KA780G second network card doesn't work

Hi everybody,
Today, I put an second network card on the KA780G board (it's for a round robin network), on a free PCI slot, and this card isn't recognised by Linux and Windows (in Windows XP, when the network card is connected, my graphical card works bad as well).
I tested this network card in another computer and it's working well, I try with another type of network card and it's not working.
I upgraded the BIOS with the latest release and reset the bios parameters but it doesn't work.
Do I need to put some specifics parameters in the BIOS ?
Someone as an idea ?
Thanks
Matt

As you want... but I know the truth
Transfert a file takes me twice the time when the second network card was unpluged (the test was made with two differents files with the same size, this is for keeping disk caching speeding the transfert).
I think, your're not understanding, so let me explain the achitecture of my network : two computers pluged to my "super magic switch" (each with one network card) and my NAS with two round robin's network card.
I transfert one file from the NAS to the first computer and at the same time another file from the NAS to the second computer. The network speed was (on the NAS) about 24MB/s (see with the system monitor).
If you're right explain me why many people using port trunking with their switches ?
Matt.

Similar Messages

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

My Ipad2 won't turn off. I've tried the reset method, holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either. Help ??

My Ipad2 won't turn off. I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work. I can't get onto the internet via wi-fi either (don't have a 3G card fitted). All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

P20-552: 2GB SD card doesn't work.

I have a P20-552 (PSP26E-025E9-S4) which is about 18 months old. I recently bought a Canon digital camera (IxUS 750) with a 2GB Sandisk Ultra II SD card and the combination is working well. Although I can transfer images from the camera to my Toshiba portable using an USB cable, sometimes I would like to use the SD slot on the portable but there seems to be a problem: seconds after pressing home the SD card in the slot I get the message "Disk is not formatted - Do you want to format it now?". I reply OK but then I get the message "The disk in drive E cannot be formatted"
The card continues to work perfectly well in both my camera and in my iPaq PocketPC. The SD card slot in the Toshiba will work quite happily with the Sandisk 256MB SD card that is usually in my PDA.
Anybody has any idea why the 2GB card doesn't work in the Toshiba? Is it a question of updating a driver - I did look the other day but I couldn't find anything that to me seemed appropriate but I might well have overlooked something..
I am running XP Home (SP2) and have fully automatic updates ON. I have Norton Virus and Zone Alarm running and am not experiencing any problems with any other software/applications - at least, no problem since someone suggested vacuuming my overheating laptop a few weeks ago ;-)
Thanks, Brian.

It seems that the unit doesnt support this card.
Check your user manual. There you will find a information that this unit supports only the following SD card sizes: 8/16/32/64/128/256 and 512 MB
According to this document the 2 GB are to high.

Switch to second network card

Hi
SBS 2011.
The dell server has two network cards and one is disabled. Now the active card seems to be causing issues. What are the steps to reliably switch to the second network card?
Thanks
Regards

Hi:
SBS 2011 will respond normally to a switch in nics. See this thread from this forum:
http://social.technet.microsoft.com/Forums/en-US/753700f8-3fe0-4b8b-a91e-25860ff13191/best-method-to-replace-network-adapter-in-sbs-2011?forum=smallbusinessserver
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

My Card doesn't work anymore and keeps asking me for the card information. How do I turn the card option back to "none".

How do I turn this off? I can't download anything until I put in the card's information. But the card doesn't work anymore, it ran out of money. It keeps saying that my last perchase was unseccessful or something. I just want this to stop so I can update and download apps! Please help!

My iMac with Snow Leopard 10.6.8 crahed b/c the HD cannot be repaired. I reinstalled Mac OS X and luckily have most documents and applications. I have moved them all into folders before I erase the HD. I had all my documents but lost the 3 applications for iWorks. It says go to the store, buy and enter your serial#. That is not working. Here it is:MB966Z/A
WVL 001299 10959191-000
I need the updates. Apple has my sign in Apple ID.
Thanks,
pandaposyus

Hİ My ipad's screen is black. When it take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

Hİ
My ipad's screen is black. When it take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

How long did you let it charge? It may take 30 minutes before the iPad responds when the battery is completely drained. Let it charge for at least 30 minute using the wall charger. Then rest the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until the battery is 100%.
If the iPad still does not start make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

Welcome to the Apple Community.
The following article(s) may help you.
iTunes Card and Gift Certificate FAQ

Installing a second Network Card

Having just installed Solaris 8 on an Intel based machine, the system is identifying two installed network cards.
Can anyone tell me how to configure the second Network Card - IP address etc as the Web Start package will only allow configuration of the first network card

You just need to create a new text file /etc/hostname.{nic-interface-name}
Lets assume the system has two intel etherexpress pro NICs installed. The intel NIC's driver
name / interface name is "iprb". So the two NICs are named "iprb0" and "iprb1".
The file /etc/hostname.iprb0 should already exist (created by the inital installation).
Just create /etc/hostname.iprb1 and put into this file the ip-address of the iprb1 interface.
You can also use a hostname in that file and add a hostname -> ip address mapping
into the /etc/hosts file.
During the next reboot the system will automatically bring up both the iprb0 and iprb1
interface.

Why my nano cut sim card doesn't work on iphone 5c?

why my nano cut sim card doesn't work on iphone 5c?

Cut cards often don't work. Get a real nano SIM from your cell carrier.
Regards.

[SOLVED] network randomly doesn't work after reboot (e100)

Hi
Lately I have some weird issues with network. I shutdown computer during night, so basicly I reboot it at least once per day and every now and then without any pattern network doesn't work at all and so far only solution I have found is to reboot (again).
Before anything else I'm sure it's not hardware problem, since other OS on same computer don't have any issues, neither is router since other devices in network from laptops to mobile phones work flawless.
Relevant info and what I have found so far (not everything is copy/pasted so there may be some typos):
$less rc.conf (network part)
eth1="eth1 192.168.1.242 netmask 255.255.255.0 broadcast 192.168.1.255
INTERFACES=(eth1)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
$ifconfig
eth1 Link encap:Ethernet HWaddr 00:D0:B7:5A:7A:A9
inet addr:192.168.1.242 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:380 errors:0 dropped:0 overruns:0 frame:0
TX packets:380 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:36154 (35.3 Kb) TX bytes:36154 (35.3 Kb)
$route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
$ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data
From 192.168.1.242 icmp_seq=2 Destination Host Unreachable
So basicly network is dead, can't even ping router, cable connection is detected tho (lights are on). I have tried to restart newtork with /etc/rc.d/network stop/start, nothing. Only clue is dmesg.
$dmesg
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth1: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
e100 0000:03:07.0: firmware: requesting e100/d101m_ucode.bin
ADDRCONF(NETDEV_UP): eth1: link is not ready
modrope -r e100 and then reloading it doesn't help either, but reboot does (once I had to reboot twice tho).
Anyone with more clue and ideas then me, it's getting really annoying, it also kill whole KDE plasma-desktop for couple of minutes before plasmoids find out network is really down and I'm not really fan of morning "gamble". I can't pinpoint some hard date/update when this started to happening because like I said it's random but last couple of months should be quite accurate. Thanks in advance.
EDIT: dmesg when network works:
tilen@pikmin ~]$ dmesg | grep e100
pci 0000:03:07.0: Firmware left e100 interrupts enabled; disabling
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth0: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
Last edited by NoOrdinary (2009-09-05 09:47:20)

I don't have anything special set at router but I doubt rc.conf play any role. I will try to set it up with dhcp (but I think I have tried that already) if there is any change.
This morning I had to reboot twice, so new kernel didn't help. Fowler, what network card are you using, also e100 (well or some intel)? I dunno, should this be handed to the kernel team? If it will piss me enough one morning I'll just go and buy a new network card, just wanna be sure that will really solve the problem.
UPDATE: OK, this is just silly. I remebered I have acctualy onboard LAN so I edited rc.conf and dived into the dust under my desk to move cable and there I found out it was acctual onboard in use all the time Now this dosen't make much sense to me anymore, when I can't get net up all the stuff in dmesg is e100 related. Anyway, I connected network to e100 and rebooted, suprise, same story. Dmesg reported again link was not ready. I edited rc.conf to
INTERFACES=(eth0 !eth1)
in case this has anything to do with proper timing at assigning whatever needs to be assigned to network cards at boot so I'm sure just 1 card with all info provided get's kicked in at boot. First reboot after that works, it dosen't prove anything yet but at leat it's some kind of progress in recognising proper cause.
UPDATE 2: Nah, still happens. Googling for "no link during initialization" show a lot of familiar problems, almost all on nforce motherboards and mine is nforce too. I just don't get it why this mess seperate PCI network card. In any case it's extremely annoying.
Last edited by NoOrdinary (2009-09-02 11:46:27)

Satellite 1900-803: Hi-Speed USB 2.0 card doesn't work

i have a satellite 1900-803 laptop. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card but it doesn't work. the card's manual says that after successful installation i should see a second "universal serial bus controllers" heading which i didn't. i even had it replaced it with another one thinking that there might be some problems with the drivers, but it still doesn't work. everytime i plug in a device such as an mp3 player, a digital camera or a usb storage device, windows just suddenly locks itself up, the cursor won't move, the ctrl-alt-del function doesn't work, and the worst of all, i can't turn off the machine!
the card says that it runs on any 32-bit slot.
i've browsed the user's manual and the device manager to see if mine is a 32-bit one, but i can't really find it. is this probably the reason why it won't work? or is there any other reason for it not working? if this is the reason, is there a way where i can upgrade my laptop's pc card slot to make it work?
please help.
i've posted this question yesterday morning and haven't got a single reply. is it because it has got to do with an older laptop? please, anybody, help..........
Message was edited by: wes0702

Hi
Did you check the Bios? I assume the Toshiba Bios was preinstalled on your notebook. Am I right? There should be an option for changing the PC card controller mode.
There you can change the controller mode to auto-selected, PCIC compatible or Card bus/16-bit.
If the card supports 32 bit so you shouldnt use the 16bit option.
I think you should play a little bit with this option and possibly the card will work.

Now my NIC card doesn't work: MEDIA DISCONNEC

I was helping my brother install an Audigy 2 ZS to replace his Soundblaster Li've. His machine is a Shuttle VIA Chipset with a P3-733, 52 pc-33 RAM, an old LinkSys 0mbp card with CAT5 and 0B-T connectors on the back (using the CAT5). The network card is plugged into a D-LINK router and which is then connected to a SurfBoard 300 Cable Modem. Before we turned it off the internet connection was working correctly. Anyways, unplugged all of the wires, openned the computer, pulled out the old LIVE card, stuck the new AUDIGY in, replugged everything and ran the Audigy installer (drivers off of CD) and rebooted. At this point the little icon in Windows (XP Pro SP2) that shows your network is not connected was showing. First I checked the wire. Have a green light on the NIC, a green light on the router that comes and goes as I plug the wire in and out. To be sure I tried with another wire as well. I pulled the power on the Router, the Wireless router addon box (also a D-LINK), the cable modem and turned the computer off. Then booted Cable Modem, Computer and then router(s). Still nothing IPCONFIG = Media Disconnected. So then I plugged the cable modem directly into the computer. Did all of the same resets / reboots, IPCONFIG, flushDNS, RELEASE, RENEW... etc... still Media Disconnected. So I am at a lose. What should I do next?
I hear that the Audigy 2 ZS drivers could be causing an IRQ conflict... Would changing PCI slots help?Could this be a registry problem? Would running a restore point help? Should I go out and buy another network card (I know 00mbp card is an upgrade and not expensi've)... Should I pull the Audigy out and put the Li've back in to see if this fixes it's What am I missing?
Ideally I would be able to fix things without having to try a new network card, or bringing back the Audigy... Thanks! Dan P.

Dan,
Try changing the PCI slots on the Audigy 2 ZS. If that doesn't help you may want to cleansweep and reinstall both the Audigy 2 ZS and the NIC (Reinstall the Audigy 2 ZS first then the NIC). Instructions on how to cleansweep the Audigy 2 ZS can be found at:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

IPhone 5 sim card doesn't work

Hi,
One day the SIM card in IPhone 5 just stopped working. I can see the network on the desktop and in general settings, but it does not work for real. I can't make a call, send a message or get internet. Sometimes it goes "No service", "Searching" but then goes back.
I have checked this SIM card with different phone - it works properly good. Any different SIM card in my IPhone also doesn't work.
So I went to the Apple Store (Indonesia, Denpasar, Bali) they said you need to reset all the content and settings. So I did all and nothing happened.
Again SIM doesn't work - same situation. What is interesting sometimes I'm getting messages from the network so it seems that SIM card works some time but I can not make any calls or actions with SIM.
In the App Store guys told me this might be a hardware problem which could not be solved it's just broken.
They say you can exchange an IPhone for the new one but not in Bali because they don't have IPhone 5 anymore. Is it fair?
Please help me what can I do and how can I make my IPhone works or exchanged it for a new one.
I will be in Malaysia, Kuala Lumpur on February 7th. Can I exchange my IPhone here?
Version 7.1.1 (11D201)
was bought in USA 2,5 years ago
I live in Bali, Indonesia
Thank you in advance for any help.
Best regards,
Yulia

Thank you. I bought IPhone in USA 2 years ago.
"The iPhone warranty is not international" - it's very sad. Just wondering why people in the Store told me different things.

2nd graphics card doesn't work after upgrade to 10.6

I ordered my Mac Pro with two ATI Radeon HD 2600 XT graphic cards and they always worked great. After I upgraded to Snow Leopard, it always shows a display connected to the second card even when there isn't. This wasn't an issue until I started having windows displayed on that "ghost" screen that I couldn't see. In the System Profiler, It no longer recognizes the graphics card like it should and reports the wrong amount of memory (1024 instead of 256MB... I wish) and of course reports a "Display" that doesn't exist. Since from time to time I like to connect my TV to my Mac - for movies or whatever else - I connect it to this second graphics card but since 10.6, it hasn't worked.
In short: my second graphics card isn't recognized correctly; it has a ghost display with or without a display connected to it; will not connect to a display.

I'd assume you do have a bad card now. Maybe wait and see if newer ATI cards come out, or opt for 4870 or flash one of the 1GB models that can be flashed, and save couple $100.
http://forums.macrumors.com/forumdisplay.php?f=1

KA780G second network card doesn't work

Similar Messages

Maybe you are looking for