K9n neo 1.0 problems with compatibility of memory?

i have a k9n neo 1.0 with bios version 1.3 and linux ubuntu Linux ubux2 2.6.20-16-generic #2 SMP Tue Feb 12 05:41:34 UTC 2008 i686 GNU/Linux
cpu AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
2 gb of ram KVR667D2N5K2/2G 2GB 667MHz DDR2 Non-ECC CL5 DIMM (Kit of 2) (installed in dimm1 and dimm2
hard disk sata western digital WDC WD3200JS-00P
ide DVD reader HL-DT-ST RW/DVD GCC-4522B
video pcie G70 [GeForce 7300 GT]
with that configuration works smooth (the only detail with that configuration is a message in the startup from bios about the cpuid )
My problem began when i try to add 2gb to the motherboard, i search a list of compatible memory and... i choose 2 of KVR667D2N5/1G 1GB 667MHz DDR2 Non-ECC CL5 DIMM, and i try of put them in dimm2 and dimm3, results? some times can't boot my hard disk give errors, some times i can startup but when i start to launch programs i get disk errors, and just stop of respond, i need reboot.
1. i run memtest86 and don't report any error.
2. i take off the 2 gb KVR667D2N5/1G and all is fine again.
3. i put the original 2gb KVR667D2N5K2/2G but now in dimms3 and dimm4, and... seem works fine for a minutes, but same problem in some moment sda stop to respond and reboot again.
4. i remove the original memory and put 2gb KVR667D2N5/1G in dimm1 and dimm2, same results
5. i back to the original configuration, just 2gb KVR667D2N5K2/2G in dimm1 and dimm2 and i working without problems.
* note in every step i reset to the optimal values.
first i was thinking that my motherboard have sockets dimm3 and dimm4 damaged, but after of all that i don't know
any suggestion?
Thank's in advance

i am not an expert on your motherboard but to be honest first you must download the manual for your motherboard and go through it thoroughly and then look at the memory selection and type and make sure you have the right one in the right slot. you can also go to crucial memory and test your current memory with their software. although in the bios section i wonder if you have got your setting correct. if not sure just try enable those which are currently disabled and see the difference.sometimes you just have to try and error method as the manual is very basic and gives very little information. good luck

Similar Messages

Any problems with compatibility of update iTunes with OSX 10.7.5

Has anyone noticed any problems with compatibility of updated iTunes with OSX 10.7.5?

Okay. At the beginning of this discussion I was on 6.0.1. However, I responded to an update since then and since I didn't realize 6.0.2 wasn't compatible with Lion I responded and updated.
Now, with your message, a clean 6.0.1 installation sounds like a great idea. However, I've downloaded it from your link and when I install just from the install program, I still have an "About Safari" showing 6.0.2. I then tried setting up a separate Safari folder in the Applications folder and installed into that. I only got some Safari-associated folders and items there but no new Safari app icon... and the Safari 6.0.2 icon (which I hadn't gotten rid of since I don't want to lose my bookmarks, etc... want to transfer those once the 6.0.1 is there) is still there.
All the hanging-up problems are still happening, btw... and probably even worse. Right now I'm using Camino, a good browser but Safari has features I'd like to get back to... got Firefox, too, and like it, but I've got it set up for other family members to use and Safari here for me.
Any help on how to get 6.0.1 installed again without losing bookmarks greatly appreciated.

Problems with adding 1Gb memory to 848P Neo

I have had an 848P Neo since February now, with only 512Mb, but seeming as some games and applications I have been running are now taking 512Mb as a minimum, I decided to buy another stick of 512Mb PC2700 333Mhz DDR to take me up to 1Gb. But I struck a problem.....
With both sticks of memory in the machine, the computer fails the memory 'POST' test on reboots (not boots from power off, but when something makes it reboot. ie: BIOS or WinXP). When I do get into Windows, the Core Centre utility acts weird too. It locks up the whole machine, whether you are trying to 'restore' it, or adjust the FSB. It won't even shut down or Ctrl-Alt-Del with it (this is surprising as I have never had to turn off or reset it via the case, as all lock ups have been recoverable).
With either of the sticks in on their own, it works fine. eg: Stick 1 in DIMM 1 or 2/Stick 2 in DIMM 1 or 2. But when they both go in at the same time I get problems. Both sticks are of the same CL according to the Everest System utility.
I have been getting help from my magazines forum, but they seem to have hit a dead-end too. Thread is here.
I would also like to add that I don't think it can be because one stick is Kingston (I think) and the other PNY, as I took the Kingston out of my second comp (same memory) and it still wouldn't work.
I hope I can get this fixed soon.

How do you up the 'VDIMM'? lol.
I don't think it is a mixing prob, as I took the other stick from my other computer (all the numbers on the memory chips are exactly the same, except it is a green stick instead of blue), and the problem still existed.

First time user..problem with compatibility mode

Old problem with a twist. Like others have experienced, when I open itunes I get a message that reads itunes.exe is set to run in compatibility mode and I need to turn it off. The problem I have is that I DON'T FIND a compatibility option when I right-click on Properties. Any ideas???

Refer to this article:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489

K8N Neo (MS-7030) problem with Gigabyte 6600

Hi,
I got a problem with my K8N Neo (MS-7030) and Gigabyte 6600 together.
I just tried to upgrade my system with the following components:
PNY 5700LE 128M -> Gigabyte 6600 256M (GV-N66256DP)
Onboard sound -> CreativeLab SB Audigy 2 ZS Gamer
Here is my order of installation:
1. Win XP with SP2
2. Chipset driver 5.10 (5.11 crashed during installation)
3. ForceWare 81.98 (I tried 77.72 from Gigabyte as well)
The system went blank during (3) and never comes back. In the last 3 days, I must repeated the above procedures over 20 times. I tried combinations of diffierent version chipset driver with forceware, but still no luck.
Audigy2 was sitting in the middle PCI before. However, I encounter a few system lockup during the first 10 trials, then I found a post say Audigy 2 should reside in the orange, or the one far away from AGP, PCI slot. Things seems better after this change.
More detail about my system:
MB: K8N Neo (MS-7030) BIOS is the latest version, 1.9.
RAM: Corsair Value 2 x 512MB PC3200
PS: Antec 380W
Video: Gigabyte 6600 256M (GV-N66256DP)
Sound: CreativeLab SB Audigy 2 ZS Gamer
Thanks
Alex

Hi,
My PSU is Antec True3808 (5V/35A 12V/18A 3.3V/28A)
I forgot to mention before. The CPU is AMD Athlon 64 2800+.
Also, I had enough of installation for now. I pulled the new 6600 and put the old 5700LE back in. Now, I installed everything without a problem.
Could it be not compatible? PSU issue? Or something else?
Any suggestion?
I appreciate any help.
Alex

Msi k9n neo v2 display problems

having problems with this motherboard it doesnt appear to have the vga port on the back of the board, and when trying to boot with a graphics card and the monitor connected still dont get andy visual display at all.
specs are amd xp3800+ cpu
2gb ocz ddr 800mhz ram
msi k9m v2 moboard
eye-t 550w psu
asus 7600 gte gfx card

Hello!
Are there any unused so called stand-offs/spacers/distanser behind the motherboard and the case?
Use a single stick, in the slot closest to the processor.
"That PSU is actually an Aspire 500watt power supply rebadged as 550watts. Has only 25 amps on its +12V rail." http://answers.yahoo.com/question/index?qid=20080913152438AAO3iEt
Suggests you try another one, of some quality.

A problem with compatibility with Office 2010 files

I have a problem with opening downloaded files xlsx, docx, etc. by default downloadmanager of Firefox. I have installed Office 2010 (previously had 2007). Firefox extension detects these files as zip archives. (when I was in 2007 there was the problem).
Change the default application for the file (for example, the EXCEL xlsx Office14 directory ...) to change the default application for zip files and other archives (in my case, I installed 7zip 64bit)
Deleting the file mimeTypes.rdf does not help
Operating System: Windows 7 Professional 64bit.

The Live Http response clearly shows that the server sends this file as a ZIP archive (application/zip)
* Content-Type: application/zip; charset=binary
In such a case there is not much to do about this apart from contacting the website and ask them to change the content type to one that is more appropriate or maybe better leave out that specific header as there is also a Content-Disposition header and Content-Transfer-Encoding header send.
*Content-Disposition: inline; filename="Ap20- praca_telefony.xlsx"
<pre><nowiki>Content-Disposition: inline; filename="Ap20- praca_telefony.xlsx"
Content-Description: Ap20- praca_telefony.xlsx
Content-Length: 25907
Content-Transfer-Encoding: binary
Connection: close
Content-Type: application/zip; charset=binary</nowiki></pre>

K9N SLI-F V2 problem with 1TB HD in bios

Hello all.
I am to build a new system. All parts are new just purchased over the net.
MB part# 601-7390-010B0806405072 with AMD 6000+ CPU
HD is Samsung HD103UJ
on POST it read A7390NMS Bio version 1.1
On the Bios it sees the Samsung HD but only as 8GB in size.
I checked the MSI website for bios update and for this MB 1.1 is the current version.
Tried different SATA cable, power cable and different SATA slots
Called MSI tech support in USA and was told MSI only tested SATA drives up to 500GB. But he said there should be no reason why it wouldn't work with 1TB.
I only have this one HD right now, so I can't even install Window XP.
Any suggestions or should I just go return the 1TB HD and get a 500GB version?

Quote from: debpie on 08-December-08, 04:19:28
There is only 1 set of jumper on that Samsung HD and it used for setting master or slave for PATA
Right, but this is SATA drive, not PATA. Samsung isn't going to 'accidentally' put Master/Slave jumpers on a SATA drive.
Hard drives attached via USB mass storage controller specification do not depend on BIOS INT13 geometry translation support, except when booting from the USB storage drive or accessing it in a non-USB aware environment (e.g. DOS). In USB-aware environment (e.g. any modern OS), drive capacity support is handled entirely by the embedded USB-ATA/ATAPI bridge controller and firmware located in the USB enclosure. Ergo, nothing can be inferred about the MSI BIOS from the drive's behavior in an external USB enclosure, unless you attempted to boot from it or access it in DOS.
The drive's behavior in an external USB enclosure could suggest one of three possible things:
- the drive is defective
- the drive has buggy firmware
- the embedded controller or firmware in the external USB enclosure has some problem with drives this large
However, since the drive is acting up in BOTH scenarios, it points to the drive as the problem. Samsung drives are developing a reputation for having buggy firmware, particularly models over 750GB, which lends additional support to the drive as the most likely suspect. Test the drive by connecting it to another SATA controller, not USB or Firewire. Samsung's ES-Tool Utility may also be useful here:
http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html

Problem with JTree and memory usage

I have problem with the JTree when memory usage is over the phisical memory( I have 512MB).
I use JTree to display very large data about structure organization of big company. It is working fine until memory usage is over the phisical memory - then some of nodes are not visible.
I hope somebody has an idea about this problem.

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

Problem with out of memory and reservation of memory

Hi,
we are running a very simple java program on HP-UX that do some text substitution - replacing special characters with other characters.
The files that are converted are sometimes very large, and now we have come to a point where the java server doing the work crashes with "Out of memory" message. (no stack) when it process one single 500MB large file.
I have encountered this error before(with smaller files) and then I have made the maximum Heap larger, but now when I try to set it to 4000M
i get the message:
"Error occurred during initialization of VM
Could not reserve enough space for old generation heap"
When it crash with this message, my settings are:
-XX:NewSize=500m -XX:MaxNewSize=1000m -XX:SurvivorRatio=
8 -Xms1000m -Xmx4000m
If I run with Xmx3000m instead the java program starts but I get Out of memory error like:
java.lang.OutOfMemoryError
<<no stack trace available>>
The GC log file created when it crashes looks like:
<GC: -1 31.547669 1 218103808 32 219735744 0 419430400 0 945040 52428800 0 109051904 524288000 877008 877008 1048576 0.934021
>
<GC: -1 62.579563 2 436207616 32 218103808 0 419430400 945040 944592 52428800 109051904 327155712 524288000 877008 877008 1048
576 2.517598 >
<GC: 1 65.097909 1 436207616 32 0 0 419430400 944592 0 52428800 327155712 219048400 524288000 877008 877008 1048576 2.061976 >
<GC: 1 67.160178 2 436207616 32 0 0 419430400 0 0 52428800 219048400 219048400 524288000 877008 877008 1048576 0.041408 >
<GC: -1 128.133097 3 872415232 32 0 0 419430400 0 0 52428800 655256016 655256016 960495616 877008 877008 1048576 0.029950 >
<GC: 1 128.163584 3 872415232 32 0 0 419430400 0 0 52428800 655256016 437152208 960495616 877008 877008 1048576 3.971305 >
<GC: 1 132.135106 4 872415232 32 0 0 419430400 0 0 52428800 437152208 437152208 960495616 877008 876656 1048576 0.064635 >
<GC: -1 256.378152 4 1744830464 32 0 0 419430400 0 0 52428800 1309567440 1309567440 1832910848 876656 876656 1048576 0.058970
>
<GC: 1 256.437652 5 1744830464 32 0 0 733282304 0 0 91619328 1309567440 873359824 1832910848 876656 876656 1048576 8.255321 >
<GC: 1 264.693275 6 1744830464 32 0 0 733282304 0 0 91619328 873359824 873359824 1832910848 876656 876656 1048576 0.103764 >
We are running:
java version "1.3.1.02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1.02-011206-02:17)
Java HotSpot(TM) Server VM (build 1.3.1 1.3.1.02-JPSE_1.3.1.02_20011206 PA2.0, mixed mode)
We have 132GB of physical memory and a lot of not used Swap space, so I cant imagine we have a problem with that.
Can anyone please suggest what to do proceed troubleshooting or to change some settings? I'm not into this Java really so I really need some help.
Usually the java program handles thousands of smaller files (around 500 KB - 1 MB sized files).
Thanks!

You have a one to one mapping? Where one character is replaced with another?
And all you do is read the file, replace and then write?
Then there is no reason to have the entire file in memory.
Other than that you need to determine if the VM (which is not a Sun VM) has an upper memory bound. That would be the limit that the VM will not go beyond regardless of memory in the system.
We have 132GB of physical memory and a lot of not used Swap spaceOne would wonder why you have swap space at all.

Slow system – problem with OS, software, memory, hard drive?

I am running a MacBookPro5,3 (Intel Core 2 Duo – 2.8 GHz, Memory = 2 x 4 GB, Hard drive = NVidia 500 GB - 100GB of which is free space), using Mac OS X 10.6.3.
I was running 10.6.6. Then attempted a software update to 10.6.7 and the system essentially stopped working, Was able to back up data using target disk mode, and then reinstalled 10.6.3 using a purchased snow leopard DVD (had lost the disk that came with the computer). Worked for a while but have been having issues with increasingly long and frequent system slow downs (spinning beach ball). Recently attempted another system update, and the update failed and wasn't able to do anything. Used the 10.6.3 dvd and did a disk utility check – it initially said there was a problem with the hard drive – but on another restart from the DVD this issue disappeared (but still no working OS). Attempted connection of my computer to another laptop using target disk mode – this failed to show the target hard drive and only showed the dvd which was in the computer booted up in target disk mode.
At this point rebooted using the DVD and was able again to install system 10.6.3. However, there are still occasions of sporadic slow-downs associated with specific applications (spinning beach ball for anywhere from 5 – 120 sec). Ran disk utility from the DVD again – states that the permissions and the hard drive is OK. Also, ran a memory test (using Rember) which stated that everything was fine (although the test took nearly 2 hours to run and was punctuated by much spinning beach ball activity).
At this stage i am not sure whether I have a problem with memory, the hard drive, the OS or the software. Clearly something is not right – are there any other options to test my system (since I don't have the original dvd – I haven't been able to run a system hardware test) - other third party options?
Thanks in advance for any advice, and apologies for long post.
Rob

Sounds like a failing hard drive or SATA controller. It's not clear whether you have a backup of your data. If not, you should remove the hard drive from the machine and install it an external enclosure or dock, then back it up using another Mac. Then take the unit to an authorized service outlet for testing.

Oracle 11g problem with creating shared memory segments

Hi, i'm having some problems with the oracle listener, when i'm trying to start it or reload it I get the follow error massages:
TNS-01114: LSNRCTL could not perform local OS authentication with the listener
TNS-01115: OS error 28 creating shared memory segment of 129 bytes with key 2969090421
My system is a: SunOS db1-oracle 5.10 Generic_144489-06 i86pc i386 i86pc (Total 64GB RAM)
Current SGA is set to:
Total System Global Area 5344731136 bytes
Fixed Size 2233536 bytes
Variable Size 2919238464 bytes
Database Buffers 2399141888 bytes
Redo Buffers 24117248 bytes
prctl -n project.max-shm-memory -i process $$
process: 21735: -bash
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 64.0GB - deny
I've seen that a solution might be "Make sure that system resources like shared memory and heap memory are available for LSNRCTL tool to execute properly."
I'm not exactly sure how to check that there is enough resources?
I've also seen a solution stating:
"Try adjusting the system-imposed limits such as the maximum number of allowed shared memory segments, or their maximum and minimum sizes. In other cases, resources need to be freed up first for the operation to succeed."
I've tried to modify the "max-sem-ids" parameter and set it to recommended 256 without any success and i've kind of run out of options what the error can be?
/Regards

I see, I do have the max-shm-ids quite high already so it shouldn't be a problem?
user.oracle:100::oracle::process.max-file-descriptor=(priv,4096,deny);
process.max-stack-size=(priv,33554432,deny);
project.max-shm-memory=(priv,68719476736,deny)

I have problem with Ultra Secure Memory Key Login Software (as non admin) hdlSrv.exe

I have problem with a memory key lenovo 1g. Here is a Company and the Users can't be Admin. So We have a big problem. I download "KeySafe II and MyKey in Non-Admin Mode" but its not run. I found in Lenovo pag, i installed as said in the instructions but i repeat I return to be normal user and couldn't use it in mode User! I trying and i saw that the service hdlsrv be on and run! but i can't. So ¿are there an archive that i can use and can use it this pendrive in Non-Admin mode?
We have SO Wxp
KeyLock : Ultra Secure Memory Key Login Software 1.0.3.6
Fru 45j5923
Lenovo 1g
Please!!! help Mee!!
thank u!

Jan 2, 2008 11:49:35 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Jan 2, 2008 11:49:35 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 734 ms
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
Jan 2, 2008 11:49:35 AM org.apache.catalina.realm.JDBCRealm start
SEVERE: Exception opening database connection
java.sql.SQLException: oracle.jdbc.driver.OracleDriver
     at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:684)
     at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:758)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1004)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Jan 2, 2008 11:49:36 AM org.apache.catalina.core.StandardContext resourcesStart

Problems with built-in memory

Hi everyone!
I have a blackberry torch 9810, 7.1 bundle.
I have a problem with my built in memory. ever since I lost my memory stick, ii started using my built in memory since it's a 6.2 GB memory. so ii once plugged my bb into my laptop, and when unplugged, everything just disapeared! picture, music, recordings, everything. It wouldn't apear but ii know it's there because when ii plug into a laptop would say 2.3 GB used. Ii security wiped my phone once and it started working perfectly again. then the problem came back again after a while! How do fix this problem?

This only happens every-time you connect your blackberry to your laptop everything disappeared correct?

Problem with my ram memory

I got 3 gigs of ram and after some of memory burn I'm able to have only 2 gigs of these ram. But today I try to find why. And after a multiples tests I found that on my riser A the slot 2 is lighting on but I try to put my +riser B+ intead of my +riser A+ at the place of my +riser A+ and the same problem arrive. So, after my test I found it's probably my motherboard but I found my +riser B+ works well and I put these configuration and I found my 3 gigs:
*_Riser A_*: nothing
*_Riser B_*:
Slot 1= 1 gigs
slot 2= 1 gigs
Slot 3= 512 mb
Slot 4= 512 mb
So my question is: I know that's not the configuration for the ram memory, it's suppose to be:
*_Riser A_*:
Slot 1= 1 gigs
slot 2= 1 gigs
Slot 3= nothing
Slot 4= nothing
*_Riser B_*:
Slot 1= 512 mb
slot 2= 512 mb
Slot 3= nothing
Slot 4= nothing
but can I have any problem with my new configuration like my ram memory are not working like they should or anything like this?
Thank's!

No, if it is the slot, there is nothing you can do that I know of - I believe the slots are part of the logic board (not sure on a laptop, but they are on an iMac) - to find out, do take it to an Apple store; the Genius Bar advice and diagnosis is free. At least you would know if it is the slot and how much it would cost to repair or replace it. Here is some info that may help:
https://discussions.apple.com/thread/5279862
http://support.apple.com/kb/PH14206

K9n neo 1.0 problems with compatibility of memory?

Similar Messages

Maybe you are looking for