KA780G integrated gfx + PCI-E card

Hiya folks...
Does anyone know if it possible to use both the mainboards "onboard" gfx (vga, dvi or hdmi) AND a PCI-E gfx card at the same time?
Need to connect 3 monitors.... 2 are working now.
Mainboard: MSi KA780G (vga, dvi or hdmi)
Gfx: ATi Radeon HD 4800 Series (2 x DVi)
Thx in advance!

Yes, it is possible using hybrid crossfire. Have a look right here: http://ati.amd.com/technology/hybridgraphics/index.html

Similar Messages

Why can I not find the primary video setting in Bios so I can change it from integrated to PCIE?

I have purchased a new video card to add to my computer which has integrated graphics. When I installed the card I got a blank screen so I removed the card and restarted the computer and entered BIOS in an attempt to change it from integrated to PCIE the problem is I cannot find the option to make the change. I can select advanced chipset but there is no primary video option to select and as far as I can tell there is no option to switch it from integrated to PCIE.... I researched this heavily and am now resorting to this as I cannot find a way to get the video card to work. I have posted the options I have in my system's Bios below. Thnks for looking BIOS Version 2.14.1219Options:Main Advanced Power Security Boot Options Exit Main:System infoDateTimeAdvancedMiscellaneous AHCI Post 1 Not Present AHCI Post 2 Not Present AHCI Post 3 Not Present AHCI Post 4 HL-DT-ST- DVDRAM GH7ON AHCI Post 5 Not PresentAdvanced Chipset Configuration Intel EIST [Enabled] Intel Turbo Boost [Enabled] Intel AES-NI [Disabled] Intel XD BIT [Enabled] DVMT Mode [DVMT] DVMT Memory Size [256mb]Integrated Peripherals Onboard SATA Controller [Enabled] Onboard USB Controller [AHCI] Legacy USB Support [Enabled] USB Storage Emulation [Auto] Onboard Audio Controller [Enabled] Onboard LAN Controller [Enabled] Onboard LAN Option ROM [Disabled]PC Health Status {Health Status info}Smart Fan [Enabled]PowerACPI Suspend Mode [3(STR)]Deep Power Off ModePower On By RTC AlarmPower on by PCIE AlarmPower on by Onboard LANWake up by PS2 Keyboard/MouseWake up by USB Keyboard/MouseRestore on AC Power LossSecuritySupervisor passwordUsername PasswordChange Supervisor PasswordBoot Options1st Boot Device2nd Boot Device3rd Boot Device4th Boot Device5th Boot DeviceEFI Device PriorityHard Disk Drive PriorityOptical Disk Drive PriorityRemovable Device PriorityNetwork Device PriorityQuiet Boot OnHalt OnExit

iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

[SOLVED] kernel crash with PCI wifi card

HI,
I id install and start to use arch just two weeks ago :-)
I was able to solve problems until now.
I am not sure if this is problem of arch kernel, maybe it will be general.
I did insert PCI wifi card to my PC with arch. Card is Z-COM XI-626 : LAST LINE:
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
03:00.0 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
06:00.0 PCI bridge: ASMedia Technology Inc. ASM108x PCIe to PCI Bridge Controller (rev 01)
07:00.0 Network controller: Intersil Corporation ISL3874 [Prism 2.5]/ISL3872 [Prism 3] (rev 01)
It start to work very nicely, I could connect to the network with NetworkManager in gnome.
BUT
after while connection is not working.
the is in message LOG:
Dec 6 07:53:09 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Dec 6 07:53:09 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Dec 6 07:53:09 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Dec 6 07:53:10 localhost NetworkManager[686]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Dec 6 07:53:10 localhost NetworkManager[686]: <info> Policy set 'Auto moje_wifi' (wlan0) as default for IPv4 routing and DNS.
Dec 6 07:53:10 localhost NetworkManager[686]: <info> Activation (wlan0) successful, device activated.
Dec 6 07:53:10 localhost NetworkManager[686]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Dec 6 07:53:10 localhost dbus[661]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Dec 6 07:53:10 localhost dbus[661]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Dec 6 08:02:58 localhost kernel: [ 1889.872241] Pid: 0, comm: swapper Tainted: G C 3.1.4-1-ARCH #1
Dec 6 08:02:58 localhost kernel: [ 1889.872243] Call Trace:
Dec 6 08:02:58 localhost kernel: [ 1889.872244] <IRQ> [<ffffffff810c6cfd>] __report_bad_irq+0x3d/0xe0
Dec 6 08:02:58 localhost kernel: [ 1889.872252] [<ffffffff810c713d>] note_interrupt+0x14d/0x210
Dec 6 08:02:58 localhost kernel: [ 1889.872255] [<ffffffff810c5079>] handle_irq_event_percpu+0xc9/0x2a0
Dec 6 08:02:58 localhost kernel: [ 1889.872257] [<ffffffff810c5298>] handle_irq_event+0x48/0x70
Dec 6 08:02:58 localhost kernel: [ 1889.872259] [<ffffffff810c7a7a>] handle_fasteoi_irq+0x5a/0xe0
Dec 6 08:02:58 localhost kernel: [ 1889.872262] [<ffffffff81016992>] handle_irq+0x22/0x40
Dec 6 08:02:58 localhost kernel: [ 1889.872265] [<ffffffff8140d01a>] do_IRQ+0x5a/0xe0
Dec 6 08:02:58 localhost kernel: [ 1889.872268] [<ffffffff81409c6e>] common_interrupt+0x6e/0x6e
Dec 6 08:02:58 localhost kernel: [ 1889.872269] <EOI> [<ffffffff8131d3aa>] ? poll_idle+0x3a/0x80
Dec 6 08:02:58 localhost kernel: [ 1889.872273] [<ffffffff8131d383>] ? poll_idle+0x13/0x80
Dec 6 08:02:58 localhost kernel: [ 1889.872275] [<ffffffff8131d756>] cpuidle_idle_call+0xc6/0x350
Dec 6 08:02:58 localhost kernel: [ 1889.872277] [<ffffffff81013229>] cpu_idle+0xc9/0x120
Dec 6 08:02:58 localhost kernel: [ 1889.872280] [<ffffffff813e6912>] rest_init+0x96/0xa4
Dec 6 08:02:58 localhost kernel: [ 1889.872282] [<ffffffff8194fc15>] start_kernel+0x3bf/0x3cc
Dec 6 08:02:58 localhost kernel: [ 1889.872285] [<ffffffff8194f347>] x86_64_start_reservations+0x132/0x136
Dec 6 08:02:58 localhost kernel: [ 1889.872287] [<ffffffff8194f140>] ? early_idt_handlers+0x140/0x140
Dec 6 08:02:58 localhost kernel: [ 1889.872289] [<ffffffff8194f44d>] x86_64_start_kernel+0x102/0x111
Dec 6 08:03:05 localhost NetworkManager[686]: <info> (wlan0): roamed from BSSID 00:19:0A:01:1A:66 (moje_wifi) to (none) ((none))
Dec 6 08:03:05 localhost kernel: [ 1896.943757] wlan0: interrupt delivery does not seem to work
Dec 6 08:03:07 localhost kernel: [ 1898.942477] wlan0: interrupt delivery does not seem to work
Dec 6 08:03:10 localhost kernel: [ 1902.180399] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:12 localhost kernel: [ 1904.179118] wlan0: interrupt delivery does not seem to work
Dec 6 08:03:14 localhost kernel: [ 1906.177838] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:16 localhost kernel: [ 1908.176557] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:18 localhost kernel: [ 1910.175277] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:20 localhost kernel: [ 1912.173997] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:22 localhost kernel: [ 1914.172716] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:24 localhost kernel: [ 1916.171436] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:26 localhost kernel: [ 1918.170157] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:28 localhost kernel: [ 1920.168875] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:30 localhost kernel: [ 1922.167595] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:32 localhost kernel: [ 1924.166315] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:32 localhost kernel: [ 1924.279547] ------------[ cut here ]------------
Dec 6 08:03:32 localhost kernel: [ 1924.279553] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x257/0x260()
Dec 6 08:03:32 localhost kernel: [ 1924.279555] Hardware name: System Product Name
Dec 6 08:03:32 localhost kernel: [ 1924.279556] NETDEV WATCHDOG: wifi0 (hostap_pci): transmit queue 0 timed out
Dec 6 08:03:32 localhost kernel: [ 1924.279558] Modules linked in: fuse ext2 mbcache snd_hda_codec_hdmi orinoco_pci orinoco cfg80211 snd_hda_codec_realtek i915 drm_kms_helper drm i2c_i801 hostap_pci hostap i2c_algo_bit i2c_core eeepc_wmi asus_wmi sparse_keymap rfkill psmouse pci_hotplug serio_raw snd_hda_intel mei(C) snd_hda_codec iTCO_wdt iTCO_vendor_support snd_hwdep snd_pcm snd_timer snd evdev r8169 mii pcspkr intel_agp intel_gtt button video lib80211 wmi processor soundcore snd_page_alloc btrfs zlib_deflate crc32c libcrc32c hid_a4tech usbhid hid sd_mod ahci pata_acpi libahci pata_via libata xhci_hcd ehci_hcd scsi_mod usbcore
Dec 6 08:03:32 localhost kernel: [ 1924.279599] Pid: 0, comm: swapper Tainted: G C 3.1.4-1-ARCH #1
Dec 6 08:03:32 localhost kernel: [ 1924.279600] Call Trace:
Dec 6 08:03:32 localhost kernel: [ 1924.279602] <IRQ> [<ffffffff81061b9f>] warn_slowpath_common+0x7f/0xc0
Dec 6 08:03:32 localhost kernel: [ 1924.279610] [<ffffffff81025047>] ? intel_pmu_enable_all+0xa7/0x110
Dec 6 08:03:32 localhost kernel: [ 1924.279612] [<ffffffff81061c96>] warn_slowpath_fmt+0x46/0x50
Dec 6 08:03:32 localhost kernel: [ 1924.279615] [<ffffffff8107e472>] ? __queue_work+0xe2/0x490
Dec 6 08:03:32 localhost kernel: [ 1924.279617] [<ffffffff81364377>] dev_watchdog+0x257/0x260
Dec 6 08:03:32 localhost kernel: [ 1924.279620] [<ffffffff81071e61>] run_timer_softirq+0x131/0x440
Dec 6 08:03:32 localhost kernel: [ 1924.279622] [<ffffffff81364120>] ? qdisc_reset+0x50/0x50
Dec 6 08:03:32 localhost kernel: [ 1924.279624] [<ffffffff8101c139>] ? read_tsc+0x9/0x20
Dec 6 08:03:32 localhost kernel: [ 1924.279626] [<ffffffff810691c0>] __do_softirq+0xb0/0x270
Dec 6 08:03:32 localhost kernel: [ 1924.279629] [<ffffffff81096158>] ? tick_dev_program_event+0x48/0x110
Dec 6 08:03:32 localhost kernel: [ 1924.279631] [<ffffffff8109623f>] ? tick_program_event+0x1f/0x30
Dec 6 08:03:32 localhost kernel: [ 1924.279634] [<ffffffff8140c76c>] call_softirq+0x1c/0x30
Dec 6 08:03:32 localhost kernel: [ 1924.279637] [<ffffffff81016a15>] do_softirq+0x65/0xa0
Dec 6 08:03:32 localhost kernel: [ 1924.279639] [<ffffffff810696ce>] irq_exit+0x9e/0xc0
Dec 6 08:03:32 localhost kernel: [ 1924.279641] [<ffffffff8140d10e>] smp_apic_timer_interrupt+0x6e/0x99
Dec 6 08:03:32 localhost kernel: [ 1924.279643] [<ffffffff8140afde>] apic_timer_interrupt+0x6e/0x80
Dec 6 08:03:32 localhost kernel: [ 1924.279644] <EOI> [<ffffffff81279e9b>] ? intel_idle+0xcb/0x120
Dec 6 08:03:32 localhost kernel: [ 1924.279649] [<ffffffff81279e7d>] ? intel_idle+0xad/0x120
Dec 6 08:03:32 localhost kernel: [ 1924.279651] [<ffffffff8131d756>] cpuidle_idle_call+0xc6/0x350
Dec 6 08:03:32 localhost kernel: [ 1924.279654] [<ffffffff81013229>] cpu_idle+0xc9/0x120
Dec 6 08:03:32 localhost kernel: [ 1924.279657] [<ffffffff813e6912>] rest_init+0x96/0xa4
Dec 6 08:03:32 localhost kernel: [ 1924.279659] [<ffffffff8194fc15>] start_kernel+0x3bf/0x3cc
Dec 6 08:03:32 localhost kernel: [ 1924.279662] [<ffffffff8194f347>] x86_64_start_reservations+0x132/0x136
Dec 6 08:03:32 localhost kernel: [ 1924.279664] [<ffffffff8194f140>] ? early_idt_handlers+0x140/0x140
Dec 6 08:03:32 localhost kernel: [ 1924.279666] [<ffffffff8194f44d>] x86_64_start_kernel+0x102/0x111
Dec 6 08:03:32 localhost kernel: [ 1924.279668] ---[ end trace 6f3b132eb24e1d2e ]---
Dec 6 08:03:32 localhost kernel: [ 1924.279669] wifi0 Tx timed out! Resetting card
Dec 6 08:03:32 localhost kernel: [ 1924.279694] hostap_pci: wifi0: resetting card
Dec 6 08:03:34 localhost kernel: [ 1926.278267] wifi0 Tx timed out! Resetting card
Dec 6 08:03:36 localhost kernel: [ 1928.163754] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:36 localhost kernel: [ 1928.276987] wifi0 Tx timed out! Resetting card
Dec 6 08:03:38 localhost kernel: [ 1930.162473] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:38 localhost kernel: [ 1930.222552] hostap_pci: wifi0: already resetting card - ignoring reset request
Dec 6 08:03:38 localhost kernel: [ 1930.262615] hostap_pci: wifi0: already resetting card - ignoring reset request
Dec 6 08:03:38 localhost kernel: [ 1930.262619] wifi0: Port type setting to 1 failed
Dec 6 08:03:38 localhost kernel: [ 1930.275703] wifi0 Tx timed out! Resetting card
Dec 6 08:03:40 localhost kernel: [ 1932.261129] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:40 localhost kernel: [ 1932.261131] wifi0: MAC port 0 enabling failed
Dec 6 08:03:40 localhost kernel: [ 1932.261150] hostap_pci: wifi0: resetting card
Dec 6 08:03:43 localhost kernel: [ 1934.463052] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:43 localhost kernel: [ 1934.463064] hostap_pci: wifi0: already resetting card - ignoring reset request
Dec 6 08:03:45 localhost kernel: [ 1936.461771] wifi0: interrupt delivery does not seem to work
Dec 6 08:03:45 localhost kernel: [ 1936.501864] hostap_pci: wifi0: already resetting card - ignoring reset request
Dec 6 08:03:45 localhost kernel: [ 1936.501866] wifi0: Port type setting to 1 failed
Dec 6 08:03:45 localhost kernel: [ 1936.521925] wifi0: MAC port 0 enabling failed
Dec 6 08:04:13 localhost kernel: [ 1964.923031] hostap_pci: wlan0: resetting card
Dec 6 08:04:15 localhost kernel: [ 1967.125469] wlan0: interrupt delivery does not seem to work
Dec 6 08:04:15 localhost kernel: [ 1967.125474] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:04:17 localhost kernel: [ 1969.124179] wifi0: interrupt delivery does not seem to work
Dec 6 08:04:17 localhost kernel: [ 1969.164257] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:04:17 localhost kernel: [ 1969.164259] wlan0: Port type setting to 1 failed
Dec 6 08:04:17 localhost kernel: [ 1969.184273] wlan0: MAC port 0 enabling failed
Dec 6 08:06:13 localhost kernel: [ 2084.846529] hostap_pci: wlan0: resetting card
Dec 6 08:06:15 localhost kernel: [ 2087.048638] wlan0: interrupt delivery does not seem to work
Dec 6 08:06:15 localhost kernel: [ 2087.048649] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:06:17 localhost kernel: [ 2089.047356] wifi0: interrupt delivery does not seem to work
Dec 6 08:06:17 localhost kernel: [ 2089.087406] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:06:17 localhost kernel: [ 2089.087407] wlan0: Port type setting to 1 failed
Dec 6 08:06:17 localhost kernel: [ 2089.107404] wlan0: MAC port 0 enabling failed
Dec 6 08:08:13 localhost kernel: [ 2204.769302] hostap_pci: wlan0: resetting card
Dec 6 08:08:15 localhost kernel: [ 2206.971827] wlan0: interrupt delivery does not seem to work
Dec 6 08:08:15 localhost kernel: [ 2206.971832] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:08:17 localhost kernel: [ 2208.970532] wifi0: interrupt delivery does not seem to work
Dec 6 08:08:17 localhost kernel: [ 2209.010630] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:08:17 localhost kernel: [ 2209.010634] wlan0: Port type setting to 1 failed
Dec 6 08:08:19 localhost kernel: [ 2211.009274] wlan0: interrupt delivery does not seem to work
Dec 6 08:08:19 localhost kernel: [ 2211.009275] wlan0: MAC port 0 enabling failed
Dec 6 08:10:13 localhost kernel: [ 2324.691574] hostap_pci: wlan0: resetting card
Dec 6 08:10:15 localhost kernel: [ 2326.891711] wlan0: interrupt delivery does not seem to work
Dec 6 08:10:15 localhost kernel: [ 2326.891716] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:10:17 localhost kernel: [ 2328.890393] wifi0: interrupt delivery does not seem to work
Dec 6 08:10:17 localhost kernel: [ 2328.930472] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:10:17 localhost kernel: [ 2328.930473] wlan0: Port type setting to 1 failed
Dec 6 08:10:17 localhost kernel: [ 2328.950482] wlan0: MAC port 0 enabling failed
Dec 6 08:12:13 localhost kernel: [ 2444.616669] hostap_pci: wlan0: resetting card
Dec 6 08:12:15 localhost kernel: [ 2446.818212] wlan0: interrupt delivery does not seem to work
Dec 6 08:12:15 localhost kernel: [ 2446.818218] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:12:17 localhost kernel: [ 2448.816887] wifi0: interrupt delivery does not seem to work
Dec 6 08:12:17 localhost kernel: [ 2448.856917] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:12:17 localhost kernel: [ 2448.856919] wlan0: Port type setting to 1 failed
Dec 6 08:12:17 localhost kernel: [ 2448.876938] wlan0: MAC port 0 enabling failed
Dec 6 08:14:13 localhost kernel: [ 2564.540113] hostap_pci: wlan0: resetting card
Dec 6 08:14:15 localhost kernel: [ 2566.741388] wlan0: interrupt delivery does not seem to work
Dec 6 08:14:15 localhost kernel: [ 2566.741394] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:14:17 localhost kernel: [ 2568.740062] wifi0: interrupt delivery does not seem to work
Dec 6 08:14:17 localhost kernel: [ 2568.780120] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:14:17 localhost kernel: [ 2568.780121] wlan0: Port type setting to 1 failed
Dec 6 08:14:17 localhost kernel: [ 2568.800135] wlan0: MAC port 0 enabling failed
Dec 6 08:16:13 localhost kernel: [ 2684.463514] hostap_pci: wlan0: resetting card
Dec 6 08:16:15 localhost kernel: [ 2686.664525] wlan0: interrupt delivery does not seem to work
Dec 6 08:16:15 localhost kernel: [ 2686.664530] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:16:17 localhost kernel: [ 2688.663241] wifi0: interrupt delivery does not seem to work
Dec 6 08:16:17 localhost kernel: [ 2688.703314] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:16:17 localhost kernel: [ 2688.703315] wlan0: Port type setting to 1 failed
Dec 6 08:16:17 localhost kernel: [ 2688.723340] wlan0: MAC port 0 enabling failed
Dec 6 08:18:13 localhost kernel: [ 2804.386357] hostap_pci: wlan0: resetting card
Dec 6 08:18:15 localhost kernel: [ 2806.587699] wlan0: interrupt delivery does not seem to work
Dec 6 08:18:15 localhost kernel: [ 2806.587704] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:18:17 localhost kernel: [ 2808.586422] wifi0: interrupt delivery does not seem to work
Dec 6 08:18:17 localhost kernel: [ 2808.626468] hostap_pci: wlan0: already resetting card - ignoring reset request
Dec 6 08:18:17 localhost kernel: [ 2808.626471] wlan0: Port type setting to 1 failed
Dec 6 08:18:19 localhost kernel: [ 2810.625118] wlan0: interrupt delivery does not seem to work
Dec 6 08:18:19 localhost kernel: [ 2810.625121] wlan0: MAC port 0 enabling failed
please, have anybody idea what is wrong?
thanks for help / tips ...
Last edited by jancici (2012-03-21 08:47:06)

okay, I did blacklist hostap_pci, I did find out that with orinoco_pci module it is more stable
BUT
sometimes it hang up with same error message
Dec 6 23:03:45 localhost kernel: [ 2465.908317] ------------[ cut here ]------------
Dec 6 23:03:45 localhost kernel: [ 2465.908324] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x257/0x260()
Dec 6 23:03:45 localhost kernel: [ 2465.908326] Hardware name: System Product Name
Dec 6 23:03:45 localhost kernel: [ 2465.908328] NETDEV WATCHDOG: eth1 (orinoco_pci): transmit queue 0 timed out
Dec 6 23:03:45 localhost kernel: [ 2465.908329] Modules linked in: fuse ext2 mbcache snd_hda_codec_hdmi snd_hda_codec_realtek orinoco_pci orinoco r8169 cfg80211 mii
i915 drm_kms_helper drm snd_hda_intel evdev snd_hda_codec mei(C) i2c_algo_bit rfkill intel_agp psmouse wmi i2c_i801 i2c_core intel_gtt snd_hwdep snd_pcm button proc
essor video snd_timer snd soundcore snd_page_alloc btrfs zlib_deflate crc32c libcrc32c hid_a4tech usbhid hid sd_mod ahci pata_acpi libahci xhci_hcd pata_via libata e
hci_hcd scsi_mod usbcore
Dec 6 23:03:45 localhost kernel: [ 2465.908365] Pid: 0, comm: kworker/0:1 Tainted: G C 3.1.4-1-ARCH #1
Dec 6 23:03:45 localhost kernel: [ 2465.908366] Call Trace:
Dec 6 23:03:45 localhost kernel: [ 2465.908368] <IRQ> [<ffffffff81061b9f>] warn_slowpath_common+0x7f/0xc0
Dec 6 23:03:45 localhost kernel: [ 2465.908375] [<ffffffff81025047>] ? intel_pmu_enable_all+0xa7/0x110
Dec 6 23:03:45 localhost kernel: [ 2465.908378] [<ffffffff81061c96>] warn_slowpath_fmt+0x46/0x50
Dec 6 23:03:45 localhost kernel: [ 2465.908381] [<ffffffff810f1743>] ? perf_ctx_unlock+0x23/0x30
Dec 6 23:03:45 localhost kernel: [ 2465.908383] [<ffffffff81364377>] dev_watchdog+0x257/0x260
Dec 6 23:03:45 localhost kernel: [ 2465.908386] [<ffffffff81071e61>] run_timer_softirq+0x131/0x440
Dec 6 23:03:45 localhost kernel: [ 2465.908388] [<ffffffff81364120>] ? qdisc_reset+0x50/0x50
Dec 6 23:03:45 localhost kernel: [ 2465.908390] [<ffffffff8101c139>] ? read_tsc+0x9/0x20
Dec 6 23:03:45 localhost kernel: [ 2465.908392] [<ffffffff810691c0>] __do_softirq+0xb0/0x270
Dec 6 23:03:45 localhost kernel: [ 2465.908395] [<ffffffff81096158>] ? tick_dev_program_event+0x48/0x110
Dec 6 23:03:45 localhost kernel: [ 2465.908397] [<ffffffff8109623f>] ? tick_program_event+0x1f/0x30
Dec 6 23:03:45 localhost kernel: [ 2465.908400] [<ffffffff8140c76c>] call_softirq+0x1c/0x30
Dec 6 23:03:45 localhost kernel: [ 2465.908403] [<ffffffff81016a15>] do_softirq+0x65/0xa0
Dec 6 23:03:45 localhost kernel: [ 2465.908404] [<ffffffff810696ce>] irq_exit+0x9e/0xc0
Dec 6 23:03:45 localhost kernel: [ 2465.908407] [<ffffffff8140d10e>] smp_apic_timer_interrupt+0x6e/0x99
Dec 6 23:03:45 localhost kernel: [ 2465.908409] [<ffffffff8140afde>] apic_timer_interrupt+0x6e/0x80
Dec 6 23:03:45 localhost kernel: [ 2465.908410] <EOI> [<ffffffff81279e9b>] ? intel_idle+0xcb/0x120
Dec 6 23:03:45 localhost kernel: [ 2465.908415] [<ffffffff81279e7d>] ? intel_idle+0xad/0x120
Dec 6 23:03:45 localhost kernel: [ 2465.908417] [<ffffffff8131d756>] cpuidle_idle_call+0xc6/0x350
Dec 6 23:03:45 localhost kernel: [ 2465.908419] [<ffffffff81013229>] cpu_idle+0xc9/0x120
Dec 6 23:03:45 localhost kernel: [ 2465.908422] [<ffffffff813f8944>] start_secondary+0x202/0x209
Dec 6 23:03:45 localhost kernel: [ 2465.908424] ---[ end trace 58cac98ca8b4102b ]---
Dec 6 23:03:45 localhost kernel: [ 2465.908433] eth1: Tx timeout! ALLOCFID=0128, TXCOMPLFID=03eb, EVSTAT=808b
maybe I need some more modern card, something with atheros chipset ...

RTS5229 PCI Express Card Reader=Unassigned class [ff00] dv6t-7000

Hello everyone. I am having issues with the built-in card reader in my HP dv6t-7000. I know that this kind of question has been asked before, but I am unable to find a solution. I am new to Arch, but have used almost ALL other distros. Arch is the first Linux on my laptop. Now down to the details.
lscpi
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
0a:00.0 Network controller: Ralink corp. Device 539a
0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)
lsusb
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 138a:0018 Validity Sensors, Inc.
Bus 003 Device 004: ID 05c8:033a Cheng Uei Precision Industry Co., Ltd (Foxlink)
The card reader class is Unassigned. Why? I followed this thread:
http://ubuntuforums.org/showthread.php?t=206464 and installed the realtek driver with no sucess. dmesg shows no changes. The card reader is basically ignored.
according to lsmod the module is active.
rts5229 299012
What should I do?

more info :
lspci -vnn | grep -A5 RTS5229
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1818]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at 71000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rts5229
http://vincentlycheng.wordpress.com/201 … t-working/
same fix. Didn't work for me. Should I try rtsx_pci instead?
Last edited by ryanvade (2013-01-24 04:49:06)

PCI Ethernet card problem.....please help!

Hi everyone, I intalled yesterday a PCI Ethernet card (10/100) on my PowerMac G5.
!0.5 immediately recogenize it and setted it with DHCP mode but internet looks to be slow so I chaged the configuration with static IP but with out any good result.
Internet works but very slooly while the network works great with (10/100 card and fine with integrated gigabit lan).
Someone could help me to understand while the PCI ethernet card doesn't work fine with internet? It's directly connected on a Netgear firewall routrer.....
thanks to everyone

But it could be unsupported the second ethernet on a powermac g5?
No, the fact that it shows up is proof that it works.
What Speeds are you getting with it?...
http://www.speakeasy.net/speedtest/
Also, in System Preferences>Network>Show>Ethernet 2>Ethernet tab>Configue:>Manually, try setting the speed lower & Duplex to Half-Duplex, restart required, test that setting.

Why do I often get significantly better performance out of the integrated GFX on the new MBP 15"?

I have the new lower-end 15" MBP. I have never once experienced a time where the discrete GPU outperformed the "HD Graphics 3000". Just the opposite, in fact. On a particular itunes visualizer, I get around 55fps with the integrated GFX, and around 32 with discrete. When playing games from The Orange Box, I get 90-140fps on integrated gfx and 30-50 on discreet. These are the only specific benchmarks I have, but I have noticed the same trend elsewhere too. Is there something wrong with my computer, or is this the norm?

wyager wrote:
@ds_storeI thought the HD 3000 didn't really have any RAM, but it could borrow 384 megs from the system RAM?
Yes the HD 3000 uses main memory where programs and working files are stored, assuming the 384MG is assigned when the machine boots up. If one places more RAM in their machine, there is the possibility that more memory could be used by the HD 3000.
With about 11 on the OpenGL for the dual core with HD 3000, the quad core with HD 3000 might be around 22 or so on the OpenGL which might be just around as fast as the descrete Radeon 6490M. (which is a poor card BTW)
If certain programs were optimized for the HD 3000 by default, yea sure on this machine it's looking like certain programs may be faster on the HD 3000 than on the descrete card.
wyager wrote:
I understand if the HD 3000 gfx performs better at encoding/decoding video, it has a whole new instruction set for that, but it seems like if it performs this well all around, apple shouldn't have wasted the space for the discrete card...
It's looking with the low end 15" one has the same performance on either, all depends upon the software if it's written for integrated or descrete graphics.
Some 3D games won't run unless it has a descrete video card, what's the use.
You can see here though, descrete graphics is way ahead of integrated graphics
http://www.cbscores.com/index.php?sort=ogl&order=desc

Fitting a mini pci wifi card to a T21 HELP PLEASE! :D

hello you lovely people
I currently have USB2.0 functionality and wifi on my T21 courtesy of a dongle and power from the 5v mouse socket
what i want to do is put a mini pci wifi card inside my T21 so i dont have a dongle sticking out like a sore thumb
1. is this possible or is it only the T23 you can do this too?
2. can anyone show me the specific card and aerial i would need
i cant find any help on the net for the T21 in particular
hoping someone here might shed some light on this
thanks for any help or pointers you can give
D
T42 - T21 - Tecra 8200 all xp

Your best bet would be to find a complete lid with integrated wireless from a T23, and add an internal card, Broadcom 4306 or 4309 (b/g and a/b/g respectively) have been proven to work well in these machines.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Pci sound card and beats together?

I have an HPE h8-01280t with built in beats audio. I'd like to install a Creative Labs pci audio card so that beats will play through my computer speakers while I can output simultaneous pci audio to another device (beats in analog, pci in digital output). Can I do this?
This question was solved.
View Solution.

I doubt if that can be done. Cause once you install a pci sound card, the integrated sound gets disabled.
You cannot get output from both.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Front audio with PCI sound card?

Well, the front audio on my Antec P160W worked perfectly with the integrated sound, but I changed to my SoundBlaster Audigy Player because of the HORRIBLE audio quality. Now the front audio ports don't work. What do I need to do to make it work again? I'm not going back to the integrated.
At first I thought that I had to put the connectors for the front audio on the sound card, but the manual of it doesn't show any of those features.

I was wondering that myself. The only thing I think you could possibly do is have both the onboard and the pci sound card enabled and use the onboard sound just for the headphones. I have no tried this yet as I do have the cables connected to the mobo but I have the onboard sound disabled.

PCI-FBUS -- Dell Optiplex 760, no video after installing the NI PCI-Fbus card

I am just beginning the process of upgrading my 30+ production assembly stations currently using NI PCI-FBUS cards with new computers. (our current PCs are HP dc5100)
I want to utilize our new desktop standard PC system the Dell Optiplex 760.
When I install our existing NI PCI-FBUS cards pulled from functional old PCs and place into this new Dell PCs the PC displays no video signa during the boot process.
I have tried both of the PCI slots on the motherboard, I have upgraded the integrated Intel NIC driver. I have removed the optional dual head video card from the PCI-E slot and am now using the on-board video.
I have run out of things to swap/disable with out correcting the no video issue.
This is the first problem I have had with the new PCI-FBUS cards. They have always seem to plug and play until this new PC model.

Update . ... after swapping the NI PCI-FBUS card with several other PCs, I have determined that card to be defective. It will not start in the new PCs, the other cards I have tested will. I think this is isolated to this card only, so I will be contacting NI about repair/replacement of it.

Dv6265us connexant PCI sound card + windows 7 = Not working

So I'm here becuase I can't find a driver on my own. I've scoured the internet for hours, finding very little to help with my issue. So here goes...
I have an HP Pavilion dv6000 (Dv6265us), and ever since I installed window 7, Windows cannot figure out what drivers to install for the PCI sound card. The best I've found so far says this:
"Windows found driver software for your device but encountered an error while attempting to install it"
"Microsoft UAA Bus Driver for High Definition Audio"
"If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Now here's the funky part...everywhere I've found information on my laptop, it says I have a Conexant PCI sound card. If I'm wrong I would love for someone to tell me; better yet, a link to a download to actually be able to use the PCI sound card. Right now the card is under other devices and is listed as "PCI Device".
Now the Link I've provided from the conexant site will tell you this under PC Audio Support - Windows® 7,
"Conexant develops audio solutions that are used in a wide range of products including personal computers. We provide customized audio drivers to our customers, which include major computer manufacturers globally. At the request of these manufacturers, Conexant does not provide end-user support or drivers for PC audio products. If you have an issue with the audio configuration in Windows 7, please contact the manufacturer of your computer.
I tried calling HP support, but they wouldn't even answer my yes or no question... "Do you have audio drivers for my laptop that will allow me to hear sound?" Instead of saying yes or no, I was told that I needed to pay fifty to one-hundred dollars;....fifty dollars for a one time fee of telephone service, or one-hundred for the year. I even went as far as asking..."if you can't fix my problem, do I get a refund?" I was told no...so here I am. I've had problems before with hp...but this is rediculous, and whats worse is from the way things look, Connexant was told NOT to support their own product, or provide drivers for windows 7 by their customer(HP). I realize everyone is hurting for money, but **bleep**, this is a new low...

To answer your question, there are no windows 7 drivers for that model notebook. The notebook was designed for Windows 2000, Windows xp and windows vista.
This is one of the issues with upgrading the OS on a computer before checking the specs of the hardware.
I do understand the frustration but it would be more beneficial to revert back to the original OS that the notebook came with. That is what the HP support desk will have you do to prove functionality of the notebook should you have paid for the Diagnostic Support.
Although I am an HP employee, I am speaking for myself and not for HP. Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Startup gets 'Network cable unplugged' on mini-PCI wireless card

I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
There are no errors in the Event log.
I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
(Running Win2K Professional)

Checking other boards for help (Netgear etc.) it seems that the 'Network cable unplugged' is a common message when wireless connectivity is failing. However, to prove the point, I have disabled the other LAN card (for which I was also getting 'network cable unplugged' but as expected since it was). I still get the same issue with the wireless card, although now the reboots are slightly more predictable - it normally seems to succeed on the third reboot. I guess disabling the other card has changed the startup timing slightly and in that way made things slightly better.
Again, any other suggestions gratefully received. As this seems to be a timing issue at startup, I am suspicious that one of the other things that runs at that time is causing the problem.

Startup gets 'Network cable unplugged' on mini-PCI wireless card (again)

Reposting as previous topic has been locked although has not been resolved. Original post below, please see previous post for more details
I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
There are no errors in the Event log.
I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
(Running Win2K Professional)

More info : I have found that this is time related rather than related to the number of reboots. It always fails on the first reboot after being shut down for a period of time. At this point, however long I wait the connection never comes up. However, if I wait a few minutes and then reboot, the second reboot will always successfully establish the connection.
On this basis, the problem has become slightly less annoying as I have a workaround - boot once, wait a few minutes and reboot. That being said, any information on how I can isolate this further (e.g. tracing what is running at startup) would be gratefully recieved.

How to get counter values from pci 6221 card?

Hii
I am using PCI 6221 card .. In that i am using the ctr o .. In my application i am using Linear encoder to measure the Lift movement.. so from software how to access the counter values i.e how much mm it moves...

Measure Angular Position.vi in the LabVIEW examples will be a good starting point. Adapt it to Linear Encoder by clicking on the selector below DAQmx Create Channel.vi.
You can also create a corresponding DAQmx Global Channel (or task) in MAX and then use it in your code.
Feel free to post back if you need further help.
Message Edité par JB le 10-31-2008 02:15 PM

Problem with KTV3 and PCI USB card extension from QTEC type 13068

Hello all,
I have been trying to make work a PCI USB card extension from QTEC type 13068. This card allows to give 4 USB ports more.
My problem is that oinly 2 ports are working and WINXP SP1 is saying that there are not enough ressources for all the PCI functions. However there is enough free IRQ. Even using this card alone on the mainboard give the same error.
I am using a KTV3 (MS-6712 VER:1.0A) and I have no idear why this is happening. Could it be a bad interaction between the BIOS and the card? wall Or WIN XP? angryfire
All comments and ideas to try are welcome especially from those who have this QTEC card.
Regards.

What operating system are you using? The card requires SP1 for XP and SP4 for 2000. If you have these, try to uninstal the cardl and let Windows reinstall the card on start-up.

KA780G integrated gfx + PCI-E card

Similar Messages

Maybe you are looking for