K9ND Freeze on entering bios setup screen

I got a new K9ND mainboard, with 2 X 2210, 2 X 2G DDR 2 667 REG ECC, AcBel 800W Power Supply.
I can startup the PC and pass the ram test.
And i pass the F2 key waiting to enter the Bios Setup screen.
But the screen hold in the the "Entering Setup..." for long time and with no response.
I have retry many time, Still can't enter the bios.
Anybody can help me? What the problem?

Just a question.
Have you actually placed both Memory Modules in the Yellow slots that are assigned to CPU-0????
The CPU in CPU socket 1 can stay there. (You do not have to remove it to test for entry into the BIOS).
You also need to let us know the exact version of your BIOS and Date.
Now at this point you should not have any other devices connected to your motherboard.
No DVD
No Hard Drives
No SATA Devices
No Floppy Drive
No Mouse (PS2 or USB)
The keyboard would be preferably a PS2 model. (Borrow one from a friend if necessary)
This way we can rule out any BAD USB Configurations in the BIOS.
Once all that is accomplished, power up and enter the BIOS.
Write everything down you can possibly see.
When the display screen comes up, hit ESC key to display the POST data.
Is the memory reading 4193280 kb or 4194304 kb?
Does it mention Dual Channel Mode or Single Channel Mode?
Please let us know and we'll gladly help you get up and running.

Similar Messages

  • 990FXA-GD80 V2 - can't enter BIOS setup

    This board has mostly been working fine. I have a FX-8150 in it, and I switched out the fan for a Coolermaster. Now, it boots, but when I try to enter BIOS setup, it hangs on "Starting setup..." (or something like that) at the bottom of the screen.
    I have tried clearing the CMOS (including unplugging) a couple times. Not sure what else to try...

    Quote from: flobelix on 21-June-13, 03:30:41
    Try with the board outside case on a non conductive surface and basic setup (one mem stick, cpu/cooler, psu, vga). Remove all drives and USB devices.
    That worked. Thank you. I am able to enter the BIOS setup. But will it still work in the case?
    EDIT: I did some searching and this is probably a case shorting. I noticed that one of the brass standoffs had come loose and was still attached to the screw when I took it out. I'm guessing that's what caused the short. I'll be more careful with the standoffs and see if that helps. Thanks for your help.

  • Cant enter bios setup on K8N NEO2 Platinum

    I have just finished building new box, loading XP, all my core programs , used live bios to update to 1.b and left for 3 days to burn cpu in (using folding program, stable and no heat problems encountered), now i cant enter bios setup , when i hit del to enter bios setup, i get a flashing cursor top left of a black screen and it just hangs there, no key commands work and it requires a reboot , all programs and bench tests are working correctly, i just cant get into bios to start tweaking. Any ideas or solutions would be appreciated.

    here you go:
    https://forum-en.msi.com/index.php?topic=88211.msg632728#msg632728

  • Cant enter Bios Setup with K8N Diamond

    Anyone know whats going wrong here ....
    K8N Diamond (Bios 1.7), Athlon64 3700+, 2 x 1Gb Corsair XMS-PRO 3200, ATI x300 PCI-E Graphics, 2 x WD 74GB Raptors in Raid 0 on Nvidia Raid, 1 x Samsung 120gb SATA drive on Sil controller. Running Windows x64 on the WD Raid setup and Win2k on the Samsung drive.
    Everything running at stock speeds/voltages etc.
    Both Windows x64 and Win2k are running stable - absolutely no problems at all. (Use F11 at bootup to select bootup option).
    Problem is that I cant get into the bios setup. Pressing F2 at startup just makes the system hang. Anyone any ideas.
    cheers
    Kryten

    Hello !
    I am not really sure, but wasn´t the "Delete" key the way to enter Bios Setup Menu ??
    If not i am sorry.......try another Brand of Keyboard. Cahnaging from USB to PS/2 Keyboard could also help.
    Greetz  MurdoK   

  • Help: MY MSI-865GM3-V keeps on restarting when i enter bios setup

    Good day.
    My computer always restart and it keeps on restarting then an error occurred "CMOS checksum error - defaults loaded" and when i'm trying to enter bios setup it restarts automatically.
    CPU specs:
    Processor: Intel Pentium duo 2.80GHz
    Motheboard: MSI-865GM3-V
    Video card: Inno 3d fx 52000-8x  256 MB AGP
    Memory: 512 MB DDR
    Hard disk: 80 gig MAxtor 7200
    i hope someone will help me on this thanks. 

    Quote from: Jack the Newbie on 15-April-07, 17:27:53
    What kind of PSU are you using?  List amperage(s) on the +12V-rail(s) also.
    Have you tried clearing CMOS? (remove main power plug from PSU first)
    When did this problem first appear? 
    i'm using ATX power supply 500W,  I'm not familiar with amperage stuff so i'll just write the list in the PSU
    INPUT | 115V ~ 10A   60Hz   230V  ~ 5.5A   50Hz
    Output   |   +5V   |   +12V   |   -5V   |   -12V   |   +3.3V   |   +5VSB
    500W     _______________________________________ ____________
    MAX       |   45A   |   18A     |   0.5A  |  0.8A    |  28A       |  2A
    I tried clearing CMOS in fact i changed the CMOS battery at first it work, I can run the BIOS again and the windows xp is working again then suddenly after 2 hrs. my pc restarts again and it keeps restarting again and i can't go to BIOS setup.
    It happen 3 days earlier when i'm just surfing in the internet then suddenly it restarts and since then it keeps on restarting.
    I'm using pentium duo core 2.8 GHz processor

  • How to enter bios Setup (not the F1 stuff, the splash screen display settings)

    So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
    but now I have no idea how to get back into that configruator.
    the Manual doesn't mention it, so question, how do I bloody do it?
    T430S 2542 btw

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • Portege Z30 - unable to enter bios setup

    Hi,
    I am unable to enter the BIOS setup upon boot. Pressing F2 allows me to enter both master and HDD/SDD password (validation confirmed), but the screen freezes at the "Toshiba Setup Utility" graphics without any progress.
    This problem started to appear quite suddenly, I did enter the BIOS setup several times before without any issue. The only change that happened as far as I know is a failed suspend/resume event.
    My suspicion is that the laptop is now in the hi-speed boot regime. Can anyone confirm that? Is there any way to force it to normal boot at the boot time? I am running Linux so I cannot use the Windows utilities from Toshiba.

    > I am running Linux so I cannot use the Windows utilities from Toshiba.
    Thats bad :( within the Toshiba HW Setup you would find a setting to change the boot speed option.
    > My suspicion is that the laptop is now in the hi-speed boot regime. Can anyone confirm that?
    Hmm in my opinion if boot speed would be set to fast, you would not be able to press F2 and to input the BIOS password.
    However, in other cases if boot mode was set to fast, you could enter the BIOS pressing firstly INS button and then F2 button
    Try it out.

  • Cannot enter BIOS setup

    I bought a new msi amd motherboard it cannot go into cmos BIOS setup it just says entering setup and it doesnt go any further, I have the pc down to barebones memory cpu and msi board.
    I have reset bios CMOS with jumper and battery out several times same problem.
    Will flashing the bios fix this problem or could it be that I found the memory is 1.65 volt and should of been 1.5 volt thought everything was recognized and working until windows7 said it completed its installation.
     Edited title, correct terminology is BIOS setup not CMOS.

    I have the same issue. After having pressed the Del key during booting up -  the computer hangs with "Entering Setup" shown in the bottom left of the screen.
    * The problem was orignaly found with the 1.0 version of the Bios but remains after upgrading to 1.5. With both versions the Bios was cleared with by switching the JBAT connector.
    * Memcheck86 has been executed and reports no error.
    * Attempts have been made with the SSD and BR drives detached with no joy
    Setup is as follows:
    1     MSI E350IA-E45, AMD E-350
                           Mini-ITX, Hudson M1, DDR3, 1xPCIe(2.0)x16, SATA 6Gb/s, USB 3.0, VGA,
                           HDMI
    1     Crucial DDR3 1066MHz 4GB KIT, CL7,
                           Kit w/two matched DDR3 2GB, 240pin
    1     Corsair SSD Nova Series™ V32, 32GB
                           SATA2, 2,5", 195MB/70MB/s read/write, incl 2,5" to 3,5" bracket
    1     Lite-On DVD±RW/Blu-Ray Reader, IHOS104
                           SATA, 4x BD-ROM Read, DVD±R: 12x, DVD±RW: 8x, Bulk, BLACK
    1     Ace Polly Mini-ITX Svart
                           Fan: 1x 80mm Back, 150W PSU, mITX, 18 dBA, 2x SATA, 2x USB2.0, HD
                           Audio

  • How to enter Bios Setup Satellite 4030?

    I'm searching for Informations how to enter the Bios Setup.

    To enter BIOS settings use ESC button.

  • Entering BIOS Setup

    I can't enter in BIOS Setup after installation of Windows 8 Pro ??

    As soon as you have powered up the laptop, try tapping the F2 key repeatedly. 
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • K8N Neo2 Plat and 1.B0 - No BIOS Setup Screen

    With K8N Neo2 Platinum (MS-7025):
    After flash to 1.B0 version, from 1.90, boots normally.  But, hitting Delete key to go to BIOS Setup, all I get is a blank screen with a white cursor in upper left - Won't go to BIOS Setup.
    Went back to 1.90 with no problems.
    Is this a known problem with 1.B0 version?
    Papa_K

    http://homepages.nildram.co.uk/~chsmith/Syars_Bios_Collection/NEO2/
    It's 70251b0.zip. A modded version of 1B that you can reach thru the above thread found in Syar's sig.
    Let us know if it works for you too.   
    JB
    EDIT.  I recommend winflash.  Don't use liveupdate.
    If you loaded live update on your computer then you have winflash.  Go to C:\Program Files\MSI\Live Update 3\FlashUty\Award but use it carefully, shutting down all other programs and selecting the boxes to clear cmos etc. as described here:
    https://forum-en.msi.com/index.php?topic=86257.0

  • Can´t enter bios setup/system does not boot

    Hi,
    I got a problem with my new KT6 Delta MS-6590 board.
    Sometimes after a prog is crashed and its better to restart windows, my System doesn´t boot anymore. It hangs after searching RAID-Disks. The Broadcom Dialog does not appear and the System stands. When I try to reset and would like to get into the bios setup I can´t enter it. The Delete Key do not work. After clearing cmos and going on with default values the systems works correctly until the next crash.
    The bracket says "Boot attempt"
    Whats the problem please help  ?(

    Read "KT6-LSR and installing Windows on SATA" post (At this moment is the last in this page). There you'll find many posts about Raid problems.  8)

  • U310 Touch Cannot Enter Bios Setup with NOVO Key

    I am trying to enter bios and have tried the following and failed.
    1) Through Advance Setup in Windows UEFI Firmware
    2) FN F2 / F2
    3) NOVO Key
    The NOVO gives me an option to Bios Setup but it just boot me back to Windows 8.1.
    I need on-site warranty on this laptop in Hong Kong.  Is the warranty international?
    Solved!
    Go to Solution.

    Hello,
    I don't have an IdeaPad U310 myself, but I'm wondering if you hold down the F12 key after applying power, does that give you a menu from which you can get to the BIOS?  That worked for me on a IdeaPad U410.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • MOVED: Help: MY MSI-865GM3-V keeps on restarting when i enter bios setup

    This topic has been moved to Intel P4 & Celeron P4 based board.
    https://forum-en.msi.com/index.php?topic=107624.0

    Quote from: Jack the Newbie on 15-April-07, 17:27:53
    What kind of PSU are you using?  List amperage(s) on the +12V-rail(s) also.
    Have you tried clearing CMOS? (remove main power plug from PSU first)
    When did this problem first appear? 
    i'm using ATX power supply 500W,  I'm not familiar with amperage stuff so i'll just write the list in the PSU
    INPUT | 115V ~ 10A   60Hz   230V  ~ 5.5A   50Hz
    Output   |   +5V   |   +12V   |   -5V   |   -12V   |   +3.3V   |   +5VSB
    500W     _______________________________________ ____________
    MAX       |   45A   |   18A     |   0.5A  |  0.8A    |  28A       |  2A
    I tried clearing CMOS in fact i changed the CMOS battery at first it work, I can run the BIOS again and the windows xp is working again then suddenly after 2 hrs. my pc restarts again and it keeps restarting again and i can't go to BIOS setup.
    It happen 3 days earlier when i'm just surfing in the internet then suddenly it restarts and since then it keeps on restarting.
    I'm using pentium duo core 2.8 GHz processor

  • Will not enter bios setup

    Every time i hit the F1 key on my HP Pavilion 7965 Desktop I get the HP screen and at the bottom of it, the message "Entering SETUP".  However that is as far as it goes.  It just seems to freeze and does not enter setup.  Does any one knows why and how I can get it to finish entering setup? 

    Hello darkfant,
    Pressing F11 on startup should enter the Advanced BIOS. If you press F11 on boot up does it do the same thing or is it just tied to the normal BIOS?
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

Maybe you are looking for