K9vgm-v realtek mic dont work

hi
please if anyone get this mic funktion to work please tell me what realtek version do you have????
I have try to change the jumper in the manual on jaud1 but it dont work???????? ???

HI
I had to run the Mic test to get it to work.
More detail: I'm running XP Home sp2
Audio Driver Version 5.10.0.5449
Audio Codec ALC883
If your using front panel hook up try this
Realtek HD Audio Manager > Audio I/O > Connection settings > Disable front panel jack detection
then try this if still no Mic
Control Panel > Sound and audio Devices > Voice > TEST Hardware
this worked for me, different board , but realtek sound

Similar Messages

Realtek Mic stopped working Please Help.

I'm on a Toshiba NB205-N325BN, Windows 7 Home Premium, Intel Atom processor N280 o 1.66GHz, 512KB L2 Cache, 667MHz FSB Mobile Intel® 945GSE Express Chipset. Audio Driver is a Realtek High Definition Audio driver version 6.0.1.5904
My internal mic stopped working. I'm not sure how long it hasn't been since I don't use it all the time, but when I went to use skype last night I found that the mic wouldn't work with anything even the sound recorder program in the accessories folder. I've tried uninstalling and reinstalling the driver, but to no success. I figured I give this forum ago to see if any one could help otherwise I'll have to call the Toshiba support line or do a clean install of windows (which I do not want to do at this time.)

I actually got in contact with Realtek's support via e-mail, and they sent me a program to install that will let them check their devices that are on the machine. After I ran the scan this is the conversation that we had:
Realtek: "We found you had plugged a external mic to microphone jack. Have you tried to unplug external mic and then check the built in mic ?"
Me: "I don't own an external mic, but I did plug in my headphones into the mic port by accident recently maybe that was it? I don't have anything plugged in right now and it's not working."
Realtek: "Please try to dump audio info again(run the scan again) during recording interanl mic sound."
After I ran the scan again they sent me these instructions, and I'm kind of confused on what he means (I think the support is in Asia somewhere and they are translating each message at a time.)
Realtek: "We tried to check it with TOSHIBA. Your machine supports audio prower download feature after audio idle status. You can try to turn off this function on the Power Manager Page of Realtek HD Audio Manageer. Or you can try to plug headphone jack to keep audio power up state .
Can anyone help me understand that last part? I went to the Audio Manager and I didn't see a Power Manager page anywhere! Does "Or you can try to plug headphone jack to keep audio power up state." Mean that it might start working if I try to use it with headphones?

Audio and mic dont work.

Hello everyone,
few days ago I instaled the new windows 10 and after that, decided to update and instal new drivers from Hp support webpage. After I installed a couple of drivers and restarted my laptop, the audio wont work, neither the microphone. I downloaded the new "IDT High-Definition (HD) Audio Driver", BIOS, Firmware, etc. Can you help me please?

, hello and thanks for posting on the HP support forums. The only options you have at this point is to roll back the system until there are updates from Microsoft so that all the bugs can be worked out. Any time an OS gets released there is a period of growing pains that we all go through. Until there are full drivers listed on the HP support page for your system and Windows 10, I would stick with what is shown under supported drivers and operating system.
Thanks again for the post and have a great day.

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

Looking at the details for this mic, it appears that the app has to have the option to use the internal specak when a mic is plugged into the headphone jack. Specifically:
NOTE: When MityMic is plugged into your iPod/iPhone you won’t be able to use the onboard speaker for sound output. You must remove the MityMic then play back your recordings. (The Skype app has an option to enable the onboard speaker even when the mic is plugged in, so you could use MityMic for placing Skype calls. However most other apps do not have this function.)
The above is from:
http://touchmic.com/products-page/view-all-products/touchmic-mitymic---voice-rec ording-and-interview-mic/

My sound is fine but my mic isnt working. how do i fix or figure out whats wrong with it

Title says it. I just did a clean wipe on my computer and now my mic isnt working on vent or skype, i dont know what is wrong with it. When i go to my sound hardware it says my external mic, IDT high def audio codec is enabled..

Same thing here. Must be update related. Who knows. Tried to go into ventrilo today and nada. Can hear people fine, microphone not picking. In my devices it says my Anvex Virtual Audio is "not available", same with the "IDT High Definition Audio Codec. Now I'm starting to get a little agitated. No diagnostics have come back with a ping on the issue. All settings seem fine. I HAVE AUDIO, as in my speakers are working so **bleep**.
I'm lost. No clue how to fix it. Guess I'm no longer raiding and that if this isn't working I'm going to go buy a Dell and rage beat this piece of **bleep** in the yard. That's right. I am taking 3 years of continual frustration out with HP errors, Vista complications and overall disatisfaction.
If you can fix this problem I will offer you pictures of fluffy kittens and circus acrobats/contortionists. Now fix my ventrilo. lol

Can't get mic to work on Acer TravelMate P

Hello there Arch forum.
@mod
I'm not sure if this post is best placed in laptop/media or newbie corner, I have used Arch for 2 years now but I'm a noob on pulseaudio.
Feel free to move it to the desired location.
Anyone have any suggestions on how to get my head set microphone to work in mumble on my Acer TravelMate P laptop.
I have tried different things that was suggested on the PulseAuido Troubleshooting page.
But I think its a problem with a hardware button that can mute the microphone located just beneath the screen.
When press the button nothing happens..
Output of some commands.
$ arecord --list-devices
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ pacmd list-sources
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 69160 / 106% / 1.40 dB, front-right: 69160 / 106% / 1.40 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_03.0>
module: 6
properties:
device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb0630000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: front-left: 41353 / 63% / -12.00 dB, front-right: 41353 / 63% / -12.00 dB
balance 0.00
base volume: 5206 / 8% / -66.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC282 Analog"
alsa.id = "ALC282 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC282"
alsa.components = "HDA:10ec0282,1025081e,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-internal-mic>
Thanks in advance

Re: Can't get Mic to work? I'm using the Steelseries Siberias headset, with a standalone Zalman mic. I never unplugged them, I only reformatted from a cracked verion of Windows 7, to a legit version of Windows 7. The versions were actually the exact same, and now I regreat Formatting.
Here are some of My PC's Specs
http://img9.imageshack.us/i/specsq.png/
I'm using the ATI Radeon 4870
Creative XtremeGamer
http://img704.imageshack.us/i/sound.png/
http://img684.imageshack.us/i/drivers.png/
I've just gottren really frusterated. I'm about ready to go back down to XP just to get this to work, I use my microphone for so many different things.
I've searched this problem, it seems there are numerous people with the same problems, and I just find that sad, I've been using creative products for a long time now, and have never had a problem like this before.

Iphone4 - MIC not working only on phone call, But in recording MIC works good

My iPhone4 was working last 10 months till last week. it is bought from outside UAE and am Living in UAE
When I make a call , I can hear them clearly , but other side cant hear me.
I think iphone MIC is broken, but fortunately I tried recording for 10 minutes, it is working perfectly. I felt hardware working properly
Then I think it is software Issuebut,
When I detected the issue software version was 4.3.3, And Then I updated software to 4.3.4. Still the issue remains.
I tried several time restarting. No advantage
After all I deleted all my content by resetting from phone and iTunes, bothways.
Now my phone content looks like new iPhone and software is 4.3.4 and
Still the MIC not working only on a phone call
Unbelievable.
I went to more than 3 apple dealers in Dubai, like istore,protech.. All they refused service for iPhone.
They dont have service for iPhone, but they selling and are autherized reseller,
My phone still under warranty.
Do I get warrenty covering, or atleast it is serviced?
Or could you have any trick to get it worked
Trust you can help me.
Thanks in Advance
Nouf, Dubai

I've been having the exact same problem! I tried restoring, updating, suing earphones but NOTHING.

HS-1200 volume buttons dont work...

I bought HS-1200 headphones and i cant use volume buttons on right side of headset. I installed and uninstalled drivers few times, downloading drivers from creative.com site and it still dont work. I even try dont to install anything but it wasnt help. Im fed up with this problem... Buttons for turning on headset and for starting/ending call work with and without drivers. I dont know where is the problem. I try to install drivers for my sound card (realtek) and it wasnt help too. When im looking in Creative console it seems like the program use my headphones like speakers. I dont have headphones options i saw in FAQ. I want to show you screenshot http://img693.imageshack.us/img693/3676/problem.png I guess that i should have a sign from blue circle instead of symbol from red circle. I selecting my earphones and its still dont change. And i dont know what about sign from green circle. I dont have it - maybe it will solve the problem? I have Win XP Professional SP3. Please help me with this... Sorry for my low english

Hmm... I luckly solved this problem. My headset after about 2 months broke down. It won't play or record anything. It charged for ages and never finish. I send it on guaranty back and get new one. Before i had Win XP and buttons won't work. Before i get new headset i update to Win 7. After pluging them in and install CD all works properly. Maybe they are not compatible with XP... >.<

Boot camp - internal mic not working

I've spent hours reviewing various forums and have tried all suggestions I've found, to no avail. That said, I'll detail my steps here in the hope that someone can help, or that I can help someone else, or at least drive someone else nuts.
This is a 20" iMac (early 2008) running Snow Leopard + Window 7 Professional w/ Boot Camp 3.1 drivers (you know, the ones that fully support Windows 7).
By default (that is, without Boot Camp drivers installed), Windows recognizes a "High Definition Audio Device." Sound doesn't work, but the internal mic does work, as evidenced by the fact that speaking or tapping on the top of the computer results in movement of the green bars that appear in the Recording Devices dialogue.
After installing the Boot Camp drivers (or any more recent version of the Realtek drivers, including 2.41 that became available today), the "High Definition Audio Device" becomes "Realtek High Definition Audio." Sound works (poorly compared to OS X, but **** at least something comes out), but the microphone does not. In the Recording Devices dialogue, speaking, tapping, yelling, and swearing doesn't register per the green bars.
I've reviewed many a post, and have tried the following:
1. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, updated to the Realtek driver by browsing to the files from Device Manager instead of running Setup, reboot. This installs the driver, doesn't install Realtek HD Audio Manager, sound = yes, mic = no. Crap.
2. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, installed the Realtek driver by running Setup, reboot. Sound = yes, mic = no. Crap crap.
3. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, installed the Realtek driver by running Setup as Administrator, reboot. Sound = yes, mic = no. Crap crappity crap.
4. Uninstalled the Realtek driver, leaving only the default Microsoft driver, reboot, installed the Realtek driver by running Setup in Vista compatibility mode, reboot. Sound = yes, mic = no. Crap crappity crap crap.
So I'm certain both the microphone and speaker hardware work. The Microsoft driver gets me mic but no sound, and the Realtek driver gets me sound but no mic.
Any helpful thoughts and comments are MUCH appreciated, and for the love of God if you're going to jump in with "what are you doing running Windows 7 on a Mac anyways" please save it.
Thanks!

I'm having the exact same problem!!! When is apple going to fix the drivers???!!!

Creative Fatal1ty Mic Not Working

Hey guys, Ive just recently bought a new headset (the creative fatal1ty gaming headset) and the speakers work fine, but the microphone just isnt working. It being detected, it just not picking up sound. My sound card is the Creative Sound Blaster X-Fi running on Windows 64-bit. I have all the obvious things done correctly, the mic is plugged into the correct jack, the mic is not muted, the mics sound is at 100, and I have the latest drivers for my sound card. Any one have any suggestions, Ive really run out of ideas after fooling with this for a few hours.

I'm having the same problem , my pc detects the mic but no sound is being emited from it.
I'm using an realtek high definition audio onboard sound card.(other mics have worked fine on this card)
I have the none USB version , and i double checked to make sure the mic is properly
inserted in the headset and PC, (the line on the removeable mic lines up with the groove in the headset)
Can someone from creative please help??\
F it , i'll just get refund from where i bought it...
Message Edited by strongbeer on 04-10-2009 04:00 AM
Message Edited by strongbeer on 04-10-2009 04:18 AM
Message Edited by strongbeer on 04-11-2009 02:14 AM

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

IPhone 2G voice mic not working

Has anyone come across iPhone 2G voice mic not working (not being heard by the other person) but works fine on speaker phone and bluetooth headset. It has been working fine so far and suddenly developed this problem! Any help is highly appreciated….

I had that problem with my iPhone 3G after about 5 days.
I just had Apple take a look at it.
They cleaned it out, called it and stuff.
Didn't work.
Since I didn't drop it in water and it was not my fault in any way, they gave me a brand new one.

Remote and mic not working

I got a earpods with remote and mic for my iPod touch quite while ago,
it stopped working a couple of months ago, how can I fix this!

First see if the earphones/mic/remote work with another device or if a know working one works with your iPod.
If the iPod is the problem:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Fix it yourself
iPod Touch Repair – iFixit

Iphone dont work

my iphone dont work what to do ?
i bought my iphone 5s before 8 months.
i went to idigital store that said me i havent 1 warrenty there .
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks you

snans wrote:
my iphone dont work what to do ? - what doesn't work - maybe add some details
i bought my iphone 5s before 8 months. - where did you buy this phone
i went to idigital store that said me i havent 1 warrenty there . not international warranty only in the country the phone was purchased.
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks you

Speakers dont work

My speakers dont work , headphone jacks do

Try reset SMC
see
http://support.apple.com/kb/ht3964
and Pram
http://support.apple.com/kb/ht1379

K9vgm-v realtek mic dont work

Similar Messages

Maybe you are looking for