K9N2 SLI Platinum Blue Screen of Death when installing Windows XP

My hardware includes:
•   MSI K9N2 SLI Platinum Motherboard
•   Corsair XMS2 TWIN2X4096-6400C5
•   GeForce 9800 GT 512MB GDDR3
•   AMD Phenom X4 9850 Quad Core Processor, Black Edition 2.5GHz
4MB Cache 2000MHz [4000 MT/s] FSB
•   Thermaltake Ruby Orb Aluminum Core CPU Cooler
•   UltraX3 850 Watt ATX Modular Power Supply
•   [1] Western Digital 200MB7200 ATA133 [Not connected yet]
•   [1] Maxtor 80MB ATA133 Drive [Not connected yet]
•   [1] Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE
•   [2] Seagate 7200.11 ST3500320AS 500GB SATA Hard Drives With 32 MB Cache
[Not connected yet]
•   LG DVD-RW
•   Toshiba DVD-ROM [Not connected yet]
•   AMI Bios v02.61
•   Antec Full Tower case
After partitioning my drive with Fdisk I tried to install Win Xp. My plan was to format the drive with XP. XP starts up and runs through the initial system check then when it prepares to install I get the blue screen that says [my words] "Windows has shut down to prevent damage to your system. If drivers are mentioned try disabling them in the BIOS or get the latest bios update from the equipment manufacturer..." The error is:
Stop 0x0000007E on the next line
pci.sys - address f7480BFbase at f7487000 Datestamp 3b7d855c
Just never had these problems setting up a system and soon I will be able to say it took me 2 years to get this running. Hope someone can help. Thanks

Use XP Installation disk with SP2 or SP3 included to fix the BSOD.
Simple your XP installation disk is outdated and cause troubles with latest hardware.

Similar Messages

Blue screen of death when installing Adobe Air

I'm trying to install Adobe Flash CS6 and Adobe Air along with it. About 10 seconds after pressing "install", my computer shows the blue screen of death for a split second, and then restarts.
To my knowledge, I do not have Folder Lock. I also cannot find any windrvNT.sys in the C:\WINDOWS\system32 folder, even after turning on the "show hidden files and folders" option.
Using Windows XP

Raymon_Zheng111 does your computer meet or exceed the system requirements for Flash CS6 listed at http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-flash-professional.h tml#Flash%20Professional%20CS6%20system%20requirements.

Blue Screen of Death when installing latest patches for Windows 7

I get a BSOD when I installed the latest windows patches. the actual error message skips between a General protection Fault and the following:
DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS.
It is involving the file applemtp.sys at stop 0X000000CE
I am unable to recover from it including a "safe mode" and a revert to previously known configuration.
Any ideas would be greatly appreciated.

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Blue Screen of Death When Plugging in Ipod Touch 4g

Hello,
Im reciving blue screen of death when I plug in my ipod touch 4g. I have updated itunes, Drivers, This happens every time and I suspect it happens when my computer says found new hardware reconizing the ipod as a camera because once I pluged my ipod in and it didn't pop up found camera hardware and it worked. So does anyone know how to fix this or disable my comp from reconizing the ipod as a camera? Thanks in advance
p.s im using XP service pack 3

have u tried pluging an other usb (eg mp3 or mem stick) it to ur compuer? is it doing it with these?
if its only doing this with ur ipod try the following
1 go to start menu and in the search box type in usb
look for device manager
2. open the disk drives and plug in ipod touch and removeable disk should show up
3, try usb drives updates
because the ipod has a camera most older computers running xp think its a camera,
if u have and usb mem stick copy ur itunes folder on to it and copy it to a computer running vista or windows 7 and c it its doing it on one of them, if its doing it on one them there may be other hardware isues with ur ipod touch

Blue Screen of Death when calling skype on iphone/...

Every time i call a person on skype on iphone or s6 (i think any smartphone) my computer crashes and causes blue screen of death. i have windows 8.1 running and this also happened on win 8. i have tried uninstalling, clean installing, deleting all old files of skype and then installing but nothing has worked.
on aside, when i get a call from another desktop skype as well, invariably, i cant connect the call at first attempt. clicking on accept does nothing and it will continue rining. even clicking on reject does not work after. the only option is to kill skype from task manager and then restart it. it then works fine for first call i make. it then has similar issue on later calls. not neccessarily the 2nd call. its regular but also random in nature.
i have not idea what is the problem. do you?
skype version 7.5.0.102
here is the summary of BSoD last night
Fault bucket AV_rtsuvc!Unknown_Function, type 0
Event Name: BlueScreen
Response: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_rtsuvc!Unknown_Function&State=1&ID...
Cab Id: 820ea6ec-6de2-4d12-bd98-0fdae73a883d
Problem signature:
P1: 50
P2: ffffe000ef655ff8
P3: 0
P4: fffff800e54fc0c0
P5: 0
P6: 6_3_9600
P7: 0_0
P8: 768_1
P9:
P10:
Attached files:
C:\Windows\Minidump\061315-85671-01.dmp
C:\Users\Madhvendra\AppData\Local\Temp\WER-220125-0.sysdata.xml
C:\Windows\MEMORY.DMP
C:\Users\Madhvendra\AppData\Local\Temp\WER2DD3.tmp.WERInternalMetadata.xml
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_50_a9ac997f524f3a2a4a3ec8b634fedacf174d_00000000_cab_15346984
Analysis symbol:
Rechecking for solution: 0
Report Id: 061315-85671-01
Report Status: 0
Attachments:
BSoD 14 June 15.zip ‏10 KB

Your Realtek camera drivers are crashing. Make sure you have the latest drivers installed for your video card and camera. If the problem continues to occur update the camera drivers to the generic Microsoft camera drivers that come with the OS. Steps on how to update to those drivers are covered in the below graphic:

Blue screen of death when syncing verizon I phone

I receive a blue screen of death when I try to sync my I phone 4 with I tunes on my laptop. The initial sync went fine, I am connected to my Exchange server for email and have downloaded CD's to I Tunes, when I try to sync...blue screen. I have run registry fix and virus programs and have no errors. Does anyone know how to fix this?

The first response was correct, the computer (xps 1210) used a logitech camera driver that I did not recognize so I deleted it. The software was still active and crashed the computer. Fix was reinstall logitech software and driver. Updating the driver would have probably worked. Thank you!

Blue Screen of Death when calling skype on iphone/s6

Every time i call a person on skype on iphone or s6 (i think any smartphone) my computer crashes and causes blue screen of death. i have windows 8.1 running and this also happened on win 8. i have tried uninstalling, clean installing, deleting all old files of skype and then installing but nothing has worked. on aside, when i get a call from another desktop skype as well, invariably, i cant connect the call at first attempt. clicking on accept does nothing and it will continue rining. even clicking on reject does not work after. the only option is to kill skype from task manager and then restart it. it then works fine for first call i make. it then has similar issue on later calls. not neccessarily the 2nd call. its regular but also random in nature. i have not idea what is the problem. do you? skype version 7.5.0.102here is the summary of BSoD last night Fault bucket AV_rtsuvc!Unknown_Function, type 0
Event Name: BlueScreen
Response: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_rtsuvc!Unknown_Function&State=1&ID=820ea6ec-6de2-4d12-bd98-0fdae73a883d
Cab Id: 820ea6ec-6de2-4d12-bd98-0fdae73a883dProblem signature:
P1: 50
P2: ffffe000ef655ff8
P3: 0
P4: fffff800e54fc0c0
P5: 0
P6: 6_3_9600
P7: 0_0
P8: 768_1
P9:
P10:Attached files:
C:\Windows\Minidump\061315-85671-01.dmp
C:\Users\Madhvendra\AppData\Local\Temp\WER-220125-0.sysdata.xml
C:\Windows\MEMORY.DMP
C:\Users\Madhvendra\AppData\Local\Temp\WER2DD3.tmp.WERInternalMetadata.xmlThese files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_50_a9ac997f524f3a2a4a3ec8b634fedacf174d_00000000_cab_15346984Analysis symbol:
Rechecking for solution: 0
Report Id: 061315-85671-01
Report Status: 0

Your Realtek camera drivers are crashing. Make sure you have the latest drivers installed for your video card and camera. If the problem continues to occur update the camera drivers to the generic Microsoft camera drivers that come with the OS. Steps on how to update to those drivers are covered in the below graphic:

Blue screen of death when La Cie external firewire drive connected

I tested a LaCie external firewire drive on my iMac and it worked fine. I packed it up well and posted it to a friend who gets the blue screen of death when the LaCie is connected to her iMac. She's not even trying to boot from it.
My iMac is 9.1 and hers is 8.1. We are both running Snow Leopard. Was there some problem once upon a time with chipsets or am I mis-remembering?
TIA

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

K9n2 sli platinum will only boot/post when running single channel

Hey
I am having problems with the rig when i want memory to run Dual channel.
I have tried all bios settings (or at least i think so) and all memory slot combination (or at least i think so) without any luck.
When i put 2 sticks in dimm 1+2 I get nothing but a black screen.
When I then turn my pc off, putting 1 stick in dimm 1 it will boot and I get the message: DQS training failed on previous boot.
Mainboard: MSI K9N2 Sli platinum
CPU: AMD 5600X2 Windsor 2x1mb cache
HD: have tried with WD 250gb and hitachi 160gb sata2
Psu: Have tried with OCZ 500W and corsair 620W
Memory: Have tried with kingston pc5400 and Adata pc6400 both 1gb sticks
GFX: Have tried with GF8800GTS, ATI 1800XT and GF8500GT
CPU cooler: CM Gemini2
Motherboard have BIOS 3.1 ( so there should be no problem with running the cpu)
everything except for mainboard have been testet with other gear and is working 100%
Memory passed memtest with no errors.
Some facts
1 stick in dimm 1 = boot/post single channel
1 stick in dimm 2 = black screen.
1 stick in dimm 3 = boot/post single channel
1 stick in dimm 4 = black screen
1 stick in dimm 1 + 2 = black screen.
1 stick in dimm 1 + 3 = boot/post single channel
1 stck in dimm 2 + 4 black screen
1 stckk in dimm 3 + 4 black screen.
1 stick in 1 + 4 = Boot/postor black screen..cant remember but for sure not dual.
1 stick in 2 + 3 = boot/post or black screen..cant remember but for sure not dual
I have tried:
manual timming settings, both recommended and lower timmings.
Auto timmings
More volt to memory
More volt to cpu
Tried 800, 667, 553 and 400mhz
Tried sli memory disabled and enabled
Changing cpu ratio
Tried T2 and T1
Have tried load default settings
load optimized settings
everything on auto
well, that’s just about it and don’t know what to try next.
So if anybody have some input I would really appreciate it.
Regards
Jesper

Have you done that?:
Quote from: Stu on 13-September-09, 02:54:40
Have you tried taking the board out of the case and setting up outside on a flat anti-static surface? Maybe there is something shorting the back of the board where the DIMM slot is.
If no change:
Leave just one memory stick in 1st DIMM close to CPU socket,
ensure that system is stable the flash to the latest BIOS ==>
http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1443
You can >>Use the MSI HQ Forum USB flasher<<
Once done re-test.

Blue Screen of Death When opening iTunes.

I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open ONCE and then start crashing again. I don't even do anything to help it open it just miraculously works every now and then. It even craches the comp when starting iTunes in safe mode. The blue screen error says "Page Fault in non-paged area". iTunes worked fine for months before this randomly started happening. I have tried every solution I have seen, even ones that weren't for my problem. So far I have:
Manually uninstalled iTunes and QT and reinstalled the standalone QT then iTunes.
Disabled itunes helper and ipod service before starting.
Disabling all other services and start-up items.
Installed current bios and drivers (as far as I can tell)
Installed current windows installer.
Updated microsoft products including .net
Updated Java runtime environment
Replaced ram
I have a pentium 4 1.6ghz with soyo mobo and a RAID card(mirrior) set-up. 1 gig of pc133 ram. I can ul the minidump if needed.
I figured out how to load my podcasts on my ipod manually but I want to get a video ipod so I need itunes. PLEASE HELP!!
Windows XP

there's a few more things worth checking on. but let's also capture a minidump of the crash and send it to someone who can interpret minidumps.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
send it to this email address
in the email, put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Blue screen of death when connecting ipod or running itunes

Please help me, I get the blue screen of death and its down to my itunes/ipod i think.
Uninstalled Itunes (tried doing this in safe mode but it wouldnt let me saying you cant do this) and re-installed it but when try to use it (ipod not connected) my screen either freezes a few moments later or the BSOD appears.
Ive ran a windows disk check and a system mechanic 7 one as well, a few folk on here have said my ipod might need reset but this is happening without the Ipod connected so is still an issue?
My ipod seems to be working fine, obviously i cant even access itunes to reset it or see its status.
Any help would be greatly appreciated.

Have you tried this?
http://support.apple.com/kb/TS2280
CG

Why is Encore 6.0 giving me the "blue screen of death" when I try to create a menu?

When I purchased my student edition 6.0 (which I love by the way), Encore did not have any of the libraries loaded up on it. After reading some discussions, I downloaded the missing folders.
Now, when I try to create a menu, my computer shuts down and gives me "the blue screen of death" as they call it (a blue screen with white writting, counting up to 100%, and saying Windows is preparing to crash...or something about the hard drive crashing....I can't remember because it goes off the screen so quickly).
I've done this several times - my computer only does this when I try to create a menu in encore, and not in any other part of encore. It hasn't happened in any of the other programs either (Premiere Pro and Audition are the only other programs I have used so far), or any other times I have my laptop.
Because of this, I am not too concerned since it seems Encore is the problem. However, I do not want any other problems to escalade from this either.
Am I doing something wrong? Can someone please help me? I'm working on my Senior Thesis (a video) this year, and I really really cannot afford to have my computer crash on me.
Please and thank you,
Meghin

Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169
-and an Encore fix http://forums.adobe.com/thread/1060443

Blue Screen Of Death When Syncing Ipod

Hey so if anyone can help me i will love you so much,
So I have a 20GB fourth generation ipod (old i know) but it works fine, and i have an new HP laptop that i got for christmas and like for a good 2 months everything was fine with itunes and then one time it told me i needed to restore my ipod to factory settings and i was like oh this is annoying but whatever ive done it before so i just did it, but the next time i tried syncing my ipod the BLUE SCREEN OF DEATH came up and that scared me but i thought maybe it was just a one time thing...turns out it wasnt and now every time i try to sync my ipod the blue screen comes up and i have to restart my computer. my itunes otherwise works fine i listen to music on it and add music to itunes perfectly fine just the syncing doesnt work. I also thought maybe it could be my ipod because it is old so i went down to my desktop which has XP and and older version of itunes but it worked completly fine. SOOOOOOOOOOO i have no idea what to do. i dont know tons about computers but im not ******** and can most likely follow directions so if anyone could help me it would be much apreciated because i can not take listening to the god awful radio in the car much longer.

Have you tried System Restore to go back to before the problem started?
If that fixes the Blue Screen Of Death issue, then you can try and track down the changes from then to when the problem started.
Good Luck.

Windows "Blue screen of Death" when booting computer attached to LabVIEW PXI realtime system

Good Morning (at least in the western hemisphere)!
I'm having a problem on two test systems where intermittently, at least on one machine, I get a Windows "Blue Screen of Death" error message when booting the machine connected to a PXI RT system. I reloaded the RT systems software yesterday (LV RT 7.1.1, NI-VISA 3.3.1) and am having this problem on two different setups, two laptops, two PXI chassis. Our short term work around has been to boot with the network cable removed at one end or the other, but these are the baseline models for a larger test system in the design/construction stage that will not be used by knowledgeable engineers but by (probably more knowledgeable!) technicians. Any ideas would be a help
Thanks again,
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Blue screens are almost always caused by drivers and not by applications, so chances are there's a problem on the driver level. The crash log file will be instrumental to diagnosing this problem.
Turn on the crash event logging as described in this Microsoft KB:
http://support.microsoft.com/kb/314084/EN-US/
...and then post the details from the crash found in the Windows Event Viewer here. That will help us narrow the problem down.
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Blue Screen of Death when I open Firefox

Blue Screen Of Death whenever I start Firefox.
== Crash ID(s) ==
No crash ID is produced only the Blue Screen Of Death.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Embedded Web Browser from: http://bsalsa.com/; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

All of a sudden today 11-25-2010 I get the BSOD when i start Firefox Nothing(extinsions/addons) new installed or updated. no virus/spyware/malware

K9N2 SLI Platinum Blue Screen of Death when installing Windows XP

Similar Messages

Maybe you are looking for