K9NGM not working with two sticks of RAM

Hi
I've not posted on here before.
I have recently built my own system - for details see below.
It has been working fine with dual boot into XP and Vista (Vista only installed after updating the BIOS to BOSSKILLER's version 3.23)
I have bought an extra stick of RAM and made sure it is exactly the same as my current stick.
I cannot get my system to work with both RAM sticks installed.
When booting into XP with the 2nd stick installed, the PC randomly freezes. Sometimes with a beep coming from the internal speaker.
The mouse and screen and keyboard just stop. This can happen at any time - but always within a few minutes of starting up.
If I try with Vista then it won't even boot. I can go into safe mode, but the last thing it does is load crcdisk.sys. Nothing at all happens after that.
I can use both OS's fine with just one stick of RAM installed. I have tried with both sticks independantly and both seem to be OK. I have also used memtest.org and all the tests complete with no errors.
I have checked the motherboard manual and can confirm that the two sticks are correctly installed in dual channel mode.
I have read elsewhere that adjusting the voltage settings of the memory in the BIOS could help, but there is no option for doing this in this BIOS version.
Any help or advice would be greatly appreciated
Thanks
JP
SPECS:
MSI K9NGM-L nForce 410 Socket AM2 SATA onboard VGA 8 channel audio mATX
AMD Athlon 64 X2 4200+ Socket AM2 (2.2GHz) L2 1MB (2x512KB) Retail Boxed Processor
2 x OCZ (OCZ26671024V) 1GB DDR2-667 PC2-5400 CL 5-5-5-15 VALUE SERIES MODULE (LIFETIME WARRANTY)

Quote from: jpmilne on 27-February-07, 21:07:54
Just an update to say that I have it all working now.
I did loads of memory tests etc.
Both memory sticks showed up no problems with the tests.
I eventually managed to find an update to the BIOS to version 3.3 and it's all working wonderfully now.
Boots into Vista and XP with both sticks installed - running Dual Channel no probs.
Cheers
JP
nice, thanks for feeback

Similar Messages

P67S-C43: Won't POST with two sticks of RAM

Hi, my new P67S-C43 has a peculiar problem: It won't POST with two sticks of RAM. I've tried both of my sticks (2 x 2GB G.Skill Ripjaws DDR3-1600 CL9 1.5V) individually in Slot 1 and the system POSTs fine. When I insert the second stick in any other slot, the system proceeds to restart unsuccessully a couple of times and then it will not POST. Only one blue LED is illuminated. When the system is in this state I have to reset the CMOS in order to POST successfully with a single stick of RAM again, which made the problem difficult to diagnose and very annoying to troubleshoot (lose BIOS settings after every attempt with the clear).
Any idea of when we'll see a new BIOS? Are any betas available? I'd like to see if this is a BIOS problem before RMAing it.
Thanks.

Quote from: HU16E on 14-January-11, 16:52:36
Which BIOS do you now have? Current official is V1.5. It would possibly help to have a full listing of all the systems components. Work with the one RAM stick initially in the primary dimm slot, blue closest to CPU. Get the OS loaded, drivers, etc., then add the second stick in the other blue dimm slot later. I have a feeling the RAM is setting itself up wrong. Might try the manual settings of 1333 9 9 9 24 @ 1.50V's.
The BIOS was 1.5 out of the box but it's my understanding from another thread that there have been a slew of beta BIOSs released. I'm not going to load the OS until I get this straightened out. Also, both sticks would have the same settings with one stick or two installed. I fiddled with voltage, timings, etc but it still wouldn't work when I popped in the second stick. LIke I said, after every attempt with two sticks I have to clear CMOS or it won't work again with one stick. I'm hoping to try a newer BIOS before spending more hours on this, one setting at a time.
Also, I have a 2600K but the rest of the components are irrelevant. At one point I had everything but the CPU/fan, video card, and RAM unplugged and the mobo entirely out of the case. Still didn't work until there was only one stick.

HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay

X11 on Leopard not working with two screens.

I have two screens on my Mac Pro and just upgraded to Leopard. X11 starts up on the main screen and any new X11 windows start up on that screen, which is fine, but then the window can not be moved to the other screen.
The window will overhang onto the second screen, but as you drag it over the window stops moving at the point that the mouse cursor reaches the edge of the main screen. The mouse cursor keeps going but the window stops.
Even if you then click on the portion of the window that is on the second screen, you can not then drag it the rest of the way into the second screen.
In Panther and Tiger I was able to move windows to the second screen.
Message was edited by: scm2000

I have also found that X11 does not work with 2 or more screens. I can not drag an X-Window to the 2nd screen at work (well maybe a few pixels onto the 2nd screen, that is all).
And I can not use the -geometry option on X-Windows based applications to position an X-Window onto the 2nd screen, it always ends up on the screen with the Menu Bar.
And this worked so wonderfully on Panther and Tiger.
I use my PowerMac G5 with dual 18" monitors at work. I develop kernel level software for Linux and Windows. I'm using X11 all day long when working with Linux systems both local and 2000 miles away (work has some nice in house bandwidth).
Being restricted to just a single monitor is a major limitation for my job. Having Mac OS X X11 support made it practical for me to use my Mac at work. Otherwise, I would have been forced to use a Windows box.

Datasocket does not work with two network cards

If I have two ethernet card in a PC. The Datasocket server does not work if the second card is enabled. It keeps displaying resolving IP Address. I am wondering if there is a solution for this problem.
Thanks

Thanks for you reply. One card has a static address(10.20.35.1), which is used for Data socket, and the other card uses a dynamic IP address. The card with dynamic address is only used for connecting the PC to the company’s network.
The second card, when turned on causes the Datasocket server problem. In the Datasocket Server manager I have only two IP addresses under Permissions Groups. (10.20.35.1 and 10.20.35.11. 10.20.35.11 is the IP address of the remote PC with labview application. The Datasocket is used to transfer data between the two PC’s)
I am wondering if my set up for hosts in Datasocket Server manager is not correct.

Visual Studio 2013 Community Azure Login Not Working with Two-factor Authentication

Has anybody had any problems logging in to Azure to publish when using Visual Studio 2013 Community and with two-factor authentication turned on?
I couldn't log on until I turned off two-factor authentication.
Regards

Hello John,
Thanks for posting here!
You can try and set a credential helper like
git-credential-winstore in order to cache your credentials. See if that helps.
Couple of questions here:
1) Are you using a MSA account by any chance?
2) When you turn on two-factor authentication, do you get any error message?
3) Did you try with different browsers?
Looking forward to your response!
Regards,
Sadiqh

"Edit this Bookmark" not working with two separate "bugs" in 8.1 and 10041 partitions (Nightly). FF x86 ( on Vista) works correctly.

An older bug is when I try to create a new folder; the currently selected folder becomes "edit mode"(highlighted) instead of creating a "New folder" in edit mode. Clip 1.
The newer bug is when I select a folder in which to place the desired shortcut; after [Done] the shortcut stays in [Unsorted Bookmarks]
Clips 2-5 in order.
This has been happening for about 3 days now and persists through nightly updates. Currently 40.0a1 (2015-04-26)

There is always the possibility that things are broken with Nightly alpha 1 builds.
It can take some time before those regressions are fixed, but that is the risk you run.
*Bug 1158553 - Bookmark has wrong localization info when editing it by star button
You can keep an eye on the "The Official Win32 xxxxxxxx builds are not yet out" threads in the mozillaZine Builds forum and reports issues in such a thread.
*http://forums.mozillazine.org/viewforum.php?f=23

Z97m 4790k infinite loop at bios code 03 with 2 sticks of RAM

Hello,
Just built a computer with
i7-4790k, Silverstone te01 cooler
MSI Z97m Gaming MOBO Bios 1.3 (current)
780 gtx
Silverstone Strider ST75F-P v1.1 on the haswell list..
Now the issue. The computer will not boot with two stick of RAM.
First ones were Crucial Ballistix Tactical 2x8gb that are not on the list. Works perfectly with one stick. as soon as you stick another one in the computer it won't boot past post Code 03. Then it reboots and goes on forever like that.
Second one are corsair CML16GX3M2A1600C11, 2x8gb which are on the list. Same issue as above. one stick works great. can oc to 4.7 and rock solid. as soon as you stick another stick in loop de loops at post code 03. I tried every slot, no dice. two stick=no boot.
I also tried taking the video card and all accessories out. still nothing. 2 stick=nada. But super stable with one stick...
so help? ideas?
Is it the MOBO? or should I go try another power supply? At this point I do not believe it could be the RAM.

Hi,
This sounds like motherboard's CPU socket has some bent pins, so check this please. Few times just to make sure it's not a bent pin. If no bent pins, then ok, refit CPU but without cooler yet. Look around RAM slots, maybe while you've been fitting the cooler (if not intel's stock) you have hit board with screwdriver. So look for any sort of scratches/hits around RAM slots and CPU socket. Also try clearing CMOS >>Clear CMOS Guide<<
At last I'd try different power supply WITHOUT the GPU.

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Two-finger pinch zoom not working with safari

Suddenly, the two-finger pinch to zoom is not working with Safari. MBP 13", SL 10.6.8 andf Safari 5.1. The View Menu Zoom control works fine, and the Pinch gesture works once thereafter, but then not. I have reloaded the Safari .plist. Gesture works with the Desktop icons and iPhoto. Any suggestions?
TIA
Picman

Ditto with the Newsstand-blocks-the-Home-Screen bug.
I was eager to see the revised New York Times layout and disappointed when Newsstand wouldn't pinch closed.
The irony is, we can finally "hide" the Newsstand in a folder but now it takes over our Home Screens. I'm hoping this will be fixed in the first update.

Working with two computers. One of them not working

I've been working with two computers. In one of them where I have already installed several programs downloaded with the Adobe Application Manager, when I try to open a program is giving me a message to sign in for a 30 day trial of the program? Why is this happening?

Try http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

890FXA-GD70 problems with 4 stick of ram

I just built a new rig around the 890FXA-GD70 MB and everything is going great except I have major stability problems with 4 sticks of Ram installed. I purchased 4 sticks of G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 from Newegg. The PC will boot fine with all 4 sticks installed and Windows 7 recognizes them but I have a lot of application crashes. No BSOD so far but very frequent app problems. Even the windows event viewer keeps crashing while trying to troubleshoot. I removed two of the sticks and everything has been rock solid. Anyone else successfully running 4 sticks in this board or have any suggestions to stabilize? I'm not trying to overclock anything at the moment.
thanks,

I had similar issues with BSOD. I thought it might be my RAM. I tried all kinds of different settings. Tested it in another system. It worked flawlessly and passed all memtests. I took that RAM and the RAM from the other system (a DELL from work) home. Tried the Dell RAM out and no post. Tried one stick in DIMM2 and it worked stably and then tried two sticks and it worked stably. I then tried my memory (ADATA). I got one BSOD, but ran several memtests and burnin tests over the next 5 or 6 hours. No more issues. SWEET. Reinstalled windows. Ran great for 4 or 5 days and then got more BSOD. I contacted MSI support and on two separate occasions they suggested I RMA the board. I returned the board and got a different one. I've been happy since (no issues whatsoever). I even bought two more sticks of RAM. I'm just saying - maybe it's not your RAM. I can't say for certain that the 890FXA-GD70 was defective. It may just need more BIOS updates. Frustrating to say the least. I feel your pain.
AMD 1055t
MSI 890FXA-GD70 - flashed BIOS to 1.6 early on to try to fix RAM issues (didn't help) = RMA
ASUS M4A89TD PRO
ADATA 4x2gb DDR3 1600
Nvidia GTS 250 on loan from a friend until I select a card
Antec True Power 750w
WD caviar Black 750
Lancool PC-K62
Zalman CNPS10X Performa

Kernel panics with both sticks of RAM but with either

Hey everyone. Thanks for taking a look at my panic logs. A couple notes are below, followed by the text from four panics. Any suggestions or tips would be helpful! I've already gone through and followed Dr. Smoke's instructions on trying to isolate kernel panics (no haxies, safe mode startup, no login items, &c.) I'm running 10.4.7 on a 1.5GHz PBook with two 1GB sticks of RAM.
1) don't know what the first one (Thursday's noon panic) is.
2) looks to me like the next three (Thursday's 7pm, Friday 5:30, and Friday 5:50) are all RAM problems?
3) I downloaded Rember to check out the RAM, even though my PBook's hardware test was clean, as was techtool's tests. Running Rember is what "caused" both of the Friday crashes.
4) I took one 1GB stick out of the computer and running Rember resulted in a clean run - I also switched which slot it was in, to see if there could be a problem there. BUT, I also ran the test with the OTHER stick of 1GB RAM and that one came out clean too!
5) I put both sticks in again and got a "failure" when Rember was "comparing the MUL."
6) I suppose what might be going on is that the system is using up a certain set of blocks on the RAM that Rember then doesn't have access to when there's only one stick in. If I could be sure that was the problem, I'd buy another stick of RAM and run Rember with one or the other to see if I could isolate which stick might be bad.
7) Until then, I suppose I'll run my computer with "just" one stick of RAM to see if it crashes at some point.
8) Do you think it could be a different hardware problem that doesn't allow ANY two sticks of RAM to be used at the same time?
Thu Aug 24 12:04:31 2006
panic(cpu 0 caller 0x000A853C): Unexpected user state trap(cpu 0): 0x00000000 DSISR=0x42000000 DAR=0x00000000000D6000 PC=0x00000000FFFF8A60, MSR=0x000000000200F030
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A853C 0x000ABD80 0x000AC0AC 0x67674151
backtrace terminated - frame not mapped or invalid: 0xBFFEE9D0
Proceeding back via exception chain:
Exception state (sv=0x521E5000)
PC=0xFFFF8A60; MSR=0x0200F030; DAR=0x000D6000; DSISR=0x42000000; LR=0x904017E4; R1=0xBFFEEAC0; XCP=0x0000000C (0x300 - Data access)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
Thu Aug 24 19:08:25 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000030 PC=0x0000000000223A3C
Latest crash info for cpu 0:
Exception state (sv=0x42814C80)
PC=0x00223A3C; MSR=0x00009030; DAR=0x00000030; DSISR=0x40000000; LR=0x00223A3C; R1=0x2C7DB1B0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0038FAAC 0x0021BB90 0x0023F6D0
backtrace terminated - unaligned frame address: 0x43B1187C
Proceeding back via exception chain:
Exception state (sv=0x42814C80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x52CA9280)
PC=0x900061CC; MSR=0x0200F030; DAR=0x43B11FA4; DSISR=0x40000000; LR=0x00015AE0; R1=0xBFFFEE30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8404 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42814C80)
PC=0x00223A3C; MSR=0x00009030; DAR=0x00000030; DSISR=0x40000000; LR=0x00223A3C; R1=0x2C7DB1B0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0038FAAC 0x0021BB90 0x0023F6D0
backtrace terminated - unaligned frame address: 0x43B1187C
Exception state (sv=0x52CA9280)
PC=0x900061CC; MSR=0x0200F030; DAR=0x43B11FA4; DSISR=0x40000000; LR=0x00015AE0; R1=0xBFFFEE30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
Fri Aug 25 17:32:07 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000E022FE35 PC=0x000000000005FB00
Latest crash info for cpu 0:
Exception state (sv=0x42648000)
PC=0x0005FB00; MSR=0x00009030; DAR=0xE022FE35; DSISR=0x40000000; LR=0x0005DBDC; R1=0x2C66BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000E83FC 0x00062260 0x00062920 0x000A885C 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42648000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42A66C80)
PC=0x907DEA04; MSR=0x0000D030; DAR=0x000E0000; DSISR=0x42000000; LR=0x907DE7B4; R1=0xF0100FD0; XCP=0x0000000C (0x300 - Data access)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8404 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42648000)
PC=0x0005FB00; MSR=0x00009030; DAR=0xE022FE35; DSISR=0x40000000; LR=0x0005DBDC; R1=0x2C66BC70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000E83FC 0x00062260 0x00062920 0x000A885C 0x000ABD80
Exception state (sv=0x42A66C80)
PC=0x907DEA04; MSR=0x0000D030; DAR=0x000E0000; DSISR=0x42000000; LR=0x907DE7B4; R1=0xF0100FD0; XCP=0x0000000C (0x300 - Data access)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
Fri Aug 25 17:49:03 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000B01C0060 PC=0x0000000000220C9C
Latest crash info for cpu 0:
Exception state (sv=0x42945780)
PC=0x00220C9C; MSR=0x00009030; DAR=0xB01C0060; DSISR=0x40000000; LR=0x00220C78; R1=0x2C7AB610; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00220D48 0x00231C6C 0x000F9604 0x0010DE00 0x0010E03C 0x000FB760
0x000E2524 0x000E20B8 0x000F5118 0x000ED468 0x000ED828 0x002AAF98 0x000ABF30 0x6B657926
Proceeding back via exception chain:
Exception state (sv=0x42945780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x51DA7780)
PC=0x90001E4C; MSR=0x0200F030; DAR=0x000F9014; DSISR=0x42000000; LR=0x00005488; R1=0xF007EB30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8404 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x42945780)
PC=0x00220C9C; MSR=0x00009030; DAR=0xB01C0060; DSISR=0x40000000; LR=0x00220C78; R1=0x2C7AB610; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00220D48 0x00231C6C 0x000F9604 0x0010DE00 0x0010E03C 0x000FB760
0x000E2524 0x000E20B8 0x000F5118 0x000ED468 0x000ED828 0x002AAF98 0x000ABF30 0x6B657926
Exception state (sv=0x51DA7780)
PC=0x90001E4C; MSR=0x0200F030; DAR=0x000F9014; DSISR=0x42000000; LR=0x00005488; R1=0xF007EB30; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
1.5 GHz 15 PowerBook Mac OS X (10.4.7)

Memtest, which is what Rember is just putting a GUI around, doesn't cause panics. Also, the best test is Memtest done from the command line in Single User Mode. Consensus seems to be that AHT and TechTool Pro 4.1.x (don't know if they managed to improve 4.5.1, but if they did, it would be to just include Memtest in their own routines probably) are both weak on memory testing.
According to users and MacIntouch reader feedback, iTunes is actually one of the best applications and where problems may show up.
memory can differ enough in timing, voltage, construction so that even memory from same vendor/maker will "not get along" which is why it is always best to buy together sometimes. Even Crucial had trouble summer '04 when Apple made small changes in the G5 and DDR400.
If AHT doesn't find any problem with the logicboard, cpu, or RAM slots then I would just try to replace the RAM for say 2 x 1GB? from a known brand.

MDT 2013 not working with older systems

We have been using MDT 2012 with no issues on any of our Dell systems. I just upgraded our Test Bed to MDT 2013 along with ADK for Windows 8.1. After upgrading and getting the new WIM files created, it does not work on two of our model systems. It gives
the message listed below when trying to boot into the WIM. These two systems are Dell Precision Workstations 370 and 380, both 64-bit Pentium 4 machines. It works great on all of our other system models. I checked the Execute Disable and it is enabled, but
neither model has virtualization. Does not having virtualization and UEFI play a factor? Thanks.
Your PC needs to restart.
Please hold down the power button.
Error Code: 0x0000005D
Parameters:
0x03060F06
0x756E6547
0x49656E69
0x6C65746E
Mick

Known issue:
http://social.technet.microsoft.com/Forums/en-US/387b31cc-66d8-46c6-aae9-fb1e527ba72a/windows-7-image-deployment-failed-in-hp-model-d530-using-mdt-2012-and-adk-80?forum=mdt
1) Upgrade your machines with modern processors that support the ADK.
or
2) Downgrade to the WAIK
http://www.microsoft.com/en-us/download/details.aspx?id=5753 and stick with Windows 7.
Keith Garner - keithga.wordpress.com

K9NGM not working with two sticks of RAM

Similar Messages

Maybe you are looking for