K9N Platinum lock ups

Hi Guys, I am building a new pc and I am having lots of problems. The main one being the pc will lock up after a few mins of being on. I have read it could be a memory problem, but I am not sure.
The System is....
CPU: AMD X2 Dual Core AM2 Athlon 64 3800
Ram: OCZ 1GB Kit (2x512MB) 240Pin PC2-6400 800MHz Dual Channel GX XTC Gold
Power supply: Enermax 535Watt Power Supply ATX12V & EPS12V for EEB, CEB
Video Card: XFX 7900GT PCI-E 256MB DDR3 DUAL DVI
and the K9N motherboard.
Is the Ram an issue? Would I be better off exchanging the ram for something else? Could anyone reccomend ram that will work with this board?
Thanks a lot for your help guys.

Thanks for the suggestion, unfortunately I have just tried that but its still locking up.
I have had a look in the bios to set all the memory settings manually, though I am not sure what I set to what. Apparently the corsair ram has 5-5-5-15 timings but I do not know what these relate to in the bios.
I guess the CAS#Latency(TCL) should be set to 5 then I'm not sure what to do. The options I have are
Min RAS# Active Time(TRAS) With the option of 5CLK to 18 CLK (This is set to 15 as mentioned above by Kakarocht)
RAS# Percharge Time(TRP) With the option of 3CLK to 6CLK (I guess this is one I should set to 5, currently at Auto)
RAS#to CAS#Delay(TRCD) With the option of 3CLK to 6CLK (I guess this is one I should set to 5, currently at Auto)
ROW to ROW Delay(TRRD) With the option of 2T to 5T (I guess this is one I should set to 5, currently at Auto)
ROW Cycle Time(TRC) With the option of 11T to 24T (Currently set at Auto)
There is also
Bank interleaving which is enabled
CMD-ADDR Timing Mode which is set to 2T
Software Memory Hole which is Enabled
Sorry to be a pain and keep asking all these questions, but this is really confusing me.
Thanks yet again

Similar Messages

P7N SLI Platinum lock-ups

My specs:
Q6600 stock speed
Kingston HyperX pc8500 2x 1gb. I manually set it to it's rated timings, voltage and frequency. I have also tried different ram, from Exceleram and it makes no difference.
2x Asus EN8800GT 512mb cards (tried using just one card too, tried switching to a different 8800gt card from sparkle too, no change.)
HDD: Have tried several hard drives, pata and sata from probably all the manufacturers, i dont see why i need to post their specs since they problem persists nomatter what hdd i use.
Windows XP SP3 proffessional.
nothing else is in the system, i removed every piece of hardware, like sound card, optical drive, etc. to isolate the problem.
Power supply: Thermaltake ToughPower 700W
BIOS Version: the beta bios posted on this forum that supposedly fixes the video corruption bug (it doesnt). Also tried 1.0 and 1.1
The problem: random lock-ups. Sometimes it doesnt happen for 2 days and then BAM! Its happening every 15 minutes now. It might stop happening for another 12 hours and start locking up again. It only ever happens when im working in 2d applications like browsing, using messenger or IRC, watching videos on youtube or in a media player, or just moving files around or anything mundane like that. it once happened when i wasnt touching the keyboard or mouse at all, i was waiting for some files to finish copying over LAN. I also get the famous video corruption but it is EXTREMELY rare, like once a month. It crashed the last time the video corruption appeared, once i tried to click the player to pause, the system crashed. The system will never lock up while playing games, i play medieval II total war for days without any problems. The store i bought the p7n from tested it for me and they said it worked fine, but they used an ATI card so that may be a clue? Then again, they are really incompetent and didnt run the right set of tests, and ignored what i had told them about the nature of the crashes.
Detailed description of the events: System freezes, first everything except the mouse is frozen but if i try to click with the mouse, it freezes too and the screen flashes a black screen every few seconds. it never recovers and i have to shut it down by holding the power button for several seconds. some of the 2d graphics in windows get corrupted with artifacts, and the mouse does get heavily corrupted usually.
What i've tried:
I thought the mobo was defective but it isnt, i got a new mobo from the store and it has the same problem.
Tried working my way through every combination of memory timings, frequencies and voltages that i thought might make a difference but it has no difference on the crashes.
All the hardware works perfectly in my Asus P5N32-E SLI motherboard (i bought this msi mobo for some different reasons that i wont go into here), so theres nothing wrong with any of my components.
The only item i've not had the oportunity to switch with a different one is the power supply, but again, it works perfectly with all other motherboards that i've tried.
Is this possibly related to the video corruption bug? Does anyone have any idea when the next bios release is due? Please help, it sucks to buy an expensive motherboard that just doesnt work. i'll have to buy a 3rd sli mobo if I cant fix this.
PS: Is it not possible to regulate fan speed for sysfans connected to the mobo's fan connectors? My asus mobo had great fan speed controls in the bios, if this one doesnt have any such options, i call that ridiculous.

I appreciate your effort, guys. I've tried running the memory in 800mhz and on auto timings and on some other timings too (i was kinda desperate and i messed around with the memory configuration for days with no success), and tried auto volt (it gets set to 1.8 which the memory is rated for at 800mhz) and tried 1.9 and 2.0 and 2.1 and 2.2 and i've tried completely different memory modules too that i borrowed, and tried running in single channel with both modules and running just 1 module. none of these experiments had any effect on the crashes :\. But don't you think this could be related to the video corruption bug? I always thought it was, since this problem doesnt seem to happen for me when there is an ATI card in the system. Not that my 8800gt cards are defective in any way either, they are rock solid on my other motherboard.
I have one more theory, some weird inexplicable compatibility problem between this particular PSU and this particular mobo. Think it's a possibility? The psu is the only thing i have not switched out for another component, every other component i have switched for another one that was known to be working fine.
also, there is the extremely distant possibility that the issue is caused by an issue that the mobo might have with BOTH the kingston and the excelleram modules that i tried, however this seems far-fetched. but this problem is a fact and SOMETHING is causing it. i've eliminated almost everything i can think of.

K8n neo2 platinum lock-ups

Hello everyone, well here is the deal, I ust built yesterday my first amd64 system, specs are as follows:
amd athlon 64 3200+ Clawhammer
512mb ddr400 (single stick)
120gb sata drive
1 dvd unit, 1 dvd-ram unit
geforce 3 ti 500 (i know, i have to replace it)
soundblaster live! 24-bit
stock case psu
Before that, i had the same config but with an athlon xp 2600 + witch an msi k7n2 delta2, it worked fine. But this one, as soon as i start gaming the game will randomly slow down to a crawl and then lock-up the pc... I used to have this same problem with a kt4v which i replaced thinking it was gone bad, though i did notice on that board the 3.3v line was quite faulty, well same thing is happening here, at least i think
If i leave Corecell opened while gaming, the game will suddelny minimize, corecell will pop-up with an alarm and show about 2.8-29v on the 3.30v line... now before i go out and spend some money on a new psu, I need to know if this could be it ? or could it be the old gf3 acting up?
As i said, this same thing used to happen to me with an old kt4v paired with my old athlon xp 2600+, it stopped happening when i switched to the k7n2 delta2 but here it is back again...
help please!

Well I´m back, meaning that my lock-ups are back
Although this time I think they're not voltage - psu based... all my voltages are on their normal conditions, temps are doing just fine, I can even game with no issues, the problem is my computer is randomly locking-up
I have read and re-read this post, Because I am having the same symptoms as this guy did, just random lock-ups , no time interval, the conditions cannot be reproduced , so Im guessing its either
a) hardware
b) bios settings/bios
More info: I upgraded my bios to syar's moded 1.A, turns out I'm running on a Venice 3200+ (not clawhammer as I stated before) ... Cnq is disabled, so is spread spectrum, so is aggresive timings, no dynamic overclocking, no fast writes, no sideband addresing, memory timings are at the manufacturer's specs, no overclocking whatsoever, fsb 200*10 , htt 5x...
Just so u know, the computer has been powered on for the last couple of nights downloading and It runs fine idling, but when i start surfing, or doing whatever it will lock up on a random time/condition basis (it hasnt locked up yet while gaming though)

BSOD / Lock-ups with new Q9550 in P965 Platinum

MSI P965 Platinum Mobo
E6700 CPU, recently upgraded to Q9550
Zalman Cu heat sink + fan.
4GB Corsair 6400 C4 (4-4-4-12 800 MHz)
MSI 8800 GTX graphics
Auzentech Meridian sound
2 x 36GB Raptors RAID 0 (System)
2 x 250 GB Western Digital Caviar WD2500KS RAID 0 (Data)
Corsair HX620W PSU
All drives attached to the ICH8R Intel RAID controller.
BIOS: 1.8 (latest)
Vista Ultimate 32 bit SP1 + latest patches
Intel Matrix Storage Manager v8.6
Hi all,
I have run with the above hardware specification since Jan 2007 without experiencing any hardware problems at all. Two weeks ago I upgraded the CPU from an E6700 dual-core to a Q9550 quad. I was a little concerned about doing this, because the P965 supports a max FSB of 1066 and the Q9550 is rated at 1333. In any case, I Googled around and found that some flavours of the Q9550 had been tested on my mobo (http://www.cpu-upgrade.com/mb-MSI/P965_Platinum_(MS-238).html) and also MSI list the Q9550 stepping C1 as being compatible so I took the leap.
Early indications were good - Vista detected the new chip and I rebooted when prompted. However, in the space of two weeks I have experienced around one or two BSODs per day STOP 101 or 124 codes. Hmm!
I have switched back to my trusty E6700 chip and the system is then as solid as a rock. I see 3 possibilities here:
1.The Mobo website (MSI P965) lists the Q9550 stepping type C1 as being compatible. There is no mention of E0 or C0 which seem to be the other two variants. I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping. Is there any way to tell which on I have - I tried with CPU-Z but didn't spot the stepping type? In any case, could this be the problem or am I off-base?
2. It's possible I have a faulty chip. How likely is this do you think? I could ask for a swap with Novatech but could be back in the same boat, and they will reject the return unless it is 'proven faulty'.
3. I need to mod the clocking on my rig to support the Q9550. If so, can anyone advise on what I should do?
I doubt the problem is caused by an OS factor as I ran some tested in an XP pre-boot environmet and still got the lock-ups.
What should I do? i don't really want to ebay the chip at say a £50 loss if i can help it.
Many thanks in advance.

Quote
I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping.
No, the OEM Order Code is different, and the sSpec Number also.
Have a look at these links
Q9550=SLAWQ=C1--> http://processorfinder.intel.com/details.aspx?sSpec=SLAWQ
Q9550=SLB8V=E0 --> http://processorfinder.intel.com/details.aspx?sSpec=SLB8V

PSU causing lock ups when gaming? K9A2 Platinum

I am having black screen and occasionally grey screen lock ups when Im playing games. It can happen within 10 minutes or up to an hour. I have to press the power button to restart and dont get any windows errors or blue screen. I have no issues when watching videos or just tooling around. My PSU is a OCZ600MXSP and Im thinking its not up to spec. I have everything running stock. Is it likely my PSU doesnt cut it or is the black/grey screen freeze thing an cpu/gpu overheating issue?

All of my drivers are up to date (I do use driver sweeper as well). It happens pretty much in all games, from BFBC2 and TF2 to some crappy kid game my son plays online (Wizard 101?). Im not sure what the temps are under load but at idle they are good (cant recall what exactly they were but were in the proper temp range). My monitor has just finally died as Im typing this on my laptop (bad caps on power board ) so Ill test the temps while gaming when I can hook it up to my big LCD.
Could the lock up with no blue screen/error report indicate a component overheating?

K9N Platinum and Corsair CM2X1024-6400 **UPDATE - FIXED**

I'm trying to help a friend with their new K9N Platinum motherboard. We got everything installed successfully, but after getting into Windows, the machine will just freeze up randomly doing anything, software install, whatever, within a minute, or sometimes as long as 5 or more minutes.
Basic specs:
K9N Platinum motherboard
Flashed to BIOS version 1.4
AMD Athlon64 X2 3800+ (65W) socket AM2
BFG Geforce 7900GS
500W PCI-E power supply
Wester Digital 120GB 7200rpm SATA HD 8MB cache
Single 1GB stick of Corsair CM2X1024-6400 RAM (DDR2 800MHz) - Brand New - DIMM slot 1
Windows XP Professional with SP2 and all windows updates installed. (using IE6)
Installed all latest drivers from MSI's website for this board.
We tried 1st with DRAM timings on auto, then tried to set the timing manually according to Corsair's spec sheet for this module, including memory voltage at 1.9V.
We think it might be a bad memory module, because after getting into Windows, we run memtest, and errors are detected within the 1st minute. We have RMA'd the RAM module. I'm wondering though if we just didn't have the timing for the memory set correctly in the BIOS.
Is anyone here runnning this exact memory successfully, or is this board incompatible with this Corsair module? If you are running successfully, did you have to change the SPD timings manually, or are you running using the SPD Auto setting?
If you had to use manual setting, any help with the values to set in DRAM Timing would be greatly appreciated. As much detail as you can provide would be great. Thanks for your help.

Ok, still having major problem with running world of warcraft. This PC freezes/locks up in the game every single time within 5-10 minutes of play no matter what we've tried so far. This is not a shutdown or restart problem, just a freeze/lock-up symptom. I'm getting a bit frustrated at this point. No other problems in windows are encountered. We can work in windows with any other application, like adobe photoshop or any other software, with zero trouble. I'm beginning to think this is video card related somehow with this 7900 GS card.
For added info, the video card being used is this;
BFG Tech BFGR79256GSOCE GeForce 7900GS 256MB 256-bit GDDR3 PCI Express x16 Video Card
Chipset Manufacturer NVIDIA
GPU GeForce 7900GS
Core clock 525MHz(vs. 450MHz standard)
PixelPipelines 20
Memory Clock 1320MHz
Memory Size 256MB
Memory Interface 256-bit
Memory Type GDDR3
3D API
DirectX DirectX 9
OpenGL OpenGL 2.0
Ports - DVI 2
The mouse used is a logitech USB track ball mouse if that has any bearing on anything. No mouse troubles though, just thought I'd mention it.
Here's what we've tried so far;
Updated to BIOS version 1.4. This was done after the Windows XP install though, so not sure if something is hosed up here.
1) We set the RAM timings to 5-5-5-12-2T and 2.1Volts in BIOS manually, as per direct recommendation from Corsair.
1a) Ran memtest all night for about 9 hours straight and no errors at all detected. So I'm guessing this isn't a RAM problem really, but who knows .
2) Installed the Windows XP SP2 Hotfix for Dual Core Processors - hotfix KB896256
3) Installed the AMD Dual Core Optimizer from here -->http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_13118,00.html
4) Updated the Nvidia system drivers with the nForce 550/570/570/590 SLI (C51+MCP55) driver package 9.19 WHQL from MSI's website here--> http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=730&kind=1
5) Currently running Nvidia video driver version --> ForceWare Release 90 Version: 93.71 Release Date: November 2, 2006 WHQL Certified.
6) Ran a complete Direct X diagnostics via dxdiag. All tests passed successfully.
7) Tried to install the AMD Athlon™ 64 X2 Dual Core Processor Driver for Windows XP and Windows Server 2003 Version (x86 and x64 exe) 1.3.2.16 from here -->http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_13118,00.html
But it would NOT install because it says I have to first uninstall the current driver via add/remove programs, but it's not listed there, before installing this one. So, I have no idea where to look or how to do this, I'm afraid of messing up the processor driver. Can someone explain how to install this driver, and would not having this installed possibly be a potential cause of the game lock-ups?
I don't know what else to do. Could the version 9.19 Nvidia SATA or IDE drivers I installed be causing these game lock-up problems? If so, do I just go into device manager and just rollback drivers for all of the devices listed under the "IDE/ATA ATAPI Controllers" in device manager?
Again, this was a fresh windows XP Pro install on a newly formatted hard drive. Obviously something is fubar, but I'm running out of things to try. Maybe going into BIOS and "load optimized defaults" and start over?
Lastly, the tech specs on newegg.com for this video card say "A 350W PCI Express compliant system power supply (with 12V current rating of 22A or more)" is needed. Since the 500W power supply we're using has 2 separate 12V rails rated at 20A each, could this be the problem?? I'm open to suggestions. Thank you.

K9N Platinum doesn't read SPD correctly

K9N Platinum doesn't read SPD correctly. When i put any RAM to my computer and set timings to auto it always set timing to 5-6-5-15 ignoring SPD on RAM/RAMs.
Is it only my board problem? or all K9N Platinums?
I have 601-7250-020....
i use 1.5 bios,and i am going to update to 1.6 today.

Yes you are right: http://www.corsairmemory.com/corsair/products/specs/TWIN2X2048-5400C4.pdf
However, MSI could change something in the BIOS to make your memory work properly.
As the Jdec standard is Intel system testing only (if I'm not mistaken) it could well be that the AMD CPU can't work with those values, so it ups them a little.
Don't forget, Intel uses "CPU -> Chipset -> Memory", but AMD uses "CPU -> Memory"
The only one that can answer this is Corsair, so I suggest you ask them why the SPD is different on AMD's.
They know that, we don't.
But it's not strange that AMD's have higher timings.
In any case, it has nothing to do with the board, as the AMD's have an in-CPU memory controller! Intels do not have this.

Pages '08 lock ups

A couple months ago, I started having issues with Pages '08. It would lock up while I was typing, or even something as simple as scrolling the page down. All I would get was the little rainbow wheel and a locked up document. At first I thought it was just the one file I was working on, but now it happens all the time. It locks up so bad sometimes that it forces a restart of the computer. No other programs are having this issue. Should i just reinstall Pages '08 from the disc or what. Cause this has made my main wordprocessing program completely useless. I'm on Mac OSX 10.5.8

Update:
Well I think I got it figured out. For some reason, the spell checker was causing the problem. I've always had it set to "Check spelling as you type", but for some reason that is now causing Pages to lock up. So my work around is to simply turn off the "Check Spelling as you type" option, and now there are no more lock ups.

Terca 9100 lock ups

Hi!
I recently got my hands on a second hand tecra 9100. I got it free since the previous owner complained about random lock ups or freezes. As i've testaed the laptop myself i experienced this aswell. It can freeze just about anytime but i've never had it running flawlessly for more than 20 minutes i recon. Sometimes it also refuses to start up. I do not know if this is a lock up in the initial startup sequence.
Anyway it will lock up even in bios and i have dissassembled it and put it back together, replaced the RTC battery (with a non rechargable) and removed any hardware not crucial for useage (i.e WiFi card, extra RAm modules, modem card).
I'm clueless, anyone got any idea of what to try next?
Regards Simon

I think you cant fix it by yourself
In your case the ASP should check the notebook and if necessary replace the faulty part/device.

R835 P56X lock ups

From day 1 (purchased a month ago) I'm still having lock ups with this laptop! After few hours of use the screen goes black (sometimes blue), if I try to revive it the fan kicks in at full speed sounding like a leaf blower!
I've reinstalled Win7 with the latest drivers, installed a new SSD instead of the HD and this problem keeps re-occuring randomly (daily)!
I certainly would appreciate any ideas!

I replaced my HDD with a OCZ Vertex 3 SSD for my R835-P56x. It boot in seconds and runs nice and fast, but I get lock-ups and BSOD after several hours (as described above). Not sure if it had the problem with the HDD, because I didnt use the PC very long before upgrading. I am also running a 800MB Dataram RAM Disk (Version 3.5.130) for browser cache, which I suspect could be the culprit. My bios is 3.90 (7/31/2012).
Portege R835-P56x, i5 2410M, 16GB RAM, Vertex 3 SSD 240GB.

Crashes and Lock-ups

I have been experiencing crashes and lock-ups in Premiere CS4.
Last week I was running Encore to burn a DVD and when I noticed the processor was running flat out. I decided to run Core Temp to check the temperatures. At that point my encoding stopped and Encore locked up.
Now I usually have Core Temp start when I load Windows. I have now disabled it and when I ran Premiere last night guess what? No lock-ups. Now this is early days but I suspect Core Temp might be the problem. I hope so. I'll report back with my findings when I have had more time to experiment.
PS I'm running Windows XP SP3, Quad Core 6600 and 4Gb RAM
Cheers,
Tim

You posted near the end of a similar thread in the CS5 forum. I branched your post into a new topic and moved it here to this forum. My post #1 was a request to be more careful where you post.
If you want to see where you originally posted, click on the word "thread" in the phrase "Branched from an earlier thread", located at the top of the post list.
-Jeff

Lock ups XF-I and X1900

Hi I am running
EVGA 33-K8-NF4-AX with the latest Bios
Radeon x900xtx
2 gig OCZ 2-3-2-5 ram
Antec true power 2.0 550watt PS
Sony 80a Dvd burner
70 gig raptor sata dri've
300 gig seagate sata 3 dri've
Sound Blaster Xf-I extreme music
Windows XP SP2
I get random lock ups under any D3D or OpenGL game as long as im on the desktop my sounds function without an issue. Previously I had been using a EVGA 7800 gt with no problems. Under the 7800 gt I did not have any lock u
ps.
Before installing the Radeon x900xtx I did a format of the dri've and a clean install of windows xp with SP2. I have tried catalyst 6.4 and the lock ups were very frequent in catalyst 6.3 they are less frequent and more random. I have upgraded to the latest drivers for every other component on my pc. I posted this here and also I have sent in a ticket to ATI because if I remove the XF-I and go with the real tek 8 channel onboard sound all of the lock ups disapear. When the XF-I is in the pc and it locks up it goes into a sound stutter at random times in any D3D or OpenGL game

I don't think so, Lion with the latest updates is running fine for most of us.
Post the log for your next lockup or the previous one if you can isolate the timeframe.
/Applications/Utilities/Console > system.log

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

Total lock-ups with fan running - translate system.log file please!?

Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.

Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.

Leopard lock ups.....

HI, I thought i might share this with you if you are having lock ups in leopard on a G5 with an ATI X800XT graphics card. I have a G5 2.7 with a fresh install of leopard and with the aforementioned card and was getting constant lock ups which resulted in me having to hard power down constantly.Also you could hear the cards fan revving quite a lot as well. If you go into system prefs and set colours to thousands in stead of millions then the constant locking up will stop. ATI and apple need to address this ASAP! But for now its a workaround. Hope this helps

I assume you tried all teh usual voodoo - reset NVRAM, performed AHT etc?
If you need a working system then I'd suggest you restore back to Tiger from your backups and then call Apple.
You could install a small Leopard test partition and have them walk you through troubleshooting steps.
It may be a Leopard driver issue or could be that your system has a real hardware problem.
Good Luck.

K9N Platinum lock ups

Similar Messages

Maybe you are looking for