Kadmind not starting
Hi,
I am running OSX server 10.4.8 on an G4 Xserve. I configured it to be an OD master and to authenticate using Kerberos. Lately, I discovered that the Kerberos service was not running. Rebooting once seemed to fix this (Server Admin reported the Kerberos service was running), but upon all subsequent reboots kadmind fails to start. In every case, launchd reports that kadmind is respawning too quickly. I've included the relevant entries from the system log below.
DNS service are provided by a pair of linux hosts on our private network, and the OSX server appears to be able to resolve it's name and IP address correctly:
cougar:/tmp root# dig @192.168.0.1 +noall +answer cougar.baker
cougar.baker. 432000 IN A 192.168.0.33
cougar:/tmp root# dig @192.168.0.1 +noall +answer -x 192.168.0.33
33.0.168.192.in-addr.arpa. 432000 IN PTR cougar.baker.
cougar:/tmp root# dig @192.168.0.32 +noall +answer cougar.baker
cougar.baker. 432000 IN A 192.168.0.33
cougar:/tmp root# dig @192.168.0.32 +noall +answer -x 192.168.0.33
33.0.168.192.in-addr.arpa. 432000 IN PTR cougar.baker.
I've also tried some tips gleaned from other threads on this list and others - explicitly listing the IP/hostname in /etc/hosts and the hostname in /etc/hostconfig but the behavior is always the same.
I began the search for an answer to this problem in a separate thread, but given the change in focus, it seemed like a good idea to start over in a more appropriate topic area.
http://discussions.apple.com/thread.jspa?messageID=3451063#3451063
Any help in resolving this problem would be great.
Thanks,
Chance
Nov 1 14:54:27 cougar configd[52]: setting hostname to "cougar.baker"
Nov 1 14:54:29 cougar configd[52]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Nov 1 14:54:29 cougar launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[83]: exited abnormally: Hangup
Nov 1 14:54:29 cougar configd[52]: posting notification com.apple.system.config.network_change
Nov 1 14:54:29 cougar lookupd[101]: lookupd (version 369.5) starting - Wed Nov 1 14:54:29 2006
Nov 1 14:54:31 cougar mDNSResponder: Adding browse domain local.
Nov 1 14:54:32 cougar launchd: edu.mit.kadmind: exited with exit code: 1
Nov 1 14:54:32 cougar launchd: edu.mit.kadmind: respawning too quickly! throttling
Nov 1 14:54:32 cougar launchd: edu.mit.kadmind: 8 more failures without living at least 60 seconds will cause job removal
Nov 1 14:54:32 cougar launchd: edu.mit.kadmind: will restart in 10 seconds
Nov 1 14:54:33 cougar configd[52]: AppleTalk startup complete
Nov 1 14:54:34 cougar mDNSResponder: RecordRegistrationCallback: error -65537
Nov 1 14:54:34 cougar mDNSResponder: RecordRegistrationCallback: error -65537
Nov 1 14:54:34 cougar mDNSResponder: RecordRegistrationCallback: error -65537
Nov 1 14:54:34 cougar mDNSResponder: regrecord_callback: error -65537 received after parent termination
Nov 1 14:54:34 cougar mDNSResponder: ERROR: Only name server claiming responsibility for "_kerberos.cougar." is "."!
Nov 1 14:54:34 cougar mDNSResponder: RecordRegistrationCallback: error -65537
Nov 1 14:54:34 cougar mDNSResponder: regrecord_callback: error -65537 received after parent termination
Nov 1 14:55:53 cougar launchd: edu.mit.kadmind: too many failures in succession
MacBook Mac OS X (10.4.8)
Update:
This morning I followed the example in the kdcsetup man page to reinitialize my kerberos configuration. The Kerberos service now appears to be running, but I still can't authenticate against it. If I change the AFP authentication from Any Method to Kerberos I receive an error when I attempt to log in saying there is a problem with my home directory on an AFP volume. If I change back to Any Method I can log in, but single sign-on doesn't work - I am prompted to authenticate when attempting to mount other AFP volumes served by the same server.
Any ideas?
Details below.
Thanks,
Chance
Kerberos setup:
kerberosautoconfig -r BAKER -m cougar.baker
kdcsetup -f /LDAPv3/127.0.0.1 -w -a diradmin -p topsecret BAKER
I then rebooted the server and no kerberos erros were logged and Server Admin reported the kerberos service as running. Ps also shows things running:
root 38 0.0 0.1 27748 788 ?? Ss 9:05AM 0:00.10 /usr/sbin/kdcmond -n -a
root 47 0.0 0.1 28572 1116 ?? Ss 9:05AM 0:00.03 /usr/sbin/kadmind -passwordserver -nofork
root 175 0.0 0.1 28336 1012 ?? S 9:06AM 0:00.01 /usr/sbin/krb5kdc -n -a
The kerberos log files now exist and are updated at boot time:
cougar:/tmp root# cat /var/log/krb5kdc/kadmin.log
Nov 02 09:03:10 cougar.baker kadmin.local[6790](info): No dictionary file specified, continuing without one.
Nov 02 09:03:10 cougar.baker kadmin.local[6792](info): No dictionary file specified, continuing without one.
Nov 02 09:05:53 localhost kadmind[47](info): Seeding random number generator
Nov 02 09:05:53 localhost kadmind[47](info): No dictionary file specified, continuing without one.
Nov 02 09:05:53 localhost kadmind[47](info): starting
cougar:/tmp root# cat /var/log/krb5kdc/kdc.log
Nov 02 09:05:54 localhost krb5kdc[71](info): setting up network...
Nov 02 09:05:54 localhost krb5kdc[71](info): set up 0 sockets
krb5kdc: no sockets set up?
Nov 02 09:06:03 cougar.baker krb5kdc[175](info): setting up network...
Nov 02 09:06:03 cougar.baker krb5kdc[175](info): skipping unrecognized local address family 16
Nov 02 09:06:03 cougar.baker krb5kdc[175](info): listening on fd 10: udp fe80::203:93ff:fed3:87d4%en0.88
Nov 02 09:06:03 cougar.baker krb5kdc[175](info): listening on fd 11: udp 192.168.0.33.88
Nov 02 09:06:03 cougar.baker krb5kdc[175](info): set up 2 sockets
Nov 02 09:06:03 cougar.baker krb5kdc[175](info): commencing operation
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
Similar Messages
-
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Error "can not start the configuration in parallel does not correct"
Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error -
Can not start data Collection service
I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?
-
I can not start secion in creative cloud from a macbook
I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
En español.
No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
we want a valid and positive responseHello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
Please let me know if you are successful or not. -
Can not start Enterprise Manager web page
I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Dondiego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config" -
"can not start a job" issue in AWM
Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10gApplies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>; -
System PI 7.11 will not start because of R3INLPGM error
Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE Information XXXXXXX SAPINLPGM XXXXXXX *STMT SAPINLPGM XXXXXXX *STMT
From module . . . . . . . . : O4TMKLIBIX
From procedure . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
To module . . . . . . . . . : O4TMKLIBIX
To procedure . . . . . . . : prtjoblA
Statement . . . . . . . . . : 15
Message . . . . : SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
MatthiasHello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf -
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....Are you sure the Database and the listeners are up and running?
-
SAP Service Not Starting in BI 7.0
Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay PaulHi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul -
Hello,
<br>
our Java Stack of our SAP PI 7.11 do not start. In the SAP MMC we get following error:
<br>
-1501 (Some managers fails to start)
<br><br>
I loooked into the std_server0 log and find this error:<br><br>
Loading [PoolManager]... [31] ms<br>
ERROR: Server process failed to start due to:<br>
java.lang.NoClassDefFoundError: com/sap/jvm/monitor/thread/ThreadWatcher$Callback<br>
at java.lang.Class.getDeclaredConstructors0(Native Method)<br>
at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)<br>
at java.lang.Class.getConstructor0(Class.java:2671)<br>
at java.lang.Class.newInstance0(Class.java:321)<br>
at java.lang.Class.newInstance(Class.java:303)<br>
at com.sap.engine.core.Framework.loadSingleManager(Framework.java:601)<br>
at com.sap.engine.core.Framework.loadManagers(Framework.java:394)<br>
at com.sap.engine.core.Framework.start(Framework.java:329)<br>
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)<br>
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)<br>
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)<br>
at java.lang.reflect.Method.invoke(Method.java:585)<br>
at com.sap.engine.boot.FrameThread.startFramework(FrameThread.java:155)<br>
at com.sap.engine.boot.FrameThread.run(FrameThread.java:179)<br>
at com.sap.engine.boot.StartFrame.work(StartFrame.java:93)<br>
at com.sap.engine.boot.Start.main(Start.java:35)<br>
Caused by: java.lang.ClassNotFoundException: com.sap.jvm.monitor.thread.ThreadWatcher$Callback<br><br>
Now I post you the all of the Log-File:<br>
<br>
stdout/stderr redirection<br>
<br>
node name : server0<br>
host name : iilsrv02<br>
system name : IPE<br>
system nr. : 00<br>
started at : Mon Jan 09 13:57:24 2012<br><br>
JVMX version - Nov 5 2007 23:34:18 - 01_REL - optU - windows amd64 - bas2:88748 (mixed mode, sharing)<br>
(CompilerOracle exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources)<br>
(CompilerOracle exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector <br>getApplicationDomain)
(CompilerOracle exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub)<br>
(CompilerOracle exclude com/sapportals/portal/prt/util/StringUtils escapeToJS)<br>
(CompilerOracle exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices)<br>
(CompilerOracle exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile)<br>
(CompilerOracle exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup)<br>
(CompilerOracle exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue)<br>
(CompilerOracle exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode)<br>
(CompilerOracle exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode)<br>
(CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)<br>
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement)<br>
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence)<br>
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations)<br>
(CompilerOracle exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto)<br>
(CompilerOracle exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects)<br>
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory<br>
WARNING: The hash of package index [E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\index.list] is corrupted<br>
Reading kernel properties from kernelProperties.bin file...<br>
Checked the data for 47 ms<br>
Read the objects for 234 ms<br>
Substituted the values for 31 ms<br>
Finished reading kernel objects for 265 ms<br>
Startup mode [NORMAL] and action [NONE] read<br>
AS Java version [7.11.3710.93986.20100429121726] is starting server process [ID2867950] on host [iilsrv02]...<br>
Loading [LogManager]... [157] ms<br>
Loading [PoolManager]... [31] ms <br>
ERROR: Server process failed to start due to:<br>
java.lang.NoClassDefFoundError: com/sap/jvm/monitor/thread/ThreadWatcher$Callback<br>
at java.lang.Class.getDeclaredConstructors0(Native Method)<br>
at java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)<br>
at java.lang.Class.getConstructor0(Class.java:2671)<br>
at java.lang.Class.newInstance0(Class.java:321)<br>
at java.lang.Class.newInstance(Class.java:303)<br>
at com.sap.engine.core.Framework.loadSingleManager(Framework.java:601)<br>
at com.sap.engine.core.Framework.loadManagers(Framework.java:394)<br>
at com.sap.engine.core.Framework.start(Framework.java:329)<br>
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)<br>
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)<br>
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)<br>
at java.lang.reflect.Method.invoke(Method.java:585)<br>
at com.sap.engine.boot.FrameThread.startFramework(FrameThread.java:155)<br>
at com.sap.engine.boot.FrameThread.run(FrameThread.java:179)<br>
at com.sap.engine.boot.StartFrame.work(StartFrame.java:93)<br>
at com.sap.engine.boot.Start.main(Start.java:35)<br>
Caused by: java.lang.ClassNotFoundException: com.sap.jvm.monitor.thread.ThreadWatcher$Callback<br>
Loader Info -
<br>
ClassLoader name: [system:Kernel]<br>
Living status: alive<br>
Direct parent loaders:<br>
[library:core_lib]<br>
Resources:<br>
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\jenqulib.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcantlr~runtime.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtapi_for_assembly.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblcachemgmtimpl.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblcache_pluginslib.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblframekrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_cacheimpl.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_classloadkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_clusterkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_configurationkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_databasekrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_licensingkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_lockingkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_logkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_poolkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_servicekrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcbljkernel_threadkrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcblopensqlkernelimplOpenSQLKrn.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcjeoffline_deployimpl.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcjesessionmgmtimpl.jar
E:\usr\sap\IPE\DVEBMGS00\j2ee\cluster\bin\kernel\sap.comtcseclikeylikey_assembly.jar<br>
<br>
at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:274)<br>
at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:243)<br>
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)<br>
... 16 more<br><br>
Have someone an idee where to find the error and how we could resolve it?<br><br>
Thanks and regards<br>
MartinHi,
You are right, JSPM will not start with server0 down. And server0 will not come up with SAP JVM not updated.
Perhaps you could try a manual update of the SAP JVM as mentioned in the thread:
SAP EHP1 FOR SAP NW CE 7.1 - java doesn't start after updating jvm
Hope it helps.
Regards,
Srikishan -
WebAnalysis does not start after workspace is set on Windows Authentication
I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working! -
Application server will not start up
Hello,
I have read quite a few topics concerning this problem, and have tried many things but without success.
I am running on Windows XP Pro. The installation goes fine, but when I run a project, the application server cannot start, and I get a message after quite a long time saying that it can't start and to check my port numbers,etc.
I used to have Sun Java Creator, but I uninstalled it. I tried deleting the \Windows\System32\productregistry file. I tried uninstalling completely and reinstalling in C:\Sun\Creator2, but the problem is still the same. I tried deleting the domain with "asadmin" and recreating it, but I still get the problem.
I am posting all the relevant information from the logs, hopin someone will be able to help me out....
C:\Sun\Creator2ea2\install.log
(Jan 14, 2006 3:34:36 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (coreFiles)
(Jan 14, 2006 3:35:42 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (jdkFiles)
(Jan 14, 2006 3:36:32 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (appserverFiles)
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Install Application Server Action (bean4)
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, # Wizard Statefile generatd by make_statefile.sh
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, # Wizard Statefile section for Sun Java System Application Server
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, [STATE_BEGIN Sun Java System Application Server 42cc62066aa69c151b1093bfcb735f8e112358e8]
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, defaultInstallDirectory = C:\Sun\Creator2ea2\SunAppServer8
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, currentInstallDirectory = C:\Sun\Creator2ea2\SunAppServer8
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, JDK_LOCATION = C:\Sun\Creator2ea2\java
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_USERNAME = admin
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_PASSWORD = adminadmin
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_PORT = 24848
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASWEB_PORT = 28080
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_HTTPS_PORT = 21043
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, STORE_ADMIN_AUTH = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, ADMIN_PASSWORD_ENCRYPTED = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, CREATE_SAMPLES_DOMAIN = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, CREATE_DESKTOP_SHORTCUT = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, [STATE_DONE Sun Java System Application Server 42cc62066aa69c151b1093bfcb735f8e112358e8]
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Installing Application Server...
(Jan 14, 2006 3:37:58 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1,
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Extracting installation files...
Launching Java(TM) 2 Runtime Environment...
Deleting temporary files...
"exitcode = 73"
(Jan 14, 2006 3:37:58 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Finished
(Jan 14, 2006 3:37:58 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Post Install Core Action (postInstallCoreAction)
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpecTed output: "C:\Sun\Creator2ea2\bin\storagebuilder.bat"
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, preparsing C:\Sun\Creator2ea2\rave2.0\core\rowset.jar
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Temp\mdrstorage\storage
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, ... done
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, preparsing C:\Sun\Creator2ea2\rave2.0\core\sqlx.jar
<SNIP>
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\pe-init-tray.bat"
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\jdic_0_9.jar
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\LICENSE.jdic_0_9
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\tray.dll
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, 3 fichier(s) copi�(s).
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, 1 fichier(s) copi�(s).
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Avertissements de compilation :
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 31: L'attribut 'classname' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\pe-start.bat"
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, WARNING: The adminpassword option is insecure and should not be used since it can compromise your password. Please use either the command prompt or the passwordfile option.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Domain creator created.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Starting Domain creator, please wait.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Log redirected to C:\Sun\Creator2ea2\SunAppServer8\domains\creator\logs\server.log.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Timeout waiting for domain creator to go to starting state.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Avertissements de compilation :
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 44: L'attribut 'debug-options' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 61: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 72: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 83: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 104: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 115: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 126: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 144: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 155: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, CLI156 Could not start the domain creator.
(Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\deploy-ejbs.bat"
(Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, WARNING: The password option is insecure and should not be used since it can compromise your password. Please use either the command prompt or the passwordfile option.
(Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
etc.
etc.
Hope I haven't drowned you with this log....
Thanks,
RaphaelHere's a bit more information : the output of the C:\Sun\Creator2ea2\SunAppServer8\domains\creator\logs\server.log file :
[#|2006-01-14T15:42:08.188+0100|WARNING|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
[#|2006-01-14T15:42:08.198+0100|INFO|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|
C:/Sun/Creator2ea2/java\bin\java
-client
-XX:PermSize=32m
-XX:MaxPermSize=128m
-XX:+CMSPermGenSweepingEnabled
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/logs/server.log
-Djava.endorsed.dirs=C:/Sun/Creator2ea2/SunAppServer8/lib/endorsed
-Djava.security.policy=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/server.policy
-Djava.security.auth.login.config=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/cacerts.jks
-Djava.ext.dirs=C:/Sun/Creator2ea2/java/jre/lib/ext;C:/Sun/Creator2ea2/SunAppServer8/domains/creator/lib/ext
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=creator
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=C:/Sun/Creator2ea2/SunAppServer8/domains/creator
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=creator
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=C:/Sun/Creator2ea2/SunAppServer8/config
-Djava.library.path=C:\Sun\Creator2ea2\java\jre\bin\client;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\java\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;C:\Program Files\Borland\BDS\4.0\Bin;C:\PROGRA~1\Borland\CBUILD~3\Bin;C:\PROGRA~1\Borland\CBUILD~3\Projects\Bpl;C:\Oracle\OraHomeAPISOFT\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\Program Files\Borland\Delphi7\Bin;C:\Program Files\Borland\Delphi7\Projects\Bpl\;C:\PROGRA~1\Borland\CBUILDER5\Projects\Bpl;C:\PROGRA~1\Borland\CBUILDER3\bin;C:\PROGRA~1\Borland\CBUILDER5\bin;C:\PROGRA~1\Borland\CBUILDER\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\WinSCP3\;C:\Program Files\Fichiers communs\GTK\2.0\bin;C:\Tools;C:\Program Files\vPoint_XP;C:\Program Files\Sybase\SQL Anywhere 9\win32;C:\Program Files\Sybase\Shared\win32;C:\Program Files\Sybase\SQL Anywhere 9\drivers;C:\Program Files\Sybase\Shared\Sybase Central 4.3\win32;C:\SuperWabaSDK\SuperWabaSDK\bin;C:\Java\Ant\bin\;c:\JbuilderX\jdk1.4\bin;C:\Java\SuperWabaSDK\qrfSQL\win32;C:\Java\SuperWabaSDK\WExtLib\jni\VC\Release;C:\Java\FirebirdSQL\jaybird.dll;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\SOTI\MobiControl;;C:\Documents and Settings\Microtec\Mes documents\Borland Studio Projects\Bpl;C:\PROGRA~1\FICHIE~1\ORACLE\BIN
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
C:/Sun/Creator2ea2/java/lib/tools.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/appserv-rt.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\activation.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\admin-cli.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-admin.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-cmp.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-env.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-ext.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-jstl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-upgrade.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\commons-launcher.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\commons-logging.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\dom.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\driveradapter.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\j2ee-svc.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\j2ee.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jax-qname.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxr-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxr-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxrpc-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxrpc-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jdic_0_9.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jmxremote.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jmxremote_optional.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jsf-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jsf-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\mail.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\PEtray.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\relaxngDatatype.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\rmissl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\saaj-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\saaj-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smbase.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smdb2.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\sminformix.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smoracle.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smresource.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smspy.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smsqlserver.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smsybase.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smutil.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xalan.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xercesImpl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xsdlib.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/Creator2ea2/SunAppServer8/imq/lib/jaxm-api.jar;C:/Sun/Creator2ea2/SunAppServer8/imq/lib/fscontext.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/ant/lib/ant.jar;C:/Sun/Creator2ea2/SunAppServer8/pointbase/lib/pbclient.jar;C:/Sun/Creator2ea2/SunAppServer8/pointbase/lib/pbembedded.jar
com.sun.rave.tray.RavePEMain
start
display
native|#]
*** EXITING ERROR:
Can't create Java VM
***
Maybe you are looking for
-
How do I download Mountain Lion onto my other iMac, after the initial install?
I am wondering how to download Mountain Lion onto my second iMac, after the initial install. I understand the purchase is for multiple computers, but I have completed the install on my first iMac.
-
Itunes 11 has messed up the menu
I had Crystal Black installed previously and after the itunes 11 update I have essentially lost the menu bar completely. See the attached screenshot. Any ideas other than a complex reinstall of itunes? Roland
-
How do I delete an accidental workspace in TFS on Visual Studio Online?
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I can't get this thing to do anything. It is KEEPING A HOLD of my files in VS2013 and I can't get them back!!!!!!!!!!!!!!!!!!! HHHHHEEEELLLLPPPP!!!! I want to get rid of THIS STUPID VS
-
Want to select DAQ for my application
Hi friends, I am newbie to labview.. I am doing a project in which I have to measure the ball valve position.. for this I have attached ring magnet below the ball. when the ball rotates the magnet rotates along with ball and by using hall sensor we c
-
BW..No more storage space available for extending an internal Table
Hi; In function module - RSAR_TRFC_DATA_RECEIVED During Data loading from ERP to BW client am getting an error in SM58 in ERP as ""No more storage space available for extending an internal Table "". There is a dump in BW system TSV_TNEW_PAGE_ALLOC