If I press the power button again at 0:16, this click does not happen. BIOS version is 2.27. I have reset the BIOS settings by disconnecting the CMOS battery, but this didn't help. Once I replace the T7600G with my old T2400 then I'm able to boot the laptop.
Any ideas what might cause such behavior? Shouldn't there be beep codes in case of CPU issues? What else to try?

TuuS wrote:
600X wrote:
Since you came from a T2400, does your T60 even have a Rev. 3 motherboard? If it does not, then no Core 2 Duo will work, only Core Duo's.
I don't claim to be the top authority on T60 motherboards, but I believe any will use a Core 2 T7600, 7400, 7200 if the firmware is updated.
My own experience mirrors what TuuS has stated. I have yet to see a T60/p from any walk of life with a recent BIOS that will bark at a proper Core 2 Duo CPU.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

My iphone 4 bluetooth does not discover any other devices or phones having bluetooth and ofcourse does not pair with other bluetooth devices or phones? How can i transfer files to other devices through bluetooth? Thanx

you can't tranfer files with the built in program that apple gives you, you may (i belevie) download an app that allows you

Superdrive does not show with the other devices on Macbook Air

My superdrive does not show with the other devices in Finder any longer.
Mid 2011 11" model
OS 10.7.5

So the applications is causing failures and ejects. Contact the software mfg. about resolution of this.
Have you tried the app TOAST? Very reliable and highly popular.
You can drag any disk to the trash to cause ejection

2960X-48FPS-L does not boot with IOS 15.2-2E

Hello,
i got a bunch of 2960X switches. But some of them do not boot with the new IOS Version. The older 15.0-2 EX do boot.
Does anybody have a clue why this happens? During the Bootprocess it just stops to load:
File "flash:/c2960x-universalk9-mz.152-2.E.bin" uncompressed and installed, entry poin0x3000
executing...
Loading "flash:/c2960x-universalk9-m
Thank you for your help.

On the ones that cannot boot 15.2(2)E, can you break the boot cycle using the "Mode" button?
If the answer is "yes", then try the following:
1. Copy the IOS BIN file from a working switch to a USB flash drive;
2. In ROMmon, force the switch to boot the IOS from your USB flash drive;
3. If it does not work, try a different IOS, like the EX3 for instance. Try the same process, boot the BIN from your USB flash drive.
4. If it works, try a different IOS, like EX3, for instance. Downgrade the IOS from 15.2(2)E to EX3 and see if the switch can boot normally.
This exercise will determine where the fault is coming from: IOS bug or a hardware batch problem.
To determine if you'e got a hardware batch problem, you may need to look at the serial number of the switches working and not working. From left to right, look at the 4th, 5th, 6th and 7th numerals. This will determine the year and month your appliances were made.

PCI USB Card Does NOT Work With Mass Storage Devices

I have a StarTech PCI card with 6 USB 2.0 ports that I inserted in my 500 MHz (overclocked) B&W Power Mac G3. It works great for any USB device EXCEPT for any hard drive or DVD/CD-RW drive. I checked the system.log file for errors. Nothing shows up in System Profiler or Disk Utility, obviously. Here's what it consistently says:
Dec 16 23:33:28 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 674.997 [0xf9c000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of hub @ location: 0x62000000)
Dec 16 23:33:33 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 679.977 [0xf9c000] The IOUSBFamily was not able to enumerate a device.
I'm running the latest version of Mac OS X Tiger 10.4.3. What is wrong? StarTech doesn't have a driver, but nothing should be necessary. Is there a 3rd party USB Mass Storage Device driver that might work better than the Apple generic driver? PLEASE HELP ME! I cannot live with USB 1.1.

Some users have reported problems with certain brand cards and their controller chipsets, so trying a different card may resolve the problem. Keyspan and Macally are often mentioned as being more "Mac-friendly" than some other lessser-known brands or generic cards. Does the card have a mini-power port to supplement the power requirements? With USB 2.0, each port is on a separate bus, so a card with six ports should have one. To minimize the overall draw on the available power, I prefer to install USB cards with as few ports as are needed.

P67A-GD65 does not boot with LSI 9240-8i HBA

Hi All,
When I installed my LSI 9240-8i I was able to boot to the ICH10 Raid as long as the Marvell Raid controller was disabled. Once I updated the LSI card to the latest version of the firmware I cant boot at all. I've cleared the CMOS, I've disabled everything in the BIOS (raid controllers, 1394, NIC, etc). All not no avail.
Thus Far I've tried:
-Booting to OS on the ICH10 RAID gets me into Windows 7 (x64): Resulted in the LSI controller showing, "This device could not start. (Code 10)" under Device Manager.
-Updating Firmware: Resulted in the mobo hanging on POST at code "92".
-Upating BIOS from 1.B to 1.C5 Beta: Resulted in mobo hanging on POST at code "92".
-When I move the card to my Dell Prescision workstation, the LSI RAID controller works like a charm!
Observations:
MSI P67A-GD65 BIOS v. 1.B
-LSI Firmware
20.10.1-0037 (APP-2.120.54-1235)   15-APR-11   - BROKEN
20.10.1-0029 (APP-2.120.24-1181)   - 04-MAR-11 - BROKEN
(Same as above, but I list it anyways)
MSI P67A-GD65 BIOS v. 1.C5
-LSI Firmware
20.10.1-0037 (APP-2.120.54-1235)   15-APR-11   - BROKEN
20.10.1-0029 (APP-2.120.24-1181)   - 04-MAR-11 - BROKEN
MSI PLEASE HELP!
I am running:
Mobo: MSI P67A-GD65 1.C5
CPU: I7 2600k
RAID: LSI 9240-8i
Thanks!

Quote from: NovJoe on 23-May-11, 10:16:19
Looks to me that it is the LSI firmware issue as the card works fine until you updated its firmware.
Do card with the card's vendor.
Hi NovJoe,
Thats just it. It looks like its an MSI BIOS compatability issue all along. Before I upgrade the firmware, the card works in my Dell Precision Workstation, but does not work on the MSI mobo; shows Device could not start (Code 10) error. After I upgrade the Firmware, the MSI mobo will not POST, but the Dell still boots up with the card perfectly.
Its definitely NOT the card. If both the 9240 and 9260 cards work perfectly in other computers then there is something wrong with the MSI mobo or BIOS.
Please help.
Thanks!

24" iMac AlSiO does not boot with iPod video on USB dock

Hello all,
I have already reported this as an issue with Apple.
I noticed that when I turn on my new iMac with the video iPod on the dock connected via USB, I only see the gray screen and the OS does not start. However, once I remove the iPod from the dock, then the Apple logo will show up, and the circular moving tiny line counters will ensue before the login screen appears.
Just wondering if anyone else is running into this problem.

Thanks for the suggestions den.thed and elmac.
I have done the following:
- Selected the Mac OS X on the MacHD as the startup disk and locked that from further changes. Restarting the iMac did not work.
- Verified and repaired permissions. Restarted the iMac and it did not work either.
In addition, I also tried:
- Restoring the video iPod and leaving it without contents. Rebooting the iMac worked.
- Syncing iTunes with the iPod after the restore. The rebooting problem appears again.
It seems like some synced items on the iPod are causing the issue as odd as that sounds.
I did not have this problem with my G5 iMac.
Since there is a workaround, I'll just live with that for now.
Thanks again.

Securing old 10.4 xserve with hot spare - new xserve does not boot with 10.

dear you,
I am in the murky situation of having to secure a single, non redundant productive scenario which is running on one xserve (model identifier 1,1; dual core 3GHz; boot-rom XS11.0080.B00). due to several reasons the server needs to be cloned, so that a separate xserve with a daily cloned boot-device can take over if things go south with the productive one.
unfortunately the newly bought xserve quadcore single 2.26GHz refuses to boot from the image taken from the production machine. tried to downgrade firmware, did not help. new machine crashes during startup (empty grey screen).
anybody knows any help? moving the production machine to 10.5 or newer is NO option.
an option could be two elder xserves I have here additionally. how do I find out which xserve model will boot with an image from the production server?
thank you all for any idea in advance,
thaijay
Message was edited by: thaijay
Sorry, failed to let you know the productive server is running 10.4.11. please let me know which other details I can post/will help us with this issue

This is never going to work via cloning.
The server you're cloning has to be one of the original Intel-based XServes. Each successive revision adds requirements to the OS to the point where they have a minimum OS version. In the case of the latest generation servers, they won't run on anything earlier than 10.5.6 (IIRC). To put it simply - 10.4 doesn't know how to drive the latest generation hardware.
In any case, cloning is rarely a good idea for servers anyway. You would do better to look at the services you're running and look at backup/failover plans for them rather than trying to clone the entire server. Many services such as Open Directory, DNS, MySQL and more have built-in replication systems that are designed to replicate their data across many machines. Other client-facing services such as AFP, web, FTP, etc. can be set to failover (where the second machine takes over the service when the primary machine fails).
Such replication/failover techniques are far more reliable than a daily clone, and they're also faster. Replicated data could be maintained up to the minute, compared to a day old data if you need to boot up the clone.
If you really, really want to go the clone route, then reverse the roles - setup the new machine as the primary server with all the services and clone this machine to create your failover system. 10.5.6 will run the old/original XServe, it's just a matter of updating your services to the newer version.

PC does not boot with Ipod Nano

My configuration:
Shuttle SK83G, Athlon64 3000, Windows XP Pro, Logitech DiNovo wireless desktop.
My problem:
If my Ipod Nano is connected the PC will not boot. The bios screen shows up and then nothing happens. I even can not access the bios. If I remove the ipod the PC will eventually start windows. But in absolute slow motion (I can see how the Windows startup screen fades in step by step).
If I connect my Nano after booting, everything is perfectly fine. Also with my Ipod Mini connected, the PC boots up without a problem.

it's not just a Nano problem, but a USB port problem
That's correct. USB is famous for this. Something in the BIOS (probably) is telling it to try and boot from the nano, but of course it can't find a valid OS there. And the solution is just what you suggested. Don't boot with the nano connected.

P35 Neo ram problems. Does not boot with 4 sticks

Greetings!
This thread is little related to: https://forum-en.msi.com/index.php?topic=110095.0
Okey so I bought this rig last friday(will post specs later). 4x 1gb ram sticks, shows up as 3.3gb. Was gona install 64-bit Vista today, but got some problems.
I left my computer on during night just to check if it runs fine. I wake up around 6am, turn power on to my monitor. Screensaver, move mouse, desktop and BOOM: Bluescreen(something about memory). Ok so I shutdown my comp, try to reboot got no signal. Removed 2 ram sticks(A2,B2) and yey it works. I plug them back in and again nothing. I test them 1 by 1 on both of the free slots, no problems detected.
Why won't my P35 Neo boot with 4 gigs of ram? And why did it work for 2days? :P
My guess is that the bios is still not ready yet(using 1.2v).
Specs: OCZ 700W GameXStream, P35 Neo-FI, C2D E6750, 4X PQI 1024Mb DDR800Mhz, Leadtek 8800 Gtx

Quote from: NovJoe on 07-August-07, 10:18:34
If I understand correctly, you are saying that you can install Vista and XP to the system but not able to boot into the OS'es when you have 4GB of RAMs installed?
I would recommend you to test the RAMs with Memtest86.
Yes, I could install Vista and XP just fine. Also at first I could boot them with 4gigs just fine. Now my system won't POST with 4 gigs.
I've tested each one of the ram sticks and they are error free.

HPE-510t does not boot with AMD FirePro W5000 (Windows 8.1)

I just purchased an AMD FirePro W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (TDP = 40 W) in my 2011 HPE-510t (i7-2600, 12 GB RAM). Dell U2913WM monitor.
My machine will not start with the new card inserted. I upgraded the stock 300 W power supply to a 450 W Antec VP450F, but that didn't change the startup situation. I tried DisplayPort and Dual-Link DVI-D.
Anyone been able to get the AMD FirePro working in an HP desktop of this generation?
Thanks,
Mike
This question was solved.
View Solution.

Hi Mike,
I am glad that you finally have success. The issue is probably that the PC BIOS level is too low.
The passmark numbers look very good.
BTW -- I had the ASUS P8P67 motherboard and donated it another forum member. It wouldn't support an EVGA UEFI BIOS based graphics card. I ended up replacing the ASUS P8P67 with the ASUS Z87.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Usb 3 does not work with my audio device

hi everybody
I've the same issue about my retina display and Usb 3,i have several audio device as AllenHeath Xone db2 and Yamaha AUDIOgram3.
The Audio is dropping often,i 've done every upgrade about Mac Os and firmware on my AH mixer,i,ve tried even to put an Usb2 Hub between my Mac and
AH,but nothing,the issue are goin on.
Please i 'd like to know why Apple does not solve this issue....
I must use my old mac when i play ad dj or performes ,actually with us2 my AllenHeat sounds great and i'm sure that the issue is about Mac's usb
Thanks Marco

Hey Marco,
This is a end-user-to-end-user support forum for the most part, I suggest you contact Apple via http://getsupport.apple.com or even http://www.apple.com/feedback to alert about your issue.
Good luck.

Yosemite does not work with Kodak 5500 device driver

Upgrading to Yosemite disabled my printing to my Kodak 5500 AIO device. Attempting to print initiated the device, but no pages would print and an error would appear on the printer display. Restoring to OS X 10.9.5 solved the problem. I'm glad I didn't pay anything for Yosemite. It does not live up to the reputation that I have experienced with Apple products.

Your problem is due to the fact that Kodak has not updated its printing software for Yosemite.
Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.
If you don't like the results of the procedure, reset the printing system.

10.7.3 does not boot with 10.7 USB

Hi all,
it seems I am in trouble. Clear Crystal killed my 10.7.3 Macbook Air and i need to reinstall Lion. Unfortunately my flash drive with 10.7 installer from App store is not working anymore. There was no change on the flash drive and worked. Does any has the same experience ?
Now I have to wait 10 hours to download installer again from recovery partition
Mag

OK, so its true. I just tried the same USB flash drive with 10.7. from App store and its able to boot from it on my Macbook Pro with 10.7.2, but not on Macbook Air 10.7.3
Mag

K9AGM3-F does not boot with PCIe 4x device in PCIe 16x slot

Similar Messages

Maybe you are looking for