K9N Platinum Beta Bios?

Can anyone tell me or show me if there is a new beta bios out for the K9N Platinum?
Right now I'm using beta 1.45 and it works great! Except...I just want something that will fix the stupid cpu temp reading!!!
Lemme know if you find anything.
thanks!

Quote from: natasha on 09-January-12, 03:00:18
What cpus does this bios support? Just curious if it will do a phenom 9750.
 Please start your own new topic instead of bringing up one that's been dead for 5 years.
   >> Please read and comply with the Forum Rules <<
   >> Posting Guide <<
 Edit: No the K9N Platinum does not support AM2+ CPUs of any kind with any BIOS.

Similar Messages

  • K9N Platinum and BIOS flashing

    New to MSI and this forum
    I have a K9N Platinum which I've had some problems with and also need to flash the BIOS.
    Problems are: Leadtek TV tuner card video problem watching TV (image and sound freezing) then my laser printer would not print through the parrallel port (works okay through a USB port).
    Have had no real solutions from MSI with those two problems
    Just recently I've come into owning a MSI 7950 GX2 video card.
    Apparently this card won't work with the K9N unless I flash upgrade the BIOS (using A7250NMS, V1.20)
    I know my way around computer hardware but BIOS flashing I've never done.
    I'm using a NTFS file system,OS is WINXP SP1, processor AMD64 4800+ and HDD Hitachi 250GB SATA2
    I have two choices to use these brand new video card:
    1: Try to flash the BIOS (with the obvious risks involved)
    2: Replace the K9N board with one that is compatible with the 7950 (bearing in mind the other problems with the K9N)
    I've read artcles from this site and MSI about flashing using a NTFS file system and I'm not confident.
    I know this post is between BIOS and motherboards so it was hard to decide where to place it.
    If anyone has any thoughts on the best solution for this it would be appreciated   

    First of all , make sure you have a "fixedup" motherboard .
    ( the capacitor fix , see info in the "Post your K9N Ultra/Platinum (non SLI) 'Power Off' Issues Here (NForce 570 MCP)" thread)
    https://forum-en.msi.com/index.php?topic=99924.0
    Flash bios doesn't need to be done from HD .
    You can have both afudos flash util and bios image file on a msdos bootable floppy diskette (verify it from windows with chkdsk A: /R )

  • K9n Platinum S3 BIOS Issue

    Hi
    I have a K9N Platinum board that is running Windows MCE2005. My issue is that the only bios that I can use to successfully send the pc to sleep is the 1.3.
    If i try any other bios ( up to the latest ) whenever I put it to stand-by it immediately turns back on!
    I have even disabled all wake up events in the bios with nothing plugged in at all and it still just resumes straight away.
    Bios v 1.3 is the only one that it works correctly on.
    Any ideas anyone?
    Cheers

    Quote from: jaiidan on 31-May-08, 08:48:36
    Er...and then what do I do with the issue that I have posted about originally!!
    They may go away, they may not. But you need that CPU first.

  • K9N Platinum Motherboard problem???

    Hello. I got a K9N-Platinum motherboard and AM2 X2 4600+ CPU. However, I often got the following problem:
    My system sometimes froze, no response at all, couldn't use mouse and keyboard of course.
    1) I set up the system to shut down monitor after 60 minutes. However, sometimes the system couldn't
    recover, all parts stopped working, including hard disks.
    2) When the hard disk is transferring, such phenomenon could happen again.
    Finally I found a solution. I had to manually set up the CPU voltage to "1.35V" in BIOS which can resolve my problem completely.
    This problem only happened when the cpu voltage was set to "auto".
    I thought it was a power management problem, so I installed hotfix KB896256 and KB924441 and all dual-core
    cpu optimizers, the problem still existed.
    My system is as follows:
    K9N Platinum with BIOS 1.6 (601-7250-070********)
    AM2 X2 4600+
    Geil DDR2 800 1G*2
    Inno3D 7900GS
    Western Digital Raptor 37G
    Liteon 18X DVD burner
    500W PSU
    I want to know whether this is a defect of my motherboard. Any advices would be appreciated.
    Thanks.mate.
     

    Quote from: cxy1808 on 13-May-07, 09:43:20
    Can understand the question "what CPU core do you have"?
    I have the AM2 dual core 4600+ CPU,Windsor core, 89W watt.
    yep that i have asked, well there is nothing to worry about voltage applied manually matched with your default CPU vcore.

  • MSI K9N Platinum Beeps at bios?

    I've recently built my own PC, with a MSI K9N Platinum motherboard. Everything works fine, but everytime at the MSI Boot screen (Press del to enter bios blabla etc.), i hear 3 beeps.. I was wondering if this is normal or not?
    Everything works fine though.
    And another thing: Are there any options inside the BIOS i just have to enable/disable for better performance? I heard some stuff about 'spectrum' or something? And the memory command rate, i heard it's better to put it on 1T instead of 2T?
    Any suggestions are welcome

    Some boards have the habit of beeping more then once when USB-devices are connected. If you want to check your system for this, disconnect all USB-devices and boot your system.
    About settings: yes, 1T's slightly better then 2T. However, your system may not boot if you set 1T command rate. If it won't boot, simply reset cmos to set it back to 2T.
    Leave Spread Spectrum to Disabled, unless you start OC'ing.

  • K9N Platinum bios version & cpu support

    Hi!
    I need some help to clear up some questions regarding my MB.
    MB: K9N Platinum, Cpu-z states my bios version is 080014, but i cant see it in the bios list for my MB, so what version is it?
    Im currently running with a Athlon X2 5200+ Windsor, and i have got my hands on an Athlon X2 6400+ Black Edition, as far as i can see my MB is supporting that cpu, but is my current bios up to date for the cpu?
    I have downloaded the MSI usb bios flashtool and i have set it up, and it boots in dos, but when i run memtest the program just says in one line memtest and a flashing + nothing more happens (i have left the pc for about 3-4min but no change) i feel that im starting to push my luck, and i dont want to kill this MB since its my work and gaming rig.
    System spec:
    MB: K9N Platinum
    CPU: Athlon 64 X2 5200+ (want to install Athlon 64 x2 6400+ BE ID: ADX6400IAA6CZ)
    RAM: 6Gb DDR2, 2x1Gb, 2x2Gb
    GPU: GIGABYTE GTX260 Super OC Edition
    PSU: CORSAIR HX520W

    Quote from: Lando on 12-November-10, 08:06:01
    Thx Svet.
    And if im reading this right "Athlon X2 Windsor ADX6400IAA6CZ 6400+ 200 3.20 2M N/A F3 125 7250v18.zip".
    http://www.msi.com/index.php?func=prodcpu2&prod_no=252&maincat_no=1&orderby=core_name%20ASC#menu
    I need atleast Bios 1.8 to get my MB to work with the new cpu.
    So now i just have to figure out why mem test wont run.
    Quote
    So now i just have to figure out why mem test wont run.
    Memtest do have some bugs. You can do test with Orthos instead:
    https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534
    To check is your system is stable or not.
    Once done you can ignore Memtest when asking after booting from the USB key
    Also leave 1 memory stick only temporary in the 1st DIMM close to CPU socket before BIOS flash.[put remaining sticks back when BIOS flash is done/finished].
    Quote
    And if im reading this right "Athlon X2 Windsor ADX6400IAA6CZ 6400+ 200 3.20 2M N/A F3 125 7250v18.zip".
    http://www.msi.com/index.php?func=prodcpu2&prod_no=252&maincat_no=1&orderby=core_name%20ASC#menu
    I need atleast Bios 1.8 to get my MB to work with the new cpu.
    Go for latest one:
    http://download1.msi.com/files/downloads/bos_exe/7250v1B.zip

  • K9N Platinum - Wrong CPU Temperature in BIOS

    Hi, I have a K9N Platinum (7250-020) with the latest 1.3 BIOS and an AMD X2 3800+. The CPU Temperature in the BIOS has a negative sign in front of it, and it seems to always report -48*C. I tried the latest nVidia nTune and it was reporting the CPU temperature to be 208*C, which is absolutely impossible...
    Does anyone have the same problem? I searched around and it seems I'm not the only one, but I still cannot understand if it affects only some K9N Platinums or all...
    Thanks.

    Quote from: CBR600RR on 09-November-06, 06:51:56
    I assume you are talking about checking voltages as reported by the BIOS in the HW Monitor page, not physically checking them with a multimeter, correct?
    I'll take a look at the numbers in the BIOS, but last time I checked they were ok.
    As for raising the issue with MSI, eventually I will, even if they ask you soooooo many questions (for good reasons, I know...) that it would take me half an hour to fill that form... 
    I've checked with both and software is a little out from what a multimeter state's. Only check with a multimeter if your happy to do so. http://forums.extremeoverclocking.com/showthread.php?t=137886 offer good advise if using a multimeter .....
    The only issue I see is the AUX connector for 3.3v with ATX2.0 spec (Modular cables etc)
    Quote
    TheCleaner:
    CAUTION: This test involves using probes with the computer ON. Please only do this if you feel competent enough to be dealing with electricity. If you short rails, you could risk damaging the PSU and possibly your components. I cannot be held responsible if something goes wrong, this is merely a guide. If you feel any concern, please post BEFORE doing this, and I will be glad to help.
    Contacting MSI would be good to let them know of the problems your having

  • K9N Platinum Bios flash

    Hello, I got a K9N Platinum and I did flash is succesfull to 1.8, but did screw my windows vista drivers  :( .
    so np, C:/ is only windows for me, my files are on other drives and I installed windows again.
    but after a few restart system files get damaged again. now I want flash it back to a version with full support with the amd x2 6000+. (flasht my bios with a x2 3800+ but someone said to me 1.0 bios version dont support 6000+ so flasht it before I did put in my new processor)
    anyone can tell me the most stable version or I should flash it back to 1.0? (btw that backup I made with live update 3 is 1.8 too  ??? )
    can someone give me some advice me what are the best options for me? many thanks.

    Quote from: Arcur on 16-September-07, 06:01:22
    everything works fine now, but when I shut down my pc and after 5 minutes I turn him on, the computer starts but he lost the videocard driver  ???
    When I install the driver again it works fine and restarting the computer too, but a compleet shut down let him lose the driver or something.
    Is this because I dont have activated my windows copy yet or just because when I first time restarted my pc, after installing chipset drivers, he deleted some files with checkdisk again (checkdisk dont start anymore now when starting up windows only just once, but windows did start succesfull after checkdisk without errors in windows).
    I really dont know if this something has to do with my bios, but windows did never start checkdisk before starting up my OS and del. some files or something. If you dont know what this is I gonna try XP I think, because I almost want to trow my pc out of the window 
    EDIT:
    Did delete the driver and let Windows install it byhimself instead of the exe file from Nvidia and now he dont lose the driver info anymore when I shut down my pc  :D really I dont know, but strange things are computers or windows just suck
    "but strange things are computers or windows just suck "
    Its Vista... make sure that vista is up to date... especially of those patches:
    Microsoft Issues Windows Vista Hotfix for Gaming: https://forum-en.msi.com/index.php?topic=110767.0
    Update for Windows Vista (KB938979) - Performance Update: https://forum-en.msi.com/index.php?topic=110273.0
    "everything works fine now, but when I shut down my pc and after 5 minutes I turn him on, the computer starts but he lost the videocard driver  ???"
    update vista via windows update and re-install the drivers...
    Have you tested under XP? i don't expect such problems there..

  • NEW k8n sli platinum / diamond bios (MS7100) 3.62 *BETA*

    heres the newest BETA bios for the ms7100  i have it on my k8n sli platinum but should also work on k8n neo4 sli diomond.REMEBER THIS IS A BETA USE AT YOUR OWN RISK!!!!!!!
    solves the 20 second cold start / reset button problem for me
    modded version  http://msi.designlab.info/attachment.php?attachmentid=2391&sid=c1b9a434a52cbfa38725792e29ee4322
    unmodded version  http://msi.designlab.info/attachment.php?attachmentid=2390&sid=c1b9a434a52cbfa38725792e29ee4322

    Quote from: Satellite on 25-July-05, 23:49:23
    Does it fix the "2.5 minutes before post starts" problem?
    Oh that is a BIOS problem?? I've noticed mine has STARTED doing that since I loaded this BIOS in (I had the 3.30 previously). I thought one of my hard drives was going bad or something and wasn't getting detected properly. Once I disabled the IDE controller it booted up in no-time. I rebooted again, enabled it and it posted right away. Weird stuff...
    **EDIT** I just found this link in another post. Going to try it out and see if it works.

  • Neo4 Platinum 1.6 Beta Bios For 219 Bug...

    Neo4 Platinum(7125 only) Beta Bios For 219 Bug...
    I got this 1.6 Beta Bios from MSI today. It's suppose to cure the 219 Bug....
      http://www.lejabeach.com/MSIK8N/k8nneo4ultra/W7125nms160.rar 
    I have flashed from this download and the Bios is OK. Report your findings....

    i have a Neo 4 Platinum SLI, my board ID is MS-7100 but after I d-loaded & unzipped the rar file,this bios says MS-7125, & am currently running the 1.5 beta bios, it  works fine, AMD64 3000+ Winchester, running stable at 2350 Mhz, (261x9), CPU & Mem 261  FSB, 1:1 Ratio, HTT4, this bios meant for the MS-7125 board ONLY right?
    Thanks  =)
    MY Self-Built System Specs: Black  13 Bay Thermaltake Armor Case, 3- 120mm blue LED fans & 2- 80 mm fans, Antec NeoPower 480 Modular PS, MSI Neo4 Platinum SLI, AMD 3000+ Winchester processor, Zalman 7000-Cu Blue LED Heatsink Fan, 2x512 mb Corsair PC 3200XL PRO Memory, MSI X800XL VID card,(Dual DVI, HDTV out), equipped w/ Artic Cooling ATI5 Silencer heatsink & fan,  Currently Running Omega Cat 5.6 Drivers, ATI HDTV Wonder, Gyration full size  wireless keyboard & mouse, 2 Seagate 160 gig Hard drives,w/ NCQ, in a Raid 1 array on the Nviidia Raid controller, O.S. is MS Win XP Media Center 2K5 w/ Remote, LiteON DVDRW SOHW-812s DVD drive, 19" Balance, ( gift from Wally-Mart)  LCD Monitor.

  • K8N NEO4 PLATINUM SLI BETA BIOS

    WHERE CAN I DOWNLOAD IT? DO I HAVE TO INSTALL IT FROM FLOPPY?

    which one is the BETA BIOS? none of them seem to be a BETA?
    Model Version Size Platform BIOS BIOS Date Counter
    K8N Neo4 Platinum SLI (MS-7100) v. 3.6 353 kb AMD Award BIOS 7/22/2005 
    1. This is Award BIOS release.
    2. This BIOS fixes the following problem of the previous version:
    - Update CPU ID for E6.
    3. 2005/07/22
    Model Version Size Platform BIOS BIOS Date Counter
    K8N Neo4 Platinum SLI (MS-7100) v. 3.3 358 kb AMD Award BIOS 5/10/2005 
    1. This is Award BIOS release.
    2. This BIOS fixes the following problem of the previous version:
    - Update SiI3132 Raid ROM version to 7.2.18.
    - Update NVRAID version to 5.27.
    - Update NVPXE version to 2.12.
    - Update NVMM version to 4.94.
    - Update CPU ID for Sempron E3 2000MHz/59W.
    - Update CPU ID for Sempron D0 1800Mhz/59W.
    - Support K8 Dual Core CPU.
    3. 2005/05/10
    Model Version Size Platform BIOS BIOS Date Counter
    K8N Neo4 Platinum SLI (MS-7100) v. 3.2 358 kb AMD Award BIOS 3/30/2005 
    1. This is Award BIOS release.
    2. This BIOS fixes the following problem of the previous version:
    - Update SiI3132 RAID ROM version to 7.1.05.
    - Update CPU Microcode for Sempron D0 2000MHz CPU.
    3. 2005/03/30
    Model Version Size Platform BIOS BIOS Date Counter
    K8N Neo4 Platinum SLI (MS-7100) v. 3.1 359 kb AMD Award BIOS 2/21/2005 
    1. This is Award BIOS release.
    2. This BIOS fixes the following problem(s) of the previous version:
    - Updates NVPXE version to 2.03.0469.
    - Updates CBROM version to 1.47. 
    Model Version Size Platform BIOS BIOS Date Counter
    K8N Neo4 Platinum SLI (MS-7100) v. 3.0 359 kb AMD Award BIOS 12/31/2004 
    1. This is Award BIOS release.

  • What is the latest beta bios for Msi 975x platinum PU edition mobo??

    Anyone knows? And where can i get it?? Is it safe to install? I currently have the latest oficiall drivers of 7.4.

    If you do not have any problems, there is not reason for you to flash to another BIOS-Version.  You are already using the latest BIOS available. The BIOS of a computer IS NOT a driver.  I am sure you know that, but since you keep calling it a driver, I want to be sure that this is clear to you.  Get your system running stable first before you start worrying about putting on another BIOS: https://forum-en.msi.com/index.php?topic=103441.0 (please read!!!).
    Now, if you are aware of all that, and still want to try a beta BIOS, have a look here:
    http://free-ri.t-com.hr/zbrnelic/

  • K9N Platinum Supported CPU's

    Hi everyone,
    My question is fairly straightforward.  I currently have a MSI K9N Platinum AM2 NVIDIA nForce 570 Ultra MCP in my HTPC.  Long story short I found out that my CPU was not powerful enough to decode 1080p content so I have purchased a new CPU, a  AMD Athlon 64 X2 6400+ Windsor 3.2GHz 2 x 1MB L2 Cache Socket AM2 125W Dual-Core Processor: http://www.newegg.com/Product/Product.aspx?Item=N82E16819103228
    According to the CPU support list here:
    http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=252&maincat_no=1
    I should be able to use this processor with my motherboard with BIOS 1.A, so I downloaded Live Update and flashed the BIOS to 1.A (I believe it now shows it as 1.10, though I am not sure where that is noted in POST) in preparation for the new CPU (the flash went fine).
    I am wondering if anyone has any experience using this motherboard with this CPU?  Is it truly compatible or the CPU simply too new an edition for my motherboard?  I can probably still cancel my order and get a 5600+ or equivalent if necessary.
    I appreciate any feedback/responses.

    Quote from: Bas on 11-March-08, 00:59:10
    I bet it's your videocard not handling it very well.
    Somewhere rings a bell that nVidia is lacking hardware decoding with videocards, but can't remember exactly what it was.
    Well that is the long story short part  :D.  In a nutshell yes it is my video card, I have a 7900GT and essentially nvidia's purevideo decoder for HD content has NEVER worked properly.  This basically means that the CPU has to handle the entire decoding load, which my old CPU is incapable of doing (hence all the stuttering, audio/video out of sync issues I get).  Basically I had two options:
    A) Buy an ATI, one of the 3xxx series that actually does x264 decoding
    B) Replace the CPU with a faster/better/dual core one (many codecs can now use dual-core CPU's for decoding HD content)
    In the end I made the decision to replace the CPU to resolve the problem because while buying a 3xxx series card does appear to work WONDERS for HD content decodes (it reduces the CPU load to 5-10% in some cases) if the file is encoded in some non-standard way that the GPU decoder doesn't recognize the load is going straight back to the CPU (like my Nvidia 7900GT is doing).  This way I figure I get a better CPU and it should be able to muscle it's way through decoding anything I throw at it.  If I need to replace the GPU someday or want to do it in order to reduce the load on the CPU I can always look into one of the 3xxx series (I hear that the nvidia 8600's might actually do some HD decoding as well) though I have really become skeptical of ATI cards lately.

  • K9n Platinum Won't Post!!! Memory Incompatible or Mobo failure???

    Like so many others, I am having trouble with my K9N PLatinum.  When I turn the system on, everything powers on, CPU fan, case fans, leds.  It begins to post, no video, but the D bracket just hangs on (1, 3, 4, red and 2, green).  I have tried all of the usual troubleshooting.  Using just one stick of memory in each DIMM slot, reseating CPU, only having CPU/memory/video card plugged in.  I even went and bought some cheap RAM from a local retailer and the same thing, D bracket just hangs.  Taking out battery, resetting CMOS switch, etc.  This build has been very frustrating.  I have read there are BIOS updates, but have never updated bios before.  How would I do an update when the system won't even post?  PLEASE HELP!!!
    System:
    Am2 +3800
    k9n platinum
    ocz gold 667, 4-4-4-12, 1.8v
    bfg 7600gt oc
    80g wd hd

    Richard
    I got it to post and install windows on the Kingston valueram.  I did a live update via MSI's website to BIOS version 1.2.  But version 1.2 would still not post using my OCZ memory.  I wanted to try to flash the beta 1.31 bios, ut I am having difficulty flashing the beta 1.31 bios version ins DOS mode.  Has anyone else done this?  Also, when is MSI going to put the newest bios version up for Live Update.  That would make a lot of unsatisfied customers, happy.  I was about ready to return my board and go ASUS.  But I wanted to stick it out with MSI because I like you guys the best!  Any info on flashing bios would be great! AMD

  • K9N Platinum issues

    I just bought an MSI K9N platinum mainboard with an AMD Athlon X2 4200+ cpu and Corsair Twin2X2048-5400C paired memory set. At first the bios would instantly crash but I solved that problem by by setting the voltage to 1.9v and manually setting the timing to 4-4-4-12 and forcing the clock to standard 667mhz (5400C is 675mhz). This allowed me to boot but both windows and windows setup would get a BSOD almost strait away (different one nearly every time). I then raised the voltage to 2.1v and this allowed me to log into windows but if I try to do anything stressful such as games or benchmarking it will run for a random amount of time (not usually longer than 5 minutes) and then get a BSOD. Occasionally background applications randomly crash and sometimes I get a BSOD for no reason in windows (not often). I ran memtest86 for 8.5 hours and it showed no errors. Ive updated the BIOS to the latest version. Any body have any idea whats wrong? I can usually use windows fairly fine but no games.
    Athlon X2 4200+ AM2 (89w)
    MSI K9N Platinum
    2Gb Corsair TWIN2X-5400C XMS2 DDR2 675Mhz (2x 1Gb matched pair)
    Sapphire 512mb Radeon X1900XT
    3x Seagate SATA HDDs
    1x Western Digital SATA HDD
    Creative Audigy 2 ZS
    Compro DVB-T300 Digital/Analogue TV Card
    ThermalTake Purepower 480w PSU
    Thanks.

    Quote from: OuTLaWOwnz on 22-June-06, 12:44:21
    So this one will be fine? http://www.silverstonetek.com/products-65zf.htm
     hope your right because thats a lot of money to spend if its not the problem. Is there a test or tell tale sign of low power so I can be sure?
    USERS:
    "Artifacts and freezing on Sapphire X1900XT
    Hello, I have a Sapphire X1900XT running at stock speeds and stock cooler. At default fan settings I have no problem running not so power hungry games but when I start Oblivion (1600x1200 2xAAA, 8xAF) the game runs good but about in 15 minutes (varies on the stressfulness of scene) the screen becomes garbled and computer stops responding. VPU recover sometimes manages to restart the card but it crashes again within seconds."
    Resolve:
    "I bought a Silverstone 650W Zeus and all problems are gone! No more weird fun speed changes under different loads, no more lockups!"
    yep im sure its your PSU isnt enought. users confirm that, also official recommendation is "you need atleast 30A on +12V(450-Watt power supply or greater,30 Amps on 12 volt rail recommended) The power supply requirements for that card is 30 amps on a single 12v rail or 22amps on 2x12v rails(better get Sinlge Rail PSU, avoid dual rail)"
    "Is there a test or tell tale sign of low power so I can be sure?"
    -you can also borrow some recommended good brand powerfull enought PSU to test it before buy it, to be sure to resolve problem.
    test you can see by yourself lockup, reboots, abnormal program termination,issues and other are expected when PSU isnt enought when your VGA starting to drain power. you can make test, decrease drasticly GPU Core and Memory Frequency and you must be stabilised.but that isnt solution it is just for testing.

Maybe you are looking for