Kaspersky causing error 0xe8000001

Hi all,
Just thought I'd post this as it caused me no end of trouble and I spent ages looking for the solution.
I kept experiencing 0xe8000001 and being told iTunescould not connect due to an unknown error.
Eventually found out that one of the settings in Kaspersky Internet Security was blocking the connection to the iPhone.
By going to Kaspersky, going to "settings", "Advanced settings" and "Network", you can uncheck the "Scan Encrypted Connections" tab which will allow iTunes and your device to connect.
Hope this helps some people avoid the headache I had!

Also explained here: iTunes for Windows: Troubleshooting security software issues

Similar Messages

Rebellious iPhone (Error 0xE8000001)

I've been searching through a few threads discussing this issue, and there doesn't seem to be a definite answer yet. Here's this issue:
Issue:
My iPhone does not want to stay connected to my computer for more than 20-30 minutes at a time. Which is a problem, because sometimes I wake to find that my battery was not charging overnight like it should have. I get one of two error messages:
http://www.liberateart.com/error1.png
http://www.liberateart.com/error2.png (Unknown Error 0xE8000001)
*What I Know*
Searching for answers, I've heard this error is causes by USB ports. I have a brand new 20" iMac 2.4, with three USB 2.0 ports. I've tried every port (even the ones on my keyboard, which I know you're not supposed to do, but no luck), and I still get it disconnecting.
*What I've Tried*
Plugging it into every USB port and seeing if it does the same thing. Yep, every single one.
Restoring the iPhone (twice actually).
Reinstalled iTunes.
Updated all my software.
*What I Have*
iMac (Late 2007) 20" 2.4 Intel Core Duo
OSX 10.5.2
iPhone 1.1.4
iTunes 7.6.1
No USB Hubs
Anyone have any thoughts was might be causing this, or any possible solutions? My last resort is to do a clean erase and install, but I'm dreading to do it. If it's hardware, I don't want to end up with the same error message after doing a clean erase and install.
Any advice would be greatly appreciated. Thank you!

This has happened to me as well with both my iPhone and iPod Touch, let me show you a few things that may help resolve this problem, if one of these doesn't work try the next one, at least one should work!
1: In November last year I had iTunes (Version 7.5), what I did for my iPhone to work is I downgraded my iTunes version to Version 7.4 and it worked just fine. This is a link to download iTunes 7.4 if you like: http://itunes.brothersoft.com/itunes7.4, please note that it says for Windows Vista, XP, 2003, XP64, ignore that because I run Mac and it downloaded.
2: Go into "Activity Monitor" and force quit iTunes helper then replug the iphone in another USB drive and reopen iTunes.
3: Turn off your iPhone and restart your Mac, then once restarted go into iTunes and turn on your iPhone.
4: You don't have a hub, but if your friends do you could borrow it and that may work.
5: Delete then re-install iTunes Delete the following files:
The iTunes application (located in /Applications)
com.apple.iTunes.plist (from ~/Library/Preferences)
iTunes.pkg (from /Library/Receipts)
iTunesX.pkg (from /Library/Receipts)
After that re-install the LATEST version of iTunes which is found on the apple website.
I hoped this information helped!

Bug Report : Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error. "Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

Premiere CC 2014.1 Blu-ray MPEG 2 export causing error in Sony DVD Architect Pro

I've filed a Bug Report for this but wanted to post here in case it helps anyone else or on the off chance someone can give me a solution / better work around.
Something has changed in the results of a Blu-ray MPEG2 export from Premiere 2014.1 vs those of the previous CC version. The result is that my authoring software of choice, Sony DVD Architect Pro, fails to prepare a disc image giving an error in the final stage of preparation. This workflow has been working fine for 2-3 years.
My work around is to export to original format (mxf / XDCAM EX HQ) and then go back to Media Encoder CC rather than 2014 to produce the Blu-ray MPEG2 file, which works without problem.
Here's a copy paste of my bug report in case anyone with a similar setup has an opportunity to replicate (I'd be very grateful to anyone able to confirm whether its a bug or something specific to me that I might be able to fix).
******BUG******
Export from Premiere 2014.1 directly or via Media Encoder of MPEG 2 1080 50i Blu-ray files causes error in preparation of Blu-ray disc in Sony DVD Architect 5.2.
This error does not occur when using the same Media Encode export preset in the previous version of Premiere Pro CC / Media Encoder.
Steps to reproduce bug:
1. Export Sequence from Premiere
Export, in my case XDCAMEX 1080i HQ, using a media encoder MPEG 2 Blu-ray preset:
Preset Name: HD 1080i 25
Format: MPEG2 Blu-ray
Bitrate Settings: Medium (Target 25Mbps)
2. Create DVD Architect 5.2 project
Set up as single movie Blu-ray project in DVD Architect:
Disc format: Blu-ray Disc
Resolution: 1920*1080
Framerate: 35 interlaced
Choose the file exported from Premiere
3 Prepare Disc
- Select Make Blu-ray Disc
- Click Prepare
- Choose Location of iso
- click next then finish
Result
Around 50% - 60% through the process the following error is displayed:
An error occurred while preparing compilation
Details:
File name: STREAM/00000.m2ts
Status: TSWrapper.dll::CTSWrapper::ProcThreadMain::Failed to read ES file. - The ES file may be shorter than the size described in the MUI file.
Expected results:
A shiny ISO ready to be burnt to disc and sent sent to eager customers.
Its taken me a full day and a half to isolate problem - someone remind me why I fall for the software updates every time?!
Cheers
Iain
Other details:
Windows 7 pro 64 SP1
Intel Core i7 950 @ 3.07GHz
RAM 24.0GB
ASUSTeK P6T DELUXE V2
1279MB NVIDIA GeForce GTX 470

There is a known bug in the H.264-Bluray export. I assume it has nothing to do with your issue, but perhaps it will give you something to consider.
https://forums.adobe.com/message/6848505#6848505
It appears due to a malformed xmpses file. It creates a problem on import into Encore, and I think it should do the same upon import into Architect or it would be ignored entirely. The test is to delete the xmpses file and see if that avoids the issue.

Changes in RPCBURZ0 causes errors in other programs

Hello to All,
I made changes to RPCBURZ0 in order to extend the TABLE schema function to read a custom Infotype 9001.
I added the necessary code in RPCBURZ0 and the data definition in RPCFDCZ0.
The code is working perfectly , but the changes are causing errors in other country specific reports
specifically in : HINCALC0 , HCNCALC0 , and HKRCALC0 and Transports to Quality generating errors.
Error is because the custom infotype definition is not seen in these reports.
Generation of the users of the transported Includes                                                                                |
Program HCNCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HINCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HKRCALC0, Include RPCBURZ0: Syntax error in line 000021
       |   The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Looking at other H--CALC0 reports i could easily spot an include for RPCFDCZ0.
include rpcfdcz0. "customer-specific data declaration (int'l)
I wonder why this include is not in (HINCALC0 , HCNCALC0 , and HKRCALC0) !!!
I have two solutions in mind :
1. Make a custom ZRPCBURZ0 and include it in the main report.
2. Look for user exist for the three reports and add the data definition statement .
What is the best way to fix this situation ? and is there any other possible solutions ?
We are using :
   SAP ECC 6.0
   Payroll International Driver.

Alex Gorly and Matt Sullivan solved one of my issues above:
Message: Attribute 'prod' is not declared for element 'prodname'
I'm still stumpled on the other one:
Message: Not enough elements to match content model '(prodname,vrmlist,((brand|component|featnum|platform|prognum|series) )*)'
As stated above, I've even removed everything from the general rule of <prodinfo> except prodname and I'm still getting the same error. I've searched everywhere for this general rule and <prodinfo> is the only place I can find it.
What I really want is: (prodname), (vrmlist)?, (brand | component | featnum | platform | prognum | series)*
so that vrmlist is optional.
No matter what I do, unless I include a vrmlist, I get the above message. Currently, our CMS can't handle vrmlist but I don't want to remove it altogether because we may be replacing our CMS.
Help please!

100% CPU Usage, Sound configuration Error and Unknown Error (0xE8000001)

Hi, I just bought a iPod Touch - amazing iPod I must say.
Pluged it in to my Windows Xp to sync some music. (I've been using iTunes for several years now and just upgraded from a 1st generation iPod nano to a 16 Gb touch).
It connected very well and I was ready to sync but then I made a stupid mistake - I updated iTunes to be sure that every thing was up to date.
After the update I get an error about my sound configuration (I've tried uninstalling QuickTime and installing again - didn't work). iTunes open up and starts to sync and now a second issue apears. It uses all of my CPU - flatlinig at 100%, so I cannot use my computer at all. It is now syncing but extremely slow - one song takes about a minute. Now the iPod touch starts to say these weird sounds and rebooting every 20 seconds or so. Finally I get an eroor in iTunes saying that there has been an unknown error (0xE8000001).
So I'm stuck with iTunes not working and no songs on my iPod.. :o(
What to do..?

Hi, I just bought a iPod Touch - amazing iPod I must say.
Pluged it in to my Windows Xp to sync some music. (I've been using iTunes for several years now and just upgraded from a 1st generation iPod nano to a 16 Gb touch).
It connected very well and I was ready to sync but then I made a stupid mistake - I updated iTunes to be sure that every thing was up to date.
After the update I get an error about my sound configuration (I've tried uninstalling QuickTime and installing again - didn't work). iTunes open up and starts to sync and now a second issue apears. It uses all of my CPU - flatlinig at 100%, so I cannot use my computer at all. It is now syncing but extremely slow - one song takes about a minute. Now the iPod touch starts to say these weird sounds and rebooting every 20 seconds or so. Finally I get an eroor in iTunes saying that there has been an unknown error (0xE8000001).
So I'm stuck with iTunes not working and no songs on my iPod.. :o(
What to do..?

Code 91 - Caused Error: (Object variable or With block variable not set)

Hi,
We are using FDM 9.3.1. We have enabled batch processing.
We are having following process being followed
- Batch Loader script will pull the data from dwh table for each entity, scenario, year and period
- Batch processing is set to serial and processlevel set to Up-To-Check
- We had following five files created for Location - EMAFF100
i. 1_EMAFF100_ACT_May-2011_RR.txt
ii. 1_EMAFF100_ACT_Jun-2011_RR.txt
iii. 1_EMAFF100_ACT_Jul-2011_RR.txt
iv. 1_EMAFF100_ACT_Aug-2011_RR.txt
v. 1_EMAFF100_ACT_Sep-2011_RR.txt
Batch loader process completed the processing for May - 2011, Jul - 2011, Aug-2011, Sep-2011.
But for Jun 2011 it has given the following error in the 'tbatchinformation' table and failed at import stage.
40751.6239236111 1_EMAFF100_ACT_JUN-2011_RR.TXT 2 2 91-Object variable or With block variable not set
When we checked the view error log from tool menu we found following
** Begin FDM Runtime Error Log Entry [2011-07-27-14:58:29] **
ERROR:
Code......................................... 91
Description.................................. File [1_EMAFF100_ACT_Jun-2011_RR.txt] Caused Error: (Object variable or With block variable not set)
Procedure.................................... clsBatchLoader.mFileCollectionProcess
Component.................................... upsWBatchLoaderDM
Version...................................... 931
Thread....................................... 5600
IDENTIFICATION:
User......................................... ncreighton
Computer Name................................ HYAPSDEV1
App Name..................................... EMATTEST
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ hydev_serv
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... EMAFF100
Location ID.................................. 762
Location Seg................................. 16
Category..................................... ACT
Category ID.................................. 13
Period....................................... Jun - 2011
Period ID.................................... 30/06/2011
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... False
Is Auditor................................... False
We then re submitted data for Jun period and saw batch process got successfully completed and June data got imported successfully and also rest other processes got through.
Can any one provide exact cause for this error? As we have automated the data load from DWH to FDM And then to HFM. Hence when such error comes it disturbs lot of processing there on. Appreciate your early response.
Thanks in advance.

Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch

How fix iPhone encountered unexpected error 0xE8000001 install phase?

Please help ( if there is an iPhone developer forum somewhere please redirect me)!
I can not get even the sample "Hello World" application to download and run on my iPhone device. I have spent hours googling and messing around in the iPhone Developer Program Portal trying to figure out where I went wrong. I get the following error after I build and run:
"Your mobile device has encountered an unexpected error 0xE8000001 during the install phase: Verifying application"
"Try disconnecting and powering off"
Any tips, resources, or advice is much appreciated. I about to the point to consider wiping and reinstalling my Mac in a hope it may improve whatever I did wrong between SDK1-8.
Thanks in advance,
-Ed

Thank you _very much_ for looking at my "Bundle identifier" syntax. I think I am getting closer. I removed the 10-digit prefix from the Info.plist "*Bundle identifier*" setting. My setting is now entered as seen below.
"*myapp.com.mycompany.${PRODUCT_NAME:identifier}*"
My new challenge is that when I build-and-go it displays the following message in the bottom-left:
"*Failed to start remote debugserver for (null) on Ed's Phone*"
Any advice is much appreciated and I appreciate all others who have added comment to this thread.
-Ed
For others that are having similar problesm, you can now print out the portal "How to" adventure game. On the portal home page is a link to the following PDF. I am planning on printing out and reading the whole thing and high-lighting all the important bits and steps.
http://adcdownload.apple.com/iphone/iphone_developer_program_user_guide/iphone_d eveloper_program_user_guide__standard_program.pdf
*A tip to check if you have a valid "Code Signing Identity" installed and entered in your project Build settings.*
1 - Select the root folder in your code project
2 - Press the "i" info icon on the tool bar
3 - Go to the *Build* tab
4 - The format of Code *Signing Identity->Any iPhone OS Device* setting is case sensitive and looks like: "*iPhone Developer: John Doe*"
5 - If it is correct, the associated provisioning profile will appear in the drop-down list of the Code Signing *Provisioning Profile->Any iPhone OS Device* setting. If you mess it up, do it intentionally by try adding an extra character, you should see the provisioning profile disappear from the list. If you see no change, you may have a bad developer name(wrong case?) or provisioning profile or profile install problem.

2.2 + error (0xE8000001)

Hi,
Earlier today i just got my app loaded onto my iPhone (running 2.2). I was going back and forth testing, no problem. All of a sudden, when I try to Build and Run, I get an error:
"Your mobile device has encountered an unexpected error (0xE8000001)"
"Try disconnecting and powering off the device; then power the device on and reconnect it."
Ok so this was just working fine, and of course I tried the old reboot, no luck. I even reinstalled my provision and everything. When XCode is trying to move the application over to the phone, it does print two lines in the logs:
Tue Dec 2 15:05:21 unknown afcd[73] <Error>: user mobile has uid 501
Tue Dec 2 15:05:21 unknown afcd[73] <Error>: mode is 0x41e8
Anyone else getting this? Seems like there are some guides for 2.1, but Apple has changed things with 2.2. It also seems like this process is plagued with difficulties! I guess I'll just keep playing with it for now as I've already gone through the guide Apple provided several times.
Thanks

I recreated my provisioning profiles (dev and ad-hoc) then created an entirely new project with a different name. Copied all my files to the new project and set everything up. (bit of a sledge hammer approach) I installed on my device with the debug build using my dev provisioning profile and it installed fine. I deleted it and reinstalled and it was fine.
The next thing I did was try to install my beta build with the ad-hoc provisioning profile overtop of the existing debug/dev build on my device. Once I did this, I was back to the original errors (0xE8000001, 501, 0x41e8)
@markww We you attempting anything similar? (installing on top of an existing app with a different build/provisioning profile?)
Anyone see an obvious flaw in what I did or any solutions? Thanks!
Message was edited by: bjtylerx

Why sys_extract_utc(sysdate) never causes error in pl/sql block?

Oracle 11.2
I cannot use
SELECT sys_extract_utc(sysdate) FROM DUAL But I can use
v := sys_extract_utc(sysdate)in a procedure or a trigger without causing any compile or run-time error.
In my opinion, the return value of function sysdate doesn't contain any timezone info, so it should not be able to be used as the parameter of function sys_extract_utc, because it needs timezone info to do the conversion.
Any clues?
Thanks in advance.

Kiran wrote:
use systimestamp it will contain timezone.I know, what I don't know is why sys_extract_utc(sysdate) can be used in procedure without causing any error. It should cause error, right?

Reports Background Engine caused error and had to be closed

"Reports Background Engine caused error and had to be closed"
we are encountering this error when trying to run any report on some machines.with windows 2000.
we tried to login (on the machines having problems) using another windows user,
sometimes it works and sometimes not.
we also tried to reinstall the reports runtime and it never worked.
we have developer 6i, Oracle database 10g express edition.
Does anyone have a solution to this random problem ?
Thanks

dear all
you can pass parameter from form to report to close report server after close report
add_parameter(pl_id, 'oracle_shutdown',text_parameter, 'Yes');
then it will be ok
good luck
Message was edited by:
nim
Message was edited by:
nim

Deleting iMovie files & exported movies causes errors in all of iLife

I just went through quite an ordeal...
In an attempt to clean up some space, I deleted a bunch of my iMovie project files and movies after backing them up (files in the default Movies folder). I have deleted iMovie projects before with no issues.
This time, it caused errors in iDVD, iMovie, and iPhoto...it would say: "Connection failed. The server may not exist or it is not operational at this time. Check the server name or IP address and try again." It would say this over and over and over again and often completely hang up my application so that I would have to force quit. This would repeat itself over and over...
I read about this in other forums and erased .plist files in User > Library, etc...This solved the problem for other people, but it kind of made it worse for me. Long story short, I ended up having to restore from Time Machine my entire system just to get iLife working again... I also searched for Aliases and externally referenced libraries or files, and I do not have any.
So now I have those files again. I want to delete them again. But I'm afraid! (P.S. This may also be related to deleting the Aperture Trial Library in the Photos folder...I am also posting about that to the Aperture forum.)
Does anyone know what the deal with this is? How come before I did not have problems but am now? How do I safely delete iMovie files without having this happen again?
THANK YOU!

iMovie is a non-destructive editor, meaning that all original clips are maintained in the folder, even after editing. Until you render the movie to DVD, all the original files are still "in the background". Kind of hard for me to explain. Others here could give more technical details. You would have to delete your movie from the folder to regain all the hard drive space.
If your idea is to archive your movies, a better method is to record them back to tape. Otherwise, get an external drive to store the finished movies and then delete the original files.
One word of caution about emptying the iMovie trash. This has been known to cause problems with a work in progress and it is generally advised to leave the iMovie trash alone until your project is finished and burned to a DVD.

GROUP BY with parameter - cause error -ORA-00979: not a GROUP BY expression

I generate a query via PreparedStatement. For example:
SELECT when, value FROM test GROUP BY ?;
PrepState.toString(1, "when");
That causing error: ORA-00979: not a GROUP BY expression
My application using query like:
SELECT to_char(data,1), SUM(vlue) as sum FROM test GROUP BY to_char(data, 2);
PrepState.toString(1, "YYYY-MM");
PrepState.toString(2, "YYYY-MM");

Ah. Reproduced in the first chunk of PL/SQL below.
The second chunk is a workaround.
Basically, SQL is parsed by the syntax engine and optimizer to get an execution plan. Then you can have a sequence of "bind, execute, fetch, fetch, fetch..., bind, execute..."
Since you can have multiple binds for a single SQL parse, then the fact that the first set of binds all happen to have the same value doesn't mean the next set will.
The optimizer needs to be 100% sure that the value in the select must always be the same as the value in the group by, so you can't have two separate (and therefore potentially different) bind variable mappings. [Given the right circumstances, the optimizer might do all sorts of tricks, such as using materialized views and function-based indexes.]
Misleadingly, it actually fails on the 'EXECUTE' step of DBMS_SQL rather than the PARSE.
declare
v_sql varchar2(1000) :=
    'select to_char(created,:b1), count(*) '||
    ' from user_objects u '||
    ' group by to_char(created,:b2) '||
    ' order by to_char(created,:b3)';
v_fmt varchar2(10) := 'YYYY';
v_cur number;
v_ret_str varchar2(10);
v_ret_num number;
v_ret number;
begin
v_cur := dbms_sql.open_cursor;
dbms_sql.parse(v_cur, v_sql, dbms_sql.native );
dbms_sql.define_column_char (v_cur, 1, v_ret_str, 10);
dbms_sql.define_column (v_cur, 2, v_ret_num);
dbms_sql.bind_variable( v_cur, ':b1', v_fmt );
dbms_sql.bind_variable( v_cur, ':b2', v_fmt );
dbms_sql.bind_variable( v_cur, ':b3', v_fmt );
v_ret := dbms_sql.execute( v_cur );
WHILE ( dbms_sql.fetch_rows(v_cur) > 0 ) LOOP
    dbms_sql.column_value_char (v_cur, 1, v_ret_str );
    dbms_sql.column_value (v_cur, 2, v_ret_num );
    dbms_output.put_line('>'||v_ret_str||':'||v_ret_num);
END LOOP;
end;
declare
v_sql varchar2(1000) :=
    'select to_char(created,f.fmt), count(*) '||
    ' from user_objects u, (select :b1 fmt from dual) f '||
    ' group by to_char(created,f.fmt) '||
    ' order by to_char(created,f.fmt)';
v_fmt varchar2(10) := 'YYYY';
v_cur number;
v_ret_str varchar2(10);
v_ret_num number;
v_ret number;
begin
v_cur := dbms_sql.open_cursor;
dbms_sql.parse(v_cur, v_sql, dbms_sql.native );
dbms_sql.define_column_char (v_cur, 1, v_ret_str, 10);
dbms_sql.define_column (v_cur, 2, v_ret_num);
dbms_sql.bind_variable( v_cur, ':b1', v_fmt );
v_ret := dbms_sql.execute( v_cur );
WHILE ( dbms_sql.fetch_rows(v_cur) > 0 ) LOOP
    dbms_sql.column_value_char (v_cur, 1, v_ret_str );
    dbms_sql.column_value (v_cur, 2, v_ret_num );
    dbms_output.put_line('>'||v_ret_str||':'||v_ret_num);
END LOOP;
end;
/

Kaspersky causing error 0xe8000001

Similar Messages

Maybe you are looking for