K9VGM-V 1440x900 support
Hello,
I just got the K9VGM-V motherboard with AMD 64 4200+ processor. I'm using a 19 inch wide screen monitor.
I can't setup for 1440X900 resolution. I read in places that a bios update is needed for this support.
Is there an update for this board for 1440x900 support?
Hoyt
Thanks for posting back that the update seemed to address the issue. I couldn't tell you as the bioses don't seem to be listed for that board. Did you use Live Update? If you did, you must've followed the directions well and had a stable Windows environment. LU has been known to fail too often which is why we don't recommend using it. Good to hear you have it worked out.
Similar Messages
-
External Display 1440x900 supported?
Hi folks... Perhaps someone here has direct experience with this, or can do a test with your setup.
There's a nice widescreen Samsung LCD monitor with 1440x900 resolution (model number 941BW). Does the external VGA output of a 400/500 MHz TiBook (the first generation model) support this particular resolution? I know it can actually go higher, probably up to 1600x1200, but I don't know if this widescreen ratio (1440x900) is supported.
Thanks of any info...Hi Kenichi,
The following is from the 400/500 owners manual (the formatting got lost in the copy/paste, but as 1440x900 is not listed, it does not appear to be supported; of course you can always use a different resolution, but as you probably already know, the monitor will look best at its native resolution):
External Monitor in Extended Desktop or Video Mirroring Mode
With the PowerBook G4 display set at 1152 x 768 in millions of colors, an external VGA display supports:
Up to millions of colors in the following resolutions: 512 x 384, 640 x 480, 640 x 870, 800 x 600, 832 x 624, 1024 x 768, and 1152 x 870
Up to thousands of colors in the following resolutions: 1280 x 960, 1280 x 1024, and 1600 x 1200
Note: Selecting a resolution greater than 1152 x 768 in video mirroring mode causes the image on the external monitor to scale down (not take up the entire screen) to match the 1152 x 768 resolution of the internal display.
External Monitor in Display Closed Mode
Up to millions of colors in the following resolutions: 640 x 480, 800 x 600, 1024 x 768, 1152 x 870, 1280 x 960, 1280 x 1024, and 1600 x 1200
Up to thousands of colors in the following resolutions: 1792 x 1344 and 1856 x 1392 -
Bootcamp running XP & effects on PC gaming
Has anyone tried to run Bootcamp on an Intel Core Duo system and played some PC games on the Mac?
I've invested several hundreds of dollars in PC games (because no one develops games for Mac) and want to know if the gaming performace from an Intel Core Duo running XP is similar to running on a PC.just installed Call of Duty 2 and it works well
1280x720 (1440x900 supported but choppy)
wide 16:9 aspect ratio
60hz
bilinear texture filter
2x anti aliasing
rendering method directx9 (directx7 would be a lot faster)
shadows on
low dynamic lights
world only soft smoke edge
tiny number of corpses
i'm sorry i just don't know how to show the FPS count within the game. don't have time to mess around with the config file. -
1440x900@75Hz not supported on my monitor?
Hello all, I have a Mac Mini bought from 2008, and I have it hooked up to my LCD monitor.
I have it set up right now at 1440x900 at 60Hz, but it doesn't seem to allow me to move it up to 75Hz. The thing is, though, this monitor definitely supports 1440x900 @75Hz. I have a Windows computer that uses this monitor too, and it can do 75Hz at the same resolution.
I have looked at the display settings in both Leopard and the most recent version of Snow Leopard, both are the same. They only allow me to go to 60Hz (in fact, 60Hz is the only non-grayed out option in the refresh choices).
The monitor is an Envision G19LWK. It is hooked up through a DVI cable.
What is the problem here? Is there a way to override this?Hello Euchre, thanks for the reply, and sorry for the late response.
I tried out that program, but whenever I set it to run at 75Hz, the screen stays blank. I have to reboot the Mac to get it back to a working display resolution and refresh rate.
However, it seems I've solved the little problem here on my own. Hooking it up via VGA oddly enough allows me to run it at 75Hz. The reasoning behind this is beyond me, but its nice to see things move around at this refresh rate.
Message was edited by: Mjolnir1134 -
Supported Graphic card for MSI K9VGM-V, AMD 64 Athlon X2
Hi Guys, I'm about to buy Graphic card for MSI K9VGM-V 64 Athlon X2. May you, please, let me know Which Graphic Cards are supported by my system. If it's possible i want to know all the price range Cheap from highly cost.
Thanks Buddie. Good work Keep up
-
K9VGM-V (VIA K8M890) doesn't support 8800GT (PCIE 2.0)
I've heard that some Gigabyte and Asrock motherboards based on the VIA K8M880 chipset doesn't support PCI Express 2.0, even though 2.0 should be backwards compatible with 1.0a motherboards!
Yesterday when I put together my system, with a K9VGM-V (bios ver 1.7) and a Asus 8800GT the computer booted (all the way into Windows) with no signal from the video card. the fan was spinning at 100%, the exact same symptoms of the PCI2.0 problem. It worked fine with the onboard card.
Even after cleared CMOS, disabled onboard vga and a lot of different troubleshooting and BIOS settings, I gave up.
Could it be that the VIA K8M890 also suffers from the same problems as the K8M880 boards, no compatibility with any PCIE 2.0 cards? If so, why isn't it mentioned anywhere?
As far as I know the only solution is to flash the graphics card bios with a PCIE GEN1 bios. Luckily ASUS supplies their own BIOS, so I don't have to use another brand's bios. Does anyone know if I'm on the right track here, or if the card should work without a flash?
and maybe MSI is planning a BIOS update for this motherboard to support this card? I'm guessing the next batch of 8800GTS's also won't work, as those are PCIE2.0 as well!
edited to comply with the Moan Guide:
# AMD Athlon64 x2 5600+ 2.8GHz Windsor
# MSI K9VGM-V Socket AM2 BIOS Ver 1.7
# Corsair XMS2-5400C4 2x1GB DDR2
# ASUS EN8800GT 512MB PCI Express 2.0 x16
# Maxtor DiamondMax8 80GB
Samsung Spinpoint 160GB
# Creative Soundblaster Audigy4
# Microsoft WindowsXP SP2
# Hiper Type-M 580W (Crossfire Rated for two Radeon X1950)
+12V 1 ---------- 20A
+12V 2 ---------- 18A
edit: I have now flashed my Asus 8800GT 512Mb with Asus' own GEN1 BIOS and I can confirm that IT DOES WORK!Quote
Could it be that the VIA K8M890 also suffers from the same problems as the K8M880 boards, no compatibility with any PCIE 2.0 cards? If so, why isn't it mentioned anywhere?
That seems pretty obvious, don't you think? It is a chipset limitation. You will have to contact Asus about getting a suitable bios for that card. Like Aaron Yuri already said: the chipset cannot be changed. -
External 1440x900 monitor doesn't work in Mavericks
I have a 19" LG monitor with native resolution 1440x900. When I connect it to my MBP Retina using a VGA->mini display port adapter it goes to 1280x960 resolution. When I Alt-Click the "scale" options, 1440x900 isn't even shown and "best for monitor" goes to 800x600!
The same monitor works perfectly when connected to a Windows 7 laptop, and another (1920x1080) monitor works fine (and shows 1440x900 in the list of possible resolutions). I've tried two different VGA->mDP adapters, and two different VGA cables with exactly the same result. Short of buying another monitor is there any solution to this? Is the monitor faulty?
ThanksHello meadowend,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning display issues:
Apple computers: Troubleshooting issues with video on internal or external displays
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
What can I do to resolve this? ... Can someone help me with this?? ..
Thank you for your help!Hi, we're out of luck...
MAC SYSTEM REQUIREMENTS
MINIMUM system requirements:
Intel® processor
Mac OS X v10.5.x
1024x768 resolution
CoreAudio compatible soundcard
1024MB RAM
50MB free on the hard drive
RECOMENDED system requirements:
Intel® processor
Mac OS X v10.6.x
1440x900 resolution
Multi-channel CoreAudio compatible soundcard
2048MB (2Gb) RAM
200MB free on the hard drive
Additional requirements for Video mixing:
ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
Video must support dual-screen output
Supported Operating System and Processor Platforms:
MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported
http://www.virtualdj.com/products/virtualdj/index.html
Might see if the still have version 6.x here...
http://www.virtualdj.com/download/updates.html -
Cannot use 1440x900 resolution with fglrx no matter what I do
I have used hwd and got a configured xorg.conf and I added "1440x900" to the modes list but it does not work. I have even copied over my working xorg.conf from ubuntu and sabayon and it works for every resolution EXCEPT 1440x900. I seems like everything think I do to add 1440x900 it just ignores it. The xorg.conf below is from hwd and I added the "1440x900" but in GNOME I can only use 1024x768 , 800x600 and 640x480. What am I doing wrong?
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 30 - 70 # Warning: This may fry old Monitors
VertRefresh 50 - 160 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by jae1227 (2007-08-13 02:14:47)MrWeatherbee wrote:
If you are having issues with an ATI card as your xorg.conf shows (you also mentioned nvidia, so I'm covering my butt), you may want to see my posts and others in this thread:
http://bbs.archlinux.org/viewtopic.php?id=35753
Basically, it discusses that sync, refresh, and modes / modelines don't work very well with "fglrx" driver, at least in my experience. The simplest xorg.conf lines relative to your video card and monitor sections will likely work best. I had similar issues (and more) with trying to include very specific xorg.conf code for those sections, and I had to resort to leaving it close to the bare-bones setup created by aticong --initial to get everything to work properly.
I'm back to the radeon driver (for aiglx) now, so I can't do any testing for you. But hopefully the above info let's you know others have had similar issues.
I tried to do what you said. I ran xorgconfig again and then ran aticonfig --initial. I started up GDM and it did not work, well something worked but my monior said it could not display it. Now my guess is that it could have worked but the resolution was set too high on GDM and my monitor could not handal it. So I added the HorizSync & VertRefresh. Now I have used the HorizSync & VertRefresh in Ubuntu and Sabayon with fglrx and it works great. I have another computer with an Nvidia card that runs Arch and it works great on this monitor at 1440*900. When I start GDM it picks its own resolutions regradless of what I have in the Modes section. As of now I can display:
1920x1200
1920x1080
1600x1200
1280x1024
1280x720
1152x864
1024x768
800x600
640x480
Here is my xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# unsupported card
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "ATI"
Driver "ati"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "ATI"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
And here is my Xorg.0.log:
[code]X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux AMD 2.6.22-ARCH #1 SMP PREEMPT Thu Aug 2 18:27:37 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 11 14:30:12 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,8141 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,710a card 17af,0b12 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,712a card 17af,0b13 rev 00 class 03,80,00 hdr 00
(II) PCI: 05:08:0: chip 1102,0007 card 1102,100a rev 00 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x00009fff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd1ffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc R520 [Radeon X1800] rev 0, Mem @ 0xc0000000/28, 0xd1000000/16, I/O @ 0x9000/8, BIOS @ 0xd0000000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x712a) rev 0, Mem @ 0xd1010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[2] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[3] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[4] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[5] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[6] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[9] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[10] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[11] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[12] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[13] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[14] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[16] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[17] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[18] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[19] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[21] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[22] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[23] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[24] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[2] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[3] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[4] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[5] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[6] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[9] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[10] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[11] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[12] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[13] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[14] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[16] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[17] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[18] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[19] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[21] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[22] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[23] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[24] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[6] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[8] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[9] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[10] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[16] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[17] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[18] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[19] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[20] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[21] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[22] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[23] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[24] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[25] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[26] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[28] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[29] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[31] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.39.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.39.4
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.393.1
(II) ATI Proprietary Linux Driver Build Date: Jul 20 2007 13:50:07
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x710A) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[6] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[8] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[9] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[10] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[16] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[17] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[18] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[19] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[20] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[21] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[22] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[23] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[24] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[25] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[26] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[28] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[29] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[30] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[31] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e72b8
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[6] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[8] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[9] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[10] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[19] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[20] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[21] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[22] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[23] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[24] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[25] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[26] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[27] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[28] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[29] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[33] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[34] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "Radeon X1800 Series" (Chipset = 0x710a)
(--) fglrx(0): (PciSubVendor = 0x17af, PciSubDevice = 0x0b12)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xd1000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R520
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.39.4
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 225 Serial#: 1212231993
(II) fglrx(0): Year: 2006 Week: 42
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate Composite SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 41 vert.: 26
(II) fglrx(0): Gamma: 2.35
(II) fglrx(0): DPMS capabilities: StandBy; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.636 redY: 0.349 greenX: 0.290 greenY: 0.589
(II) fglrx(0): blueX: 0.143 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 106.5 MHz Image Size: 410 x 257 mm
(II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HVELA46878
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2d250239314148
(II) fglrx(0): 2a1001030e291a878ad7a5a2594a9624
(II) fglrx(0): 145054bfef809500950f81808140714f
(II) fglrx(0): 0101010101019a29a0d0518422305098
(II) fglrx(0): 36009a011100001c000000fd00384b1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 004856454c4134363837380a20200091
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 520/495MHz @ 0Hz [enable load balancing]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 38 modes found for primary display.
(--) fglrx(0): Virtual size is 1920x1200 (pitch 0)
(**) fglrx(0): *Mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 +hsync
(**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080" 172.79 1920 2040 2248 2576 1080 1081 1084 1118 +hsync
(**) fglrx(0): Default mode "1920x1080": 81.6 MHz (scaled from 0.0 MHz), 33.6 kHz, 30.0 Hz (I)
(II) fglrx(0): Modeline "1920x1080" 81.64 1920 1984 2176 2432 1080 1081 1084 1119 interlace +hsync
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (410, 260) mm
(--) fglrx(0): DPI set to (118, 117)
(--) fglrx(0): Virtual size is 1920x1200 (pitch 1920)
(**) fglrx(0): *Mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 +hsync
(**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080" 172.79 1920 2040 2248 2576 1080 1081 1084 1118 +hsync
(**) fglrx(0): Default mode "1920x1080": 81.6 MHz (scaled from 0.0 MHz), 33.6 kHz, 30.0 Hz (I)
(II) fglrx(0): Modeline "1920x1080" 81.64 1920 1984 2176 2432 1080 1081 1084 1119 interlace +hsync
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(II) fglrx(0): [pcie] 126976 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd1000000 - 0xd100ffff (0x10000) MX[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[7] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[b]
[8] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[b]
[9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[10] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[b]
[11] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[b](B)
[12] -1 0 0xd1000000 - 0xd100ffff (0x10000) MX[b](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[14] -1 0 0xd1010000 - 0xd101ffff (0x10000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[18] 0 0 0x00009000 - 0x000090ff (0x100) IX[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[b]
[22] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[b]
[23] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[24] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[25] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[26] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[27] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[28] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[29] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[30] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[31] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[32] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[34] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[35] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[36] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[37] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading sub module "glx"
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed -
Why do 15.4" Macbook Pro's not support resolutions greater than 1440 x 900?
Hi.
I am a Microsoft .net software developer and am seriously considering getting a Macbook Pro to do some iPhone development. My company has provided me with a 15.4" Dell Precision M4400 that features an LED-backlit screen and nVidia Quadro FX 770M discrete graphics card, supporting 1920 x 1200 native resolution. I'd like to know why the 15.4" Macbook Pro's do not support anything greater than 1440 x 900 when it seems entirely possible? I understand that 17" MBP's do support 1920 x 1200 but it is not currently an option I'm considering pursuing due to the increased size and weight.
Thanks.
Jon
Message was edited by: jonb86ukJust to be clear, since you're bringing up graphics cards - the 15" MBP supports up to 2560x1600 resolution on an external display, and simultaneously supports full native resolution on the internal display. As Phil points out, the native resolution of the 15" MBP's internal display is 1440x900, and Apple does not offer a higher resolution option for that model (although higher resolution 15" displays do exist). As to why that's the case, only Apple can answer that or change that.
You can submit feedback to Apple: http://www.apple.com/feedback/macbookpro.html.
As you know, if you want to use the iPhone SDK, you need an Intel-based Mac running Mac OS 10.5 Leopard.
Ps. Welcome back, Phil!! -
K9VGM-V (How Do I Setup Raid 0)
Hi guys, I have a K9VGM-V board, very pelased with it, no probs so far.
I am gonna buy myself 2 new sata hard drives (identical ones) and would like to set them up in a Raid 0 array, only prob is I have never attempted a Raid array before.
I will be installing Vista Ultimate 32 bit (please guys don't laugh!).
Would anyone be able to guide me through the process, what drivers i need etc.
Your help will be highly appreciated.
Thanks
AdamYou can see how to proceed here: http://www.msicomputer.com/support/sup_tshoot.asp#3_4
also if your HDD's are SATA2(most probably) you will need to limit them to SATA1. What brand and models are they? -
K9VGM-V network adapter information
I just bought a K9VGM-V and i wanted to connect my old computer to it via ethernet to get my old files.
anybody know if the network adapter with k9vgm-v support auto mdi /mdix? otherwise , i might need to get a crossover cable since i only have ordinary ones.Hi there and thanks for posting!
Try this :
Get-WmiObject Win32_NetworkAdapter |
Where { $_.NetEnabled -eq $true } |
Select Name, Index, @{N="TimeOfLastReset";E={[System.Management.ManagementDateTimeConverter]::ToDateTime($_.TimeOfLastReset)}}
Have fun Scripting -
Help! K9VGM-V (MS-7253) with AMD 89 watt 6000+ OR 125 watt 6000+
a related question to an old thread? https://forum-en.msi.com/index.php?topic=119983.msg907875#msg907875
I have K9VGM-V (MS-7253). and have 6000+ 125 AMD CPU I bought at a bargain.
What would happen if the 125 watt 6000+ was installed in stead of the 89 watt version? Would it boot up? Would not boot up? What screen or sounds would you hear? MSI recommends no!
Should I give it a try?
Thank you to all who read this post!
Edit: Edited your link above to the one you should have used.Provided it's recognised by a late enough BIOS yes it will work. But, and this is a big but as Fredrik stated it surely is not recommended as 125W CPU's are not supported on that MB and will eventually fry the CPU voltage regulator MOSFET's. If you insist on using that CPU then find yourself a MB that supports 125W CPU.
Edit: At the very least it will kill the MB you have, worst case scenario is it could be a fire hazard and destroy the entire PC if not more.. -
GT 120 does not support resolution 1440 x 900?
Hi there.
I have a 15" Macbook Pro and wish to use the Apple remote desktop to control my 2009 Mac Pro remotely. However I can't figure out a proper resolution -- 1440x900 in the remote desktop... This resolution is not supported either when I work on the Mac Pro itself.
Suggestions are appreciated.
-oolongHi, SophiaHat and a Warm Welcome to Apple Discussions and the G5 Power Mac forum!
Do you have or are you buying a dual-core G5 with the PCI Express graphics?
http://www.apple.com/powermac/graphics.html
Which display do you have or are getting?
Can you link to the exact card you are thinking about? -
Input signals out of range change settings to 1440x900 - 60Hz
I bought a new HP ENVY, I am now trying to re set up my former HP pavilion ..but I keep getting this message on my monitor"Input Signals out if range. Change settings to 1440x900 - 60Hz". I can not get past this! Help!
What is the exact model of PC you have?
What model is the monitor?
It sounds like the PC is trying to transmit the video at a resolution greater than what the monitor can support.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Maybe you are looking for
-
How can I restore my ringtones files after an iTune software update?
This has really upset me but I can't find anyone to help. If you can, it would be greatly appreciated. I have create a bunch of ringtones and they have been showing up fine on my iTune and synced to my iPhone without any problem. Recently, i have rep
-
How to open a .par file inside NWDS
hi all, please help me out I want to open a .par file inside NWDS and make change the theame. thanks & regards
-
Hello Experts, I have a day name column and 3 measures query count, row count... and the requirement i have is, i need to get the data about the current week it means when i run the report now i should get only Monday of this week and its row count,
-
Error in getting details from Bapi BAPI_ALM_ORDER_GET_DETAIL
Hi, I have created Maintenance order by using the bapi BAPI_ALM_ORDER_MAINTAIN.I have used BAPI_ALM_ORDER_GET_DETAIL to get the created maintenance order details. i have given the Maintenance order no(4000030) as input for this BAPi(BAPI_ALM_ORDER_GE
-
After downloading tv program video from itunes store, the sound plays but the video is distorted. How can I correct problem? Please keep it simple. pc/clone Windows XP