Karnel task taking too much Real Memory & Battery not lasting long.

Hello,
I've noticed under my Activity Monitor that Karnel_Task is taking too much "real memory".
Also, I just bought a new battery because the original that came with my computer was dying too fast.
Well, this new one lasts just a little longer. I believe that is something else that is eating up the battery.
I have a Macbook Pro 13' early 2011.
4 GB at the Moment.
Running Mountain Lion.
Processor 2.3 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Serial Number C17F4LJHDH2G
Software OS X 10.8.5 (12F45)
Here is my Etre Check as well. I need help figuring out what is wrong with my laptop and what to do to fix it please.
Problem description:
Karnel_Task taking a lot of Real Memory.
Battery doesn’t last long.
EtreCheck version: 2.0.11 (98)
Report generated November 14, 2014 12:19:02 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 12 days 12:24:55
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (229.85 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.avid.driver.firewire.00family (11.1.0 - SDK 10.7) Support
[not loaded] com.digidesign.fwfamily.driver (9.0f4) Support
[loaded] com.digidesign.iokit.DigiDal (10.3.7f41 - SDK 10.6) Support
[not loaded] com.digidesign.mbox2.boot.driver (10.3.5f211 - SDK 10.6) Support
[not loaded] com.digidesign.mbox2.driver (10.3.5f211 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) Support
[loaded] com.serato.usb.kext (2.3.0) Support
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) Support
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
EyeConnect: Path: /Library/StartupItems/EyeConnect
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.rcd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] com.avid.00family.helper.plist Support
[loaded] com.google.keystone.agent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.avid.bsd.ShoeTool.plist Support
[running] com.digidesign.fwfamily.heler.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
User Launch Agents: ℹ️
[running] com.amazon.music.plist Support
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[running] com.genieo.completer.update.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
TWC-WiFi Menu UNKNOWN (missing value)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
DirectorShockwave: Version: 12.0.3r133 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
Omnibar
Audio Plug-ins: ℹ️
SeratoVirtualAudioPlugIn: Version: 1.0.11 Support
Avid CoreAudio: Version: 10.3.7.296 - SDK 10.6 Support
Digidesign CoreAudio: Version: 9.0 Support
3rd Party Preference Panes: ℹ️
Avid 003 Family Support
DigidesignMbox2 Support
EyeConnect
Flash Player Support
Growl Support
SwitchResX Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Esli's G-DRIVE Mini [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      8% mds
      6% Google Chrome
      2% hidd
      2% WindowServer
      1% activitymonitord
Top Processes by Memory: ℹ️
185 MB Google Chrome
116 MB mds
90 MB Finder
79 MB Google Chrome Helper
47 MB WindowServer
Virtual Memory Information: ℹ️
290 MB Free RAM
2.13 GB Active RAM
763 MB Inactive RAM
1.11 GB Wired RAM
280.50 GB Page-ins
4.74 GB Page-outs

Similar Messages

After updating to 6.1.2 why is my battery not lasting long ?

after updating my 4s why is my battery not lasting long ?

Go to this post for more information about it:
https://discussions.apple.com/thread/4611529

Battery not last longer

Battery not last longer

I have had it stop sending/receiving calls 3 times now... the first two times the problem went away the next day, but this time I am two days out and still not working.
I have not replaced my phone, I am afraid to do it because from another thread that I read, it usually doesn't fix the problem.
Here is the other thread I found: I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.
My problem started on day 15 so I couldn't just get a replacement at the store, had to get a rma to get a replacement. If you have only had the phone for 3 days you might want to go to your store and have them replace it with a new one. Me, if I could I would switch to another phone, but it looks like I am stuck with the S5 for now.

IPhone 4s battery not lasting long even on standby

For last 2 days now my iPhone hasn't been holding its charge, even in standby mode.
I took screen shots of it earlier and at 5:54am whilst in work the battery was at 82% then it stayed in standby in my pocket until the next screenshot I took and the percentage was falling fast, by 9:28 the percent was at 1.
Does anyone here know if there is anything I can do? I have restored the iPhone and also let the battery charge up to 100% from no charge in it and to no avail!
The phone is only a month and a half old and nothing has changed since the last 2 days so hard to understand why it has started doing this, brightness has always been at 100% so that's not affecting it.
I would go to an apple store to ask but closest one is 160 miles away :(
Many thanks for any help!

Oracle taking too much memory in Linux

Hi.. I am using Oralce on linux 7.5
No any active session is running on server for oracle ..
But oracle taking too much memory in linux when I check with TOP command ..
16:08:29 up 19 days, 20:14, 2 users, load average: 5.32, 4.63, 3.78
227 processes: 226 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: cpu user nice system irq softirq iowait idle
total 2.5% 0.0% 2.9% 0.4% 0.0% 91.8% 2.2%
cpu00 3.8% 0.0% 3.8% 0.0% 0.0% 92.2% 0.0%
cpu01 0.4% 0.0% 0.0% 0.0% 0.0% 99.5% 0.0%
cpu02 0.8% 0.0% 4.7% 1.7% 0.0% 85.7% 6.8%
cpu03 5.1% 0.0% 3.0% 0.0% 0.0% 89.6% 2.1%
Mem: 8203404k av, 8186192k used, 17212k free, 0k shrd, 7292k buff
6266516k actv, 1275016k in_d, 136704k in_c
Swap: 6289384k av, 10528k used, 6278856k free 7602904k cached
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND
6224 oracle 15 0 1007M 1.0G 998M D 0.0 12.5 30:45 1 oracle
10628 oracle 15 0 1000M 998M 998M S 0.0 12.4 0:16 0 oracle
6230 oracle 15 0 945M 945M 943M S 0.0 11.7 82:33 1 oracle
10188 oracle 15 0 944M 942M 931M S 0.0 11.7 3:02 1 oracle
19128 oracle 15 0 909M 901M 899M S 0.0 11.2 2:49 2 oracle
6864 oracle 15 0 886M 886M 877M S 0.0 11.0 6:12 3 oracle
18586 oracle 22 0 883M 882M 880M D 1.9 11.0 1:15 0 oracle
6870 oracle 15 0 433M 432M 431M S 0.0 5.4 0:21 2 oracle
6421 oracle 15 0 337M 336M 335M S 0.0 4.2 1:07 2 oracle
8478 oracle 15 0 272M 271M 269M S 0.0 3.3 0:12 1 oracle
18250 oracle 15 0 256M 255M 252M S 0.0 3.1 0:38 0 oracle
6876 oracle 15 0 251M 250M 249M S 0.0 3.1 1:03 0 oracle
17926 oracle 15 0 225M 224M 223M S 0.0 2.8 0:01 1 oracle
19320 oracle 15 0 197M 196M 195M S 0.0 2.4 0:23 1 oracle
18116 oracle 15 0 168M 167M 165M S 0.0 2.0 0:04 2 oracle
19596 oracle 15 0 159M 158M 155M D 2.2 1.9 0:17 0 oracle
6228 oracle 15 0 156M 155M 142M S 0.0 1.9 12:05 1 oracle
18902 oracle 15 0 81612 71M 48364 S 0.0 0.8 3:07 3 oracle
19286 oracle 15 0 48420 46M 46412 S 0.0 0.5 0:03 0 oracle
6222 oracle 15 0 41496 40M 39684 S 0.0 0.4 9:38 3 oracle
19602 oracle 15 0 40324 38M 38164 S 0.0 0.4 0:00 2 oracle
5962 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 1 mysqld
5963 mysql 15 0 39168 38M 88 S 0.0 0.4 0:08 0 mysqld
5964 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5965 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5966 mysql 25 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5967 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5969 mysql 15 0 39168 38M 88 S 0.0 0.4 2:16 2 mysqld
5970 mysql 15 0 39168 38M 88 S 0.0 0.4 2:31 1 mysqld
5971 mysql 24 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
5972 mysql 20 0 39168 38M 88 S 0.0 0.4 0:00 0 mysqld
6868 oracle 15 0 27312 26M 15204 S 0.0 0.3 8:21 3 oracle
19554 oracle 15 0 20920 19M 18192 S 0.0 0.2 0:00 3 oracle
6874 oracle 15 0 16904 16M 15400 S 0.0 0.2 1:15 1 oracle
19444 oracle 15 0 13636 12M 12004 S 0.0 0.1 0:00 1 oracle
19442 oracle 15 0 12964 12M 11324 S 0.0 0.1 0:00 1 oracle
19474 oracle 15 0 12708 12M 11076 S 0.0 0.1 0:00 2 oracle
Why oracle taking too much memory?
Any solution for this bec of that my updation takes too much time .
Edited by: harshalpatil on Oct 13, 2008 4:11 PM

Harsh,
1) What version of Oracle you running on 7.5 release of linux?
2)How did you come to the conclusion that because of this, your update is slow?
Cheers
Aman....

Agent taking too much memory...

Hello all,
i am on hp-ux itanium. I have OMS(11.1) and agent running on this box. And for some reason the oracle process is taking too much memory. From the glance cmd at OS level, we get the below...Why is java taking some much memory...the only thing running on this box is OMS, agent, the repository DB and one other DB. This machine is 16gb of memory. Any idea where i can start digging to figure out why so much memory is being taken by java and emagent process ??? is that normal ?
java               25200 oracle        2.1    97   0.0   760.4mb   1.80gb SLEEP
emagent            27769 oracle        1.0    26   0.0   306.9mb   4.43gb SLEEP
java               24951 oracle        0.2    47   0.0   479.7mb   1.73gb SLEEP
ora_smco_RCA       24966 oracle        0.0     1   0.0   112.5mb 172.2mb SLEEP

Hi user;
Pelase see:
How To Effectively Investigate & Diagnose Grid Control Agent High Memory Utilization Issues? [ID 1092466.1]
11g Grid Control Agent Consumes High Virtual / Resident Memory and may Restart Frequently [ID 1194748.1]
Hope it helps,
Regard
Helios

Sites Taking too much time to open and shows error

hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.

This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful.

Taking too much time (1min) to connect to database

Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
Naseer

Dear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C

I having issue with my Iphone 4 while playing music its taking too much time to play

I am using Iphone which is taking too much time to play music & some time its shows one album cover and playing others song please help and let me know whats the issue

Hello Sanjay,
I would recommend steps 1, 3, and 5 from our iPhone Troubleshooting Assistant found here: http://www.apple.com/support/iphone/assistant/phone/#section_1
Here is step 1 to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
Take care,
Sterling

Hi, My I-phone taking too much time to get charge

Hi, My I-phone taking too much time to get charge... I am charging through computer. It does not show whether its charging or not. Morning it was 40% , till now it 60 % after that it never moved...I have switched off my mobile and charging but percentage has moved to only 60%... I am charging from morning 9:00...its 1:30 still 60%....Please help

If you have the original battery in your iPhone 3G, it may have reached the end of it's useful life. You can contact Apple about a replacement battery. It may also be that the USB port on your computer doesn't put out enough power. Try charging the phone from a wall outlet.

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

Job is taking too much time during Delta loads

hi
when i tried to extract Delta records from R3 for Standard Extractor 0FI_GL_4 it is taking 46 mins while there are very less no. of delta records(193 records only).
PFA the R3 Job log. the major time is taking in calling the Customer enhacement BW_BTE_CALL_BW204010_E.
please let me know why this is taking too much time.
06:10:16 4 LUWs confirmed and 4 LUWs to be deleted with FB RSC2_QOUT_CONFIRM_DATA
06:56:46 Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 193 records
06:56:46 Result of customer enhancement: 193 records
06:56:46 Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 193 records
06:56:46 Result of customer enhancement: 193 records
06:56:46 Asynchronous sending of data package 1 in task 0002 (1 parallel tasks)
06:56:47 IDOC: InfoIDOC 2, IDOC no. 121289649, duration 00:00:00
06:56:47 IDOC: Begin 09.05.2011 06:10:15, end 09.05.2011 06:10:15
06:56:48 Asynchronous sending of InfoIDOCs 3 in task 0003 (1 parallel tasks)
06:56:48 Through selection conditions, 0 records filtered out in total
06:56:48 IDOC: InfoIDOC 3, IDOC no. 121289686, duration 00:00:00
06:56:48 IDOC: Begin 09.05.2011 06:56:48, end 09.05.2011 06:56:48
06:56:54 tRFC: Data package 1, TID = 3547D5D96D2C4DC7740F217E, duration 00:00:07, ARFCSTATE =
06:56:54 tRFC: Begin 09.05.2011 06:56:47, end 09.05.2011 06:56:54
06:56:55 Synchronous sending of InfoIDOCs 4 (0 parallel tasks)
06:56:55 IDOC: InfoIDOC 4, IDOC no. 121289687, duration 00:00:00
06:56:55 IDOC: Begin 09.05.2011 06:56:55, end 09.05.2011 06:56:55
06:56:55 Job finished
Regards
Atul

Hi Atul,
Have you written any customer exit code . If yes check for the optimization for it .
Kind Regards,
Ashutosh Singh

Why is query taking too much time ?

Hi gurus,
I have a table name test which has 100000 records in it,now the question i like to ask is.
when i query select * from test ; no proble with responce time, but when the next day i fire the above query it is taking too much of time say 3 times.i would also like to tell you that everything is ok in respect of tuning,the db is properly tuned, network is tuned properly. what could be the hurting factor here ??
take care
All expertise.

Here is a small test on my windows PC.
oracle 9i Rel1.
Table : emp_test
number of records : 42k
set autot trace exp stat
15:29:13 jaffar@PRIMEDB> select * from emp_test;
41665 rows selected.
Elapsed: 00:00:02.06 ==> response time.
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=24 Card=41665 Bytes=916630)
1 0 TABLE ACCESS (FULL) OF 'EMP_TEST' (Cost=24 Card=41665 Bytes=916630)
Statistics
0 recursive calls
0 db block gets
2951 consistent gets
178 physical reads
0 redo size
1268062 bytes sent via SQL*Net to client
31050 bytes received via SQL*Net from client
2779 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
41665 rows processed
15:29:40 jaffar@PRIMEDB> delete from emp_test where deptno = 10;
24998 rows deleted.
Elapsed: 00:00:10.06
15:31:19 jaffar@PRIMEDB> select * from emp_test;
16667 rows selected.
Elapsed: 00:00:00.09 ==> response time
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=24 Card=41665 Bytes=916630)
1 0 TABLE ACCESS (FULL) OF 'EMP_TEST' (Cost=24 Card=41665 Bytes=916630)
Statistics
0 recursive calls
0 db block gets
1289 consistent gets
0 physical reads
0 redo size
218615 bytes sent via SQL*Net to client
12724 bytes received via SQL*Net from client
1113 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
16667 rows processed

Server0 process taking too much time

Hi All,
Once i start the Netweaver server, the server) process taking too much time.
When i was installed Netweaver that time 13 min, after 2 months 18 min.. then 25 min now it is taking 35 minutes.... to become green color.
Why it is taking too much time, what might be the cause.....
Give some ideas to solve this problem..............
The server0 developer trace has this information continuously 6 to 7 times...
[Thr 4204] *************** STISEND ***************
[Thr 4204] STISEND: conversation_ID: 86244265
[Thr 4204] STISEND: sending 427 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STISEND: send synchronously
[Thr 4204] STISEND GW_TOTAL_SAPSEND_HDR_LEN: 88
[Thr 4204] NiIWrite: hdl 0 sent data (wrt=515,pac=1,MESG_IO)
[Thr 4204] STIAsSendToGw: Send to Gateway o.k.
[Thr 4204] STIAsRcvFromGw: timeout value: -1
[Thr 4204] NiIRead: hdl 0 recv would block (errno=EAGAIN)
[Thr 4204] NiIRead: hdl 0 received data (rcd=3407,pac=2,MESG_IO)
[Thr 4204] STIAsRcvFromGw: Receive from Gateway o.k.
[Thr 4204] STISEND: data_received: CM_COMPLETE_DATA_RECEIVED
[Thr 4204] STISEND: received_length: 3327
[Thr 4204] STISEND: status_received: CM_SEND_RECEIVED
[Thr 4204] STISEND: request_to_send_received: CM_REQ_TO_SEND_NOT_RECEIVED
[Thr 4204] STISEND: ok
[Thr 4204] STIRCV: new buffer state = BUFFER_EMPTY
[Thr 4204] STIRCV: ok
[Thr 4204] *************** STSEND ***************
[Thr 4204] STSEND: conversation_ID: 86244265
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STSEND: new buffer state = BUFFER_DATA
[Thr 4204] STSEND: 106 bytes buffered
[Thr 4204] *************** STIRCV ***************
[Thr 4204] STIRCV: conversation_ID: 86244265
[Thr 4204] STIRCV: requested_length: 16000 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STIRCV: send 106 buffered bytes before receive
[Thr 4204] STIRCV: new buffer state = BUFFER_DATA2
[Thr 4204] *************** STISEND ***************
then
[Thr 4252] JHVM_NativeGetParam: get profile parameter DIR_PERF
[Thr 4252] JHVM_NativeGetParam: return profile parameter DIR_PERF=C:\usr\sap\PRFCLOG
this message continuously
Can i have any solution for the above problem let me know .
Thanks & regards,
Sridhar M.

Hello Manoj,
Thanks for your quick response, Previously the server has 4GB RAM and now also it has same.
Yesterday i found some more information, like deployed(through SDM) applications also take some memory at the time of starting the J2EE server...Is it right?
Any other cause...let me know
Thanks & Regards,
Sridhar M.

Uploading Taking too much Time

Hi all,
I am uploading my video files from client computer to server, the server has 1 tera byte storage, 500 GB is free. It is taking too much time to get uploaded. even there is no other computer connected. only one client and a server. the left pane "jobs in progress" is shown and never ends.
what should be the possible reason for that.
Junaid
Broadcast Engineer

Our server FCS was hellishly slow, to the point where are producers never used it as it would take them forever to upload their capture scratches.
We recently installed a Fiber network with an Xsan and switched all of the producers over to that network. Now it is just as fast (if not faster) than using an external USB/FireWire drive. Now the only challenge is to get them to use FCS again...
But really, if your on a 10/100 network then you might as well not use FCS for any type of real movie editing. Even on our 10/100/1000 network it was still slow enough to make everyone hate using FCS. So if you are planning on using FCS on a wide-scale deployment, prepare to shell out some cash for Fiber.

Karnel task taking too much Real Memory & Battery not lasting long.

Similar Messages

Maybe you are looking for