K9VGM-V Problem with RAM mixed mode

Hi,
I am having K9VGM -V motherboard. I was operating it in single mixed mode with a 512 Mb DDR2 533MHz + 1G DDR2 663Mhz, with BIOS version 1.0. I upgraded my CPU to Athlon X2 4000+. For this I had to upgrade my BIOS to version 1.8. After this upgrade I am not able to use both RAM modules simultaneously. Its giving continuous beep sound if I try to start computer when both RAMs are in.
System is working like charm when operating in only one RAM. But I don't want to waste the other RAM module. Can some one please help me, if there is some setting I need to do to use both of my RAMs together.

Don't open new topic for the same subject:
https://forum-en.msi.com/index.php?topic=117891.0

Similar Messages

I am having problems with my burst mode on my iphone 6 plus it is slower than the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

i am having problems with my burst mode on my iphone 6 plus it is slower than the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

Gerald
If you had taken time to read the Terms of Use you agreed on joining this Community today you would have realised that Apple is not here
neither reading nor responding on this User Community
http://www.apple.com/feedback/

Problem With Target Disk Mode

Folowing upgrade of my Mini and Powerbook to Tiger I have a problem with target Disk Mode when I attempt to eject the transfer to disk following transfer of my user file. I get an error message to the effect that files are in use and the disk can not be ejected. I try force quit (finder only is running) usually to no effect. Sometimes attempting to verify disk permissions in disk utility will clear the problem and allow me to eject the disk. One time it took close to an hour attempting to eject the disk. Is there another way?
PB Mac OS X (10.4.3)

I had this problem with external volumes like ZIP discs and also external hard drives. Sometimes it was an app used on one of the external files still being open (eg. Word for a text file) which had to be quitted first. The "trackpad" button equals the mouse button which is on the PowerBook. Repairing the target disk via disk utility might also help.

MSI P6N SLI PLATINIUM problem with ram 800MHz

Hello.
I have problem with ram frequency.
I have MSI P6N SLI PLATINIUM and OCZ 2x2GB 800MHz CL5 but in bios I see that my ram runs in 667 MHz. Because I have 800MHz ram, so it shouldn't be default 800MHz and not 667MHz? What I have to do to show bios that I have 800MHz ram?

Quote from: DaLoona
Oke, but they told me when i bought my new system that XP auto adjusts the speed of the memory.
XP 64 bit can works normally with 4 or more GB they said, just like vista.
Just typing what "the professional's" at the store said.

Problems with RAM upgrade iMac G5 1.8GHz

Stuck - Need Help!
I've previously upgraded up iMac to 2 500Mb RAMs and felt recently that it needed that little bit extra, so I ordered two 1Gb chips from crucial.
Followed instructions to T, but with the two new chips in, the machine won't load.
Interestingly, it boots up with the following RAM combinations
old 500MB + new 1GB (in any combination) - recognised as 1.5GB
one new 1GB RAM (again either one) - recognised as 1GB
I spoke to crucial who said that as the RAMs work individually, there isn't a problem with them, it could be a Firmware issue. I've upgraded all my software, and don't know what to do next?
Anyone overcome a similar problem in the past?
Thanks

I'm experiencing something very similar to shaow. I'll share my experience in gory details - sorry for the long post but I've spent more hours trying to stabilize. I should have worked the hours at walmart and bought a new iMac with the money I could have earned
Anyway, here goes:
Two iMac G5 1.8Ghz 17" (both Fall 2005 model), will call one A and the other B.
Prior to attempting ram upgrade: A, config working fine: both a config using 1GB slot 1, 256MB slot 2 and a single 1 PC3200 1GB stick. OS X 10.4-10.5.7. No problems. I did have the motherboard replaced under warranty after having sleep problems - capacitors were expanded. No problems since that motherboard swap.
Prior to attempting ram upgrade: B, config working fine: 2 x 256MB sticks. OS X 10.3.9
Ordered 3 PC3200 400Mhz 1GB sticks from Data Memory Systems.
Upgraded A: Added 1GB stick = 2GB total
Upgraded B: Removed both 256MB sticks from B and added two 1GB sticks = 2GB total
Booted B, experienced gray screen of death with the multi-language crash message - somethign like: 'Please hold down the power button and restart'. Power cycled B, booted off a retail box DVD of OS X 10.5.6. Began upgrade to 10.5.6. Gray screen of death part way thru upgrade. Power cycled, gray screen of death again during early boot phase.
Decided to run tests on B. I could not locate the Apple Hardware Test (neither on system dvd 1 nor on a separate DVD). I resorted to using TechnoTools Deluxe which was included with AppleCare box. No hardware problems found including on the 2GB memory.
Removed both new 1GB sticks, pulled older working 1GB stick from A and installed into B. Completed upgrade with just 1GB memory on B to 10.5.6 and subsequently pulled down all updates for OS X 10.5.8. Powered down, added second 1GB stick to B, booted into 10.5.8 successfully. Repaired disk permissions, restarted. Began using applications, then after only about 5 minutes experienced gray screen of death. Powered down, removed new 1GB stick, replaced with one of the two remaining new 1GB sticks. Read about reseting PRAM/NVRAM. Followed steps to reset PRAM then decided to do the reset NVRAM within openfirmware. Started back up and logged into 10.5.8. Ran several applications - did not experience gray screen of death after about 20 minutes use. Have not had time for further tests on B yet.
Back to my saga with A (my original iMac G5 that was working fine with 1GB stick on 10.5.7):
Called Data Memory Systems and they sent me a replacement for the 'bad' 1GB stick.
While I was waiting for the new 1GB stick from DMS, I was struggling to get machine fully updated. Software Updater was failing with the weird network error (network was fine) and after following steps to troubleshoot, I backed up the user accounts and decided to reinstall OS X fresh from the 10.5.6 retail box (family license). Finally, I had OS X 10.5.8 all fully updated on the 1GB iMac G5 (A).
New memory arrived, installed 2nd 1GB stick. Booted up, immediately I got the gray screen of death. Restarted, booted up got about 5-15 minutes use then gray screen of death. Puzzled, I called DMS who said unlikely I got 2 bad sticks. They suggested I try memtest. So I did...
So on A, I first ran memtest from single user mode on the 2GB config. It crashed immediately with some 'Unexpected' error. Did not look like a memory error. I powered down, removed 2nd 1GB stick, and ran memtest from single user on the 1GB stick. Ran all tests 3x over a couple hours - no problems found. Retested after swapping the 1GB stick for the other. Both tested fine. Installed both sticks again and ran memtest all tests, one pass (didn't want another 6 hours lost) on the 2GB config, and all tests passed. Booted up and got gray screen of death - I don't recall if it was on bootup or after running but I ran fsck with no disk problems found, then restarted, logged in, ran disk utility to repair all permissions. Some repairs were made. Restarted A, reset PRAM and NVRAM again, booted successfully.
I haven't had much time to run extensively apps on A yet. It's sleeping as I type this on another mac. My next test will be to reset SMU.
I'm starting to wonder if the original iMac G5 has firmware problems that would prevent it from being unstable with two 1GB sticks??? My experience on two identical models of iMac G5 plus reading this post with VERY similar behaviors and after all the normal tests. I've concluded the memory is A-OK and something more sinister is lurking...
Any thoughts are appreciated.

Problem with the shuffle mode in Z V P

Hi everbody,?I have a problem with my Z V Plus and I was?wondering if anyone could help. The problem is that when I listen to a playlist in the shuffle mode and then for any reason switch off the player, when I resume listening the player lose track of all the songs played before and starts the playlist from the beginning (i.e.) it repeats the tracks I've already listened to the last time. What makes the problem worse is that it seems that player gets fond of a certaing group of songs and just keeps playing them over and over again preferring them to other songs in the playlist. It's worth mentioning that I'm using the "shuffle" not the "shuffle repeat" mode and that I've already updated my player with the latest firmware. Also to be specific I've to mention that sometimes I press the "pause" button before switching off the player, other times I don't. Thoughts anyone?

Do you have an Arabic version of Firefox installed which isn't displaying the vowelization correctly, or are you trying to read it using an English language version?
There are a few add-ons for Arabic which might possibly help here: [https://addons.mozilla.org/en-US/firefox/search/?q=arabic&cat=all&x=0&y=0 Arabic add-ons]

Problem with full screen mode in player

hey,
I am having a problem with my Adobe Flash player in internet
explorer. I am using 2 screens on my computer and I am trying to
switch the player to play on the opposite screen when it goes into
full screen mode. It used to do this, but now I cant get it to play
on the right screen. If anyone has a solution to this I would
greatly appreciate it.

Make it into a Projector file then put it through FlashJester
Jugglor
http://www.jugglor.com
Download a FREE evaluation copy and then
Jugglor -> Setup Settings -> Windows Display ->
Multimonitor Support ->
That should do the trick.
PC ONLY
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple

Can anyone help me? Problems with external mixer?

Hey all,
First off i would like to say hey to everyone as i am new so i hope someone out there can help me and me likewise in the future.
Onto my problem. I recently bought an Alesis Multimix 8 USB and i am having a few problems with my iBook recieving the left and right signals from the device. I am currently running it through Ableton Live however when it recognises the mixer it says that there is only one input, the left one.
For the work i am trying to do i would need the left and right inputs to act as seperate channels into Live. When i first bought the mixer it worked fine and Live read 2 inputs easily however now for some reason it has stopped seeing one.
I think it may be a problem with the audio software in OS X 3.9 but i am not sure, i am trying to repair what i can however it seems to me that the only option i may have would be reinstalling 3.9 again from scratch.
If anyone has any ideas about what could be wrong or how to get the 2 inputs back i would be very grateful.
Please help me as this is driving me mad!
Cheers
Jon

Hi Jon and welcome to Apple Discussions.
I cannot pretend that I know anything about your subject but a couple of non invasive things you can try before resorting to a re-install. (Usually a last resort with Macs).
1) Have a look at Audio MIDI setup in your Applications>Utilities folder and see if there is a setting there that with resolve your problem.
2) Create a new user in System Preferences>Accounts.(always a good troubleshooting measure this, whatever the problem). Log out of your own account and into the new. Does the problem persist? If it doesn't there'll probably be a preference file somewhere to do with the device you are using.
If the problem does persist then it could be the unit itself, the lead (have you tried a different one/port?), or - worst case scenario- a hardware/sw problem with your iBook.
Not a lot of constructive help, I'm afraid, but some avenues to explore…
Best of luck,
Adrian

Problems with guided edit mode in PSE 13

I'm having problems with some of the guided modes in PSE 13.
The simple method for changing the the depth of field does put a blur on my photos but the add focus area doesn't work- leaving my photos a blurry mess. The custom mode using the quick selection tool works fine.
The zoom burst behaves in a similar fashion - it gives a zoom burst to the whole photo but trying to add focus doesn't work. I've seen a few other people commenting about this in various forums but haven't seen anyone post a solution.

murieston a écrit:
I'm having problems with some of the guided modes in PSE 13.
The simple method for changing the the depth of field does put a blur on my photos but the add focus area doesn't work- leaving my photos a blurry mess. The custom mode using the quick selection tool works fine.
The zoom burst behaves in a similar fashion - it gives a zoom burst to the whole photo but trying to add focus doesn't work. I've seen a few other people commenting about this in various forums but haven't seen anyone post a solution.
Both effects are based on the same principle: you have a blurred layer copy over the original. The step you are missing is how to use the gradient tool to show or mask the blurred layer. To better understand, switch to 'expert' view and look at your layers panel and especially at the mask in the blurred layer. You'll see that it's much easier and more flexible to do the steps in expert mode.
- 1 - duplicate the layer
- 2 - apply the effect (blur or zoom burst)
- 3 - add a mask to the blurred layer
- 4 - select the mask (Alt click in the mask icon, this makes the blank mask visible in the display area)
- 5 - use the gradient tool (or any other painting tool) to show/reveal what should be blurred or not.
Your problem may be due to the use of the gradient tool. Be sure the default background/colors are set to default (Click D for white on black)

Problem With Compatibility Mode

My laptop runs Windows XP and I tried to change the compatibility settings so it would play a game made for WIndows 95. I went into the properties tab of the install file to make the changes and not only did the game not work but now I can't change the settings back to their original state. I tried to go back to the properties tab but I can no longer see the boxes next to the 256 color option and can't tell if that or the other settings are still checked off. How do I get my display back to Windows XP mode?

I had this problem with external volumes like ZIP discs and also external hard drives. Sometimes it was an app used on one of the external files still being open (eg. Word for a text file) which had to be quitted first. The "trackpad" button equals the mouse button which is on the PowerBook. Repairing the target disk via disk utility might also help.

Problem with its sleep mode...

Whenever it wakes up from sleep mode all the files which where open earlier are closed and not visible on screen? And it also at times it takes time to wake up?.... Please help!

Hi there @Ettu
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having some problems with sleep mode on your notebook. I am happy to help with this.
Please post the full product number for your notebook. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
I think the best bet would be t to take a look through the following. It is possible that somewhere along the line a change was made to your power schemes, or preferences for Sleep Mode. These should help with that.
HP PCs - Troubleshooting sleep and hibernate issues (Windows 7)
HP Notebook PCs - Managing Power Options (Windows 7 and Vista)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Strange problem with RAM!

Is there any problem with the MSI KT3 Ultra 2 supporting the 3 banks with RAM?
I used 256 Mb of crucial RAM for 1 moth but just Purchased another stick of 256 crucial and installed it but the board refuses to work with the two sitks at the same time, it works great with each of them but not with them toghether, what´s wrong?? ?( ?(

Now I don´t know what´s wrong, I have tried every possible combination, but the problem persister and now I´m very disappointed with this board, this is a very strange problem, I tested the memory with memtest 86 and it gives me aleatory errors for exemple gives 6 errors in the first pass then in the second pass is everything ok then gives me one or two in third, other times is everything ok all the away, and I just can test each stick alone if I insert the two stikers the program can´t run.
before all this problems I was able to reach 145 FSB with agressive timings in the memory, now I can´t even reach 133 FSB because it crashs, I can´t blame the PSU because it is an enermax 431, if it wasn´t so i believe the problem was from that but I think this PSU are enough for *1 athlon XP 1900 *1 DVD *1 Plextor CD-RW *1 Maxtor 40 Gb *1 western digital 80 Gb *4 Fans + the heatsink fan.
everything indicates that the problem is from the board, bacause when I use just one stick, it doesn´t matter which one, it works but when I use both toghether it refuses to work properly.
I have now two months with this board and I was happy with it but now I´m ?( X( :( ;(

MSI Z97 Gaming 3 problems with ram

Sorry for my bad english. I have only one bank of ram 4GB Kingston Fury 1866MHz and some problems with it. When it's installed on DIMM1, in UEFI BIOS, in Windows 8.1 Pro x64, aida64, cpuz, ram saw as DIMM3! If it's installed DIMM2 saw as DIMM4, or installed DIMM3 saw as DIMM1! What's that? What kind of problem on my motherboard?
Fresh BIOS version 2.6 installed.

Quote from: rocketpowerik on 06-May-15, 17:20:02
One detail i loose in my spec, PSU: Seasonic SS-750HT(750W).
To your signature.
Quote from: rocketpowerik
And last one if i changed OC ram settings to 2133MHz or 2200, 1.65v., and CL10 Performance preset.
No much difference with stock preset.
You can only compare same software results, each software give slight different results.
Quote from: rocketpowerik
Butt i watched review when my memory with same settings demonstrated 20000MB/s read/write results.
Single channel?
Post a link.

Anyone else having problems with Target display mode on Mavericks?

Hi,
Last week I upgraded my iMac and macmini to Mavericks. I use target display mode to use the iMac display for the macmini.
Since the upgrade I have suffered problems with winow resizing as I swap between computers.
In particular I notice it with the Eclipse IDE window - since I am using the two systems for dual development projects. But I don't believe the problem is limited to Eclipse,
What happens is that when I switch (with fn-f2) the window appears to have disappered, but usually after bringing various apps to the front re-appears as long window with zero height (just the title bar).
Am I alone in this?

No - I'm having issues with my Macbook air -- working with Apple right now to figure it out. will let you know if I figure out a solution.

Upgraded to 3.6.9 and now will not bookmark, automatically reloaded 3.6.2 twice, now on 3.6.10 same problem with bookmarking, safe mode makes no difference

After upgrading to 3.6.9 firfox will not bookmark some pages, once would not load, has twice atomatically re-installed 3.6.2. Upgraded again to 3.6.10 had have same problem with bookmarking

The answer is in the diagnostic! Go to the Toshiba site (I've been so nice and found the link for you!)
http://www.toshiba-europe.com/storage/Index.asp?page=PFT&nav=ISH_ARC&model=SDR22 12
Try updating your drives firmware. Click 'Firware Updates' on the right hand side of this page, then follow the instructions and download the update, then install. See if that helps. Its worth updating the firmware anyway :P

K9VGM-V Problem with RAM mixed mode

Similar Messages

Maybe you are looking for