K9N Neo-F (non-sli) onboard sound card cant install winxp sp2

K9N Neo-F (non-sli) onboard sound card cant install winxp when ı install driver I see this device cant start (code 10)but first install working but now ıcant install sound device pls help me...
K9N Neo-F non sli nforce 550  motherboad
Asus X550HM pci-E vga card
Aopen HB600 400w power
Veritech 512 mb 800 mhz single ram
samsung 160 gb&250gb sata2 hdd   

Tried to uninstalled those driver again. ALso what NVidia driver are you using? Tried to used the latest drivers from Nvidia. What are the rails for +12V PSU in the labels? Gd luck.

Similar Messages

  • Unable to make microphone to work on NVIDIA MCP55 onboard sound card

    Hello.
    Some time ago, I bought a nice HP xw9400 Workstation (with Dual Core AMD Opteron  2216) from Germany. Despite it's starting to become old by today's standards for some stuff like gaming, it's still quite okay to use and the SAS HDD makes it boot fastly. And it has one of the best cases, you can plug PCI/PCIe/PCI-X cards very easily and it's very nice to change or add HDDs. Maybe I'll upgrade the CPUs (I can upgrade the bios and it seems it can support better CPUs) if I find them on eBay or other place.
    I have less problems with Arch than the rest of distributions, but I still have weird issues. Despite my computer hardware is somewhat old, I still experience weird problems everywhere (it seems I have some kind of weird "luck").
    I have problems using my microphone under Arch with "NVIDIA Corporation MCP55 High Definition Audio (rev a2)" onboard sound card , here is the relevant info.
    http://www.alsa-project.org/db/?f=5907a … f5d2b9d88c
    $ ls -l /dev/snd
    total 0
    drwxr-xr-x 2 root root 60 Dec 12 00:00 by-id
    drwxr-xr-x 2 root root 80 Dec 12 00:00 by-path
    crw-rw----+ 1 root audio 116, 7 Dec 11 23:58 controlC0
    crw-rw----+ 1 root audio 116, 9 Dec 12 00:00 controlC1
    crw-rw----+ 1 root audio 116, 6 Dec 11 23:58 hwC0D0
    crw-rw----+ 1 root audio 116, 5 Dec 12 01:34 pcmC0D0c
    crw-rw----+ 1 root audio 116, 4 Dec 12 02:33 pcmC0D0p
    crw-rw----+ 1 root audio 116, 3 Dec 11 23:58 pcmC0D1p
    crw-rw----+ 1 root audio 116, 2 Dec 12 01:28 pcmC0D2c
    crw-rw----+ 1 root audio 116, 8 Dec 12 01:43 pcmC1D0c
    crw-rw---- 1 root audio 116, 1 Dec 11 23:58 seq
    crw-rw----+ 1 root audio 116, 33 Dec 11 23:58 timer
    % arecord -l
    **** List of CAPTURE Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: ALC262 Analog [ALC262 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: NVidia [HDA NVidia], device 2: ALC262 Alt Analog [ALC262 Alt Analog]
    Subdevices: 2/2
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    card 1: Camera [USB Video Camera], device 0: USB Audio [USB Audio]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    % arecord --list-pcms
    null
        Discard all samples (playback) or generate zero samples (capture)
    default:CARD=NVidia
        HDA NVidia, ALC262 Analog
        Default Audio Device
    sysdefault:CARD=NVidia
        HDA NVidia, ALC262 Analog
        Default Audio Device
    front:CARD=NVidia,DEV=0
        HDA NVidia, ALC262 Analog
        Front speakers
    surround40:CARD=NVidia,DEV=0
        HDA NVidia, ALC262 Analog
        4.0 Surround output to Front and Rear speakers
    surround41:CARD=NVidia,DEV=0
        HDA NVidia, ALC262 Analog
        4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=NVidia,DEV=0
        HDA NVidia, ALC262 Analog
        5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=NVidia,DEV=0
        HDA NVidia, ALC262 Analog
        5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=NVidia,DEV=0
        HDA NVidia, ALC262 Analog
        7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    default:CARD=Camera
        USB Video Camera, USB Audio
        Default Audio Device
    sysdefault:CARD=Camera
        USB Video Camera, USB Audio
        Default Audio Device
    front:CARD=Camera,DEV=0
        USB Video Camera, USB Audio
        Front speakers
    surround40:CARD=Camera,DEV=0
        USB Video Camera, USB Audio
        4.0 Surround output to Front and Rear speakers
    surround41:CARD=Camera,DEV=0
        USB Video Camera, USB Audio
        4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Camera,DEV=0
        USB Video Camera, USB Audio
        5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Camera,DEV=0
        USB Video Camera, USB Audio
        5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Camera,DEV=0
        USB Video Camera, USB Audio
        7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Camera,DEV=0
        USB Video Camera, USB Audio
        IEC958 (S/PDIF) Digital Audio Output
    (I was unable to make the microphone on the usb webcam to work, but that's another issue I'll ask in a separate forum thread...)
    % head -n 1 /proc/asound/card0/codec*
    Codec: Realtek ALC262
    I found this in Gentoo forums, very similar issue and a fix that don't works (see in a bit further)
    http://forums.gentoo.org/viewtopic-t-88 … art-0.html
    And this...
    http://ubuntuforums.org/showthread.php?t=1672571
    http://ubuntuforums.org/showthread.php?t=1475588
    https://bugs.launchpad.net/ubuntu/+sour … bug/577178
    http://www.linuxforums.org/forum/ubuntu … rking.html (2007 forum post, but very similar)
    http://lists.opensuse.org/opensuse-bugs … 02583.html (2009)
    https://bugzilla.redhat.com/show_bug.cgi?id=522101 (2009, closed in 2011)
    https://bugzilla.novell.com/show_bug.cgi?id=474383
    -> http://lists.opensuse.org/opensuse-bugs … 02583.html (it seems the bug tracker works quite bad or there's some issue looking at that issue, so here's the mailing list message about it)
    I also tried create  /etc/modprobe.d/alsa-base.conf and add the following line to it...
    options snd-hda-intel model=6stack
    And no luck!  I tried it and still appear both "Rear Mic" and "Front Mic". I'll provide a screenshot later.
    I'm starting to understand this, maybe it can help me...
    http://alsa.opensrc.org/Record_from_mic
    I tested both sound hardware by using arecord and audacity, no luck at all
    % arecord -Dhw:1 --dump-hw-params
    Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
    HW Params of device "hw:1":
    ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
    FORMAT: S16_LE
    SUBFORMAT: STD
    SAMPLE_BITS: 16
    FRAME_BITS: 16
    CHANNELS: 1
    RATE: [8000 48000]
    PERIOD_TIME: [1000 32768000]
    PERIOD_SIZE: [32 262144]
    PERIOD_BYTES: [64 524288]
    PERIODS: [2 1024]
    BUFFER_TIME: (1333 65536000]
    BUFFER_SIZE: [64 524288]
    BUFFER_BYTES: [128 1048576]
    TICK_TIME: ALL
    arecord: set_params:1233: Sample format non available
    Available formats:
    - S16_LE
    % arecord -D hw:1 -f S16_LE myfile.raw
    Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
    arecord: pcm_read:2031: read error: Input/output error
    % arecord -D hw:1 -f S16_LE -V myfile.raw
    Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
    arecord: pcm_read:2031: read error: Input/output error
    % arecord -D hw:1 -f S16_LE -V -r48000 myfile.raw
    Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
    arecord: pcm_read:2031: read error: Input/output error
    % arecord -D hw:1 -f S16_LE -r48000 myfile.raw
    Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    arecord: pcm_read:2031: read error: Input/output error
    % arecord -D hw:1 -f S16_LE -r44100 myfile.raw
    Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
    arecord: pcm_read:2031: read error: Input/output error
    % arecord -D hw:1 -f S16_LE -r16000 myfile.raw
    Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono
    arecord: pcm_read:2031: read error: Input/output error
    (I tried them with my user and root, same results)
    I had an Sound Blaster Audigy 4 Pro, but removed it to see if there was some problem. I'm still unable to use my Microphone even on onboard audio hardware. I'll try to use it once I have the microphone working
    Regards.
    Last edited by timofonic (2013-12-12 04:11:57)

    Sorry, that was wrong, I meant
    arecord -l
    Have you tried making a virtual loopback device like above and using
    arecord -vv -fdat out.wav
    You should see the #### fluctuate as you speak into the mic. If not, then unmute and turn up your mic in alsamixer. That loopback device will allow you to capture your sound card and hear it at the same time. Another way to do it is to use a jumper from line out to line in on your sound device. You won't be able to hear it while you record though.
    If your sound device works, then you can capture what's going through it. You'll need to determine which vitual device your mic is.
    Example
    arecord -l
    **** List of CAPTURE Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: NVidia [HDA NVidia], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
    Subdevices: 8/8
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7
    card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
    Subdevices: 8/8
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7

  • How do I disable the onboard Sound card in BIOS on the Equium A200

    I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?

    Hi
    You cannot disable it in the BIOS.
    If you want to disable the sound card you can do this in the device manager!
    cheers

  • How do I disable the onboard sound card in BIOS on the Equium A200 PSAE2 ?

    I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?

    Do not post twice!
    Follow this
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99828&

  • Hp pavillion dv9000 onboard sound card/speakers not recognized

    I have an old HP Pavillion dv9000, it has been with me for a while.  I took it with me to Iraq back in 2007-2008 and it has a lot of sentimental value to me.  I don't currently have the funds to replace it, and it still works quite well for my needs as a full-time student; however, last week I moved into a new apartment and discovered that for whatever reason it no longer recognizes its onboard sound card or speakers.  Additionally, sound no longer works through the headphones, and I've also attempted to update drivers but it made no difference.  There is a red circle x over the speaker icon in the tray and I recieve a "No Audio Output Device is installed" message when I scroll over it.  I'm running on Windows Vista and the speakers worked fine just last week.  Lastly, I attempted to find the sound card myself to see if perhaps it needed reseating, but I had no idea where to look.  Any help to resolve this issue would be greatly appreciated.

    Hello fredo5,
    Please take a look at the troubleshooting steps in this document, and let me know if it helps resolve your sound issues.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • KT3-Ultra Onboard Sound Card

    Does the KT3-ultra's onboard sound card support eax
    or dolby surround? Cos I can't seem to get any games
    to use the left/right rear speakers at all.
    Such games include warcraft 3 and counterstrike.
    Running the latest drivers from avance, and using
    windows 2000 Professional.
    Athlon XP1800+
    MSI KT3 Ultra
    256 MB DDR266 RAM
    MSI Geforce2 Ti 64mb DDR
    Surecom 100 Mbps
    Seagate 40GB 7200rpm
    Aopen 52x

    Thanks for the speedy reply guys.
    What the question initially intended to ask was if
    the onboard sound card allowed me to play games
    with full surround sound support using eax/dolby.
    I assume the answer to this question is no.
    With regards to playing DVDs, yes I can get the 6
    channel sound, and the speaker test in the tray
    confirms this.
    But as I don't really watch DVDs on my computer,
    and use it more for games and work, I assume I
    have to get a SB Live or some sort to actually get
    eax/dolby support within games. Is this correct?
    Thanks again.
    Athlon XP1800+
    MSI KT3 Ultra
    256 MB DDR266 RAM
    MSI Geforce2 Ti 64mb DDR
    Surecom 100 Mbps
    Seagate 40GB 7200rpm
    Aopen 52x

  • Nforce 4 platinum SLI onboard sound problems

    I have recently bought the nforce 4 Platinum SLI motherboard with onboard sound blaster live 24bit, but when i try to fully utilise it in games like Halo, the sound laggs, only partially plays the sound effects. The sound is fine in all other things like when playing music, it is just when i turn on the hardware acceleration in the game audio options. I've checked for conflicts in device manager and re-installed the latest drivers. I read about the PSU problem with the -5V rail, but my PSU is 24 pin and has the correct rail, so it isn't that.
    It's almost like the sound card is not getting enough system resources to be able to fully process the sounds.
    It's driving me nuts, can anyone help with any suggestions.
    Cheers, Jonny

    I tried lowering the acceleration as well but it didn't affect it. When i took it down to basic acceleration, i was then unable to turn on the hardware accelaration inside the game which is what causes the sound to lagg.

  • Pblm with onboard sound card

    I have a KT4 Ultra, with ddr 1go, a 450W power for about 6 hard disks on ide 1, 2 and a pci card, and I'm alwaus using the onboard soundchip c-media 3728. I dunno why, but since a few weeks, while no change has been made to my pc hardware, I began to have this annoying pblm: when I'm doing heavy reading/writing tasks on my hard disks on the pci card, while playing mp3 or divx on my ide1 hdd with any software player, then the sound is continuously very jerky. I have win xp pro sp1+rollup, the latest via4in1 driver for my motherboard, and the latest one for the integrated sound card.
      Anybody knows how to solve it?

    Well yes my ide1 and 2 are in UDMA mode.

  • Asus A8N-SLI Premium sound card probl

    I have the SB Audigy2....does anyone know if this card will work on this MB. For some reason I can't get the MB? to even detect the card....Mike

    Yes it shows the question marks in the system control pansl. But if I select reinstall drivers it searchs the disk it still won't let the drivers go in. At first I thought I had a bad MB slot or the MB. was bad so I sent it back. They sent me another and same problem. I also brought another MB thinking it was that style and same thing happened. On my old system all I did was install the card slip in the disk and install what I wanted from the disk. When I install the disk now all it will let me do is pick what program I want to install to listen to what is on the CD. The sample programs.. I must be stupid here or something because I can't for the life of me figure out why it won't install. Out of all the computers I have built this is the first time I have seen this happen. That is why I wanted to know if someone else has this problem on the Asus MB. When I contacted Asus support he said after three MB I might wanna sheck with SB to see why this is happening or if this sound card will work with the MB. There is no way three boards are bad..lol....going nuts, Mike

  • Big bang Xpower SATA 1-6 problems and Sound Card wont install.

    My new system came in the mail today and I put it all together only to find out that my Hard Drives and DVD drive would not be recognized from time to time. The BIOS would sometimes not detect the drives and sometimes it would. I finaly was able to get windows 7 installed only to have the compter freez on me. (I belive the freez was due to the drives being dropped, cause I could still move the mouse around but the rest was froze) I also could not get the included sound card to detect, I had it plug in to the spot the manual says to have it and durring my many reboots(due to the drives dissapearing) one time the plug and play wizzard showed that the card was detected but befor I could install the drivers the cpu froze again. I am useing the system now via the 2 SATA 6 ports/ ports 7/8. the computer runs fine on those 2 ports. One of my questions is the are the 2 6gb/s SATA ports controled by a differnt controler then the 3gb's SATA ports? Im just trying to understand why those work and the others dont. What could be damaged on the board that would cause the 3gb/s SATA ports to not function and drop the drives connected to them at random? Also the sound card not detecting could that have some tie in to the SATA problme? The sound card uses PCIE port 1 to funtion but I have no problems runing my video card and its on a PCIE slot. Maybe the sound card is controlled by the same controller used for the SATA ports that are not working??? Let me know what you guys think. I have a replacement board on the way but I would like to know for sure that its not something else causeing my problem. Sorry for the spelling errors/typos, its late and Ive been fighting with this all day.
    The new parts I got today are as follows
    MSI big bang Xpower
    OCZ fatality DDR3 6Gig 1600 @ 7 8 8 26
    Intel i7 930
    Corsair H50
    The existing parts from my old system
    OCZ Summit 120gb ssd
    Samsung DVD SATA drive
    ATI 4890 XFX card
    Antec 850 tru power
    Antec case as well

    Quote
    I am using the 6.0 ports as we speak with 3.0 and 1.5 devices and its working fine. It even detects the speeds of the drives upon startup. Are you mistaken on the backward compatibility with this chipset.
    Sometimes we can't believe some of the reviews & articles we read. I'll research that a bit more too.
    I currently have a ticket in with Tech Support concerning two things, one the Quantum Wave card sound crackling like a walk on corn flakes. Also trying to get confirmed if the PCI-E slots E2 thru E7 support anything other than VGA's. Faulty audio controller maybe. Tested Creative X-Fi Fatal1ty Champion & it crackles too. Not so sure W7 64 bit doesn't have something to do with it.
    Quote
    "The new 6.0 spec also offers enhancements to support multimedia applications, enhancements for increased functionality, and is even backwards compatible with earlier SATA implementations 1.5 and 3 Gb/sec."
      That's what I get for reading the wrong information! I should have read this one first!

  • MSI P45 Neo-F, GeForce GTX 260 graphic card upgrade (Install resolved)

    Greetings,
    We recently built up starting from an MSI P45-F motherboard and running an Intel Core 2 Duo Processor on XP (we did not choose XP-64 waiting on Windows 7).
    We are attempting to upgrade the graphic card to the PCI express with a GeForce GTX 260 and are encountering a driver download error from Nvidia.
    Problem/Issue: While driver software is downloading, mid-way the screen goes black/blank and a single underscore cursor appears (remains indefinitely).
    We believed it could be a power supply issue as we are running an OCZ tech 600W stealth stream (we are certain there is sufficient amp), but clearly we must disable or uninstall the on-board graphic card (which may be causing a drain?).  We are looking under the Device Manager and unable to identify which is the actual on-board graphics in order to disable. 
    I have attempted to contact MSI directly; however there is a communication problem on my part since I have no idea what I'm doing ($40 bucks to have the card professionally installed is looking like a bargain right now, but think of the fun I will have with the Crysis expansion set on ULTRA).
    One side bar question, not important: I'm running 4 GHz RAM, but only 3.205 is appearing? what is the missing RAM being allocated to at idle (is that to the graphics?)?
    Any assistance you could offer would be greatly appreciated.
    Jay

    Greetings,
    Well - initially the lock up would occur when we started running the Nvidia driver download software.   After booting and performing a system restore (the normal OS load locked up, so we had no choice but to back date).  We then downloaded the driver from Nvidia on to a disk from another computer and started up the upgrading computer in safemode and inserted the disk, same error occurred - halfway through the install download the screen goes blank and stays with under score cursor 20+mins.
    We called Nvida and they claimed there may be may be driver conflict, so we removed all the drivers (with a driver sweep software-we wiped out allllll of the drivers, no problem) and loaded all drivers fresh and brand new. 
    Still same error occurred; We attempted to load the nvidia driver from the website -
    Carefully confirming that
    1.) we have sufficient amps (we calculated 46amps) to cover our build up. 
    *EDIT: IT WAS ACTUALLY 18amps (ALWAYS DOUBLE CHECK YOUR CALCULATIONS)
    2.) we also confirmed the motherboard has the correct slot and we correctly connected the correct (2) power cords. 
    EDIT: THERE IS NO PRIORITY TO CONNECTION, SO JUST BE AWARE THERE ARE TWO PLUGS AND BOTH FIRMLY INSERTED.
    We've called Nvidia and on the 5th time  , we were specifically told that it did not appear that the motherboard and graphic driver are compatible.[/flash] How could that be ??? did they give up???
    EDIT: THEY WERE INCORRECT, THEY DID NOT DIAGNOSE THE PROBLEM CORRECTLY.
    gfffffff*   We are just about giving up and preparing to package up the new card and taking the restock charge... 
    EDIT: NEVER GIVE UP!!!

  • Neo4 Plat SLI using SATA Raid cannot install WinXP 32

    I recently purchased the neo4 platinum and was quite amazed what all comes with the board. However, I have spent quite a while trying unsuccessfully to get winxp installed. I was previously using a pci rocketraid card to run my 2 maxtor drives as a stripped raid.
    Before doing the final shutdown and swap, I went into the rocketraid and deleted the array. Swapped boards (raid card did not follow), plugged in the 2 maxtors into sata ports 1 and 2. Configured nvidia raid bios settings to enable raid on sata ports 1 and 2. Entered nvidia raid bios, and created a stripped raid array with the 2 maxtors. Boot to winxp install, f6 and installed both drivers on included nvidia diskette. When I get to the partition selection, I have nothing but 'Unknown disk' listed several times. If I try to access one of these 'partitions' by either deleting or selecting, the system crashes (blue screen). 
    So, I deleted the nvidia array, the reinstalled my rocketraid card, and created an array on it. Went through the same install sequence, and am able to see the array as a selectable drive, and am able to install winxp on it. So, I am a bit lost on where to go from here.. I tried searching both here and google and I didnt see anyone with this particular problem. Id really love to get this bad boy running (a good upgrade for me), but it seems I am destined not to.  Please, someone help!

    Quote from: syar2003 on 09-July-05, 18:10:53
    Inside the nvraid rom bios make sure to clear disk data and set raid bootable .
    gah, sorry, I should have put that in my original post (did those).
    So, a bit of an update... after a bit more futzing around, I have tried multiple times on deleting, recreating (and clearing data) arrays, trying with and without setting to boot. After the 2nd or so array creation, my problem has slightly changed. Now, windows install does not recognize any hdd's present and wont continue.
    Out of curiosity, I blasted the array from the nvidia bios, then went into main bios, disabled nvidia raid, and enabled sil raid. Hooked up the drives to sil raid, and created an array. Windows install see's the array, and is currently installing to it. Now, while this may function as a work aorund (if it completes) I think I read somewhere the nvidia raid is not on the pci bus, but the sil raid is (which is why I want to use the nvraid). So, aside from any input or suggestions about resolving the problem I am having, any input on the differences between the two raid setups?
    edit- windows successfully installed on the sil raid array, but I still would like a fix for the nvraid

  • No sound from rears with 4 chanel onboard sound card (soltek) (inspire 5+1)

    hi i think nothing more to write
    i have an inspire 5200 5+ system instructions says use black and green cables for the 1st and 2nd speaker outs of your card. mine is onboard 4 chanel (soltek main board) so i did what ins says. center ok left ok right ok but not rears. i have no sound other than the h?sssss sound . i controled rear speakers by replacing with fronts they worked. DOES ANYONE HAVE ANY IDEA ?

    hi i think nothing more to write
    i have an inspire 5200 5+ system instructions says use black and green cables for the 1st and 2nd speaker outs of your card. mine is onboard 4 chanel (soltek main board) so i did what ins says. center ok left ok right ok but not rears. i have no sound other than the h?sssss sound . i controled rear speakers by replacing with fronts they worked. DOES ANYONE HAVE ANY IDEA ?

  • KT3 ultra Onboard sound card has no sound on right channel. help me...

       oh my god.. i tried everything after i took out my sound blaster from Win2k.....
    i installed all the drivers that i have... restore computer from 2k to 98 back to 2k.....checked all BIOS and cables.... used differrent video card... i spent 2 days... and it still has no sound on the right channel
    i tried 4 channel, the back works fine(both channel works) but the front only has left audio....
    i really need help!
    please... thanks    X(  X(  X(  ?(  :O

    ok.. i know what know..
    most likely is the connector, cuz i play a mp3 and record with wave the same time and i burn that audio to Cd and i listened to it in my cd-player, both side were working. so it's the connector.. i guess
    so where i can get this fix with my wanrranty?

  • MOVED: K9N Neo V3 Won't detect video card

    This topic has been moved to Linux/Unix.
    https://forum-en.msi.com/index.php?topic=137985.0

    Quote from: XrBob on 29-December-13, 14:23:50
    1.  The computer runs fine through the onboard video, I'm using it right now to type this.  Is it possible that the computer runs fine even with a bent pin?  Is it easy to tell if I have a bent pin?
    yes it may run fine if a pin that connects to the PCI-E connector is bent! you need to remove the cooler and CPU and look in the underlying socket with a Bright light and a magnifier to see if they are all strait and in line! with each other from a few angles like from above and then at a 45 degree angle to make sure they all look exactly the same!
    Quote from: XrBob on 29-December-13, 14:23:50
    3. Does that mean having the motherboard just hanging outside the case? 
    put the board on a piece of plain cardboard or wood (to prevent shorting) on a table and plug up the power and so on and see if it posts there (most builders do that before they put it in a case or place it on the motherboard box itself)!

Maybe you are looking for