K9VGM-V (VIA K8M890) on bord sound problem

I just finished installing my new MB, CPU and Vidio card.... Everything is working perfecktly eksept 1 thing... I cant install the Sound Drivers, it comes up that it failes. Downloaded the newest drivers from MSI but same problem. And to top it all of i cant uninstall it :s

I have now made it work.
I had to reinstall windows XP to make it work. Figuerd out what I did wrong..... co installed it and that it up
Thx for all your replies
PS: will remeber to post specs next time i need help

Similar Messages

K9VGM-V (VIA K8M890) doesn't support 8800GT (PCIE 2.0)

I've heard that some Gigabyte and Asrock motherboards based on the VIA K8M880 chipset doesn't support PCI Express 2.0, even though 2.0 should be backwards compatible with 1.0a motherboards!
Yesterday when I put together my system, with a K9VGM-V (bios ver 1.7) and a Asus 8800GT the computer booted (all the way into Windows) with no signal from the video card. the fan was spinning at 100%, the exact same symptoms of the PCI2.0 problem. It worked fine with the onboard card.
Even after cleared CMOS, disabled onboard vga and a lot of different troubleshooting and BIOS settings, I gave up.
Could it be that the VIA K8M890 also suffers from the same problems as the K8M880 boards, no compatibility with any PCIE 2.0 cards? If so, why isn't it mentioned anywhere?
As far as I know the only solution is to flash the graphics card bios with a PCIE GEN1 bios. Luckily ASUS supplies their own BIOS, so I don't have to use another brand's bios. Does anyone know if I'm on the right track here, or if the card should work without a flash?
and maybe MSI is planning a BIOS update for this motherboard to support this card? I'm guessing the next batch of 8800GTS's also won't work, as those are PCIE2.0 as well!
edited to comply with the Moan Guide:
# AMD Athlon64 x2 5600+ 2.8GHz Windsor
# MSI K9VGM-V Socket AM2 BIOS Ver 1.7
# Corsair XMS2-5400C4 2x1GB DDR2
# ASUS EN8800GT 512MB PCI Express 2.0 x16
# Maxtor DiamondMax8 80GB
Samsung Spinpoint 160GB
# Creative Soundblaster Audigy4
# Microsoft WindowsXP SP2
# Hiper Type-M 580W (Crossfire Rated for two Radeon X1950)
+12V 1 ---------- 20A
+12V 2 ---------- 18A
edit: I have now flashed my Asus 8800GT 512Mb with Asus' own GEN1 BIOS and I can confirm that IT DOES WORK!

Quote
Could it be that the VIA K8M890 also suffers from the same problems as the K8M880 boards, no compatibility with any PCIE 2.0 cards? If so, why isn't it mentioned anywhere?
That seems pretty obvious, don't you think? It is a chipset limitation. You will have to contact Asus about getting a suitable bios for that card. Like Aaron Yuri already said: the chipset cannot be changed.

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

VIA MSI KT880 Delta series - sound problem

In winxp all is fine. But when i'm starting a game like CS 1.6 something happens. I can hear some noise (silent cracks) and the game sounds have a cybernetic aftersound. After a few minutes sound totaly downs and only system restarts helps :/

I see you don't have too much hard ware that could go wrong. It used to be important to have a sound cable attached between the CD and the sound card. This shouldn't be necessary, remove it if you got it. I don't know your games, so I don't know if you use a CD, or if you play on the Internet.
Apart from this, sound problems mostly have to do with Windows.
Off: Aha, Osnavi, you thought I'd say SoundBlaster! Other problems, maybe, but I can't complain about the sound quality.

I have sound problem in My Cq40-144TU Laptop

Hi,
I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing.
But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
Please help me sir

What sound problem - no sound on anything, no sound on some apps ?
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
And for future info typing in all capitals is considered to be SHOUTING

Sound problems after using car stereo

Hi there, Z1 was working fine until I started using cable to connect to car stereo for music. Have done factory reset but problem of only taking call via loudspeaker and no sound in music player still there
Solved!
Go to Solution.

Hi UNOHOO,
Discussion Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines
Are you getting audio when a headset is plugged in to the handset?
And is it still possible to get audio when using the Car Stereo cable.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Imac sound problem

Approx 6 months ago started having sound issues with imac which is set up as a media center. The imac output is connected to an AV receiver via optic cable. The problem is no sound on imac programs safari, itunes etc when starting from sleep if a program is left open prior to going to sleep. Movies have picture but no sound, itunes has no sound and does not start playing the song. Quit open programs and restart computer or put to sleep and wake the sound is restored. Eye tv sound is not affected. If programs except eye tv are quit prior to going to sleep there are no issues on start up. Disconnect the AV receiver and the problem still exists?????????????

Thanks for the info, below are the results.
Started computer from sleep no sound on system. Checked Audio Midi System as suggested Audio Default and System set to Unknown Device. Reset both to Built in Output and checked sound still no go. Force quit itunes and put to sleep and reactivate sound all good Audio Default and System remained in Built in Output. Watched recording through Eye TV for about an hour then checked sound through itunes, no go. The Audio Default and System had both reverted to Unknown Device yet the Eye TV sound was not affected???????
Quit all programs last night except Eye TV and let mac go to sleep. Checked this morning sound is fine. It appears that when itunes, safari etc is open and not use for a period the Audio Default and System reverts Built in Output to Unknown Device.
BDAqua it looks like your longshot has identified where the issue is occuring and thank you. The next stage is determining why and how to fix the issue................appreciate you comments.
Cheers

Massive sound problems in Yosemite

Hi,
I have been experiencing massive sound problems with Yosemite. It basically effects everything except the sound control in the control centre.
What happens:
I can't control the sound volume anymore. Key board sound control does not respond (sound symbol is struck out), sound bar in menu bar in greyed out.
If sound symbols are not greyed out, the sound will stay on the level it currently is. Neither key board nor menu bar icon can change the volume.
When it happens:
When I plug/un-plug headphones.
When I use iTunes. iTunes will even stop playback... the only chance to get iTunes back to normal is restarting the app.
When I use Skype.
Occasionally on any incident... there is no app in particular linked to this.
What I do to get around it:
Restarting the mac... this will help until I sent my Mac to sleep or do any of the things above.
Accessing sound control via the control centre (which is work around, yet very annoying).
Killing sound via terminal does not do anything.
Btw. there is only one thing listed in the sound input/output menu.
This problem is very annoying and occurs several times daily, especially since I work a lot with sound and music. I know this an weary argument, but considering what I paid for this machine ... bla bla bla... I need a fix.
Thanks for any advice.
Andy

Hi,
Thanks for your reply.
Yes, I have. It works pretty much like any re-start does. As soon I use headphones or send my Mac to sleep, it goes back to unresponsive sound control.
Edit: Just tried it again and it didn't do anything. Key board sound control is still greyed out...
Any other suggestions?

Sound problems with CNBC and E4 with TV @nywhere Master

Got the TV @nywhere Master card, had no problems with tuning in the cable stations picked up all the channels, but E4 and CNBC have no sound just a anoying clicking sound. Have updated the drivers and software, tried the card with Windows 2000 SP4, and XP pro SP1, tried both internal & external audio connections, nothing makes a difference. Anyone got any idea's?

I bought and installed a TV@nywhere Master yesterday (18June03) and no sound problems at all. The Radio volume control definitely controls the line in volume, but check that the mixer Volume Control is not being muted. My Sound in via on-board sound 6 channel Realtek ACL650.
I have been generally very pleased with the results but have yet to get the remote to do anything, I have WinXP SP1 with all updates installed. Not sure if it is my System set-up or faulty remote but it a minor concern for me.
I would suggest that you take a look at VirtualVCR (freeware) for your capturing if you want more that Mpeg files. It works very well for me and allows me to capture using the frame size and codec of my choosing

Sound Problems Windows Xp

I am running windows xp sp2 on my aluminum MacBook via Bootcamp. The sound does not work on windows. I tried reinstalling the drivers, but no luck. I went to realteks website and installed the latest drivers. No luck. Now, this is the weird part. I put in my Leapord CD that has the windows drivers. I explored it, and found the realtek driver. I installed it, and the sound started to work. But then, i restarted my computer, and it stopped working. And yes, i have gone into the device manager thing and looked for the PCI thing or whatever with the exclamation mark, and its not there. Please, I need my sound back.
- Jasonlucky
Message was edited by: Jasonlucky
null

This is not incredibly helpful, except for camaraderie...
I had the same problem the entire time I used Boot Camp, tried my butt off, read the forums and everything else, and never found an answer - the only way I could get sound in XP was to use the headphones...never through the external speakers. Weird.

Sound problems - MSI Motherboard and drivers

message:-
I have an Evesham Microcomputer and am having difficulty with the sound - distorted and sometimes slow. I decided to use Live update to ensure I have the most upto date drivers for the sound card and chip set, both VIA.
Unfortunately I am having a trouble down loading these update and installing. All I get after a few minutes of the download screen is error code 997. Any ideas about the down load or sound problem? System info below.
regards
Nick
Motherboard MS-6340 ATX
VIA KT133A (VT8363A 552BGA & VT82C686B 352 BGA)
Audio Direct Sound AC97 Audio
Live update version 3.55
Chip set 4.37
Audio set version 6.14.1.3880
****************System Information****************
Motherboard MS-6340 ATX
VIA KT133A (VT8363A 552BGA & VT82C686B 352 BGA)
Audio Direct Sound AC97 Audio
Live update version 3.55
Chip set 4.37
Audio set version 6.14.1.3880
[MSI_Info]
OS Version: WinXP
LUS Version: 3.55.000
Language: 2057
MB Model Name: MS-6340
MB BIOS Vendor: Award
MB BIOS Version: 6.10
[OS]
Name: Microsoft Windows XP Home Edition|C:\WINDOWS|\Device\Harddisk0\Partition1
Manufacturer: Microsoft Corporation
Version: 5.1.2600
CSD Version: Service Pack 2
Windows Directory: C:\WINDOWS
Boot Device: \Device\HarddiskVolume1
Total Virtual Memory: 2048 MB
Free Virtual Memory: 2009 MB
Total Visible Memory: 256 MB
Free Physical Memory: 47 MB
Serial Number: 55277-OEM-0041603-32617
Install Date: 09/16/2005
Current Time Zone: Paris , Belgrade , West Central Africa
Locale: 0809
State: OK
[System]
User Name: NICHOLAS-STUDY
Description: AT/AT COMPATIBLE
Model: MS-6340
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Number Of Processors: 1
Total Physical Memory: 256 MB
System Type: X86-based PC
System Wake Up Type: LAN Remote
Power Supply State: 2
Power Manage. Support: null
Bootup State: Normal boot
[BIOS]
Name: Award Modular BIOS v6.00PG
Manufacturer: Award Software International, Inc.
Version: VIA694 - 42302e31
Serial Number:
Release Date: 12/18/2001
Target Operat System: Unknown
Language: n|US|iso8859-1
State: OK
[CPU]
Name: AMD Duron(tm) processor
Description: x86 Family 6 Model 7 Stepping 1
Manufacturer: AuthenticAMD
Processor Type: Central Processor
Version: Model 7, Stepping 1
Data Width: 32 Bits
Socket Designation: Slot A
Processor Id: 0383FBFF00000671
Processor Family: Power PC 604
Processor Stepping: 1
Max Clock Speed: 1202 MHz
Current Clock Speed: 1202 MHz
Current Voltage: 3.3 V
External Clock: 100 MHz
L2 Cache Size: 64 Kb
Availability: Running/Full Power
Power Manage. Support: false
State: OK
[Memory]
Name: Physical Memory
Memory Device Locator: BANK_0
Memory Bank Label: Bank0/1
Memory Capacity: 128 MB
Memory Total Width: null Bits
Memory Data Width: null Bits
Memory Type: Unknown
Name: Physical Memory
Memory Device Locator: BANK_1
Memory Bank Label: Bank2/3
Memory Capacity: 128 MB
Memory Total Width: null Bits
Memory Data Width: null Bits
Memory Type: Unknown
[Mainboard]
Name: Base Board
Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD
Product Name: MS-6340(VT8363)
Version:
Serial Number:
[Sound Device]
Name: VIA AC'97 Audio Controller (WDM)
Manufacturer: VIA Technologies, Inc.
Product Name: VIA AC'97 Audio Controller (WDM)
Availability: undefined
Power Manage. Support: false
State: OK
[Network Adapter]
Name: RAS Async Adapter
Manufacturer: null
Product Name: RAS Async Adapter
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (L2TP)
Manufacturer: Microsoft
Product Name: WAN Miniport (L2TP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (PPTP)
Manufacturer: Microsoft
Product Name: WAN Miniport (PPTP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (PPPOE)
Manufacturer: Microsoft
Product Name: WAN Miniport (PPPOE)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: Direct Parallel
Manufacturer: Microsoft
Product Name: Direct Parallel
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (IP)
Manufacturer: Microsoft
Product Name: WAN Miniport (IP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: WAN Miniport (IP)
Manufacturer: Microsoft
Product Name: WAN Miniport (IP)
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: Packet Scheduler Miniport
Manufacturer: Microsoft
Product Name: Packet Scheduler Miniport
Availability: Running/Full Power
Power Manage. Support: false
State: null
Name: BT Voyager 105 ADSL Modem
Manufacturer: BT
Product Name: BT Voyager 105 ADSL Modem
Availability: Running/Full Power
Power Manage. Support: false
State: null
[Video Controller]
Name: RADEON 7500
Current Refresh Rate: 75 Hz
Installed Drivers: ati2dvag.dll
Driver Version: 6.13.3276
Inf File name: oem1.inf
Availability: Running/Full Power
Monochrome: false
State: OK
[Video Configuration]
CheckBtn=ON

Well it looks like your board is an OEM board, which MSI doesn't officially support. But these drivers should work.
Chipset Drivers
Audio Drivers
Good Luck
Jeremy

HOW DO I FIX SOUND PROBLEMS ON MY IPOD TOUCH?

How do i fix sound problems on my ipod touch?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Output Sound Problem

Has anyone noticed that output sound on the itunes is distorted and after opening and playing the same file in QuickTime that the problem is gone?
I am using iTunes to open and play a sound file, say an imported CD song, and the sound is distorted.
Checking the preferences option to perform a Sound Check helps but does not completely solve the problem. After opening Quicktime and opening the same file, the output sound is fine, in both applications?
It seems that all was well before my update of the applications and the Firmware. Should I be suspicious of that as the culprit or is this some other symtom of impending doom?
The sound problem is on internal speakers, earbuds, or a set of sennheiser headphones.
itunes 7.0 updated a few days ago
QuickTime 7.1.3 updated recently
SMC Firmware update a few days ago
White MacBook 2Gz Mac OS X (10.4.7) First Mac

I might have the same problem. Playing audio occasionally becomes very scratchy, to the point that I have to stop listening. It usually lasts a few minutes. It's maddening.
It happens via the internal speakers or through headphones.
Occurrence isn't very consistent. I notice it most in iTunes (v7), but that's probably only because I play most audio in iTunes. I've had it happen now when playing video in VLC, too. It seems to only happen after playing audio continuously for at least 10 minutes. I haven't been able to reproduce it at will, so I haven't bothered taking it to my local Genius bar yet (at least not for this problem).
MacBook Mac OS X (10.4.8)

Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
I thought that was odd...but then the problems really started.....
After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
(and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

My original apple id is not an email address . I bought iCloud memory via that same account no problem. When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address . Made new account but can you change originalI'

My original apple id is not an email address .
I bought iCloud memory via that same account no problem.
When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address .
Made new account as per instruction ie [email protected] works fine
BUT as I want to utilise the money spent on the additional memory it would be great to use the initial account set up as my primary HOWEVER as far as I have tried the initial apple ID CANNOT be changed. Bit confused actually any usefull guidance will be greatly appreciated. Thanks

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
lmerchant wrote:
My new phone has an old apple ID associated with iCloud only. I cannot delete the account as it has "Find my iPhone" turned on.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

K9VGM-V (VIA K8M890) on bord sound problem

Similar Messages

Maybe you are looking for