K9N2 SLI Platinum - Can't install OS, won't boot from CD

Finally got computer in from NewEgg after UPS made me wait the entire weekend. =(
Got everything together and it's recognizing hard drive and dvd drive (both SATA).
Changed the boot options to CD drive, popped the vista cd in and nothing. After 00 USB mass storage devices found and configured, it just hangs there and does nothing.
I've also tried putting in an older dvd drive via IDE and an external USB dvd drive and the same thing occurs; it never goes past # of USB storage devices found and configured.
Is it a bad mobo or is there something that I might be forgetting?
Thanks
MSI K9N2 Platinum
Corsair DDR2 800 2GBx4
AMD Phenom 9850
EVGA 9800 GTX+

Quote from: BOSSKILLER
What PSU you use?
Sorry, I have an Antec TPQ-850 850W
Quote from: BOSSKILLER on 18-November-08, 21:09:44
Try again with barabone setup. {Disconnect any storages}
I'll try that once I get home from work...
Quote
The CPU used {AMD Phenom 9850} is supported since 3.2 ==> http://global.msi.eu/index.php?func=prodcpu2&prod_no=1443&maincat_no=1#menu
So is the Phenom 9850 not supported by my current BIOS version? The BIOS is recognizing the chip correctly.
Could this cause the problem I am having?
Am I going to have to update my BIOS to get full use out of the chip?
Thanks

Similar Messages

I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly apprec

I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly appreciate it! Thanks!

Downgrade OS X Lion To Snow Leopard [Video How-To]
http://www.cultofmac.com/110614/downgrade-os-x-lion-to-snow-leopard-video-how-to /
How To Downgrade OS X Lion To Snow Leopard: The Complete Tutorial
http://www.redmondpie.com/how-to-downgrade-os-x-lion-to-snow-leopard-the-complet e-tutorial/
How To Downgrade from Apple OS X Lion to Snow Leopard
http://www.pcmag.com/article2/0,2817,2389334,00.asp

Can't repair disk/Won't boot from install disk

Apologies in advance for how not-tech savvy I am.
I was trying to create a partition using bootcamp but the partition failed and it told me to repair disk using disk utility.
When I try to boot from the install dvd by holding down C the computer just gets stuck in a loop. It turns on, chimes, makes a whurring noise and then restarts again. I can select the install disk by holding down the option key but it does the same thing. If I try to safe boot it comes up with a flashing folder and a question mark.
(Also, the install disk I'm using is not the one that came with this computer, but a OS X 10.5.4 that came with our iMac. Don't know if that would make a difference?)
I downloaded the techtool deluxe that comes with applecare, and it says there's a problem with the volume structure, but when I try to repair using techtool it says the disk cannot be repaired and only gives me the option to start over.
Message was edited by: lizrd91

You would have to be booting from either a newer version retail OS X 10 install DVD
than whatever your computer shipped with, or that original specific disc set it first had.
No other computer's model/build specific restore-install disc set can do this job, since
it would not be correct and can't boot the computer. The wrong software set is on it.
There may be some way to attempt to boot into Single User mode and try fsck...
• Resolve startup issues and perform disk maintenance with Disk Utility and fsck:
http://support.apple.com/kb/TS1417
• OSXFAQ - Technical stuff for OS X: how to use 'fsck'
http://www.osxfaq.com/dailytips/07-2002/07-31.ws
There are odd instances where users have applied incorrect use of Boot Camp
to install a Windows version in their Mac, and in so doing, erased or damaged
the OS X partition on their computer's hard disk drive. This is why it is a great
idea to perform maintenance and also keep a complete bootable OS X clone
on an externally enclosed hard disk drive, of the Mac's system & apps.
If you had a current version of DiskWarrior on its own disc media, that may be
able to help fix or restore some file system issues in a hard disk drive.
Perhaps there is more you can do, but frankly if I wanted Windows, there are
tons of old PCs out there awaiting recycle from which to choose. (Not 4 me!)
Good luck & happy computing!
+{PS: Hi there in the down-under ... from here, in the up-over!}+

Tiger/Panther install problems - won't boot from Tiger DVD or Panther CD

My Mum has an iMac G3 CRT, running at 500MHz, with 1GB RAM, a 20GB HD, & a slot-loading internal CD-RW.
The iMac in question is the model described here: http://www.everymac.com/systems/apple/imac/stats/imac500indigo.html
She only uses the machine for email & web browsing, but because it runs OS 9, it won't run a modern web browser (it's stuck on Internet Explorer 5.1.7) so lots of websites don't load properly or work at all. This is fair enough as IE for the Mac hasn't been updated since 2001.
My idea was to upgrade the machine from OS 9.2.2 to (ideally) 10.4.11, or failing that, 10.3.9, which would then let her use the current version of Safari, or possibly even Firefox. (Any thoughts on which would be easier for a currently IE-using technically-challenged pensioner would be welcome, although I prefer Safari myself, despite its shortcomings).
The iMac only had it's original 128MB of RAM until recently, but I persuaded her that it would be a good idea to spend 70-odd Pounds on 1GB of RAM so that OS X could not only be installed (which would let a modern browser be used) but would run at a useable speed. The minimum requirement for Panther is 128MB of RAM, but I suspected that it would run like treacle on a 128MB G3, and I was hoping to go for Tiger anyway, which requires 256MB.
As Tiger comes on a DVD (I have the retail/generic version) and the iMac has no DVD drive, I borrowed a friends external LaCie FireWire DVD-RW drive (the Porsche styled one). The DVD mounted first time, and the Startup Disk control panel let me select it.
When I restarted, I got the initial OS X pale grey screen with the dark grey Apple logo in the centre, with the spinning circle thing below, but after a minute or so, I could hear the DVD stop spinning in the drive, and a few seconds later the dark grey Apple logo changed into a dark grey "circle with a line through it" logo, with the normal circle thing still spinning below. This is how things stayed for many minutes, so I just restarted with the external drive off, and eventually got back to a normal 9.2.2 boot-up.
Next I tried running the "Mac OS X Install" application on the Tiger DVD from within 9.2.2. This started and came up with a big Tiger logo screen with a button labelled "Restart". Clicking it brought up an OS 9 error dialogue though, which said something along the lines of "the Tiger DVD cannot be selected as the startup disk" with a number 2 in brackets at the end of the error message - like this: (2)
This error occurs both if I select the Tiger DVD in the Startup Disk control panel prior to running the "Mac OS X Install" application, or if I select the internal hard disk. I know the DVD isn't faulty, as I used it to successfully boot my own Mac (a Power Mac G4 Mirror Drive Doors) just the other day, in order to repair permissions on the startup disk.
At this point I gave up on Tiger and tried to use the first of 3 Panther CDs that I have. These 3 CDs are burnt copies that came with my own Mac and contain version 10.3.2.
The CD refused to be selectable in the Startup Disk control panel. It's icon was greyed out, and so I couldn't boot from it. I tried running the "Install Mac OS X" application on the CD from within OS 9, but got the same error with the 2 in brackets when I clicked the "Restart" button, just like with the Tiger DVD.
Initially, I suspected that these Panther discs might be machine-specific, rather than the retail/generic version, because of the first CD being greyed-out in the Startup Disk control panel, but then the error dialogue that matched the one I got when I tried the Tiger DVD makes me think that my Panther CDs might be generic after all. Examining the first CD on my own Mac, it appears to be generic, but I'm not 100% sure, as the CDs are copies and as such don't have the usual identifying information on the labels. There are no machine-specific files that I can find on the first CD, which is dated January 9th 2004.
Various websites mention that when Tiger was current, Apple would swap a retail copy of the DVD for a set of CDs. I've looked on eBay but not been able to find any. This doesn't surprise me though, as there will be very few copies of Tiger on CD out there, and even fewer copies that people would want to sell.
There are a few retail copies of Panther available on CD, but if my current burnt copies of these discs are in fact generic, then buying a new set would make no difference. Besides, I'd prefer to use Tiger.
The Tiger minimum requirements (see http://support.apple.com/kb/HT1514) say:
"To use Mac OS X 10.4 Tiger, your Macintosh needs: DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation"
What it doesn't say though, is whether the DVD drive has to be an internal one with Apple firmware/modifications, or whether an external 3rd party one will do. However, I know from various websites that it's possible to load Tiger onto this sort of Mac, and sometimes even older non-FireWire Macs, despite what the minimum system requirements say.
If anyone has any suggestions I'd be much obliged!
Thanks.

The problem is now solved, but I'm not sure how I managed it, unfortunately.
Having read the article at http://docs.info.apple.com/article.html?artnum=75430, I checked both my Tiger DVD and my first Panther CD, and neither had the firmware updater on them, despite what the article said, so I downloaded it. However I was sure I'd applied a firmware update to the iMac a long time ago, and the 4.1.9 version number seemed familiar.
When I checked, I had in fact already applied the firmware update a few years ago!
I tried running the "Mac OS X Install" application on the Tiger DVD from within 9.2.2 again, and got the same error message as before. I was wrong about the error code though. It was minus 2 in brackets, not 2 in brackets.
The full text of the error message is:
An error occurred.
"Startup Disk was unable to select the
install CD as the startup disk. (-2)"
I tried selecting the DVD manually in the Startup Disk control panel (as before) and running the application again gave the same error message (also as before).
I then went into Extensions Manager to see if there was anything there that might be interfering with things. The only thing that caught my eye was the LaCie SilverLining control panel (which I think was version 6.4.5a). This was something that originally came on a floppy disk accompanying an external hard drive that I used to use years ago at a place I worked, and I used to find it invaluable back in the OS 9 G1 Power Mac magneto-optical external drive days!
I couldn't remember what it was doing on the iMac, but I switched it off, and then clicked "Restart", hoping that when I rebooted (in OS 9) the error message wouldn't come up when I ran the "Mac OS X Install" application.
However, I'd forgotten that I'd switched the Startup Disk control panel to the DVD, so when the iMac restarted, the initial OS X dark grey Apple logo screen appeared, and I expected the dark grey "circle with a line through it" logo to appear shortly afterwards, but it didn't! The iMac booted up from the DVD, which then let me install Tiger! I was then able to apply the 10.4.11 update, plus all the others that Software Update provided. About half a dozen restarts and several hours later, the iMac is now fully updated & configured, favourites are copied over to Safari 3.1.2, and all I have to do is teach my Mum how to use the OS X Finder, Mail & Safari, as opposed to the OS 9 Finder, Outlook Express & Internet Explorer...
Switching off the SilverLining control panel seemed to do the trick, but since the iMac then rebooted from the DVD, not the internal hard disk, I don't see how it could have possibly had any bearing on things! Very weird!
Anyway, thanks to Allan Jones & spudnuty for their advice. All's well that ends well!

Panther is installed but won't boot from iBook hard drive

Hello,
I made a similar post in the iBooks colors section of Discussions on this topic not quite knowing whether this was a hardware or software issue. I finally got Panther to install after using Disk Doctor to check for and fix errors on 9.2.2 (I would never use with OSX) and also rebuilt the directory while booted from an OS 9 CD and running Disk Warrior from a floppy and taking out the airport card. The Panther CD told me to restart the computer after installation. During the OSX start up from the hard drive I saw a gray screen and the dark gray Apple logo with the spinning gear then the computer crashed and a message appeared that I needed to restart the computer. After restart, the same sequence of events happened again. I have tried to restart from the OSX using the full retail CD used for intallation and the computer also crashes. I cannot start up from the Disk Warrior CD either. I have also tried make a Safe Mode start up and the iBook again crashed with the restart message appearing again. When I restart in OS 9 everything works perfectly, OS, airport and applications. I did have Jaguar installed on this iBook until five months ago, but incounterred issues with it and decided that more RAM would solve my problem. I then decided to initialize the hard drive and reinstall OSX after purchasing 256 RAM. The 256 stick of RAM was bought from ifixit.com and a guy there told me he thought that the logic board needed to be replaced. I explained to him that the computer works perfectly fine in the OS 9 mode, but he said that 0SX is more demanding and 9 can get by on less than perfect logic board. I also reinstalled the 128 MB RAM that was in the computer when Jaguar was running on it, but that didn't help either. I have scoured the iBook and Panther OSX sections of Discussions for any others having a similar problem, but not such luck.
I would appreciate any information or suggestion that you might have as to what may be causing this issue on my iBook.
Thank you.
Greg
iBook Mac OS X (10.3.5) 300 mhz 320 MB RAM

Greg:
You have probably already tried this, but the first thing I would do is reset the PRAM.
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Also, check out this Apple article Your Mac won't start up in OS X.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6

Can I install Snow Leopard and boot from software RAID 1 (mirror)?

I have a Mac Pro (quad core 2.66 GHz) on order for my office workstation. Yeah, I know new ones are probably coming out early next year but due to budget and upcoming projects I need one now. What I'd like to do is replace the pre-installed 640GB drive with two 1 TB drives and mirror them. The 640GB drive will be redeployed to another machine in the office. Can I boot from the Snow Leopard install DVD, go to Disk Utility, setup a RAID 1 with the two drives, install Snow Leopard to the mirror and then boot off the mirror set?
I've searched and found offhand comments to the effect that installing to and booting from a software mirror is OK, but I'd like to know for sure that it's OK. Any experience that you have with such a configuration would be nice to hear.

Yes. But before you do read the following:
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server: Hardware and Service Comparison>.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons
Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

Can one install packages (pkgadd) while booted from cd?

Our system ( Sunfire 280R Solaris 8) crashed during a reboot for a cluster installation.
Currently the system will only boot from CD. Can the pkgadd command be run with the system booted from CD?

Our system ( Sunfire 280R Solaris 8) crashed during a
reboot for a cluster installation.
Currently the system will only boot from CD. Can the
pkgadd command be run with the system booted from CD?Yes, it can. You can use the -R flag to specify an alternate root device (the hard disk).
Of course repairing the boot failures may involve more than simply running pkgadd.
Darren

K9A2 Platinum-Won't boot from optical drives

My problem is that I can't get my computer to boot from either optical drive.Both drives work; I can read and write from either drive in windows xp. In the boot order menu neither drive is shown as a boot from device.The boot sequence menu shows all hdd and usb devices but no optical drives.Both drives are recognized in the bios.I wanted to dual boot vista x64 but can't because it won't boot from drive.Any ideas?
QuadCore AMD Phenom Black Edition 9850, 2500 MHz (12.5 x 200) MSI K9A2 Platinum (MS-7376) OCZ Reaper HPC OCZ2RPR10662G 2 GB DDR2-800 DDR2 SDRAM ATI Radeon X1800 GTO (256 MB) WDC WD2500KS-00MJB0 (232 GB, IDE)WDC WD5000AAKS-00A7B0 (465 GB, IDE) Microsoft Windows xp SP 3 Cooler Master 650W+3.3V@28A,+5V@30A,+12V1@18A,+12V2@18A,[email protected], [email protected]

Create a signature with PC components and PSU specs.
Example of PSU specs: Corsair VX450W, +3.3V~20A, +5V~20A, +12V~33A
To create signature:
Click on PROFILE above (near top of this page) and then in your "Profile", what I show in red below under "Modify Profile", scroll down to "Signature" and enter your specs in the box and then click on "Change profile" button on the bottom.
Profile Info
Summary
Show Stats
Show Posts
Modify Profile
Account Related Settings
Forum Profile Information
Look and Layout Preferences
Notifications and Email
Personal Message Options

K9N2 Sli Platinum - won't boot? Can't figure out problem.

Hey guys. My computer practically crapped itself the other day, and there were so many symptoms I'm not quite sure
what to even search for.
I've had this computer for about a year now. no problems since the day i built it.
specs:
Msi K9n2 Sli Platinum mobo
AMD Athlon 64x2 3.2 Ghz
2x BFG Nvidia Geforce 9800 GTX+
2x Cosair xms2 2gb ddr2
1000 watt BFG EX Series
Sony DvD drive
1tb western digital drive
So i was playing SC2 and my computer froze. So i restarted and it hung during windows loading.
I turned it off waited a few seconds and started... still hung. Cycled it and tried a couple more times.
Still nothing. Naturally i assumed it was a virus so i repaired my windows installation. After it finished it hung on
Windows has finished repairing your computer will now restart. I waited about an hour and decided to just restart
myself. Next time it booted asked me if i wanted to boot from cd and then it just shutdown like i pulled the plug.
Then i thought well i ruined my windows install. I tried booting again it did the same thing. So i just said screw it
ill reformat. But this time there was no signal from my graphics card. When i turn the computer on it will normally
be loud and then get quiet after everything has booted. But now it just turns on and stays loud because i suspect
it's still booting. So i took everything apart. Tried connecting and unconnecting everything. moving ram etc...
Ive got it to boot twice but after that it crashes before windows loads like a plug pull and it wont boot again.
I cant tell whats wrong it could be everything but nothing makes sense. I've built about 7 or 8 computers.
gotten rid of several viruses and bad hardware but I've never seen anything like this.
I tried checking the LED codes for the board. Leds 11 and 10 and 9 and 8 alternate red and green which means HDD and floppy drive are trying to boot.
but it does that even when my harddrive is not connected and it still wont show video. Ive even rotated the graphics cards and tried a 7900gs. nothing.
Edit: now led 6 and 7 are red.
please help me out. Thanks.

Yeah the case i have is the antec 1200. Never had a problem with heat before.
Ive tried it with just the ram and the cpu and it still gives me the lights so i
guess it must be the mobo or processor. I don't have another motherboard to test everything else on
all my other pcs are 5 to 7 years old.
I was thinking about keeping all my old parts and buying these as replacements:
MSI NF980-G65 AM3 NVIDIA nForce 980a SLI HDMI ATX AMD Motherboard
AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 140W Quad-Core Processor
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL

K9N2 SLI Platinum Blue Screen of Death when installing Windows XP

My hardware includes:
•   MSI K9N2 SLI Platinum Motherboard
•   Corsair XMS2 TWIN2X4096-6400C5
•   GeForce 9800 GT 512MB GDDR3
•   AMD Phenom X4 9850 Quad Core Processor, Black Edition 2.5GHz
4MB Cache 2000MHz [4000 MT/s] FSB
•   Thermaltake Ruby Orb Aluminum Core CPU Cooler
•   UltraX3 850 Watt ATX Modular Power Supply
•   [1] Western Digital 200MB7200 ATA133 [Not connected yet]
•   [1] Maxtor 80MB ATA133 Drive [Not connected yet]
•   [1] Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE
•   [2] Seagate 7200.11 ST3500320AS 500GB SATA Hard Drives With 32 MB Cache
[Not connected yet]
•   LG DVD-RW
•   Toshiba DVD-ROM [Not connected yet]
•   AMI Bios v02.61
•   Antec Full Tower case
After partitioning my drive with Fdisk I tried to install Win Xp. My plan was to format the drive with XP. XP starts up and runs through the initial system check then when it prepares to install I get the blue screen that says [my words] "Windows has shut down to prevent damage to your system. If drivers are mentioned try disabling them in the BIOS or get the latest bios update from the equipment manufacturer..." The error is:
Stop 0x0000007E on the next line
pci.sys - address f7480BFbase at f7487000 Datestamp 3b7d855c
Just never had these problems setting up a system and soon I will be able to say it took me 2 years to get this running. Hope someone can help. Thanks

Use XP Installation disk with SP2 or SP3 included to fix the BSOD.
Simple your XP installation disk is outdated and cause troubles with latest hardware.

K9N2 SLI Platinum video won't initialize with monitor connected

Hi,
I've gone through the RMA process with my vendor and I am on my third motherboard right now and I am still having an issue (so, basically, nightmare scenario here ). The first and second motherboard failures seemed slightly different but the failure seems to be the same for the second and third and it is making me think that another factor may be at play other than the motherboard. All of the failures have been with the integrated video (which is all I plan to use at the moment --I don't even own a PCI-E video card right now nor have any plans to get one in the near future).
In the first motherboard, everything seemed to work (as far as I could tell --4 green diagnostic LED's and all that) but no video signal was produced. Testing with an antediluvian Virge DX based PCI card (some of you kiddies may be too young to remember such things) did show normal booting with that video card (as far as I allowed it to go) and I suspect, from the pattern of hard drive activity, that with the integrated video the boot process was also normal (I just couldn't see it because of no video signal being produced). But that is past and has been RMA'd.
The replacement motherboard and the motherboard replacing the replacement motherboard, on the other hand, have seemed unable to initialize video whenever my monitor is connected but if the monitor is not connected, they work fine (but then video defaults to a 1028x768 mode and I cannot run my monitor at native resolution). Curiously enough, my second motherboard worked correctly twice before exhibiting the described behavior making me think, at the time, that I just got really unlucky and simply had had it fail shortly after testing it those two initial times.
Not being able to initialize video while the monitor is plugged in means that if I try to start it while the monitor is attached, the motherboard will not even POST and that the diagnostic LED's will be stuck at the video initialization stage (three reds, and one green at group 4).
Furthermore, if I start it with no monitor attached and plug the monitor in after I get 4 green LED's, it will start booting the OS (Windows XP) but the screen will go black when the Windows XP logo should be appearing. I can also leave it unplugged until it should be at the Windows XP logo stage (or plug it after the 4 green LED's and unplug it again before the video mode switch happens) and when I plug it back in I can see the Windows XP logo. However, as soon as it switches to the Windows XP desktop, I get a black screen.
And again, if I leave the monitor unplugged until the Desktop should be showing up and I plug it in at that point (or go through the process of plugging and unplugging the monitor while avoiding having video mode switches happen with the monitor plugged in) I do get a Windows desktop at the 1024x768 resolution. Once in the desktop, as far as I can tell, I can do anything there that I normally would be able to do (so I mostly have a working system, as far as I can tell). I have even installed drivers, verified that the sound works, etc.. I will still do a repair install at some point because I am not doing this the "right way" and I probably needed to do it anyway (though I think it's using the right kernel and everything --showing 3 CPU's, etc.) but I am not looking for answers with that as my issue shows up before the system even goes through POST. Again, note that I cannot even take advantage of my monitor's native resolution with the current kludge.
Curiously enough, if I try to switch to my native resolution of 1920x1200 it will do it but only by switching me to a virtual 1920x1200 desktop on a 1024x768 display (so there's no actual video mode switch involved and the desktop becomes bigger than what my monitor can show). It's as if part of the subsystem is reading the monitor and "knows" that it supports 1920x1200 but another part of the subsystem is just assuming some sort of 1024x768 default common lowest denominator for digital displays. I attribute this to the fact that video has been initialized with no monitor connected.
I originally had a 350W Enermax power supply (which worked as long as the monitor was not plugged in) supplying 32A on the +3.3V rail, 32A on the +5V rail and 26A on the +12V rail but I replaced it with the power supply shown on my profile (which was probably totally unnecessary as I'm only using the integrated video --but hey, I now have a blue light coming from my power supply so that makes it all worth it ). I suppose both power supplies could work badly with this motherboard model but it seems exceedingly unlikely that that would be the case (specially since everything works as long as there is no monitor plugged in during video mode switches).
I currently am running it, on cardboard, with a single stick of RAM (on the slot next to the CPU) and nothing else connected to it except the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). I did play with RAM timings at the request of tech support but I can't imagine how it could be a RAM problem when everything works as long as a monitor isn't plugged in during video mode switches.
I did update the BIOS from 3.4 to 3.5. 3.5 did not seem to be available at the time of my previous motherboard and I knew it was a real long shot for this to be a BIOS issue that would be fixed with the 3.5 update (specially since the update mentions only CPU support stuff and nothing about video) but I am desperate. Yes, I have done the whole resetting the CMOS thing.
I am even considering the possibility that there may be some weird incompatibility between the video on this board and my monitor (under the assumption that, quoting Holmes, once you have eliminated the impossible, whatever remains, however improbable, must be the truth). I don't even know how that would work. Note that my monitor worked in my previous system with the digital input (my previous system is no longer available to me for testing --but I did get a chance to test it, after having problems with my first K9N2 SLI Platinum motherboard which I returned, and it worked). Note that my monitor works with the system in question (I simply cannot have it connected while there's a video mode switch under way). Note that the lack of a picture seems to be related to the motherboard as evidenced by it being stuck at the video initialization stage if I attempt to start it with the monitor connected.
Any wild ideas? I do not want to return this motherboard a third time and I specially do not want to return this motherboard a third time if it's something that can be easily fixed.

Quote from: Svet on 25-May-09, 02:21:06
Have you tried with just memory stick in 1st DIMM near to CPU socket and mainboard out of PC case?
Yes, I currently am running it, on cardboard outside the case, with a single DIMM (on the slot next to the CPU) and nothing else connected to it except for the power supply (including JPW3 & JPW4), the CPU, a hard disk with a working Windows XP install, a mouse on the mouse port and a keyboard on the keyboard port (specification as on my profile minus one RAM module). And it works,... as long as the monitor is not ever connected while video mode switches occur (including power on). And this is exactly how the previous motherboard which I returned also behaved.
Addendum: As an additional note, I have tried the other DIMM on the same socket by the CPU with the same results (everything works as long as there's no monitor connected during a video mode switch). I also managed to make a bootable Memtest86+ (is that what people use to test memory these days?) USB stick and I am running it right now. It has shown no errors right so far but it has only been running a few minutes. I do not really expect any memory errors to be at fault since they would have to be magical memory errors which only cause problems when there is a monitor connected while a video mode switch is happening but I'm desperate to try anything to find out what the issue is.

K9N2 SLI Platinum Install,2 Problems, Resolved..

I upgraded to a K9N2 SLI Platinum With 9550 Quad Core.
I used a Copy of WinXp from a Thunderbird CPU System.
1. Boot failure at second test ( memory ) Green light flashing. I thought it was a memory failure.
Read install instructions," need spacers" on mounting screws ( ?, I thought board needed to be grounded to case).
Installed non conductive spacers ( top $ Bottom ). Fixed Boot problem....
Board Booted to system Install.
2. Next , repair WinXp with Install CD, (repair option after Install selected )
system Repair completed " Almost" bombed out at " lan,
Could not call MS on LAN, no LAN installed on repair process,
evidently MSI Lan not in MS Hardware table....
Installed PCI Lan, MS recognized LAN, talked to mother and completed repair of WINXP.
Cleaned up system with " CCleaner exe "
System working, Alls well, All old programs and Data retained....
SO< Suggest MSI provide a way to access lan on boot.... and ship Motherboard install screws/spacers...

You don't choose Repair actually. You let Windows find the previous installation. It will ask you there for a repair /rhyme!/. Here is a description:
Boot the computer using the XP CD. You may need to change the boot order in the system BIOS so the CD boots before the hard drive. Check your system documentation for steps to access the BIOS and change the boot order.
When you see the "Welcome To Setup" screen, you will see the options below
This portion of the Setup program prepares Microsoft
Windows XP to run on your computer:
To setup Windows XP now, press ENTER.
To repair a Windows XP installation using Recovery Console, press R.
To quit Setup without installing Windows XP, press F3.
Press Enter to start the Windows Setup. do not choose "To repair a Windows XP installation using the Recovery Console, press R", (you Do Not want to load Recovery Console). I repeat, do not choose "To repair a Windows XP installation using the Recovery Console, press R".
Accept the License Agreement and Windows will search for existing Windows installations.
Select the XP installation you want to repair from the list and press R to start the repair.
Setup will copy the necessary files to the hard drive and reboot. Do not press any key to boot from CD when the message appears. Setup will continue as if it were doing a clean install, but your applications and settings will remain intact.
You will not loose personal files, but you will loose Windows Update history.

K9N2 SLI Platinum Problem? please help.

I have a K9N2 SLi Platinum board and i set it up yesterday. I'm having problems with some stuff though.
Situation: I can start up the comp and all lights turn up bright and pretty, all fans work; good news. But the video card stuff won't display on the screen... I doubt this is a motherboard issue but that's not what i'm asking help with. What i'm truly asking is what does 4 RED LIGHTS on the motherbaord RIGHT ABOVE the 16x PCI-E 16 x2 slot mean???
-Thanks in advance!
LOOK AT POST AT BOTTOM!
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV VVVVVVVVVVVVVVVVV

thank youall for helping with that problem, now i feel stupid for not noticing that should b eplugged in!...
but if you guys would like to help me with 1 more problem that'd be great;
Trying to get it so i can Install Vista via CD-ROM.
When i started up the computer yesterday it would go to a screen that i could access the bios by pushing the delete button during that time... Now it doesn't come up thus i can't access BIOS. Small problem but whatever. Also when i start it now it goes to the black screen (console i believe everyone calls it) and it says:
"Reboot and Select Proper Boot Device or Instert Boot Media in selected Boot Device and press a key_"
Please tell me what to do! I believe the boot device is the HDD or the CD-ROM. But in BIOS the other day neither the HDD or CD-ROM Drive would show in the boot devices thing.
-Thanks in advance again!

MSI K9N2 Sli Platinum with 1090t Problem

If anyone can figure this out, they will help me alot.
I updated my bios from 3.8 to 3.9. and it didnt anything
Light indicator.
http://imageshack.us/f/691/bioch.jpg/
While mine is
Group4. Led 4
   Led 5 Blinking between eachother (red light)
Group3. Led 6 Red
   Led 7 off
Group2. Led 8 Off
   Led 9 Green
Group1. Led 10 Red
   Led 11 Off
My Conclusion is that the lights are messed.
I have both yellow and Green light at the bottom of my motherboard.
In the instructions it says
Green light means the computer is powered on
Yellow means computer is standby.
The yellow light is on 24/7 even if the computer is off
The green light is on when i turn the computer (which is right)
I installed DualCoreCenter From MSI and it causes bsod.
The computer was working fine until I ran Prime95. It shutdown. And than it shutdown twice a starting windows screen. It worked fine after a while, but it shutdown again now. I dont wonna turn it on again.
My problem is somewhat similar to this persons.
https://forum-en.msi.com/index.php?action=printpage;topic=126143.0
I previously had q9400 with asus p5qlpro. I didnt know how to reinstall the os. the only thing i had to was reinstall nvidia drivers for the 9600 gso.

Quote from: impossibledone on 11-August-11, 09:41:47
Recently installed a 1090T on N9N2 Diamond and did testing on K9N2 SLI Platinum. All good after I flashed to 2.8 (the correct BIOS for that CPU). I Had the same problem with CPU sticking to heatsink, It was not caused by heat, I suspect the socket is weak. I just carefully pried it off.
Did I miss something? How did everyone jump on the CPU cooler without knowing what sort of case it's installed in/# of fans/what size fans, etc...?
did you have the same problem with different bios?

K9N2 Sli Platinum + SSD OCZ Vertex 3 = Slow Speed Problem [PARTIALLY SOLVED]

Hey folks,
I have a problem with my new SSD. I only get sequential reads of 140MB/s and writes of 114MB/s.
I think it is a driver related issue. I once got faster SATA2-like speeds but cannot reproduce the system settings again... Everything back to SATA1-like speeds after reboot.
First my pc specs:
MSI K9N2 Sli Platinum, BIOS v3.9
- 6 SATAII ports by nForce 750a SLI
- 2 ESATA (External-SATA) ports (back panel) by JMB363
- Supports storage and data transfers at up to 3 Gb/s
AMD Phenom II 965 Black
Patriot PV224G8500ELKB Viper II Series DDR2 4GB (2 x 2GB, CL5 PC-8500/1066MHz)
SSD SATAIII OCZ Vertex 3, 120GB, FW v2.11
LG Internal BlueRay BH10LS30
Windows 7 Ultimate x64
I only get very slow speeds with the SSD. I tried so many things that I am getting very frustrated now, I am even thinking about getting a new board and ram just to get the SSD up to speed...
1)
I installed Win7 first with all the default settings in Windows Setup from DVD. Default "IDE ATA/ATAPI controllers" driver was "Standard AHCI1.0 Serial ATA Controller".
SSD was connected to SATA1-port, On-Chip Sata Controller AHCI enabled in BIOS, Extra RAID/IDE Controller disabled.
All fine, but whichever benchmark I used (AS SSD, HD Tune Pro, Atto Disk Benchmark, CrystalDiskMark; other tools used: DriveControllerInfo, AIDA64/Everest, CrystalDiskInfo ) I got e.g. 140MB/s Read and 114MB/s Write sequentially (CrystalDiskmark, similar with random data AND only zeros ).
Trim working (it seems) with AHCI driver. I also changed to nvstor64 driver (nforce driver setup 15.56), with is marginally faster but not what you would expect from a SATAIII drive on SATAII controller.
2)
I installed Win7 using "diskpart" (Shift-F10) during disk setup, setting a cluster size of 64k instead of default. No real change.
3)
After reinstall of Win7 x64 (again...), I changed from SATA1 port to SATA6 port, also enabled Extra Raid/IDE controller set to AHCI as well.
Nothing changed. With all settings to default in Windows (ahci default driver), I then manually updated the ahci to nvstore64 driver in Device Management, rebooted.
Then a minute later after reboot I got the following Sequential speeds with CrystalDiskMark:
273MB/s read and 137MB/s write (random data) + 274MB/s read and 220MB/s write (with zeros) !!!
While I ran this benchmark Windows came up with a message: "You must restart your computer to apply these changes - Restart Now/Restart Later".
After the previos reboot, when I changed manually from AHCI to NVSTORE, I had changed nothing in the current session, apart from running CrystalDiskMark.
I did reboot and I was back to the slow SSD speeds again = 140/114 MB/s...
4)
I have tried every possible combination of mainboard SATA ports, drivers changing with nvidia setup/manually, deleting and disabling controllers (incl BSOD and startup repair :D ), chaning bios settings around, but I just cannot get back the faster speeds
There is never any change in speed, whether I use ahci or nvstore64, whichever benchmark I use, whether random or zeros...
5)
Could the SSD be broken, something internally preventing it from faster speeds (with this one random exception)?
Could it be that my K9N2 SataPorts only allows for / reduced to SATA1 speeds?
Am I missing something with the driver setup?
Do I need additional drivers for the extra JMicron Controller when using SataPorts 5/6 ?
I have no other mainboard to test this with...
Please guys, I am going to jump out of the window if I can't fix it... :(
Thanks, Mike

Hey guys - problem 'solved':
I tested the OCZ SSD Vertex 3 120GB with following sata3 controller card http://www.lycom.com.tw/PE-115H.htm.
The card itself works immediately (needs at least PCIe x4 slot, will work slower otherwise but still faster than the OCZ SSD @sata1 with nvidia chipset).
There is some raid setup, doesn't apply to me, the boot even with the card is really only a few seconds longer and not annoying at all. Windows (7 x64) needed a driver, supplied on CD (which is cheap and making noise like h**l). The card works w/o the driver but doesn't harm to install it...
Also, just to clarify, this sata controller card did not need any specific setup at all. Just put it in, plug in sata cable (I use akasa sata3-rated), maybe change boot device in BIOS (I didn't even have to), done - booting Windows as usual.
Benchmark CDM with sata controller card Lycom PE-115H:
http://img24.imageshack.us/img24/3845/cdmpe115hahci0x00.png
http://img850.imageshack.us/img850/7549/cdmpe115hahcirand.png
Speed is much better than before with nvidia chipset 750a SLI controller: sata1 (sata2 whenever it randomly worked):
http://img839.imageshack.us/img839/505/cdmahci0x0.png
http://img13.imageshack.us/img13/6258/cdmahci0x0sata6contnv64.png
Final thoughts:
Well, I am happy with the SSD speed now (PCIe limited to 5Gbps). However, I had to spent quite some time to get it working on my sata2-cabable mainboard. Finally, I had to buy a extra controller card to get it working reliably at speeds faster than sata1. There is hardly any useful information on why this problem occurs with (older) nvidia chipsets and OCZ (sata3) SSDs. I still think that OCZ must know about this problem, but regards this issue as low priority, while at the same time not planning on giving up on sales to people with nvidia chipsets. Maybe OCZ should just make a big sticker on the box the drives come in with something like "Does/Might not work with nvidia chipsets, please use third-party sata controller card or different SSD manufacturer". But then none of these potential customers would buy OCZ SSDs...
I will keep the sata3 controller, anyway handy to have, but return the OCZ Vertex 3 120GB and replace it with a SSD from a different manufacturer (Corsair Force GT, Patriot and OWC are not that great to get around here). The benchmarks for most people will not achieve the maximum advertised OCZ speeds anyway, so why not go with a brand that allows for some plug'n'play with some customer support.
Hope this post helps others like me with their nvidia chipset + sata1 speed problem
Cheers, Mike

K9N2 SLI Platinum - Can't install OS, won't boot from CD

Similar Messages

Maybe you are looking for