K9N4 SLI: Support of 3 GB in dual channel
Hello,
This is a great forum
I've a MSI K9N4 SLI (MSI 7325), AMD Athlon 64 x2 3600+ oced to 4000+ and two stick of one gb of ram.
Each module is inserted in different channels.
I want to add a new module of 1 gb ram, so my system will have 3 GB in total. So my question is: If I add a new module, will the memory work in single or dual channel? If yes or not, will at least work in single channel?
My system score 4,9 as processor and 5,9 memory. I'm using Vista x64 and all works good but I need a little more speed.
Thanks!
If even can works will be in single.
Use 1,2 or 4 memory modules.
For best performance and troubles free use 2x matched memory sticks only.
Similar Messages
-
this is a new build my specs are
motherboard k9n4 sli
cpu amd anthlon 64 x2 4600
ram ocz 6400 dual channel 2x 2gig
power supply ocz game extreme 700
video card evga 8800gts
hard drive wd 500 gig sata
heat sink ocz vendetta
so like the title says I can not get into the bios, I get a very loud single beep, now the best way I can describe the beep is as an angry beep. Sounds stupid I know. Now when I look up the beep it seems that it could be a memory or cpu, the cpu beep is described as high/low siren, I don't really get that, but it is higher pitched then a normal beep. I have tried moveing the ram around and only putting one stick in. I have tried to clear the bios. It seems that something is not working right or incompatable. my money is on the ram,cpu,or motherboard. The sad thing is I cant really switch out any of those things. I have the feeling that it might be the cpu,but would like some feedback before I rma anything.
any help would be greatly appreciated, ThanksQuote from: dazedone on 31-August-08, 12:43:17
not sure by which one do you mean
amd athlon 64 x2 4600 socket am2
probably the first thing to get upgraded but should be compatable or am i missing something
There are several models "amd athlon 64 x2 4600 socket am2".
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1087&maincat_no=1#menu
Also i've asked to double check that you have 4600+ {and not 6400+, because 6400+ is not supported}.
Have you plugged CPU FAN in CPU-FAN connector to the mainboard? {Not in SYSFAN} -
P7N SLI Platinum Unstable with over 2GB ram and/or dual channel memory on.
Hello need some help or to report something to MSI regarding blue screens, freezes when booting Vista 64 (SP1 + all fixes installed) with more then 2GB ram. Single channel mode works (either 1 stick of 2 GB or 3 sticks of 2GB) and is rock stable. Booting with 2 x 2 or 4 x 2 yields instability and blue screens.
I read over Microsoft's hotfix KB929777 however it appears this patch was applied during SP1. http://support.microsoft.com/kb/929777 - when I attempted to apply this hotfix I got the message this update does not apply to your system.
Memory tested in other gaming system using 4 sticks of G.Skill 1066 DDR2 ram and still have the same issues. Other forums like Evga.com, Tom's hardware and 411overkill.com tend to suggest some problem with this new bios version 2.0, written by Nvidia. Some others mention possibly an Nvidia nforce driver issue.
Therefore, under duress during testing - with 1 stick or 3 sticks of ram, all tests perfect and passes all stability tests, good marks in Sandra, plays any game. With 2 or 4 sticks of ram, very unstable won't stay up but for seconds.
Any ideas? (Tested 7 ways until Sunday!)
My other rig, rocks solid and stable with Vista 64.... It's the Evga new mainboard 780i with triple SLI (132-CK-NF78-A1), 8gb of Gskill 1066ddr2, MSI 8800GT (x2 sli mode) Q6600 @ 3.2 ghz - Raid 0 on dual WD caviar 640 gb/sata 3.0gb/sec. Seasonic 700w p/s. 8gb of memory and not a hiccup. Ram 2.0 volts, cpu @ 1.36v. Will handle the memory from both systems with out fault.
Considering I can swap memory back and forth and confirm it's not the sticks, swap graphics boards (own 3 of them!) and rule out that....
Fyi. Any help is appreciated!Dump question, but have you pickup the correct update e.g. for 64bit? ==> http://www.microsoft.com/downloads/details.aspx?FamilyId=91672C7C-614B-404C-850C-377541E93C18&displaylang=en
"This comes inside SP1 for vista 64, as noted with my other system during the build. "
Better double check it.
Install all four memory sticks and do a memory check with >>Memtest86<< 1st, ensure that no error(s) will comes during testing.
Also how about that?:
Quote from: BOSSKILLER on 07-April-08, 23:55:36
Remove your OC then see how its goes.
"When the system boots in single channel mode (only 2 or 6gb of ram meaning 1 or 3 sticks installed into the 4 slots) its' rock stable. When it boots into dual channel mode (2 x 2 sticks or 2 x 4 sticks) extemely unstable. "
That means, timings are too tight, or they need a bit more vcore help, or some of the memory stick has failure.
"MSI P7N SLI Platinum - MS-7380 - Bios 2.0 on Vista Ultimate 64-bit - all updated."
That BIOS is not for your board, you should use 1.xx -
I was recently... Uh.. Well I guesse the word would be "Forced" to upgrade my Pc to Vista after my old operating System (Windows XP ME 2002 edition) was no longer supported by Microsoft and the zune software. Basically It bricked my original Zune. Now I have Vista and it isn't too horrible. Except the only problem I have is I cant get my USB ports to register anything. My Keyboard and Mouse work, they both have their own drivers. But I cannot get my PC to register my USB Keys, Webcams, or the zune itself. Maybe I missed something on the main site but I can't find the correct drivers for the main board it seems.
I appologize If I am missing something on the forums or the webpages already posted. Thanks in advance for your help!
Edit: Sorry I missed some data ^.^ The board I have is the K9N4-SLI Model MS-7325. Chipset nForce4, Southbridge nForce4.You don't need drivers for usb ports.
But you do need drivers for devices.
Those are typical drivers from the manufacturers of the USB devices, like your webcam.
Has nothing to do with your board. -
Hello,
I searched the forum to see if my K9N4 SLI (nForce 500 SLI) will support Phenom? Officially MSI says not.
If not, will the future AM2+ processors compatible? For example Athlon with Rana core or Phenom 9900?
K9N4 SLI had 4 or 8M?
Thanks!"If not, will the future AM2+ processors compatible? For example Athlon with Rana core or Phenom 9900?"
Nop..
"K9N4 SLI had 4 or 8M?"
4 -
I live in Houston, Texas, and i purchased the K9N4 sli-F a little over a year ago, since then i have been using an 8800gtx, but lately i have been experiencing major over heating issues, so i've decided to purchase a new CPU cooler and a new GPU, and because of unbeatable deals on Newegg.com i have decided to purchase 2 Gts 250 1gb's... but i seem to have misplaced my Sli bridge, i did recieve one when i purchased my motherboard, but i never really thought id use it (go me!) and i never tried to keep track of it.. is there anyway i can recieve a replacement? i have already put in a request to customer service via email, but if its anything like other companies i know it will be a while untill i recieve a reply
http://computers.pricegrabber.com/accessories/Supermicro-AOC-SLIB-SLI-BRIDGE-DUAL/m24516191.html
http://www.ncixus.com/products/28972/SLI-12CM/Arctic%20Cooling/ -
I'm real close to buying the MSI K9n4-SLI-F MB. I dl'ed the manual and it seams to say that the PCIE 16x slots are only supported at 8X speed. I understand if that is true while in SLI, but is the 1st slot running at 16x with one vid card?
ThanksHappy to help. It should make a nice Christmas gift for him.
-
SLI support in new PP Creative Cloud?
Will the upgraded Premiere Pro (to be released in June) support SLI?
I see:
"Adobe Premiere Pro can now take full advantage of computers with multiple GPU cards for significantly accelerated export times. Rendering and compression just got a whole lot faster."
Can anyone elaborate on this statement? --Does this mean multiple GPU's not joined by SLI? Will it only be for faster export? Is this referring specifically to the Mercury playback engine? So many thoughts, so little time.
I've been thinking of getting a new 17" Sager laptop, with the SLI.I'm curious myself if this means SLI support, dual GPU card support (690), or simply two cards in the case support. (Or maybe all three?)
-
Hello guys,
I'm writing because I've a random reboot problem.
My PC randomly reboot even if I've Windows configured to not reboot if found a BSOD. I mean I've disabled reboot automatically option.
The problem occurs randomly. For example, I can play games without problems. But sometimes while I'm listening music, it reboot.
Event log entries are normal, no recorded error.
I ran many test and memory is OK, hard disk OK, video card OK. Processor works stable even when it's overclooked with MSI Dual Core Center.
When I had XP x64 installed, the random reboot problem was very frequent. Now I switched to XP Pro x86 and the random reboots still happen but less frequent than with x64.
I read mobo's manual and I found that this mobo need a power supply of at least 450 watt and mine PSU is 350. Can this be the problem?
My graphic card need at least 350 watt, so here I'm OK. But mobo need 450.
In summary, I'm 100% sure that hard disk, graphic card, ram modules and proccessor are OK Also, this problem happen with or without overclocking processor with MSI Dual Core Center.
Can be a faulty mother board or chipset? Or is probably the PSU of 350 watt?
I looked at capacitors and all appear to be normal.
Help!
Sorry for my English.
Best regards,
André
Details:
XP Pro SP2 x86 with all latest drivers, SP and patch
AMD Athlon x64 3600+
K9N4 SLI
Shapphire ATI Radeon x1550
Kingston DDR2 1 GB (I've two modules from 1 GB each one)
SATAII Seagate 160 GB
PSU 350 wattQuote from: agoujonm on 03-September-07, 06:06:35
Hi,
Thanks. I see your links and I noted that all recommended PSU are Enermax a one Corsair.
The model of Enermax I found near to me is this:
Maybe you don't know this specific model, but this looks a good one?
ENERMAX NOISETAKER ATX V 2.0 485W 20+4 PINES
http://www.enermaxusa.com/catalog/product_info.php?cPath=21_46&products_id=110
+12v1 22A 32A combine pw
+12v2 22A 32A combine pw
+3.3v 32A
Should work, but the main idea is to get a single rail PSU.. read why from the link which i give you before.
"Thanks. I see your links and I noted that all recommended PSU are Enermax a one Corsair."
you are missed the 3th link then: https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
or this one: https://forum-en.msi.com/index.php?topic=108998.msg808836#msg808836 -
K9N4 SLI Problem. Won't Boot Correctly.
Setup: (all parts are brand new)
MSI K9N4 SLI MoBo
AMD Athlon X2 6400
OCZ OCZ2G8002GK PC2-6400 Dual channel ram 2x 1Gb
2x EVGA e-GeForce 8600 GT GPUs (Only one hooked up so far)
ULTRA Pro 800 Watt SLI Ready PSU
Apevia X-Discovery Case
2x 320GB Caviar Hard drives SATA.
Problem: Won't boot to BIOs. The computer turns on but I get no screen. I have tried all possible positions for the ram and even tried both video cards, and still nothing. Any ideas anyone?Quote from: MamaLukuBuku on 01-February-08, 10:40:57
But I still want to know what the problem is. The board turns on, the fan on the board spins and everything else seems to work, why wouldn't I get a screen?
Well you have to swap some parts to find out.
Do you hear any beeps?
What D-Bracket shows?
Have you Clear CMOS Guide as suggested?
What is the newest PSU which you have tested? -
Looking for some more voltage love K9N4-SLI
Maybe one of you fine folks can help a brother out on a bios. I have the 1.51 bios for my K9N4 SLI-F board, and the one thing that's holding me back is a little more voltage out of my ram, and possibly a smidge on the north bridge. Is it possible to modify the bios so I can up the ram voltage? I'm running a 5000+ BE and I have plenty of cooling to keep the rig cool. I'm using 2x2gig sticks of GSKill pc6400 F2-6400CL5D-4GBPQ and a little more voltage would probably go a long way. Thanks in advance.
Quote from: lanman31337 on 04-April-08, 06:35:28
Again, this board is invaluable. You got me from 3000 to 3150, and I can probably keep going. Raised my ram to 2, northbridge and processor up .5. Running VERY cool, running VERY stable, thanks!
Nice -
I bought the k9n4-sli board for my son's xmas. I installed WinXP Pro with the proper sata raid drivers. It post, and then shows the windows logo for about 1 second and then the screen flashes to a blue screen that I can't read cause its only there about a half second. I have 2x 1 gig of OCZ Plat DDR2. Ive installed windows twice. Any ideas?
>>Moan Guide<<
-
No audio in Win 7 K9N4 SLI (MS-7325) with latest Realtek driver
I am running an K9N4 SLI (MS-7325) motherboard and cannot get sound to play in Windows 7 or Ubuntu 11.10. In Win 7, my driver is: 6.0.1.6305
Windows says there are no conflicts and everything is fine but I don't hear anything out of my headphone. Any ideas or direction? Thanks!Thanks for the replies... I have not tried reverting to an older driver since the only drivers available on the official website are only for Windows 2000 and older. According to the current driver, I have it in the Line Out jack on the back... I do not have any jacks in the front for line out audio.
-
Can any help me i have a 7600gs in a msi k9n4 sli f
i have a msi k9n4 sli and a asus en7600gs silent heatsink gcard (512mb) (pci express) and as i made my new pc i installed these new parts and to my surprise the asus 7600gs is showing up as runnin at 8x not 16x and i thought pci express cards ran at 16x can any1 help me plz
Quote from: DragoN89 on 17-January-07, 21:48:40
i have not got that option in my bios what should i do
give us full PC specification. read Moan Guide including PSU brand +details(can be found into PSU sticker).
what exactly mainboard model you have got? --> http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php?kind=1&CHIP=71&NAME=Socket%20AM2%20(AMD%20K9)
which one?
also where you see that PCI-E is x8?
have you installed chipset drivers 1st? -
Does the SONY VAIO F Series SVF15412CXB support dual channel memory?
Does the SONY VAIO F Series SVF15412CXB support dual channel memory? Or does it only have one slot?
I'm curious if I can put a second stick of RAM in there for dual channel performance.Hi Mark, Thanks for the response. Can you please double check that for me, or post a link to the documentation where you saw that? I asked this question on Newegg, too, and one of the respondants heard differently:
"i found out from sony that there is only 1 slot cause i was gonna get 1 more 4GB stick of ram for 8Gb. So iwas upset about that cause i have to get 8GB now and it costs 100$ for an 8Gb stick of ram on ebay. So this ram is expensive. So im sticking with 4Gb for now. This is a very good laptop though. I use it primarily for minecarft and steam and i get around 100 fps on minecraft so its good. I hope this helps." It's just confusing because other laptop advertisments I've seen openly stated how many RAM slots the computer had and how many were used upon purchase. I haven't found anything like that which makes me think that there's only one slot for RAM. Thanks,Gremark
Maybe you are looking for
-
How to change text of logon-popup-window from WAS ?
hi there, i have a link in an email, which links to a application in WAS. the user gets an POPUP where he has to enter Username and Passwort. Above UserID there is a text "SAP Web Application Server [P02]" (P02 is my system) does anybody know how t
-
Hi, I have a pc laptop with a partitioned hard drive, and my iphone back ups automoatically save to the C drive. I need them to save to the D drive instead, but dont know how to change the location of the backups. Can anyone help? Thanks, Mel
-
Priority issue in Support Desk in Solutionsolution Manager
Hi Guru's When we create the support Desk Message in solMan or thru any Satellite system, the email will trigger to the Concerned person, But in the Support Desk mail the priority is not appearing,we are using the solution Manager 4.0 ( Upgraded)
-
Multiple batches for a production order and mapping with components
Hello Gurus, Our business requires to create multiple batches for one production order + they want to trace which component in the production order has been issued to the main equipment. For example, I am creating production order for 'A' equipment f
-
Why do FONTS, drawRECT & drawCIRCLE Classes look so bad in iOS?
Hello, these look great on PC and MAC deployments. But they are from Adobe standard of rich graphcs that I am used to? It must be what i am doing wrong. Here are some screen shots off iPAD. The triangles are blown up. but you get the iodea. look at m