K9N Platinum and BIOS flashing

New to MSI and this forum
I have a K9N Platinum which I've had some problems with and also need to flash the BIOS.
Problems are: Leadtek TV tuner card video problem watching TV (image and sound freezing) then my laser printer would not print through the parrallel port (works okay through a USB port).
Have had no real solutions from MSI with those two problems
Just recently I've come into owning a MSI 7950 GX2 video card.
Apparently this card won't work with the K9N unless I flash upgrade the BIOS (using A7250NMS, V1.20)
I know my way around computer hardware but BIOS flashing I've never done.
I'm using a NTFS file system,OS is WINXP SP1, processor AMD64 4800+ and HDD Hitachi 250GB SATA2
I have two choices to use these brand new video card:
1: Try to flash the BIOS (with the obvious risks involved)
2: Replace the K9N board with one that is compatible with the 7950 (bearing in mind the other problems with the K9N)
I've read artcles from this site and MSI about flashing using a NTFS file system and I'm not confident.
I know this post is between BIOS and motherboards so it was hard to decide where to place it.
If anyone has any thoughts on the best solution for this it would be appreciated

First of all , make sure you have a "fixedup" motherboard .
( the capacitor fix , see info in the "Post your K9N Ultra/Platinum (non SLI) 'Power Off' Issues Here (NForce 570 MCP)" thread)
https://forum-en.msi.com/index.php?topic=99924.0
Flash bios doesn't need to be done from HD .
You can have both afudos flash util and bios image file on a msdos bootable floppy diskette (verify it from windows with chkdsk A: /R )

Similar Messages

K9N Platinum and Corsair CM2X1024-6400 **UPDATE - FIXED**

I'm trying to help a friend with their new K9N Platinum motherboard. We got everything installed successfully, but after getting into Windows, the machine will just freeze up randomly doing anything, software install, whatever, within a minute, or sometimes as long as 5 or more minutes.
Basic specs:
K9N Platinum motherboard
Flashed to BIOS version 1.4
AMD Athlon64 X2 3800+ (65W) socket AM2
BFG Geforce 7900GS
500W PCI-E power supply
Wester Digital 120GB 7200rpm SATA HD 8MB cache
Single 1GB stick of Corsair CM2X1024-6400 RAM (DDR2 800MHz) - Brand New - DIMM slot 1
Windows XP Professional with SP2 and all windows updates installed. (using IE6)
Installed all latest drivers from MSI's website for this board.
We tried 1st with DRAM timings on auto, then tried to set the timing manually according to Corsair's spec sheet for this module, including memory voltage at 1.9V.
We think it might be a bad memory module, because after getting into Windows, we run memtest, and errors are detected within the 1st minute. We have RMA'd the RAM module. I'm wondering though if we just didn't have the timing for the memory set correctly in the BIOS.
Is anyone here runnning this exact memory successfully, or is this board incompatible with this Corsair module? If you are running successfully, did you have to change the SPD timings manually, or are you running using the SPD Auto setting?
If you had to use manual setting, any help with the values to set in DRAM Timing would be greatly appreciated. As much detail as you can provide would be great. Thanks for your help.

Ok, still having major problem with running world of warcraft. This PC freezes/locks up in the game every single time within 5-10 minutes of play no matter what we've tried so far. This is not a shutdown or restart problem, just a freeze/lock-up symptom. I'm getting a bit frustrated at this point. No other problems in windows are encountered. We can work in windows with any other application, like adobe photoshop or any other software, with zero trouble. I'm beginning to think this is video card related somehow with this 7900 GS card.
For added info, the video card being used is this;
BFG Tech BFGR79256GSOCE GeForce 7900GS 256MB 256-bit GDDR3 PCI Express x16 Video Card
Chipset Manufacturer NVIDIA
GPU GeForce 7900GS
Core clock 525MHz(vs. 450MHz standard)
PixelPipelines 20
Memory Clock 1320MHz
Memory Size 256MB
Memory Interface 256-bit
Memory Type GDDR3
3D API
DirectX DirectX 9
OpenGL OpenGL 2.0
Ports - DVI 2
The mouse used is a logitech USB track ball mouse if that has any bearing on anything. No mouse troubles though, just thought I'd mention it.
Here's what we've tried so far;
Updated to BIOS version 1.4. This was done after the Windows XP install though, so not sure if something is hosed up here.
1) We set the RAM timings to 5-5-5-12-2T and 2.1Volts in BIOS manually, as per direct recommendation from Corsair.
1a) Ran memtest all night for about 9 hours straight and no errors at all detected. So I'm guessing this isn't a RAM problem really, but who knows .
2) Installed the Windows XP SP2 Hotfix for Dual Core Processors - hotfix KB896256
3) Installed the AMD Dual Core Optimizer from here -->http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_13118,00.html
4) Updated the Nvidia system drivers with the nForce 550/570/570/590 SLI (C51+MCP55) driver package 9.19 WHQL from MSI's website here--> http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=730&kind=1
5) Currently running Nvidia video driver version --> ForceWare Release 90 Version: 93.71 Release Date: November 2, 2006 WHQL Certified.
6) Ran a complete Direct X diagnostics via dxdiag. All tests passed successfully.
7) Tried to install the AMD Athlon™ 64 X2 Dual Core Processor Driver for Windows XP and Windows Server 2003 Version (x86 and x64 exe) 1.3.2.16 from here -->http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_13118,00.html
But it would NOT install because it says I have to first uninstall the current driver via add/remove programs, but it's not listed there, before installing this one. So, I have no idea where to look or how to do this, I'm afraid of messing up the processor driver. Can someone explain how to install this driver, and would not having this installed possibly be a potential cause of the game lock-ups?
I don't know what else to do. Could the version 9.19 Nvidia SATA or IDE drivers I installed be causing these game lock-up problems? If so, do I just go into device manager and just rollback drivers for all of the devices listed under the "IDE/ATA ATAPI Controllers" in device manager?
Again, this was a fresh windows XP Pro install on a newly formatted hard drive. Obviously something is fubar, but I'm running out of things to try. Maybe going into BIOS and "load optimized defaults" and start over?
Lastly, the tech specs on newegg.com for this video card say "A 350W PCI Express compliant system power supply (with 12V current rating of 22A or more)" is needed. Since the 500W power supply we're using has 2 separate 12V rails rated at 20A each, could this be the problem?? I'm open to suggestions. Thank you.

K9N Platinum and OCZ2P8001GK

Hi. I bought 2 OCZ PC2-6400 512MB DIMM (OCZ2P8001GK) and I am thinking of buying the MSI K9N Platinum (non-SLI) board to run with AMD Athlon X2 3800+. Will it be any compatibility problems running the system with those memory modules? [Running at stock speed (at least), both CPU and RAM (800)].
thnx for any info.

amd athlon x2 3800+ am2
msi k9n platinum ver1.0
ocz ddr2 800 platinum * 2
psu thermaltake TR2-550PP
gainward 7600GS
wdc 250gb ks sata2
nec 3550A dvd-r
floppy
hec-6ar6 case
i plugged all the above together, inserted only one ram module in dimm no2 socket and the system boot just fine...the cpu clock on memtest86+ v1.65 says athlon x2 1005mhz, is that correct?i will let memtest run for half an hour and then plug in the second ram module. the m/b has bios version 1.0 (!!) but the memory is normally recognized at 800 mhz as it should be.more soon...

K9N Platinum Beta Bios?

Can anyone tell me or show me if there is a new beta bios out for the K9N Platinum?
Right now I'm using beta 1.45 and it works great! Except...I just want something that will fix the stupid cpu temp reading!!!
Lemme know if you find anything.
thanks!

Quote from: natasha on 09-January-12, 03:00:18
What cpus does this bios support? Just curious if it will do a phenom 9750.
Please start your own new topic instead of bringing up one that's been dead for 5 years.
>> Please read and comply with the Forum Rules <<
>> Posting Guide <<
Edit: No the K9N Platinum does not support AM2+ CPUs of any kind with any BIOS.

K9n Platinum S3 BIOS Issue

Hi
I have a K9N Platinum board that is running Windows MCE2005. My issue is that the only bios that I can use to successfully send the pc to sleep is the 1.3.
If i try any other bios ( up to the latest ) whenever I put it to stand-by it immediately turns back on!
I have even disabled all wake up events in the bios with nothing plugged in at all and it still just resumes straight away.
Bios v 1.3 is the only one that it works correctly on.
Any ideas anyone?
Cheers

Quote from: jaiidan on 31-May-08, 08:48:36
Er...and then what do I do with the issue that I have posted about originally!!
They may go away, they may not. But you need that CPU first.

K9agm3-fd and bios flash

Hi
My problem is that i can't get my mobo's bios flashed!
SureHands Live Update doesn't support my motherboard (k9agm3-fd).
The other problem is that my bios doesn't have the option to boot from my usb stick whicj includes the necessary files to do it manually..
what can i do?
Thanks for any help!

I split off your post so you have your own thread. Why do you need to update your bios?
Download the bios and you can prepare a USB stick with the file on the computer using the HQ Forum Flasher. >>Use the MSI HQ Forum USB flasher<<
Do you have USB Legacy device enabled in the bios? Make sure you have that enabled and then when you boot with the USB flash drive installed hit F11 and choose the device as the hardware to boot from. But, let's be sure you need to flash the bios. Read the >>Posting Guide<< and please provide your system specs.

Z87-G45 Ethernet and USB problems. And BIOS flash problems

Hi. I kind of have a problem and hope you guys can help me.
I got this motherboard yesterday but I got a major problem with the Ethernet connection. It will simply not work, it’s totally dead. I have tried to enable everything that has to do with the Ethernet (Settings/advanced/intergrated peripherials) but it still will not work. There is no light at the back side that indicates that there is signal when I plug in the cable. I have tried the cable on my laptop so I know there is signal.
There is no problem installing windows, but I can’t install the drivers for the ethernet. I get an error message then that there is no hardware that can use this drivers.
Are there any places in the BIOS where I can enable it? How can I get this up and running?
And my USB driver is kinda messed up too. My 120MB UBS pen is found and can be used, but my 64Gb flash pen and my 500Gb USB HDD will now work with the USB. I only get the USB "ping" connection sound over and over and over and over again with the windows error, drivers not installed.
The other thing about the USB is that every time I restart the PC, I have to unplug the mice and put it into an other USB to activate it.
I have tried to flash the BIOS, but when I try (after pushing m-flash and connecting the USB and finding the file), the whole BIOS just freezes up and nothing happens. I try to wait a bit but nothing happens. I have to manually restart the machine by "force" (Turning the power to PSU off and on again. Ayone know if there is a problem with flashing the BIOS from USB? Or maybe that the USB system is messed up? Any other way I can flash the BIOS?
I have downloaded all the latest drivers and updated.
Best regards
Robert

Quote from: flobelix on 08-January-14, 00:44:08
Again do not try to use MFlash. Try the board outside case like suggested.
THis is making me frusterated now......
I have now had the motherboard on my wood table with a antistatic tablecloth and antistatic armband.
I only plugged in 1 ram, power, a monitor and mouse/keyboard(USB).
I manage to get the USB pen bootable so I could do the memtest and biost flash.
The USB ports are still unstable. I still have to move my mouse and keyboard from slot to slot when I restart the machine. It feels like if random USB conection is being turned off and on for every time I start the computer.
I connected a HDD to install Windows 7 64bit.
The computer will still not read USB storage with larger then my 120mb storage in both the BIOS and Windows (I suspect that 1GB is the limit for some rason). It only shows that USB device was not installed.
After I isntalled the USB 3.0 drivers that came with the mother board, the USB 3.0 system just stoped working. I tryed to update the drivers to the latest ones, but they still dont work. The USB 3.0 drivers do work in BIOS, but the drivers that came with the motherboard does not support windows 7 64bit. Or this motherboard.....
The ethernet conection is still FUBAR. When I try to install the drivers from the CD, the "LAN picture" is still grayed out. And when I try to force install the drivers, nothing will accept the network connectin. Trying to install the Killer Network Manager just ends up in "No supported hardware found in your system". It is like that the ethernet system is turned totally off.... But in the BIOS is marked as enable.
I have tryed to installe Realtek drivers, Intel drivers and the Atheos drivers, but non of them will install, all just say that there is no network that supports this drivers.
I am at my wits end right now. During the last 15 years I have build about 20 computers and this motherboard is taking 1st price for being the worse one ever.

P35 Platinum, Failed BIOS flash through Update tool, anyway to restore?

Specs:
Intel E6700 (Core 2 Duo)
AMI BIOS version is 1.0, 1.1 or neither (see below)
MSI P35 Platinum (MS-7345 VER1:1)
2x OCZ 1024MB 1066MHz
Asus GeForce 8800 GTS 640MB DDR3
Seagate Barracuda 400GB
Windows Vista Business
Neo-Link 1200W Dual PSU system (in reality 1x 650W + 1x 550W)
Everything worked for about a day, then I decided to run the MSI update tool and flash the BIOS using the MSI update tool. The installer indicated that the installation was a success.
But during reboot I got no post from the BIOS.
Onboard LEDs indicate, according to the manual: "Decompressing BIOS image to RAM for fast booting" (Top two red (group 3 and 4), bottom two green (group 1 and 2)). (I gave it ~1 hour, just in case).
After that, I followed the instructions at http://www.msicomputer.com/support/sup_tshoot.asp#1_2
Downloaded the 1.0 BIOS, put it on a FAT32 formated floppy disk, (renamed the "7345IMS.100" file to "AMIBOOT.ROM" and dropped it into the root of the floppy (ie: "a:\AMIBOOT.ROM")). Rebooted, holding down CTRL-Home as instructed.
The Floppy will read now and then... (every 20th second?), but no real activity.
LEDs are still indicating "Decompressing BIOS image to RAM for fast booting".
Between attempts at restoring the BIOS from the floppy, I also tried pressing the "Clear CMOS" button. Tried removing CMOS battery.
Gone through the search a bit, but not found any solutions for the problem (though, who knows, I might've missed something, I guess)
Found a few with similar problems, but none with solutions that I haven't tried (above)
Is there any way I can fix this?
Thank you.

Intel/Core 2 E6600
MSI P35 Platinum (MS-7345 Ver 1.1 AMI)
Kingston KVR800D2N5K2/2C 2GB
Asus EN8600GTS
Seagate ST3500630NS 500GB
Windows XP pro Sp2
Case Lian-Li PC-V1000A Plus II
While bringing up a new system, I enabled Boot Sector Protection and tried to save the user configuration.
This appears only when Protection is disabled.
The Boot Sector Protection label is misleading to me as it should include NVRAM update enable.
The system immediately died and went into the same loop as described.
The CMOS battery checked out as good and the motherboard had continuity to the battery.
The new case only has a power button, no reset. I could find no combination that would recover from this.
Installed a 3.5inch floppy and a reset switch to JFP1 pins 5,7. The pushbutton is mounted on an unused rear filler panel.
Prepared an AMIBOOT.ROM file as described.
Removed power from the box.
Pushed the CMOS reset button.
Loaded floppy in slot.
Power restored and turned on.
Pushed reset a few times until the floppy drive began to read.
The program said that the ROM checksum was bad and the NVRAM would be destroyed but that the CMOS memory would be preserved.
Removed the floppy.
On boot the BIOS was refreshed via F1 to reset date/time, etc.
Save & exit.
Windows loaded OK.
Windows Live was used to update BIOS successfully but a floppy was essential.

K9N Platinum Bios flash

Hello, I got a K9N Platinum and I did flash is succesfull to 1.8, but did screw my windows vista drivers :( .
so np, C:/ is only windows for me, my files are on other drives and I installed windows again.
but after a few restart system files get damaged again. now I want flash it back to a version with full support with the amd x2 6000+. (flasht my bios with a x2 3800+ but someone said to me 1.0 bios version dont support 6000+ so flasht it before I did put in my new processor)
anyone can tell me the most stable version or I should flash it back to 1.0? (btw that backup I made with live update 3 is 1.8 too ??? )
can someone give me some advice me what are the best options for me? many thanks.

Quote from: Arcur on 16-September-07, 06:01:22
everything works fine now, but when I shut down my pc and after 5 minutes I turn him on, the computer starts but he lost the videocard driver ???
When I install the driver again it works fine and restarting the computer too, but a compleet shut down let him lose the driver or something.
Is this because I dont have activated my windows copy yet or just because when I first time restarted my pc, after installing chipset drivers, he deleted some files with checkdisk again (checkdisk dont start anymore now when starting up windows only just once, but windows did start succesfull after checkdisk without errors in windows).
I really dont know if this something has to do with my bios, but windows did never start checkdisk before starting up my OS and del. some files or something. If you dont know what this is I gonna try XP I think, because I almost want to trow my pc out of the window
EDIT:
Did delete the driver and let Windows install it byhimself instead of the exe file from Nvidia and now he dont lose the driver info anymore when I shut down my pc :D really I dont know, but strange things are computers or windows just suck
"but strange things are computers or windows just suck "
Its Vista... make sure that vista is up to date... especially of those patches:
Microsoft Issues Windows Vista Hotfix for Gaming: https://forum-en.msi.com/index.php?topic=110767.0
Update for Windows Vista (KB938979) - Performance Update: https://forum-en.msi.com/index.php?topic=110273.0
"everything works fine now, but when I shut down my pc and after 5 minutes I turn him on, the computer starts but he lost the videocard driver ???"
update vista via windows update and re-install the drivers...
Have you tested under XP? i don't expect such problems there..

K9N2 SLI Platinum raid setup after bios flash

Hi
I'm building a new system based on K9N2 SLI Platinum. Apart from a new 80 GB sys. HDD everything else is reuse from another MB (MSI K9N Platinum).
Here is what is puzling me: Before trying to install WinXP i flashed the bios to 3.2 because of the included updates to the raid bios. Flashing went well, however in my setup I want the 80 GB HDD to be non-raid and the two 320 GB HDD to be raid1. I've set this up in bios so that only channel 5 and 6 is enabled for raid and would expect that the 80 GB HDD (channel 1) would show up as a normal sata HDD when starting up. But it doesn't - it is listed as 0.0 xxxx after the "press F10 to enter raid setup" message?
This is strange because I had the same HDD setup on my old MSI K9N Platinum and there the 80 GB sata HDD was shown as a "normal" disk and not as a "appendix" to the raid list.
Because of this I have problems installing WinXP on the 80 GB HDD
Any suggestions?

Hi BOSSKILLER
Thanks for your quick response.
Quote from: BOSSKILLER on 12-August-08, 00:14:44
Well, leave the 80GB only and install XP over it.
Then connect other two HDD's and enable RAID for them.
Unfortunately this didn't help. As soon as I installed the Windows nVidia RAID SW it prompted med that it had registered the 80 GB disk as a new disk that wasn't a member of any RAID. This happened everytime Windows XP was started.
The trick was to add the 80 GB disk as a Spanned disk using the nVidia RAID BIOS setup utility. Install Windows XP (again) and the Windows nVidia RAID SW and setup RAID 1 on the other two sata disk.
I don't think this is a great setup but it works. I hope that MSI will fix this issue in a later BIOS upgrade. It would be nice if the enabled/disabled for sata RAID setting actually worked.

K9N Platinum Motherboard problem???

Hello. I got a K9N-Platinum motherboard and AM2 X2 4600+ CPU. However, I often got the following problem:
My system sometimes froze, no response at all, couldn't use mouse and keyboard of course.
1) I set up the system to shut down monitor after 60 minutes. However, sometimes the system couldn't
recover, all parts stopped working, including hard disks.
2) When the hard disk is transferring, such phenomenon could happen again.
Finally I found a solution. I had to manually set up the CPU voltage to "1.35V" in BIOS which can resolve my problem completely.
This problem only happened when the cpu voltage was set to "auto".
I thought it was a power management problem, so I installed hotfix KB896256 and KB924441 and all dual-core
cpu optimizers, the problem still existed.
My system is as follows:
K9N Platinum with BIOS 1.6 (601-7250-070********)
AM2 X2 4600+
Geil DDR2 800 1G*2
Inno3D 7900GS
Western Digital Raptor 37G
Liteon 18X DVD burner
500W PSU
I want to know whether this is a defect of my motherboard. Any advices would be appreciated.
Thanks.mate.

Quote from: cxy1808 on 13-May-07, 09:43:20
Can understand the question "what CPU core do you have"?
I have the AM2 dual core 4600+ CPU,Windsor core, 89W watt.
yep that i have asked, well there is nothing to worry about voltage applied manually matched with your default CPU vcore.

K9N Platinum: upgrade to X2 5600+ or X2 6400+?

Hi. This is my first post. I would like to upgrade my CPU on my K9N Platinum and I have a couple of questions:
1. I have narrowed down to two: X2 5600+ (89w) or X2 6400+ (125w)?
- both have the same L2 cache, but the speed and wattage differ
- I play some games and some video encoding
2. Will the power supply that I have be sufficient for the X2 6400+ and support a video card upgrade to a GeForce 8800 series?
Many thanks in advance.

Quote from: Ragnor on 12-February-08, 11:22:49
but doesn't overclocking too much or running certain clock speed for too long, will shorter the cpu's life span?
I have a XP1700+ In a MSI K7N2 Delta L, which is default 1.47 and I have had it at 2.0 for nearly four years, aftermarket Copper Core air cooler. The 5000+ Blackie's that I have are at a 16 Multiplier for 3.2 speed. I have one in a abit KN9 SLI and the other in my MSI K9A2 CF both run cool. I am not overclocking my 6400+ Blackie right now, but I would expect it to have a good bit less Overclocking potential. It runs super at default though.
I had a Overclocked ATI 9500 Pro and it died after two and a half years, but I really had it cranked, so yes and no to your question. Good cooling alleviates most of the possible damage. If you are Cool then you are usually okay.

K9N Platinum bios version & cpu support

Hi!
I need some help to clear up some questions regarding my MB.
MB: K9N Platinum, Cpu-z states my bios version is 080014, but i cant see it in the bios list for my MB, so what version is it?
Im currently running with a Athlon X2 5200+ Windsor, and i have got my hands on an Athlon X2 6400+ Black Edition, as far as i can see my MB is supporting that cpu, but is my current bios up to date for the cpu?
I have downloaded the MSI usb bios flashtool and i have set it up, and it boots in dos, but when i run memtest the program just says in one line memtest and a flashing + nothing more happens (i have left the pc for about 3-4min but no change) i feel that im starting to push my luck, and i dont want to kill this MB since its my work and gaming rig.
System spec:
MB: K9N Platinum
CPU: Athlon 64 X2 5200+ (want to install Athlon 64 x2 6400+ BE ID: ADX6400IAA6CZ)
RAM: 6Gb DDR2, 2x1Gb, 2x2Gb
GPU: GIGABYTE GTX260 Super OC Edition
PSU: CORSAIR HX520W

Quote from: Lando on 12-November-10, 08:06:01
Thx Svet.
And if im reading this right "Athlon X2 Windsor ADX6400IAA6CZ 6400+ 200 3.20 2M N/A F3 125 7250v18.zip".
http://www.msi.com/index.php?func=prodcpu2&prod_no=252&maincat_no=1&orderby=core_name%20ASC#menu
I need atleast Bios 1.8 to get my MB to work with the new cpu.
So now i just have to figure out why mem test wont run.
Quote
So now i just have to figure out why mem test wont run.
Memtest do have some bugs. You can do test with Orthos instead:
https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534
To check is your system is stable or not.
Once done you can ignore Memtest when asking after booting from the USB key
Also leave 1 memory stick only temporary in the 1st DIMM close to CPU socket before BIOS flash.[put remaining sticks back when BIOS flash is done/finished].
Quote
And if im reading this right "Athlon X2 Windsor ADX6400IAA6CZ 6400+ 200 3.20 2M N/A F3 125 7250v18.zip".
http://www.msi.com/index.php?func=prodcpu2&prod_no=252&maincat_no=1&orderby=core_name%20ASC#menu
I need atleast Bios 1.8 to get my MB to work with the new cpu.
Go for latest one:
http://download1.msi.com/files/downloads/bos_exe/7250v1B.zip

Bios Flashing and Recovery

BIOS FLASHING
We do not recommend using the MSI LiveUpdate tool to update your BIOS! It may be okay for updating your drivers, but please do not use it to flash the BIOS in Windows!
Windows-based flashing - If you REALLY insist on flashing the BIOS under Windows, if you encounter any error during flashing, whatever you do, DON'T restart your PC! Try again until the flash is successful, otherwise your board will not start! Disable any anti-virus program (along with any other programs) prior to flashing.
Boards with built-in M-Flash function - While M-Flash work's properly most of the time, it has still proved to be less reliable than the forum tool / manual flash.
Before flashing your BIOS, you must ensure your system is fully stable! Any instabilities can cause a bad flash and create an expensive paper weight. Included with the forum flash tool is MEMTEST, we recommend running this for 2 or more passes prior to a flash.
If you do not understand what your BIOS is, or what it does, please read: >> BIOS. What it is, and all you need to know <<
Our first choice we recommend you use is our own USB flashing tool, developed by Svet.
It is important to note, that the only way to flash the ME extension of the BIOS of modern Intel boards is through the use special processes. The bios versions posted by moderators here: >>BIOSes<< include the additional files to accomplish this. These bios are all official and are directly from MSI.
>>>MSI Forum HQ USB Flashing Tool<<<
If you are unable to use the MSI HQ USB BIOS Flashing Tool
>>How to create a dos bootable USB stick>>
It is important to note that if any BIOS, EC FIRMWARE or any other type of FIRMWARE downloaded from MSI for a manual flash contains an BAT file it must be used. Not doing so will cause the flash to fail and require RMA.
For Intel Users, flash via FPT
Socket LGA 1150 : >>ME 9 FPT files & Instruction>>
Many of the bios versions posted here: >>BIOSes<< Contain a .bat file. All you need to do is extract all of the contents of the archive into the root directory of a DOS bootable USB stick and run the bat file from pure DOS.
Socket LGA 1155 & 2011: >>ME 7&8 FPT Files and instruction<<
Linux users
See this topic: >>Flash your BIOS, the Linux way! [beware the dangers!!]<<
Modified and BETA BIOSes
Use only at your own risk! All BETA BIOS versions posted by the moderators of this forum are directly from MSI and will not effect your warranty.The use of user modified BIOS versions may damage the board and may void your warranty. Exercise extreme caution in regards to user posted BIOS versions. Please also be aware that MSI and this forum can not be held responsible if you trash your mobo by using a modded, beta or otherwise incorrect BIOS.
WHEN IT ALL GOES WRONG...
BIOS RECOVERY
In many cases, provided the 'bootblock' of your BIOS is not corrupted during a bad flash, the BIOS can often be recovered by following the recovery procedures detailed below. NOTE: this recovery method should not be followed for normal practice of updating your BIOS!
For Modern MSI Systems, refer to:
<<Multi-Bios Equipped Mainboards>>
<<Single-Bios Equipped Mainboards>>
Legacy Systems:
For Award BIOS
Make a bootable floppy disk*
Copy the Award flash utility & BIOS file to the said floppy disk
Create an autoexec.bat with "Award_Flash_Utility BiosFilename" in the content (e.g. awdfl823K w6378vms.130)
Sample on how to create an autoexec:
a. On Windows, open the notepad
b. On the notepad, write "awdfl823K w6378vms.130" (without the " ")**
c. Save the file as autoexec.bat
Boot up system with the said floppy (it will take less than 2 minutes before screen comes out)
Re-flash the BIOS & reboot.
*Need a bootable floppy disk? Look here: http://www.bootdisk.com
**Make sure you enter the correct filenames for your flasher program and BIOS ROM file!
For AMI BIOS
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.
For new boards with AMI BIOS core 8 (4MB)
Discovered by Jack The Newbie:
Of course, the steps are similar to the standard AMI BIOS Recovery Procedure for internal floppy drives (rename corresponding BIOS File to AMIBOOT.ROM, hit CTRL + HOME after starting the system).
What has to be done (tested on P45 Platinum):
1. An optical SATA Drive needs to be connected to one of the Intel ICH10R SATA ports. {After a lot of testing, I found that it does not work with the same optical drive connected to the SATA Ports hosted by the secondary JMicron Controller. Also, using an optical drive on the JMicron IDE/PATA port does not help either.}
2. A proper BIOS File has to be renamed to AMIBOOT.ROM and burned on an empty CD.
3. CMOS-Clear with main A/C power cable removed from PSU has to be performed. {If this step is not done, the system will reboot after pressing CTRL + Home and will not proceed with recovery procedure.}
4. Press CTRL + Home to trigger BIOS Recovery. -> The system should enter BIOS Recovery Routine. {Will basically work with both USB & PS/2 keyboard. However, a PS/2 Keyboard is recommended as the system will respond earlier to PS/2 Keyboard than to USB Devices.}
What should happen now:
1. After pressing CTRL + HOME the LED Status should change to "Intializing Hard Disk Controller" and there should be access to the optical drive connected to the Intel ICH10R SATA ports.
2. It can take up to 30+ seconds until the BIOS File that was renamed to AMIBOOT.ROM is found. {Drive Bay can be opened to try a different CD without turning off or restarting the system.}
3. When the system finds the BIOS File, LED Status will change to "Testing RTC" and there should be a message on the screen indicating that the Flash Recovery Procedure has started.
4. Since the BIOS File is 4MB in size, it will take a while until the BIOS is actually reflashed.
Its also possible that BIOS recovery on boards with AMIBIOS8 can be done using a FAT-formatted USB stick, containing the renamed BIOS file. Be warned, in some circumstances it may take several moments before recovery procedure actually begins. See Bas' reply below for further information.
BIOS recovery on Wind netbooks
See this post here:
https://forum-en.msi.com/index.php?topic=130509.msg982711#msg982711
BIOS recovery on non-UEFI notebooks
In order to recovery this type of system you will need an FAT32 formatted USB stick.
Download the applicable bios from MSI's website and rename this bios.
It must be re-named to either AMIBOOT.ROM or xxxxIMS.ROM / xxxxAMS.ROM You may need to try each way to determine which one is necessary.
Then place the renamed bios onto the root directory of the FAT32 formatted USB stick.
Now you are ready to cover the Notebook.
To do this, remove the AC power cord and battery. Once that has been completed, install the USB stick you prepared earlier.
Now, apply AC power (leaving the battery disconnected) and turn on the notebook. Recovery should begin after 5 minutes.
IF ALL ELSE FAILS...
Locate the BIOS chip on your mainboard. If it is soldered directly to the PCB like...
...then you have no choice but to return the board to your supplier, or to MSI, for replacement.
To request an RMA from MSI, open a support ticket at https://register.msi.com/ocss/
If your BIOS chip is in a socket, like...
...then you may be able to source a replacement BIOS chip, either from MSI, or from a website such as www.badflash.com
Updated 11/21/2013, original post by Stu

A.) Download >>this<< bios archive and place it on your desktop. Do not decompress.
B.) Download and install the >>MSI HQ Forum USB flasher<< .
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB from working bios B.
G.) Once it booted successfully switch to bios A without powering down or rebooting
H.) Now follow the directions and let the tool flash bios A with desired version

K9N Platinum - Wrong CPU Temperature in BIOS

Hi, I have a K9N Platinum (7250-020) with the latest 1.3 BIOS and an AMD X2 3800+. The CPU Temperature in the BIOS has a negative sign in front of it, and it seems to always report -48*C. I tried the latest nVidia nTune and it was reporting the CPU temperature to be 208*C, which is absolutely impossible...
Does anyone have the same problem? I searched around and it seems I'm not the only one, but I still cannot understand if it affects only some K9N Platinums or all...
Thanks.

Quote from: CBR600RR on 09-November-06, 06:51:56
I assume you are talking about checking voltages as reported by the BIOS in the HW Monitor page, not physically checking them with a multimeter, correct?
I'll take a look at the numbers in the BIOS, but last time I checked they were ok.
As for raising the issue with MSI, eventually I will, even if they ask you soooooo many questions (for good reasons, I know...) that it would take me half an hour to fill that form...
I've checked with both and software is a little out from what a multimeter state's. Only check with a multimeter if your happy to do so. http://forums.extremeoverclocking.com/showthread.php?t=137886 offer good advise if using a multimeter .....
The only issue I see is the AUX connector for 3.3v with ATX2.0 spec (Modular cables etc)
Quote
TheCleaner:
CAUTION: This test involves using probes with the computer ON. Please only do this if you feel competent enough to be dealing with electricity. If you short rails, you could risk damaging the PSU and possibly your components. I cannot be held responsible if something goes wrong, this is merely a guide. If you feel any concern, please post BEFORE doing this, and I will be glad to help.
Contacting MSI would be good to let them know of the problems your having

K9N Platinum and BIOS flashing

Similar Messages

Maybe you are looking for