K9AGM3 Mobo PS2 Mouse POST Error Message

I connected a wireless USB combo mouse+keyboard and every time I turn on the PC, I get a POST error message:
"PS2 mouse not found. Press F1 to continue"
I tried to update BIOS using the Live update Series but it informed me that I had the lattest version
Also, there is no halt on errors option in BIOS menu
How can I get rid of this annoyance?

Quote from: dpanteli on 12-January-08, 18:17:06
I connected a wireless USB combo mouse+keyboard and every time I turn on the PC, I get a POST error message:
"PS2 mouse not found. Press F1 to continue"
I tried to update BIOS using the Live update Series but it informed me that I had the lattest version
Also, there is no halt on errors option in BIOS menu
How can I get rid of this annoyance?
I have K9AGM3-FIH board, and it's suposed to be HTPC board, and what I get, I can't normally run my home theater without keyboard and mouse , because of "Press F1 to continue". How can I press F1 with remote ??? Every cheapest MB has halt on error option in bios. C'mon MSI, make a proper bios for this board.

Similar Messages

K9AGM2 Mobo PS2 Mouse POST Error Message

Bios AMI v02.61
Recently the USB mouse connected to the system died and I had to temporarily attach a PS2 mouse to install a replacement and all this works fine. However when I turn on the PC now I get a POST error message "PS2 mouse not found press F1 to continue". How can I I get rid of this tiny annoyance? I have searched the bios options and reset the CMOS to no avail.
TIA,
Colin

Quote from: corkyboy on 26-November-07, 16:31:31
I read the Moan Guide but could not find any references that were helpful. As to the origin of the board, it was purchased from a retailer here in Australia and the manual describes it as a K9AGM2(MS-7327 SERIES) and has the AMD 690G/690V chipset. Have to say in all respects it is a great little mobo.
Colin
"I read the Moan Guide but could not find any references that were helpful."
We need Full details about your system, Moan Guide shows what we need. Example in my signature.
Please provide full details about your system. ID board with Everest:
http://www.lavalys.com:8081/beta/everestultimate_build_1180_y1obfjxk7ls.zip
or look here how to ID board: https://forum-en.msi.com/index.php?topic=107777.msg798546#msg798546

Payroll to FI posting error message - Document Transfer has Failed

Hello experts,
We recently received the following error message when posting Payroll results to FI. This was not done using any process models.
'Document Transfer has Failed'
Does anyone know why it's coming up and more importantly, how to correct it? I looked and found an SNote: 1240870 but that seems to apply to 3PR issues not FI posting.
Anyone else had this error before? How do I correct this? Please help as this error needs to be corrected as soon as possible since FI will be closing the month of November soon.
Thanks,
Suparna

Hi,
http://help.sap.com/saphelp_dimp50/helpdata/en/81/42b1884a3711d189490000e8323c4f/content.htm
The posting run has the status Document transfer has failed. Posting to Accounting did not take place.
Depending on the error that occurred, it may be a good idea to start posting this posting run once again. If the error still occurs and it is not possible to post the posting run, you must delete the posting run and create a new one.
Thanks
Umakanth

Idoc posting error message

Dear all,
When I use the WPUK to generate an idoc for pos testing, the system pop up an error message as follow:
No direct postings possible to G/L account 60000000
Message no. M7059
Diagnosis
No direct postings can be made to the G/L account (because it is a reconciliation account).
System Response
The system cannot post the amount to this account.
Procedure
If the system has determined the G/L account, the system setting is faulty. Contact your systems administrator.
If you have entered the G/L account manually, enter a different account or cancel the account entered, so that the system determines an account automatically.
Do anyone know how to check and tackle this issue?
Thanks
Chris

Hi Chris,
They will be several reasons for Error message M7059. Pls check out following points;
(a) Batch Classification (After the implementation of Note 120905)
(b) Respective GL Code may required modification
(c) Check your OBYC settings
(d) After the implementation of Note 790483
Bye,
Muralidhara

Posting errors : message 3G 319

Hello,
While posting payroll results to FI(PC00_M99_CIPE), an employee has the following error (message 3G 319) :
"Customizing for wage type 5402 was changed". is it a retro error? or another reason?
Please help to resolve this.
BR,
K.

Dear Karim,
Kindly check the error with output log it will be for some earlier(retro) period(P-previous Period) type.As it is not finding the relevant wagetype for some retro period it is giving error now during posting.
In that case kindly Include the wagetype in table V_T52EZ and check simulation for posting for this employee only.
Thanks,
Salil.

Bios Post error message K9N sli AMD 64x2

I have just built as per my profile below.
After POST, and before entering the Windows load, I get this error message.
"Not enough space in Runtime area!!. SMBIOS data will not be available."
I had great difficulty loading drivers from the CD supplied with the board, as the menu did not display the full list of options. I assume this is because the SMBIOS data did not properly indicate board, procesor and operating system detail?
Any help would be greatly appreciated.

All is fixed..
Thank you all for your kind help and interest in the problems of a complete stranger. It just shows how wonderful these forums are. Thank you.
I flashed the BIOS to rev 1.3. this updated and cleared NVram etc.
Flashing was a nightmare.
I had to create a win 98 boot disk, but It would not recognise NTFS drives. Noting the warning not to flash from floppies, I then burnt a CD with the new BIOS, and addressed the CD from a boot floppy with win98 cd drivers.

Right Mouse Click Error Message

I have captured a software simulation using Captivate 6 which requires the user to advance to the next slide via a right mouse click (RMC). I have the accessiblity features switched off. However from the LMS when I RMC I get an error message refering me to the course .htm file.
Has anyone else came across this and if do how can I fix it.

You should ask in Help with using Adobe Muse CC
This Cloud forum is not about using individual programs
This Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

IDVD continues to quit, posts error message

Whenever I try to open iDVD, wether it be in the doc or through finder, it automatically quits and comes up with an error message asking if it should send the report to apple. I have tried relaunching it several times and have restarted my computer as well, but nothing seems to work. I would like to avoid re-installing the disk with iLife on it (that came with my computer) but do I have any other options?

Take a look at my several recommendations in this thread: http://discussions.apple.com/message.jspa?messageID=5929010#5929010

POSTING ERROR-MESSAGE POSTING BALANCE NOT CLEARED FOR THE PERIOD 2/2008A

Hi
I have a problem in payroll posting. While posting for one employee's persn number rejected and gave a message as Posting Balance not cleared for the period 2/2008A. To come out of the problem I changed the Payroll status record using pu03 changed the Erliest Retro date as 01.06.2008. Again tried to post but not posted again same Message displayed. After changing the Erliest Retro record I have not run the payroll for the particular employee. Is it required to run the payroll for the employee after changing the status in PU03. Request to guide on this
Thanks
EKP Yadav

Hi there
The posting may be out of balance for the employee because their credits dont equal their debits...
Do a test posting for the employee with the log on, this will tell you what amounts are being posted - and should give you an inidcation of where the balance is not cleared...
Yes, you would have to re-run the employee if you'd changed the retro date in PU03, but I dont think that will fix your posting problem....Should the employee have retroe'd?
From what I have seen, just changing the control record doesn't usually fix an out-of balance..there is usually another reason....eg wagetype incorrectly posting to the wrong number of accounts....or a missing wagetype on the employee (eg bank details...no /559 for the net pay to go to).
Cheers
Mary

Material Document not geting posted Error Message RW011

Dear Friends,
The users have created the Material Document thru Invoice Verification, however when we view the Follow on Document, we get the message - Accounting Document not generated, message RW011. How to check the error and find out the reason for the same.
Your help would be highly appreciated.
Regards

Check SAP note 781498...Solution provided is
Using transaction SE16, table RBKP, enter document number, Fiscal Year.
Check the value of logical system, field LOGSYS.
Using transaction SE16, table T000, check logical system maintained for the client. If there is a change in logical system use report ZZLOGSYS referenced in note 28958 Link to follow-on documents is lost, to
re-establish links between documents.
Please go through the entire Note to check all the other related notes
Regards,
Indranil

One full backup job to run full backup of all databases and it failed. I post error message.Any help?

Executed as user: abc\user1. ... 2004-2009, Quest Software Inc. Registered Name: abc INC
Processed 1152 pages for database 'abc123', file 'abc123' on file 1. Processed 4 pages for database 'abc123', file 'abc123_log' on file 1. BACKUP DATABASE successfully processed 1156 pages in 0.725 seconds (13.051 MB/sec).
Backup added as file number: 1 Native Size: 11.19 MB Backup Size: 1.87 MB CPU Seconds: 0.27 [SQ
The backup set on file 1 is valid. CPU Seconds: 0.25 [SQLSTATE 01000] (Message 1)
LiteSpeed(R) for SQL Server Version 5.1.0.1293 Copyright 2004-2009, Quest Software Inc. Registered Name: abc INC
Processed 456 pages for database 'WSS_Search_abc1', file 'WSS_Search_abc1' on file 1. Processed 24 pages for database 'WSS_Search_abc1', file 'WSS_Search_abc1_Data2' on file 1. Processed 1 pages for database 'WSS_Search_abc1', file 'WSS_Search_abc1_log'
... The step failed.

Hi bestrongself,
Before you use a SQL Server Agent job to back up all database, I recommend you run the backup statement in query windows directly, and check if it can run well. I do a test by using the following statement,
DECLARE @name VARCHAR(50) -- database name
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @fileName VARCHAR(256) -- filename for backup
DECLARE @fileDate VARCHAR(20) -- used for file name
-- specify database backup directory
SET @path = 'C:\Backup\'
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
DECLARE db_cursor CURSOR FOR
SELECT name
FROM master.dbo.sysdatabases
WHERE name NOT IN ('master','model','msdb','tempdb') -- exclude these databases
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO @name
WHILE @@FETCH_STATUS = 0
BEGIN
SET @fileName = @path + @name + '_' + @fileDate + '.BAK'
BACKUP DATABASE @name TO DISK = @fileName
FETCH NEXT FROM db_cursor INTO @name
END
CLOSE db_cursor
DEALLOCATE db_cursor
the script allow you to backup each database within your instance of SQL Server.
Your account need to have read and right permission to the path file.
If the above script can run well directly, then you can create a job and put your backup statement inside of it. There is a similar detail about how to create a simple backup job in SQL Server. You can review it.
http://www.petri.co.il/create-backup-job-in-sql-server.htm
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Error message from ABAP to BW portal

Hi
I need to write error message from ABAP to BW portal.
If I write as usual: message E001(ZBW).
Then I get a dump in portal.
Does anyone know how to post error message in this case?
Thanks.

Hi,
You need to use the function module RRMS_MESSAGE_HANDLING to post any kind of messages in the report output/web template or portal.
You can pass the values trough the below parameters:
              I_CLASS = 'ZBW'
              I_TYPE   = 'W'
              I_NUMBER = '006'
Regards,
Shilpa

Error message from ABAP to portal

Hi
I need to write error message from ABAP to BW portal.
If I write as usual: message E001(ZBW).
Then I get a dump in portal.
Does anyone know how to post error message in this case?
Thanks.

Hi
Good
Check the below sdn link.
portal runtime error in BW
Thanks
mrutyun^

TS4337 How do you stop the incessant error message when calendar can't update or delete an event on my Exchange, even though I have hit every option and even deleted the exchange and the calendars. I'm ready to never use the computer again with the const

Calendar is incessantly posting error messages that it cannot change or delete an event on my Exchange calendar. I have tried the "revert to server, try again, and ignore" more times than I can count. I even deleted the exchange from my connection and reinstalled without help. Even when I have deleted the Exchange, it continues to have this error window every 60 seconds. I am ready to stop using the computer just for the stress of it. Any suggestions or help before this screen winds up with a shoe in it?

To prevent Firefox from displaying form autocomplete suggestions, you can turn off that feature using the about:config page.
In the address bar, type or paste '''about:config''' and tap the Enter/Return key.
I suggest bookmarking this for easier future access.
In the search box, type or paste '''formf''' and tap the Enter/Return key.
Scroll down to '''browser.formfill.enable''' and tap the Toggle button to switch it from true to false.
That's it. Does it work on Facebook?
''The about:config preferences editor in the mobile version is similar in principle to the desktop version but many of the preferences available on the desktop version have no effect in mobile. This one I only tested on one site, but it seems to work.''

Error message:- java.rmi.RemoteException: Unexpected fault was returned by

Hi All,
When we trying to fetch documents from plum tree portal using a java api, we are getting below error message. please can anyone guide us,
error message:- java.rmi.RemoteException: Unexpected fault was returned by the server (faultcode: Server.userException, faultstring: org.xml.sax.SAXParseException: Content is not allowed in prolog.)
thanks in advance
Srinivas

Cross-posted:
error message:- java.rmi.RemoteException: Unexpected fault was returned by

K9AGM3 Mobo PS2 Mouse POST Error Message

Similar Messages

Maybe you are looking for