K9N2 SLI Platinum nForce 750a AM2+ Windows will not start after loading drivers

Unit started and ran fine after initial Windows XP load.
After loading NVIDIA drivers (supplied with motherboard) unit boots up, shows Windows splash screen, but then screen goes black. Unit continues to run with black screen.
Any help will be greatly appreciated. Thanks!
Specifications:
Operating System = Windows XP SP3
Motherboard = MSI K9N2 SLI Platinum nForce 750a AM2+
CPU = AMD Athlon 64 X2 6000+ 3.0 Dual-Core AM2
Memory = 4GB PC6400 (2GB x 2) Super Talent part # T800UB2GMT
Case = Antec Sonata III ATX 500w ROHS Quiet Super Mini Tower
Video = MSI N9500GT-MD512 D3 GF 9500GT PCIe 512MB GDDR3
UPDATE:
I started Windows in Safe Mode and uninstalled the NVIDIA video drivers. Windows start up fine now, but I still need to work on getting the correct video drivers installed. I'll post my results later.

Chipset drivers ==> http://www.nvidia.com/object/nforce_winxp_15.24.html
VGA drivers ==> http://www.nvidia.com/object/winxp_178.24_whql.html

Similar Messages

HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

MSI K9N2 SLI Platinum nForce 750a Problem

I bought this barebone kit a couple days ago http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4692741&CatId=3508 and I had no troubles, I installed the 4GB Sli-READY 2GB RAM and thought that it wouldn't hurt to have another 4GB. So I bought the same RAM, and installed it, I started to get BSOD when I start programs, or games like "Lineage 2". I tried changing the voltage on DRAM but l can't change it to 1.8v, or 2.1v (2.1v says that the pc might be unstable) so l set it to auto. l also made it [AUTO] for SLI-READY DRAM. l still get BSOD.
Help would be greatly appreciated, the specs on the computer are:
MSI K9N2 SLI Platinum Motherboard
AMD Phenom X4 9850 Black Ed. 2.50GHz
OCZ SLI 4096MB PC6400 DDR2 / 8GB
Western Digital Caviar Green 500GB Hard Drive
Ultra LSP550 550-Watt Power Supply
(2) XFX nVidia 9800GT 512MB (1GB cause l have 2) SLI - Ready
Sound Blaster Audigy SE
My operating system is a Windows XP 64bit Edition.

Quote from: Younha on 04-July-09, 01:38:49
May you please explain how to use memtest and drop the mem. freq. to 667 and the 2T thing? :x
Memtest details ==> https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534
Quote
drop the mem. freq. to 667 and the 2T thing? :x
Apply "FSB/DRAM Ratio" in BIOS, 'Cell Menu' to 1:1.66
Quote
and the 2T thing? :x
By default it should be already 2T, verify that with CPU-Z memory tab{Command Rate} ==> http://www.cpuid.com/download/cpuz/cpuz_151_setup.exe

Help! import window will not disappear after loading wavs!

i have been trying to import a wav file into garageband (16 bit 44.1 kHz)... the wav visibly loads, but the "importing file" window remains... any advice / help would be tremendously appreciated!

first things to try for “oddball” probs:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs

W530: windows 7 not starting after updating drivers

Hello everybody,
Last night the Lenovo update application in my computer recommended me to do some updates, which I did, including upgrading the BIOS.
After flashing the BIOS, Windows 7 didnt load anymore.
the loading screen got stucked there for hours.
I did a startup recovery and the system said it couldnt repait it automatically.
The error log said: "A recent driver installation or upgrade may be preventing the system from starting"
What can I do to put things back to the state they were last night?
At first I thought it was the driver. I checked the bios screen and it says I still have the 2.55 version.. which makes things weird. But I installed the bios 2.6 from a cd and it didnt load windows either.
The recovery setting from lenovo will wipe my complete hard drive.
I need to find a solution to go back to the state of things last night without loosing my data.
Thanks!

They'll help you over here.
Windows
7 Repair/Recovery forum on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

I have a Pavilion dv7-1050ea with windows vista home premium 32bit.Windows will not start

Windows will not start in safe mode just back to blue screen error. HP recovory disks not working even in external drive. no access to command prompt. unable to install or run programs or copy any files to the hard drive. ran start up tests Memorypassed Primery hard disc passed Hard disk passed smart hard disc passed.

I would recommend performing a system recovery.
Here is a link with the information that is needed to perform this: http://goo.gl/bbxlv
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Windows will not start on my NB100

I think my nb100 has become infected with a virus. It was doing some strange virus scan and I could get it to do nothing else. I turned it off and now Windows will not start. I have tried all the option; safe mode, safe mode with command prompt etc. but nothing works. I cannot run the product recovery disk because this netbook does not have a cd drive. Can anyone help?

> . How do I make a bootable USB drive?
You can make a bootable usb drive in 2 ways:
1. Manually with command prompts
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53324&tstart=60
2 Automatically using programs like WinSetupFromUSB or Novicorp WinToFlash
http://myeeeguides.wordpress.com/2008/11/15/winsetupfromusb-install-windows-xp-from-usb-flash-drive/
Message was edited by: Jeka-??

Windows will not start up because of a corrupt or missing file how to fix

Windows will not start up because of a corrupt or missing file how to fix

http://support.apple.com/kb/HT2801?viewlocale=en_US

Trying to install firefox crashed my system and windows will not start, (only BSOD) what should I do?

I went to www.firefox.com
I downloaded the software
I went to my downloads file and double clicked to install firefox
The file disappeared from the downloads folder and I got the blue screen of death. and my machine crashed
Windows will not start anymore and keeps reverting to BSOD but I cannot read the failure code because the screen changes too quickly
I'm sending this from another machine

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

SLD will not start after I upgraded Netweaver 2004s Portal

SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy

Windows could not start after SP-3 update

Windows could not start after SP-3 update
After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I used the power button to shut down Windows & then booted into Mac OS X normally.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
Thanks for any help.

Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
Message was edited by: growler62000

TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

Just rented a movie in French on my iMac... movie will not start after download ?
What I do now ?

Okay. I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

K9N2 SLI Platinum nForce 750a AM2+ Windows will not start after loading drivers

Similar Messages

Maybe you are looking for