K9N6PGM2-V No Audio

Hello,
Can someone please help, I have 3 MSI K9N6PGM2-V Boards and the onboard audio doesnt seem to work on any of them... I have struggled for hours with these, the drivers have been installed from the CD, then I have also tried the drivers from the MSI drivers page and its still the same thing.
The systems are running Windows XP Pro, device manager shows an Unknown PCI Device on each of the systems when the HD Audio is activated in Bios, I have tried all the drivers I can find, however nothing is picked up for the sound... I have even tried Realtek HD Audio drivers from their site with no success...
Can someone tell me if there are any other drivers or are all 3 of these boards faulty
Live Update crashes when searching for updates each time... I dont know how to update the BIOS on these...
Thank You

Quote from: HelpMe2 on 23-November-08, 21:14:17
Hello,
Thank you, this is a Mobo only not a notebook I have tried as you said, however there doesnt appear to be any "MS UAA bus" installed under System Devices... :(
I have tried installing the Realtek Audio devices in Safe Mode, however that didnt have any effect...
Thank you
"Thank you, this is a Mobo only not a notebook I have tried as you said, however there doesnt appear to be any "MS UAA bus" installed under System Devices... :("
What notebook?
Look here how its named:
"I have tried installing the Realtek Audio devices in Safe Mode, however that didnt have any effect... "
Don't do that. Follow above or if its still not listed, then follow here:
https://forum-en.msi.com/index.php?topic=115476.0

Similar Messages

  • K9n6pgm2 - no front audio

    good day....  
    i purchased this casing that has a front audio jack, but when i cant get any sound.....
    my spex is k9n6pgm2 (mcp61p chipset) with AMD athlon 64 x2 dual core processor 5000+
    using windows vista ultimate sp1 64bit
    thanks

          
         aahhh!!! forgot to install realtek hd....      
    its working now... thanks!!!!!

  • K9N6PGM2-V, No Audio, PCI error in Device Manager, beeps on startup

    I've about had it with this board and its problems, but I thought that I'd give this one last shot before I try another board.
    No sound from the mobo, but USB headphones work OK.
    Athlon 64 X2 6000 3 GHz OEM Processor, Kingston 2048MB DDR2-667; all drivers and bios (9.3) updated; HD audio enabled in setup, XP Pro 32 bit; CPU running at 24 deg C. On startup there are two beeps that sound about the same length; one low pitch, then a high pitch. From the command prompt when I type mem, it says there is 1 gig of memory. In System Information it says there are 2 gigs. MSI is closed for the new year ... ! 
    I'm also not thrilled about all the crap that was installed in the tray.
    What shall I try next?
    ~ Dave

    Do you have Sp3 installed?
    https://forum-en.msi.com/index.php?topic=115476.msg867712#msg867712

  • About Front Panel Audio Connector: JAUD1

    In the User Manual for the K9N6PGM2 nVIDIA chipset mainboard, you are advised that pins 5, 6, 9 & 10 must be jumpered if you do not want to use the front panel audio but you want to use the back panel Line-Out instead, otherwise it won't function. 
    My question is (sorry if this is a silly question, only I'm new to building PC's  ), if you want to use both the front and back panel audio slots, as I do for my current system that I want to replace, will the Line-Out at the back work automatically (i.e. connecting up the front panel audio is enough), or do you have to set something else in addition.

    Of course, silly me   Thanks for clearing that up

  • Unable to capture audio

    Hi,
    Last week I updated the drivers for my Blackmagic Multibridge extreme. Now when I try to capture the material in FinalCutPro 5.1.4 I can see the picture, hear the sound on my monitors (they are connected directly to Multibridge), but the captured material doesn't have sound, because it takes the sound from the internal audio input. I tried to capture from Blackmagic Deck Control (an external application) and it works fine, it captures with sound. So I suspect I have to change the audio input in FCP, but dont know where. In audio/video settings in FCP everything is set to DeckLink (Multibrige extreme).
    Where is the problem?
    Thanks,
    Simon

    Thanks for the reply.
    Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

  • Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

    Hi !
    I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
    I can ingest audio with video using log and capture, then I know my card and my cables are working.
    I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
    I've been looking on the BM website, but I found nothing.
    Can you help me ?
    Thx

    Thanks for the reply.
    Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

  • Unable to capture 2 audio tracks

    FCP refuses to capture 2 audio channels?! I have one mic on channel 1 and another mic on channel 2 but FCP captures only 1 mono track eventhough in Clip Setting both channel 1 and 2 are selected. Does anybody know what could be wrong?
    Another thing is that when I have captured a clip - it won´t appear automatically in the Browser as it always has done? Now I need to import the Clip from my Project folder. FCP going crazy.

    Hi boxpuppy,
    iTunes is not able to import some Windows Media Player files. See this article for further information -
    Importing Windows Media Audio files with iTunes for Windows
    http://support.apple.com/kb/HT1844
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Audio malfunctio​ning on hp ultrabook?

    Hello! So i just recently got a laptop in late june almost early july.
    Its a HP ENVY touchsmart 4 Ultrabook
    Its not even 2 months old and the speakers on here suck. They kida slurr and like lag. Its stutters really bad. I can't listen to 1 song without it doing that. And sometimes it freezes but only very quickly. And also my down arrow button came off like within 2 weeks.
    This is my first Laptop so im not sure if i can return this and get a new one because its audio is malfunctioning and stuff? I have a one year warranty on this.

    Hello Gurjot24,
    If you want to return it rather than getting it fixed, please contact HP support over the phone to see what options are available.
    If you are in the US or Canada the number is 1-800-474-6836, if you reside in a different location click on this link. Click on your country, then click “technical support after you buy”, and the number will be provided.
    I hope everything works out.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • I have an apple iphone 4 that I want to download audio books from my library onto it.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    I have an apple iphone 4 that I want to download audio books from my library onto.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

  • Why does GarageBand audio work for guest user but not my account?

    Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
    About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
    This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
    After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account?  Then we will need to troubleshoot your preferences."
    I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

    If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
    But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
    Remove these files from your User Library to a folder on your Desktop:
    ~/Library/Containers/com.apple.garageband10/
    ~/Library/Preferences/com.apple.garageband.plist
    ~/Library/Caches/garageband
    Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
    You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
    Select the "Home" folder icon (the little house)  in the Finder's sidebar and press the key combination ⌘J to open the "view options".
    Enable "Show Library Folder".
    Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside:  ~/Library/Containers/com.apple.garageband10/,
    ~/Library/Caches/garageband  .

  • Does the mini DVI port cary audio if using a Mini-DVI to HDMI Adapter?

    Hello everyone,
    I've heard it is possible for a DVI port to transmit audio data to a HDMI connection if a DVI to HDMI cable is used, which will allow the sending of both audio and video to your TV. see: http://en.wikipedia.org/wiki/DigitalVisualInterface
    I'm assuming this is not possible using apples mini DVI port, but just wanted to check to make sure. My main goal is to get surround sound out of my powerbook. To do this by simply adding a Mini-DVI to HDMI Adapter would be GREAT!

    Hi Jonathan,
    I'm assuming this is not possible using apples mini DVI port
    Yup, no audio, unfortunately. The audio will have to transmitted separately via the analog audio output.
    Yang

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • How to connect my Macbook Pro to HDTV Polaroid with Audio

    I connect my cable mini dvi in my macbook pro to my screen Polaroid 40 "I have video but I have not audio, and I went to the System Preferences menu to change the audio output and can not hear anything on the screen
    thanks

    The yellow RCA jack is called "NTSC Analog Composite Video", or "Video" for short. You need an adapter to "Video".
    Exactly which MacBook Pro (or which output Display Port) do you have?

  • Need help to open audios attached in a PDF file

    Hello
    I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
    I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
    Please help me on what to do.
    Thanks

    Audio and video are not currently support on Adobe Reader. :-<
    You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99)

Maybe you are looking for