K9NGM and BFG 3D fusion 7600GS will not boot

I have recently upgraded my computer with new motherboard memory, processor and graphics card, see below
K9NGM-L bios V3.1
AMD X2 4200+
1Gb Geil DDR2 667 Mhz
BFG 3D Fusion 7600GS PCI-E
Windows XP SP2
550W PSU
The problem I have is that this will run fine on the integrated 6100 graphics card however, if I install the graphics card the system will not boot, remove the card and everything is fine.
I have returned the graphics card to the supplier as faulty and it has been replaced but the problem still remains.
I have also contacted MSI tech support and have followed their suggestion of clearing the CMOS and loading the optimised defaults but no joy.
Does anyone have any suggestions ?

give us PSU details. (can be found into PSU sticker)
go into BIOS, "Load Optimized Defaults" config "Y" then "SAVE AND EXIT",
back to BIOS navigate to "PNP/PCI Configurations", setup "Primary Graphics Adapter" to PCI-Express.
navigate to "Advanced Chipset Features", setup "OnChip and PCIe VGA selection" to Auto. then "SAVE AND EXIT".
power down PC, remove power cord from PSU and install your external VGA use PCI-E x16 slot. attach/move monitor cable from onboard VGA to BFG and fireup PC.

Similar Messages

HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up

I recently upgrade my OS and now my MacBook Pro will not boot up

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Windows 8 and Canvio Desk 3TB: System will not boot when external hdd is connected

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/HP-PAVILION-A6109N-amp-windows-8-System-w...
Hi,
just recently upgraded to Win Pro on my HP PAVILION A6109N. I also bought a toshiba canvio desk 3TB. What I notice is that if I reboot my pc with the extermnal HDD connected, my system will not boot.
I have check my BIOS boot settings and the order of the boot.
I have tried disabling USB Legacy Support in the BIOS
I have reformatted the external HDD
but still my desktop will not boot if the external HDD is connected....If I disconnect the external HDD...the system will boot up ....
I am at a loss....*** scratching my head ***

Update: The only solution for me was to format the drive as ext3 and plug it into one of my Asus RT-N66U USB ports, as most routers don’t yet recognize 3TB drives as NTFS. It’s not much help to people who don’t have a router with this capability, and it also slows transfer rates to ~12MB/s.
Given the short length of the cable, your only other options are to have the 3TB Canvio sitting right next to you so you can unplug from a front USB port before each boot, or place it towards the rear of your desk and crawl under the desk to disconnect it from your PC prior to each boot.
It's a pity because Toshiba produce great internal HDD's, but my experience when it comes to external drives is they're simply junk. I wish I had read the reviews before purchasing.

I changed the cracked screen on my 3gs, and screen works but it will not boot up and go past the Apple screen.

I tried recovery at least three times, and it says that it can not complete the activation at this time. I did take my Sim card out and try as well, because I had to use it in my old phone. I reopened the phone and double checked that everything was plugged back in from the screen change. What went wrong??? I restored it before and everything worked fine. It's not hacked or jailbroke, so I don't know what's going on???? Please help!

Yes, i did. I bought a screen repair kit and it was very simple to change. it works, but its stuck in recovery mode...

I recently updated to Mavericks, and now my macbook pro will not boot

Last week I updated my summer 2011 mackbook pro to the Mavericks OS, Now all I get when I turn it on is the grey apple logo and the loading wheel.
Ive tried booting in safe mode and it made no difference.
I left it loading for about 2 hours and it managed to boot up, it then took a further 40 minutes to load after I typed in my password but then I couldn't do anything.
Any help or suggestions? do you think if I to the genius bar they would be able to fix it?

There's really no telling what's wrong with your machine. A trip to your local Apple Store may be warranted as they have the diagnostic testing equipment to find out if you've a hardware or software problem.
Good luck,
Clinton

MSI Kt6 and NEW Msi 6600GT AGP will not boot up!

My Girlfriend's computer.
I put this new video card in today MSI 6600GT AGP .For the 2nd time.
It frezzing up at startup on this screen....
"GO TO SET UP ...Press F11 , F10 ,Tab: LOGO Ckecking NVRAM..."
I rma the 1st one . Now 2nd 6600 Gt card samething.frezzing up too.
This time I put it in my PC, MSI K8T Neo, 3000 64 processor (Socket 754)
It worked Great!!!
6600GT power cord is hooked up.
So it must be the motherboard?
The 6600Gt card box
MIN.System Requirements ,On the MSI BOX
DOESNT SAY ,You might need to Flash your BIOS!!!!
Ive never flash a bios,To SCARY!!!
MSI KT6 Delta-FISR ....5.10 bios
AMD Barton 2500XP
512 2700 333
True Blue 430 PS
CD burner
floppy
40 gig
I love MSI , Ive built 15 pcs, ALL with MSI motherboards!
Thanks
G

Hello!
Don't think you have to flash the BIOS. Nor do I think there is a problem with the mobo.
Two main reasons for boot problems are:
PSU with not enough grunt - please say something about it.
Memory timings are too tight - don't have any special or ultra settings.
The power cable has not been attached to the graphics card - don't know really if it is needed but I think so.
Please note that a weak PSU might not reveal itself til the power cable is connected.
About flashing BIOS, if you use the LiveUpdate program that came on the MSI install CD, it is no more trouble than upgrading any driver. But please make sure you get the right BIOS, and that it solves the issue you got.

Replaced Optical Drive now Mac book will not boot up

I bought a second hand Mac Book Pro A1150 model. It did not have an optical drive so I bought one, installed it and now my Mac Book will not boot up. When I take the drive out the Mac Book boots up fine. I was told that the optical drive although used was tested and work when it was shipped out. I'm a little new to Macs but not new to working on computers. Is it common for a possible defective optical drive to casue a Mac Book pr to not boot up or does this sound like an issue with the optical drive cable, or possibly the logic board?

That is true. I cannot think of any way to test the Optical Drive without swapping it into a known correctly operating MBP.
A thought which probably may not be an issue. When I installed an Optical Drive in my old (2006) MBP, I remember seeing in the instruction manual an item called a grounding pad (which looked like a tiny steel brillo pad with out soap) which was missing in mine. The MBP worked and I essentially ignored it. Perhaps that may not be case with your situation.
My thoughts are that the Optical Drive is malfunctioning and the cause of your problem. Perhaps you should consider getting a new replacement from OWC. But that entails a $100 risk with no guarantees of success.
Ciao.

An Album (CD) I have imported in my iTunes, and is on my iPod, will not sync over to my iPad. Why not?

An Album (CD) that I have successfully imported into iTunes, and synced with my iPod, will NOT sync with my iPad, even though I have done everything I know how to do so. When viewing the music in "On This iPad" mode, I can actually see the album there, but it is grayed out, and in the left hand column there is a circle with dotted lines, as if it is an incomplete download--which in essence it is. But I have the album (CD) in my iTunes and on my iPod, just like hundreds of other CD's--what's up with this one?
Another characteristic is that since trying to import this CD into my iPad, I cannot get a successful sync of the iPad now; the syncing process hangs up in "Waiting for changes to be applied" for 3 or 4 minutes, and then it just stops. No message that "The syncing process is complete. Please eject before disconnecting." The sync just quits on its own, so I take it that the syncing process was unsuccessful.
Now what?
Message was edited by: Padretimoteo

Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem.

HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section.

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out. I need these programs. How do I proceed?

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?

Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

My iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black

my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??

christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702

Mac Pro will not boot - HD and Machine are fine.

Greetings, and thank you in advance for your wisdom.
I have a 12-core Mac Pro, and she has been running like a dream. Once a month I run Onyx. Yesterday I did the same and upon reboot I got the grey apple screen and the spinning progress wheel that never stops spinning.
1. I repaired the HD via Disk Utility. All is fine.
2. The contents of the start-up drive are accessible - so the drive itself is not physically damaged.
3. I installed a new HD and made a copy of this Start-up disk via the Disk Utility. It will not boot from this drive as well.
4. I installed Snow Leopard (still using this) on the new drive to make sure the computer was happy. It fires up fine.
5. Everything is disconnected from the Mac Pro
So, I have obvious, and idiotically damaged the start-up disk using Onyx (assumption).
My life would be much better knowing I could do something that would enable me to boot from my current start-up and that's where I seek your wisdom.
Another question would be: If the above is not possible, if I install a fresh OS on the new drive, and then begin to replace all of the folders from the old drive (applications, library, etc.) will I be able to access my files as I did before. My issue is that I use this for music production, and there are literally close to 100 plugins that all have been registered. Going back through that process again would be days of labor, as some of these were purchases years ago. Tracking down serials would be a task. I think you understand.
So any advice that might prevent me from having to do as I said above will be wonderful.
Thank you all so much.
Lance

Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
from:
Mac OS X 10.6: Reinstalling Mac OS X
If your Hardware is functioning correctly, and your disk has no un-repaired Directory problems [Hint: run Disk Utility ( Repair Disk ) first] then re-installing Mac OS X modifies ONLY the files that are part of Mac OS X. Your Added Applications, User files (which contain preferences and serial numbers) are not supposed to be touched.

HT1351 my music is not on my ipod touch anymore but one of my other software called copytrans has my music backup so i got all of my music and videos back but they will not play in copytrans itunes or just my ipod touch itself please please help there????

my music is not on my ipod touch anymore but one of my other software called copytrans has my music backup so i got all of my music and videos back but they will not play in copytrans itunes or just my ipod touch itself please please help there???????????
there has to be a completley FREE software out on the whole internet downloads to fix my ipod touch musics completely free no money involved
please help me to fix this i jave all of my 6 thousand plus music with some videos back onto my ipod touch this happened to me this year well a week ago or two last year and also the years before to with or without any backups but i have my other software for that saved all of my stuff thank gosh but now nothings playing so i love itunes its the best but when it doesn't play or find my lots of songs makes me mad sometimes but anyways thanks for any or all the help you can to fix this problem
THANKS AGAIN:-):-)

my music is not on my ipod touch anymore but one of my other software called copytrans has my music backup so i got all of my music and videos back but they will not play in copytrans itunes or just my ipod touch itself please please help there???????????
there has to be a completley FREE software out on the whole internet downloads to fix my ipod touch musics completely free no money involved
please help me to fix this i jave all of my 6 thousand plus music with some videos back onto my ipod touch this happened to me this year well a week ago or two last year and also the years before to with or without any backups but i have my other software for that saved all of my stuff thank gosh but now nothings playing so i love itunes its the best but when it doesn't play or find my lots of songs makes me mad sometimes but anyways thanks for any or all the help you can to fix this problem
THANKS AGAIN:-):-)

I have an iphone 4 and it will not boot. I've done everything except downgrade the firmware to 6.1.3 or 6.1.4... is this what needs to happen and if so can I please get a link to do so? thanks

I have an iphone 4 and it will not boot. I've done everything except downgrade the firmware to 6.1.3 or 6.1.4... is this what needs to happen and if so can I please get a link to do so? thanks

Hi JACOBfromINSIDEaLION,
If you are unable to get your iPhone to restore, you will want to perform a restore from recovery mode, as explained in the following article:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

K9NGM and BFG 3D fusion 7600GS will not boot

Similar Messages

Maybe you are looking for