K9N SLI - Harddrive shutdown (sleepmode) after reboot - PLZ HELP ME!

Hi
every time when i reboot my windows (vista) my 2x Western digital raptor discs (Raid 0) goes to sleepmode (ill can hear a strange shutdown noise from my drives) and after 5 - 15sek the drives starts again and windows starts again..
does anyone know were i can remove the "shutdown mode" on my drives??? i have the latest bios.
i only have this problem with my sata raptor drives (raid 0) and not my seagate 500gb drive

hi, this is my system:
AMD Athlon 64 X2 6000+ / 3GB RAM / 2x WD Raptor 10000Rpm (Raid 0) / 1x seagate 500gb sata / 1x  seagate 200gb ide / GeForce 8800GTS 320MB / Cooler Master Stacker 831 / Fortron/Source Epsilon 700W, Blue Fan,
the sound comes only from my raid drives.
i had this problem since i got my computer for about 2weeks ago, BUT one of the harddrive i had about 4months and didnt have any problem with it using xp. its when i started to raid the problem appeared.
the sound is exactly like then i shutdown my computer. when i restart my system i can hear my drives "shutdown" and then to start again about 5 - 10 seconds later.
edit: this problem ONLY appears when i reboot my system, if i press the "reset" button my on computer the hard drives doesn't go to sleep mode.

Similar Messages

  • MSI K9N SLI: acpi, shutdown, ethernet "not enough resources"

    I recently got the MSI K9N SLI, new ram, gpu to upgrade my computer. I did a fresh install of windows xp pro but the computer kept going into some hibernating/power saving mode suddenly during install of windows. (The power led blinks slowly) After this I can not restart until I switch the I/O button at the back of the psu to off.
    -I remembered seeing some options in the bios so I switched off the ability of pci/pcie devices to recover from hibernation/sleep mode.
    -The install of windows then got a little further, until it says installing/configuring network devices. A new shutdown (this time a complete shutdown, where I can simply start the pc again at the front). This happens every time.
    -I now turned off acpi (advanced power saving... etc) in bios, and the installation of windows went fine. However...
    -Now the integrated ethernet lan devices says they cant find enough resources for it to work. So I cannot access the internet. Otherwise the system performs and runs smoothly. Have played games/music..etc.
    -Then to solve the ethernet problem I looked here in these forums where I found this post:
    https://forum-en.msi.com/index.php?topic=98742.0
    This seemed to be a solution...however, it sets the acpi function to enabled, which causes the shutdown/hibernation/sleep mode during install.
    When I disable this bios function, everything except the lan problem, works fine. However this seems to make windows install the wrong HAL or device driver for the ethernet/communication part of windows.
    It also seem that others are having trouble with their integrated lan. One person's solutin was to install a separate ethernet card, which I am going to try. But I would like to have the benefit of having acpi enabled as it seem to be an important function safetywise.
    https://forum-en.msi.com/index.php?topic=99445.msg722820#quickreply
    I can recreate the shutdown during windows install every time by enabling the acpi function in bios. Although turning it on after installing windows doesnt seem to do anything, as windows seem to already have installed the wrong driver components. It also doesnt solve the ethernet problem as this requires at least a repair-install of windows.
    I apologize for the long post but more information is generally better, right?!   
    Any ideas of how to solve this?
    Thank you to everyone who replies anything helpful! 

    Quote from: Ferro on 15-August-06, 09:25:13
    Just installed the new harddrive and this time I only disabled the ethernet lan during windows install. Then installing the amd cpu software and the realtek audio drivers.
    However I am experiencing some minor unstabilities, one restart while surfing so far. Been reading about similar problems with other k9n sli users and if more restarts happen I am returning this mb and getting an Asus. Had Asus for the three last upgrades and never had any problems. Could be a fluke of course. Heard good things about Msi though.
    What PSU are you using including the +12V@ value A? Gd luck.

  • My macbook pro 15 inch freezes up. I forced a shutdown. After reboot, system restarted to factory settings, applications/softwares disappeared, apple dropdown menu disabled, dock and icons missing, keyboard not functioning

    Hi. I'm in need of great help as I do not understand how this could have happened.
    I had my firefox on, with multiple tabs and windows as I was doing intense research for a paper. My screen then freezes up, but my mouse could still work. Having experienced this before, I immediately pressed and hold the power button till my macbook pro shuts down.
    After which, I switched it back on. To my horror, everything was resetted to factory settings: my desktop background was replaced, the fonts on the clock display were different. But this wasn't so bad.
    After which, I realised that my dock went missing, together with the icons. I clicked the apple drop down menu, and my screen hanged momentarily, and in that moment everything on the screen disappeared (including the upper dock) for a few seconds and appear again. Meaning, i cant click the drop down.
    Similar thing happened with my spotlight. Using the hot keys command-space, the dropdown appeared on the top right, but when i started to type, the screen disappeared and appeared again like before.
    Finally i checked my applications folder, and it seems like all the applications are missing, like they have never been installed before! Their folders are there, but the icons and apllications themselves aren't. No applications/software installed- not even the utilities and system preference softwares that came with the macbook.
    Luckily though, all my documents are safe. I just cant open them because my iworks and adobe are all missing and "not installed". I cant even access the internet. I'm doing this via my iPhone.
    So basically i cant do anything because my apple drop down menu is unreachable, so is my spotlight, and my apps/softwares like system preference, utility are all missing. Is there a way i can troubleshoot this? Or make my macbook work again? I have already restarted and shutdown and switch it back on again near five times.
    I know my explanation is long, but do help me if you can. I'm really at a lost right now...

    Hi
    Thanks for the help. I did what you advised, but it still did not work.
    The repair disk was successful. Unfortunately when the system restarted to boot my startup disk, I faced the exact same problems as I did previously. I also did a hardware test, but no problems were found.
    Even tried powering off and on the macbook pro again but the same problems remained...
    I tried to back-up my files too but they refuse to copy/move into my hard disk drive folder.
    Nothing works.
    Do you have other ideas? Or suggestions?
    Thanks so far!

  • K9n sli platinum shutdown at vcore 0.20V

    good day laddies & gents,
    i noticed this board would shutdown itself whenever the vcore is set above 0.15v (under cell menu). afterwards, pressing the power button won't turn "on" the system unless the ATX 24-pin connector is unplug/plug (or replugged). this issue also manifests using two different power supplies: corsair 750tx and coolermaster 450w. upon reseating the atx 24-pin cable, the system becomes operational but the same behavior will manifest, again, when the system shutdown by windows OSes.
    however, this issue does not happen if the vcore is set within 0.15v.
    has anyone encountered this strange behavior before? i would appreciate some insights, solutions, and feedback on this issue. Regards to all.

    Could be temp. related. Please say what BIOS gives.
    Could actually be a motherboard problem. Can't say actually what. Copper wires too close, metal debris in the very board of the motherboard...
    Do you run an autostarting overclock program?
    After the most recent BIOS update, did you pull power cable out and cleared CMOS.

  • N95 Reboot Plz Help!

    Hi!
    Yesterday i installed a theme on my phone (like i allways do) no problems, the theme worked fine. But today i wanted to change back to my old theme. And when i tried to open the themes folder (on the n95) it just rebooted.
    And now i cant change themes at all, every time i try to open the theme folder in the phone under the adjust menu (not sure if it is called adjust in English) the n95 just reboots. The screen turns black 4 a few seconds then the nokia loggo appears and it starts up again.
    I also updated the phone to the newest version, but i still have the same problem =/
    I am really thankful if someone can help. Don't want to by a new phone just because of this.
    Thanks in advance!!

    15-Oct-2008 04:23 PM
    eaco wrote:
    nope didn't work , when i tried to install the Theme Scheduler i get an certificate error.
    Hi eaco
    For certificate problems:
    Firstly go to Application Manager > Options > Settings and set "Online Certificate check" = Off and Software Installation = All.
    Secondly try resetting date on phone to January 1 2007 first and if that doesn't work try December 31 2006 as Symbian certificate may have expired; reset date after installation.
    The actual date is a case of trial and error and previously quoted dates may no longer apply due to the passage of time.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Smooth render/new to after effects plz help

    Hey everyone,
    Hope you guys can help me out. Im so fed up with my situation.
    I have older 720 x 576 video avi clips that I wanna use.
    I use the same source fps to render it, same size(best settings) and after it's rendered, the video doesn't look that smooth. It looks like its slower almost. If I watch original movie it's do much smoother and faster looking in a way.
    Can somebody tell me the exact settings I must have to render it as smooth as possible.
    720 x 576 25fps avi
    Thanx guys:)
    Werner

    Hi,
    thanx so much for answering my question. appreciate it.
    i saw that only certain render formats have option where you can choose codecs. is that what you mean by codecs? the only thing i have is copy the source 25fps, 720 x 576 and rendered it as avi.
    i want to import the footage that i render in after effects to premiere sometimes. dont know what format is the best.
    thanx again for all the help
    werner.

  • Error after update: Plz help

    I am facing a really strange problem and I have been banging my head against the wall for the past couple of days. I do not understand how no one else faced this error before. So quite possibly it must be my fault somehow. But heres the problem description
    I first do an insert into the oracle 9i database using ODP.NET -- this works correctly
    Immediately afterwards I do an read of the same row that I just inserted
    Immediately afterwards I do an update. The update always fails in the scenario no matter which row I am updating. All these operations are on the same table though.
    The update works just fine when there is no insert immediately preceding it.
    The error message that I get is:
    "Dynamic SQL generation failed. No key information found"
    But this does not make any sense due to:
    a) The database has the key info in it
    b) This scenario works when I use the Microsofts driver for oracle
    c) Inserts, updates work independently. They dont work only when I call an update immediately after an insert.
    DO u think there is so row locking thing going on here??
    But the error message is completely different.
    thanks for any help on this.

    well
    I finally figured out the cause of the error. I am not sure if this is a bug with ODP.NET or not but like I said above this problem only occurs when I use ODP.NET and not the driver provided by microsoft for oracle. The solution is to call fillschema before update, insert, delete into the database. The fillschema also fills in the primarykey information into the dataset. apparently I had assumed incorrectly that fill would do it, but dosent seem like it. So in order to use oraclecommandbuilder one needs to use fillschema too.

  • Playing one video after another, PLZ help!

    Hi,
    Im trying to play one video and then when this finishes i want to start another. Can anyone help in any way?
    when i do it it seems to ignore the first video and start the second straight away. any idea why?
    Thank you all in advance.
    Lila

    You should add a controllerListener to the player you create, when the media file end, jmf raises the EndOfMedia event to controllerUpdate method. You can do whatever you want at this point.
    Aydin

  • Ios 7.0.3 was updated and installed but after reboot it was still in 7.0.2

    i'm unable to update from ios 7.0.2 to ios 7.0.3 which is the latest version for my iphone 4 but it isn't updating from 7.0.2 to 7.0.3 after rebooting
    please help me what might be the problem

    I believe in the initial iOS 7.0.0 release, the "Reduce Motion" only affected the Parallax effect. iOS 7.0.3 now affects both the Parallax effect as well as zoom effect. Disabling motion now changes the zoom effect to a fade effect while the Parallax feature remains the same.

  • PLZ HELP: BB TORCH 9800: not able to start ,keep on rebooting after 70% booting. plzzz.. its urgent.

    Hi,
    i m using bb torch 9800,i installed viber app from bbworld .During instalation, it automaticaly went for restart.n till now it is rebooting everytime after every70% complition. its just like a do loop.
    1.i removed battery so many times kept back..but no way.
    2.i tried to start with safe mode for rebooting,but that also doesn't work.
    3.charged battery fully ,then inserted,stilll same condition.
    what to do? no way .i tried my best with these ideas what i got here on this foram,but didnt work.thats why i m writing seperately..PLZ HELP ,I M HELPLESS FROM LAST 7 DAYS...

    sorry bout the delay you can follow these instructions
    How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

  • K9N SLI Platinum reboots while playing games

    Hello,
    System config
    Athlon 64 3800+ x2
    K9N SLI Platinum (Bios version 1.1)
    2 * 1024 ocz 6400 gold memory
    80 gig sata 1 drive
    nec dual layer burner
    Xfx 7600 gt xxx
    floppy
    PSU Coolmax AP-450 (CX-400)
    The system is stable when I browse email and such, but as soon as I play games I'm getting reboots. Blue screen of death a couple times. I bought a couple more fans for my case (waiting to see if it makes a difference when it arrives). It may be getting to hot. I have been reading and perhaps the PSU is not good enough or compatible. I haven't checked the memory yet, But i would think that it would reboot consistantly not just in games if that were a problem. Does anyone have a solution for me?
    Thanks,
    LTBob

    Quote from: eddie_g on 19-July-06, 19:06:28
    I had the same problems as you have.
    The fix I did was, downloaded the drivers for AMD dual core processors from the AMD website.
    Make sure you have your RAM set to 2.1V.
    It's nothing to do with the PSU.
    "It's nothing to do with the PSU."
    cant agree, there is alot of issues with the same symptoms. it may crap or overload PSU also.

  • MacBook (2007) screen black after reboot/shutdown

    Hi all I hope you can help me.
    I have a MacBook C2D 2GHz, 2gigs of ram from mid 2007.
    I cant remember when the problem appeared but maybe 6 months ago.
    Every time my macbook is rebootet or shutdown after an update or if it runs out of battery the screen remains black. The sleep light stays constant on but the chime is played and cd drive makes it usual short start up sound.
    I can hear the harddrive working and after maby 30 sec, the screen comes on but its all whiteish with a black stripe down in the right side and stays like this, other times the screen comes on with the desktop but flashing/bounching
    If I hold down the power button to kill it off and hit the powerbutton again the same thing happens.
    The way I fix it is to power off, take out the battery for about 10 sec. put it back in and hold the trackpad button down or put two fingers on the trackpadand power on, it starts normal with the grey screen and the littel apple logo and boot normally to the desktop. But today today it took me 7 atempts with the above method before it worked.
    Is my screen about to die or is it software related.

    I have the same problem and I dont think I had this happen until 2 weeks ago and I've had the latop since the last week of August. I've also had the problem crop up when I had the laptop go to sleep while watching a video online and when I tried to wake the laptop back from sleep, I get the blank screen with the cursor. My system is a Macbook air 11" 2013 1.3 Ghz with 4gb ram and 256 gb SSD. I also have a 15 MBPro and have not encountered this problem. Is this anyway related to the recent update that OSX was pushing for the upcoming Maverick update?

  • K9N SLI PLATINUM low data transfer rate

    Hi, (sorry for my pour english) I had to go back to Winxp native SATA/IDE drivers and my pc crash & BSOD problem it's gone! :D (BSOD when i install some programs or some games, listening music and moving data at the same time, etc.) now i'm available to execute multitasks without any troubles. But now the transference it's quite poor  , I think this is an easy and temporary solution for this big problem.
    I bought my PC on 2006 and the Windows XP drivers are from 2001, aren't new Nvidia/MSI drivers to fix this annoying problem?
    Thanks.
    AM2 3800+ X2
    MSI K9N SLI PLATINUM, bios 1.4
    2 x 1GB OCZ DDR2 6400 Platinum
    PSU PowerCooler 550w
    HD WD3200 SATAII
    NX7900GT

    I've got nearly the same problem, but a little worse. My data transfer rate seems very slow for a 100mb network and if I start copying files over the network, after only a couple of megs I lose connectivity to the network completely! I've removed the network cable and windows notices this, and when I put it back in windows also notices the change, but the green and orange lights on the port itself stay on solid. If I reboot windows everything comes back. I don't have problems browsing the web, seems to only happen when the ethernat port is running close to full load (for the connection speed of 100mb as apposed to 1gb).
    Anyone else seen this? I'm on the latest drivers, the latest bios and I've tried disabling on of the network ports in the bios but his didn't work.
    Kevpatts

  • K9N SLI V2 HD + Boot Issue

    X2 4400+ 2.3GHz
    8800GT 512mb SLI
    Seagate ST3320620AS 7200RPM 16MB Cache 320gb
    4x 1GB G-skill PC6400 DDR2 800
    MSI K9N SLI V2  nForce 570LT Socket AM2
    TX750w Corsair PSU
    Lite-on DVDRW LH-20A1S
    Windows Xp Professional SP3 32-bit
    [/B]
    So first I can run the PC works perfectly I just upgraded from a 120gb IDE that was on for close to 32,000 hours and was physically dying to a 320gb SATA (I removed the jumper from 1.5 to 3.0)
    First when I boot the PC up after the MSI splash I get this message.
    "not enough space in in runtime area SMBIOS data will not be available." now it happens so fast that I didn't see it for a few days I only noticed it by chance.
    I searched BIOS and didn't see a option to clean it...google wasn't much help.
    Also I am getting stuttering in music/videos mostly happens in videos but this is kinda bad the drive passed all of Seagates tool tests but its delaying loading of games. Crysis on my old 2mb IDE took 60 seconds to load it now takes 120 seconds on warhead.
    Now the stutters don't always happen but on big files (bigger then 200mb) it seems to happen a lot when I jump forward and it will randomly do it as well.
    Is there a configuration issue here? Also I am using Bios 1.0 I never updated it since its not broken and I hear horror stories on BIOS update failures.
    What to do?
    Also how do I fill my SMBIOS up?

    Quote from: Bas on 27-September-08, 01:48:46
    And Athlon X2 doesn't support 4 sticks at DDR800, only at DDR667.
    Use 2 sticks if you want to use DDR800 at max speed.
    well its been running all 4 sticks for about 6 months now so I guess it underclocked it to 667. I am not a tech as you can clearly tell by now bass ^-^
    Also the freeze might have been a one time thing...I got it after rebooting to check bios version and I loaded this page before the PC was fully booted up and the screen froze it never did this before now...this was the first time it happened. Forgive me for confusing you I get the "stuttering" during the first boot up to desktop it dadadad the music and during videos/audio it randomly stutters the sound but only from time to time.
    Also I just reset the cmos (msi manuals could be better in detail) and I don't see any message after the MSI splash it goes directly to the XP logo.
    I ran a software called Bootvis with SP3 because of slow boot times and it speed things up a bit more...but I heard there was some issues with AMD and SP3....going to try loading Vista Ultimate x64 again to see if its the OS or the HD.
    Is there a special setting for IDE vs SATA? All options are on "auto" in bios could it not be doing it?
    I have had no problems until I installed this new HD. I noticed the SMBIOS text after the hard drive and every other component has been in my PC for at 3 months or more.
    I will run the memtest a bit later but I just did a test a month ago and all 4 sticks worked fine each working in dual channel as well.
    I just ran HD Tune and it says my transfer rate is 11mb-12mb which seems horribly slow I never ran this on my old IDE but I am about too.

Maybe you are looking for