KB Download number going DOWN after time ????

http://gallery.me.com/grifforama#100057&view=null&bgcolor=black&sel=0
These are screenshots of me trying to download a picture my wife sent to me.
If you check the times at the top of each screen, you'll see that the kb number actually goes down from 1.10pm to 1.12pm
How can this happen ?
I then switched off my phone, and turned it back on, and the picture downloaded OK.
All I ever get from ATT or Apple is to perform a restart, or to restore my phone. I even got a new sim card, but nothing seems to have helped.

My phone seems top constantly switch between 3G and Edge, on a regular basis.
However. My iphone, as shown here, was showing me 4/5 bars on 3G. At no time did it show a switch to Edge.
I am just about to upload some pictures of my collegaues phone sitting nicely on 3G, while mine sits not so happy on EDGE.
I have another call with an ATT 2nd line technician tommorrow, and I will likely try and switch my phone out for a newer one some time soon. I'm convinced this is hardware related.
Oh, and the screen shot feature is great. Helps me prove my point with Apple and ATT.

Similar Messages

IPad Retina storage is going down after ios8.02 was installed. I had over 6.4 gig before installation and am now down to less than 700 mb. I've deleted apps, there's no music or videos on my iPad, and I've deleted most pictures.

IiPad retina storage is disappearing after update to ios8.02. I had over 6.4 gig before the update. I now have less than 710 mb. There is no music or videos on the iPad. I have deleted almost all apps and most photos. Every time I use it, the storage is going down. I have tried resetting by powering off and this has no effect.

iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
What is Stored in iCloud and What is Not
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
 Cheers, Tom

Firefox installation made my power saver function misfire - the system goes down after a few minutes of inactivity but then comes right back on again after a few seconds.

My power management scheme: turn off monitor after 2 min of inactivity; turn off hard discs after 5 min of inactivity. doesn't work reliably anymore. Usually, with Firefox installed, the system powers down after the preset times but then comes right back on again after a few seconds. If I restart the machine, my selected power management scheme works properly for a few cycles but then reverts to the mode of turning back on after a few seconds after having shut down.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

VOD - application goes down after a while (only some instances)

Hello Guys,
I have a simple VOD application running on FMS 3.5.5 which I need to stream continuously but I'm unable to identify the correct configuration to do so. I removed as much limit details as I could from those XML file: Server.xml, Application.xml and VHost.xml.
Basically I have arround 15 different streams but all of sudden some of them, NOT ALL, goes down with no explanation (as I could see).
As per logs, there is no much details but "application unloaded".
Can someone pls help me to identify what else needs to be changed in order to have those stream playing continuously? Usually they went down after some hours in idle state. But I'm not sure whether it's related to CPU/Memory usage. My server has 8GB of memory, and when I start playing all those stream the memory goes down till 52mb free (50mb to 53mb usually). "All" memory is allocated to cache, and it seems there is no problem with that.
Server.xml
<Root>
 <Server>
 <NetworkingIPv6 enable="false" />
 <CrossDomainPath></CrossDomainPath>
 <Plugins>
 <UserDefined>
 <UserKey1>
 This data can be retrieved by FMS plug-in.
 Please look at Auth Adaptor sample for details.
 </UserKey1>
 <UserKey2>
 This data can be retrieved by FMS plug-in.
 Please look at Auth Adaptor sample for details.
 </UserKey2>
 </UserDefined>
 <FilePlugin enabled="true">
 <MaxNumberOfRequests>0</MaxNumberOfRequests>
 <Content type="Streams">true</Content>
 <Content type="SWF">false</Content>
 </FilePlugin>
 </Plugins>
 <SSL>
 <SSLRandomSeed>16</SSLRandomSeed>
 <SSLSessionCacheGC>5</SSLSessionCacheGC>
 <SSLClientCtx>
 <SSLVerifyCertificate>true</SSLVerifyCertificate>
 <SSLCACertificatePath></SSLCACertificatePath>
 <SSLCACertificateFile></SSLCACertificateFile>
 <SSLVerifyDepth>9</SSLVerifyDepth>
 <SSLCipherSuite>ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH</SSLCipherSuite>
 </SSLClientCtx>
 </SSL>
 <Process>
 <UID>${SERVER.PROCESS_UID}</UID>
 <GID>${SERVER.PROCESS_GID}</GID>
 </Process>
 <Mask>017</Mask>
 <LicenseInfo>${SERVER.LICENSEINFO}</LicenseInfo>
 <LicenseInfoEx></LicenseInfoEx>
 <ReadBufferSize>4096</ReadBufferSize>
 <AdminServer>
 <CrossDomainPath></CrossDomainPath>
 <RTMP>
 <RTMPE enabled="true"></RTMPE>
 </RTMP>
 <HostPort>${SERVER.ADMINSERVER_HOSTPORT}</HostPort>
 <IpcHostPort>localhost:11110</IpcHostPort>
 <SocketGC>60</SocketGC>
 <Process>
 <UID>${SERVER.PROCESS_UID}</UID>
 <GID>${SERVER.PROCESS_GID}</GID>
 </Process>
 <AdminElem>false</AdminElem>
 <Allow>all</Allow>
 <Deny></Deny>
 <Order>Allow,Deny</Order>
 </AdminServer>
 <AutoCloseIdleClients enable="false">
 <CheckInterval>-1</CheckInterval>
 <MaxIdleTime>-1</MaxIdleTime>
 </AutoCloseIdleClients>
 <ResourceLimits>
 <FLVCachePurge>60</FLVCachePurge>
 <FLVCache>
 <FileCheckInterval>120</FileCheckInterval>
 <MaxSize>${SERVER.FLVCACHE_MAXSIZE}</MaxSize>
 <MaxKeyframeCacheSize>0</MaxKeyframeCacheSize>
 </FLVCache>
 <RecBuffer>
 <MaxFlushTime>5</MaxFlushTime>
 <MaxFlushSize>256</MaxFlushSize>
 <AllowedVideoLag></AllowedVideoLag>
 <MaxSize>512000</MaxSize>
 <MaxTimestampSkew>-1</MaxTimestampSkew>
 </RecBuffer>
 <CPUMonitor>1</CPUMonitor>
 <ThreadPoolGC>20</ThreadPoolGC>
 <MsgPoolGC>60</MsgPoolGC>
 <ApplicationGC>-1</ApplicationGC>
 <FLVCacheSize>10</FLVCacheSize>
 <SocketGC>60</SocketGC>
 <ProcVMSizeMonitorInterval>60</ProcVMSizeMonitorInterval>
 <ProcVMSizeWarn>1800</ProcVMSizeWarn>
 <ProcVMSizeNominal>1600</ProcVMSizeNominal>
 <SSLSessionCacheGC>5</SSLSessionCacheGC>
 <Connector>
 <HTTP>
 <MinConnectionThreads>0</MinConnectionThreads>
 <MaxConnectionThreads>0</MaxConnectionThreads>
 <MaxConnectionQueueSize>-1</MaxConnectionQueueSize>
 <HandleCache>
 <MaxSize>100</MaxSize>
 <IdleTime>30</IdleTime>
 <TrimSize>0.2</TrimSize>
 <GCInterval>60</GCInterval>
 </HandleCache>
 </HTTP>
 <RTMP>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>32</MaxIOThreads>
 <NumCRThreads>0</NumCRThreads>
 <MinConnectionThreads>0</MinConnectionThreads>
 <MaxConnectionThreads>0</MaxConnectionThreads>
 <MaxConnectionQueueSize>-1</MaxConnectionQueueSize>
 </RTMP>
 </Connector>
 <Protocol>
 <RTMP>
 <Edge>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 <MaxConnectionRate>-1</MaxConnectionRate>
 </Edge>
 <Core>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 </Core>
 <Admin>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 </Admin>
 <SocketSndBuf>0</SocketSndBuf>
 <SocketRcvBuf>0</SocketRcvBuf>
 <DiffServ>0</DiffServ>
 <DiffServMask>0</DiffServMask>
 </RTMP>
 <ECCP>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 <CoreTimeout>30</CoreTimeout>
 </ECCP>
 <ACCP>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 </ACCP>
 </Protocol>
 <IPCQueues>
 <GlobalQueue>
 <HeapSize>2048</HeapSize>
 <MaxQueueSize>10</MaxQueueSize>
 </GlobalQueue>
 <EdgeCore>
 <HeapSize>1024</HeapSize>
 <MaxQueueSize>10</MaxQueueSize>
 </EdgeCore>
 <Services>
 <HeapSize>2048</HeapSize>
 <MaxQueueSize>10</MaxQueueSize>
 </Services>
 </IPCQueues>
 <MessageCache enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </MessageCache>
 <SmallMemPool enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </SmallMemPool>
 <LargeMemPool enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </LargeMemPool>
 <SegmentsPool enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </SegmentsPool>
 <Master>
 <CoreGC>-1</CoreGC>
 <CoreExitDelay>20</CoreExitDelay>
 </Master>
 <Edge>
 <MinEventQueueThreads>2</MinEventQueueThreads>
 <MaxEventQueueThreads>-2</MaxEventQueueThreads>
 <NumSchedQueues>1</NumSchedQueues>
 </Edge>
 </ResourceLimits>
 <Logging>
 <Time>local</Time>
 <RetryNumber>0</RetryNumber>
 <RetrySleep>100</RetrySleep>
 <RecordsNumber>-1</RecordsNumber>
 <TerminatingCharacters>CRLF</TerminatingCharacters>
 <Access>
 <Enable>true</Enable>
 <Scope>server</Scope>
 <Checkpoints enable="false">
 <CheckInterval>60</CheckInterval>
 <LogInterval>3600</LogInterval>
 </Checkpoints>
 </Access>
 <Diagnostic>
 <Enable>true</Enable>
 </Diagnostic>
 <Application>
 <Enable>true</Enable>
 </Application>
 <AuthEvent>
 <Enable>true</Enable>
 </AuthEvent>
 <AuthMessage>
 <Enable>true</Enable>
 </AuthMessage>
 <FileIO>
 <Enable>true</Enable>
 </FileIO>
 </Logging>
 <Localhost>localhost</Localhost>
 <PublicIP></PublicIP>
 <SWFVerification>
 <SWFFolder></SWFFolder>
 <DirLevelSWFScan>1</DirLevelSWFScan>
 <MaxInitDelay>5</MaxInitDelay>
 <MinGoodVersion></MinGoodVersion>
 <Cache>
 <TTL>1440</TTL>
 <UpdateInterval>5</UpdateInterval>
 </Cache>
 </SWFVerification>
 <Streams>
 <StreamLogLevel>warning</StreamLogLevel>
 <Mp4>
 <Playback>
 <VideoAutoBufferReadSize>153600</VideoAutoBufferReadSize>
 <AudioAutoBufferReadSize>51200</AudioAutoBufferReadSize>
 <OtherAutoBufferReadSize>1024</OtherAutoBufferReadSize>
 <EnableAggMsgs>true</EnableAggMsgs>
 <MaxAggMsgSize>65536</MaxAggMsgSize>
 <MaxTracks>64</MaxTracks>
 <MaxSampleSize>16777216</MaxSampleSize>
 <AllowAnyAVCProfile>false</AllowAnyAVCProfile>
 <AllowAnyAACProfile>false</AllowAnyAACProfile>
 </Playback>
 <Recording>
 <MaxELSTEntries>100</MaxELSTEntries>
 <MaxDataSampleDescriptions>10</MaxDataSampleDescriptions>
 <MaxAudioSampleDescriptions>10</MaxAudioSampleDescriptions>
 <MaxVideoSampleDescriptions>10</MaxVideoSampleDescriptions>
 </Recording>
 </Mp4>
 <Raw>
 <EnableAggMsgs>true</EnableAggMsgs>
 <MaxAggMsgSize>65536</MaxAggMsgSize>
 </Raw>
 </Streams>
 <Httpd enabled="${SERVER.HTTPD_ENABLED}">
 <Directory>Apache2.2</Directory>
 <Program>bin/httpd</Program>
 <Options>-f ./conf/httpd.conf</Options>
 <Service>FMSHttpd</Service>
 </Httpd>
 </Server>
 <ServerDomain></ServerDomain>
</Root>
Application.xml
<Application>
 <Process>
 <Scope></Scope>
 <Distribute numprocs="3">Instances</Distribute>
 <LifeTime>
 <RollOver></RollOver>
 <MaxCores></MaxCores>
 </LifeTime>
 <MaxFailures>2</MaxFailures>
 <RecoveryTime>0</RecoveryTime>
 </Process>
 <LoadOnStartup>false</LoadOnStartup>
 <MaxAppIdleTime>-1</MaxAppIdleTime>
 <JSEngine>
 <RuntimeSize>1024</RuntimeSize>
 <MaxGCSkipCount>-1</MaxGCSkipCount>
 <MaxTimeOut>0</MaxTimeOut>
 <ScriptLibPath>${APP.JS_SCRIPTLIBPATH}</ScriptLibPath>
 <XMLSocket>
 <MaxUnprocessedChars>4096</MaxUnprocessedChars>
 </XMLSocket>
 <NetConnection>
 <ObjectEncoding>AMF3</ObjectEncoding>
 </NetConnection>
 <Security>
 <RPC enable="false">
 <Client>
 <Method>
 <Allow></Allow>
 </Method>
 </Client>
 <NetConnection>
 <Method>
 <Allow>onStatus</Allow>
 </Method>
 </NetConnection>
 <SharedObject>
 <Method>
 <Allow></Allow>
 </Method>
 </SharedObject>
 <Stream>
 <Method>
 <Allow>onStatus</Allow>
 </Method>
 </Stream>
 </RPC>
 </Security>
 </JSEngine>
 <StreamManager>
 <StorageDir></StorageDir>
 <QualifiedStreamsMapping enable="false" />
 <DuplicateDir appName="true"></DuplicateDir>
 <CachePrefix type="path">?IP?</CachePrefix>
 <CacheUpdateInterval></CacheUpdateInterval>
 <MaxBufferRetries>128</MaxBufferRetries>
 <ThrottleBoundaryRequest enable="false">8</ThrottleBoundaryRequest>
 <ThrottleLoads enable="true">8</ThrottleLoads>
 <ThrottleDisplayInterval>64</ThrottleDisplayInterval>
 <EnhancedSeek zone="client">true</EnhancedSeek>
 <KeyFrameInterval>60000</KeyFrameInterval>
 <MaxStreamsBeforeGC>-1</MaxStreamsBeforeGC>
 <Audio>
 <CombineSamples>
 <Subscribers>8</Subscribers>
 <LoCPU>60</LoCPU>
 <HiCPU>80</HiCPU>
 <MaxSamples>0</MaxSamples>
 </CombineSamples>
 <SendSilence>
 <Interval></Interval>
 </SendSilence>
 <NotifyAudioStop enabled="false">
 <Duration></Duration>
 </NotifyAudioStop>
 </Audio>
 <Live>
 <AccumulatedIFrames>
 <MaxTime>-1</MaxTime>
 <MaxSize>-1</MaxSize>
 </AccumulatedIFrames>
 <Queue enabled="true">
 <MaxQueueSize>4096</MaxQueueSize>
 <MaxQueueDelay>500</MaxQueueDelay>
 <FlushOnData>true</FlushOnData>
 <AggregateMessages enabled="true">
 <MaxAggMsgSize>-1</MaxAggMsgSize>
 </AggregateMessages>
 </Queue>
 <PublishTimeout>2000</PublishTimeout>
 <MaxLatency>500</MaxLatency>
 <StartClockOnPublish>false</StartClockOnPublish>
 <EraseOnPublish>true</EraseOnPublish>
 </Live>
 <SendDuplicateStart>true</SendDuplicateStart>
 <SendDuplicateOnMetaData>true</SendDuplicateOnMetaData>
 <Recording>
 <MaxSize>-1</MaxSize>
 <MaxSizeCap>-1</MaxSizeCap>
 <MaxDuration>-1</MaxDuration>
 <MaxDurationCap>-1</MaxDurationCap>
</Recording>
 </StreamManager>
 <SharedObjManager>
 <StorageDir></StorageDir>
 <DuplicateDir appName="true"></DuplicateDir>
 <ResyncDepth>-1</ResyncDepth>
 <LockTimeOut>-1</LockTimeOut>
 <AutoCommit>true</AutoCommit>
 <MaxProperties>-1</MaxProperties>
 <MaxPropertySize>-1</MaxPropertySize>
 </SharedObjManager>
 <AllowHTTPTunnel>true</AllowHTTPTunnel>
 <Client>
 <WindowsPerAck>2</WindowsPerAck>
 <Bandwidth override="yes">
 <ServerToClient>2500000</ServerToClient>
 <ClientToServer>2500000</ClientToServer>
 </Bandwidth>
 <BandwidthCap override="no">
 <ServerToClient>5000000</ServerToClient>
 <ClientToServer>5000000</ClientToServer>
 </BandwidthCap>
 <BandwidthDetection enabled="true">
 <MaxRate>-1</MaxRate>
 <DataSize>16384</DataSize>
 <MaxWait>2</MaxWait>
 </BandwidthDetection>
 <MsgQueue>
 <Live>
 <MaxAudioLatency>2000</MaxAudioLatency>
 <MinBufferTime>8000</MinBufferTime>
 </Live>
 <Recorded>
 <MinBufferTime>2000</MinBufferTime>
 </Recorded>
 <Server>
 <BufferRatio>0.5</BufferRatio>
 <Prioritization>false</Prioritization>
 <MinQueuedVideo>64</MinQueuedVideo>
 </Server>
 <Diagnostic>
 <Enable>false</Enable>
 </Diagnostic>
 </MsgQueue>
 <HTTPTunnel>
 <IdlePostInterval>512</IdlePostInterval>
 <IdleAckInterval>512</IdleAckInterval>
 <MimeType>application/x-fcs</MimeType>
 <WriteBufferSize>16</WriteBufferSize>
 </HTTPTunnel>
 <MaxMessageSizeLosslessVideo>0</MaxMessageSizeLosslessVideo>
 <OutChunkSize>4096</OutChunkSize>
 <AggregateMessages enabled="true"></AggregateMessages>
 <Access>
 <FolderAccess>false</FolderAccess>
 <AudioSampleAccess enabled="false"></AudioSampleAccess>
 <VideoSampleAccess enabled="false"></VideoSampleAccess>
 </Access>
 <UserAgent override="yes">
 <Bits from="WIN 6,0,0,0" to="WIN 7,0,55,0">0x01</Bits>
 <Bits from="MAC 6,0,0,0" to="MAC 7,0,55,0">0x01</Bits>
 </UserAgent>
 </Client>
 <Debug>
 <MaxPendingDebugConnections>50</MaxPendingDebugConnections>
 <AllowDebugDefault>false</AllowDebugDefault>
 </Debug>
 <HTTP>
 <HTTP_1_0>false</HTTP_1_0>
 <Verbose>false</Verbose>
 <Connections>
 <MaxTimeout>60</MaxTimeout>
 <Reuse>true</Reuse>
 <Interface></Interface>
 </Connections>
 <Proxy>
 <Host></Host>
 <Port></Port>
 <Type>HTTP</Type>
 <Tunnel>false</Tunnel>
 <Username></Username>
 <Password></Password>
 </Proxy>
 <Redirect>
 <Allow>true</Allow>
 <Max>10</Max>
 <UnrestrictedAuth>true</UnrestrictedAuth>
 </Redirect>
 </HTTP>
 <SWFVerification enabled="false">
 <SWFFolder></SWFFolder>
 <MinGoodVersion></MinGoodVersion>
 <DirLevelSWFScan>1</DirLevelSWFScan>
 <MaxInitDelay>5</MaxInitDelay>
 <FirstHashTimeout>5</FirstHashTimeout>
 <FinalHashTimeout>60</FinalHashTimeout>
 <UserAgentExceptions>
 <Exception from="" to=""/>
 </UserAgentExceptions>
 <Cache>
 <TTL>1440</TTL>
 <UpdateInterval>5</UpdateInterval>
 </Cache>
 <ConnectionBlocking enabled="false"/>
 </SWFVerification>
 <Logging>
 <Access>
 <Checkpoints enable="false">
 <LogInterval>3600</LogInterval>
 </Checkpoints>
 -->
 </Access>
 </Logging>
 <DisallowedProtocols></DisallowedProtocols>
</Application>
Vhost.xml
<VirtualHost>
 <AliasList>
 <Alias name="alias1"></Alias>
 </AliasList>
 <AppsDir>${VHOST.APPSDIR}</AppsDir>
 <ResourceLimits>
 <MaxConnections>-1</MaxConnections>
 <MaxEdgeConnections>-1</MaxEdgeConnections>
 <MaxAppInstances>15000</MaxAppInstances>
 <MaxStreams>250000</MaxStreams>
 <MaxSharedObjects>50000</MaxSharedObjects>
 <AppInstanceGC>-1</AppInstanceGC>
 </ResourceLimits>
 <VirtualKeys>
 </VirtualKeys>
 <VirtualDirectory>
 <Streams></Streams>
 </VirtualDirectory>
 <DNSSuffix></DNSSuffix>
 <Allow>all</Allow>
 <Proxy>
 <Mode>local</Mode>
 <RequestTimeout>2</RequestTimeout>
 <Anonymous>false</Anonymous>
 <CacheDir enabled="false" useAppName="true">
 <Path></Path>
 <MaxSize>32</MaxSize>
 </CacheDir>
 <LocalAddress></LocalAddress>
 <RouteTable protocol="">
 <RouteEntry></RouteEntry>
 </RouteTable>
 <EdgeAutoDiscovery>
 <Enabled>false</Enabled>
 <AllowOverride>true</AllowOverride>
 <WaitTime>1000</WaitTime>
 </EdgeAutoDiscovery>
 <SSL>
 <SSLVerifyCertificate>true</SSLVerifyCertificate>
 <SSLCACertificatePath></SSLCACertificatePath>
 <SSLCACertificateFile></SSLCACertificateFile>
 <SSLVerifyDepth>9</SSLVerifyDepth>
 <SSLCipherSuite>ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH</SSLCipherSuite>
 </SSL>
 -->
 <AggregateMessages enabled="true">
 </AggregateMessages>
 </Proxy>
 <Logging>
 <Access>
 <Checkpoints enable="false">
 <LogInterval>3600</LogInterval>
 </Checkpoints>
 -->
 </Access>
 </Logging>
</VirtualHost>

Hello guys,
thanks for replying.
All intances spent 24h playing/streaming as expected but today some of them went down.
Any idea why this core is being deactivated?
master.log
2011-04-20 16:30:54 16109 (i)2581172 System memory load (90) is now below the maximum threshold. -
2011-04-20 16:30:55 16109 (w)2581171 System memory load (91) is high. -
2011-04-20 18:36:18 16109 (i)2581226 Edge (16129) is no longer active. -
2011-04-20 18:36:18 16109 (w)2581255 Edge (16129) _defaultRoot__edge1 experienced 1 failure[s]! -
2011-04-20 18:36:18 16109 (i)2581224 Edge (28483) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1". -
2011-04-20 18:53:25 16109 (i)2581223 Core (16132) is no longer active. -
2011-04-20 18:53:25 16109 (i)2581221 Core (28621) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app "registry" -inst "registry" -tag -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:registry:registry:".-
2011-04-20 18:57:25 16109 (i)2581223 Core (28621) is no longer active. -
2011-04-20 18:57:25 16109 (i)2581221 Core (28814) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app "registry" -inst "registry" -tag -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:registry:registry:".-
2011-04-20 19:00:15 16109 (i)2581172 System memory load (61) is now below the maximum threshold. -
2011-04-20 19:00:28 16109 (i)2581223 Core (16752) is no longer active. -
2011-04-20 19:00:28 16109 (w)2581256 Core (16752) _defaultRoot_:_defaultVHost_:::_1 experienced 1 failure[s]! -
2011-04-20 19:00:28 16109 (i)2581221 Core (29004) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app -inst -tag "_1" -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:::_1".
core.log
2011-04-20 16:30:56 16132 (w)2581171 System memory load (91) is high. -
2011-04-20 18:36:16 16752 (i)2581247 Core (16752) disconnected from edge. -
2011-04-20 18:36:16 16548 (i)2581247 Core (16548) disconnected from edge. -
2011-04-20 18:36:16 16962 (i)2581247 Core (16962) disconnected from edge. -
2011-04-20 18:36:16 16132 (i)2581247 Core (16132) disconnected from edge. -
2011-04-20 18:36:21 16962 (i)2581246 Core (16962) sending register cmd to edge. -
2011-04-20 18:36:21 16752 (i)2581246 Core (16752) sending register cmd to edge. -
2011-04-20 18:36:21 16548 (i)2581246 Core (16548) sending register cmd to edge. -
2011-04-20 18:36:22 16132 (i)2581246 Core (16132) sending register cmd to edge. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 18:53:27 28621 (i)2581246 Core (28621) sending register cmd to edge. -
2011-04-20 18:53:30 28621 (w)2581171 System memory load (99) is high. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 18:57:27 28814 (i)2581246 Core (28814) sending register cmd to edge. -
2011-04-20 18:57:29 28814 (w)2581171 System memory load (99) is high. -
2011-04-20 19:00:16 16962 (i)2581172 System memory load (61) is now below the maximum threshold. -
2011-04-20 19:00:15 28814 (i)2581172 System memory load (66) is now below the maximum threshold. -
2011-04-20 19:00:16 16548 (i)2581172 System memory load (61) is now below the maximum threshold. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 19:00:29 29004 (i)2581237 Starting admin app on core (29004). -
2011-04-20 19:00:29 29004 (i)2581238 Core (29004) connecting to admin. -
2011-04-20 19:00:29 29004 (i)2581231 Core (29004) connected to admin. -
2011-04-20 19:00:29 29004 (i)2581234 Core (29004) connection to admin accepted. -
2011-04-20 19:00:29 29004 (i)2581246 Core (29004) sending register cmd to edge. -
# free -m
 total used free shared buffers cached
Mem: 7993 6076 1917 0 4 34
-/+ buffers/cache: 6037 1956
Swap: 3147 1558 1589
thank you!

Domain Controller going down after IDM implemented

Hi,
We have implemented IDM 7.1 and are using the PSS (Password Self Service), Password Syncronization functionality for 2 AD and 6 ABAP systems. This PSS is implemented to support our company ESS which is on the internet so that users can reset their own password. Hence to support it we have a architecture having one AD on the DMZ and another internal.
Both the AD repositories have been configured pointing to a perticular DC (Domain Contorller) . All the DC's have Phook installed on them.
Since Go-live we have not had any issue with the DC on the DMZ but the internal DC keeps going down once in a while and it doesnt have a pattern. We tried switching to different DC's also which didnt work. Right now we are keeping a close watch on the DC and we carryout a restart whenever it happens.
Did anyone come across such kind of a issue, if so then please let me know.
Thanks.

Hi Ahmed,
Thank you for your quick response! Our secondary domain controller IP settings were set properly according to the recommendation, but the primary (the one having the issues) was not. I went ahead and changed the settings and did an ipconfig /registerdns
and restarted the netlogon service. Nothing changed after that. I ran a dcdiag and the only one that failed was this:
      Starting test: NCSecDesc
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=ForestDnsZones,DC=*hidden*,DC=*hidden*
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=DomainDnsZones,DC=*hidden*,DC=*hidden*
         ......................... *hidden PDC Name* failed test NCSecDesc
I'm going to restart the server tonight after those IP changes and let you know my outcome.
Thanks again!

Ethernet performance going down after upgrading to S11U1

I upgraded from S11-SRU11 to S11U1-SRU1. Until approx. 5 min after reboot, the ethernet performance is as I am used to it before the upgrade, at about 113 Mbps on a e1000g (which is pretty close to the physical maximum). Then suddenly the throughput goes down significantly, and I measure everything between 8 Mbps and 69 Mbps. Rebooting does not help.
After going back to S11-SRU11 via snapshot, the old performance of 113 Mbps is back, and consistenly.
All throughput is measured with nttcp-1.147 on Solaris and PCATTCP-0114 on Windows 7.
Has anyone seen that behaviour, too?

Do you see any TCP retransmissions in the output from "netstat -s -P tcp"
when this issue happens?
Also, please post the output from 'dlstat -r <e1000g-if>'.

FSRM Quotas not going down after shadow copy snapshot

I've got an issue with FSRM Quotas not being recalculated when a user removes some data from their home drive.
Server is 2008R2 Standard. Clients are a mix of Windows 7, 8, and 8.1 it seems to happen irrespective of the client being used.
if a user removes data after a shadow copy has been created the available space doesn't go down.
if a user removes data before a shadow copy has been created the free space goes up as expected.
I have Enabled this policy as I thought it might be related to the Recycle bin but that makes no difference: Windows Components/File Explorer Do not move deleted files to the Recycle Bin = Enabled.
this is starting to become an issue as now users cant clear space themselves and we have to up their quota should they run out of Space. Even if the administrator deletes the files directly
on the file server the quota is not recalculated.

Hi there Shaon
the server is a 2008R2 server that hosts our Domain users (students and teachers) home drives. they are split up by years in the example above the home drives fall into 2012\%username% a quota template is used to apply quotas to the home drives. Shadowcopies
is enabled on the Drive (d:) in my case we have 2 copies created a day so we get about 30 Days of history that people can look back on which is really useful if they delete something - saves trawling through DPM :)
So what can happen: say I'm student test12 and I log into a computer and copy 100MB of photos onto my home drive the free space goes down as expected via the quota - if they had a 700MB quota their home (h:) drive Which was empty to begin with it would show
600 MB free. if they then remove the files immediately the free space goes back showing 700MB Free.
However if the Student doesn't delete the files and after lunch (after a shadow copy snapshot has taken place) logs back in and then deletes the files the free space doesn't change it will continue to show 600MB Free despite there being no files on their
h: drive.

Router goes down after Wi-Fi connecting my iPhone 5s

Hello,
Yes, simple as that, every time I connect my iPhone 5s to the home broadband, the router goes down for a few minutes and then it comes back, then goes down again and on ... (Never ending loop).
I made sure that it's related to my iPhone when the browser gone offline on my Macbook, when I turned the Wi-Fi off in my iPhone the router was on again.
Could it be a conflict or something?
Any suggestion will be good!
Many thanks and much appreciated.

Resetting Network Settings means that the saved password that enabled your iPhone to connect to your WiFi router was erased. You are now reentering that password. Most likely you are entering the password incorrectly or are entering an old password or the wrong password.
Check that the password that you are using is absolutely, positively, the correct and current password for your router. Make sure that you are not confused l with 1, O with 0, etc.

OpenGL games fps going down after install Windows on RAID 0 on K9A2 Platinum

Hello .
Description of problem :
The problem was showed right after installations Windows on RAID 0.
When I had one HDD, the problem was not.
The problem was showed on both integrated RAID controllers (both on SB600 and on Promise T3).
When I play games (just games in OpenGL!!! for example conter-strike 1.6, Quake3, on Direct3D such problem is not present), and simultaneously I copy (or other users on FTP:)) a plenty of small files, game frames per second going down.
If to stop copying in current of minute, frames per seconds goung up.
If in 2-3 minutes, will help only restart game.
Processor type: "AMD Athlon 64 X2 4000+ (Brisbane)"
Motherboard: "MSI K9A2 Platinum, AMD® 790FX and SB600 (+ Promise T3) Chipset, AMI BIOS v1.3"
RAM: "Samsung 1GB 800MHz DDR2 Non-ECC"
HDD: 2x in RAID 0: "Samsung HD501LJ 500GB 7200rpm 16MB with NCQ Serial ATA II-300"
Video: "XpertVision NVidia 8800GT 512Mb"
Power supply: "FSP ATX-400PNR 400W ATX 12V v 2.01 20+4 pin passive PFC 12cm fan Noise Killer"
Operating System:
Windows 2003 server 32bit
Windows Vista Ultimate 32bit
I have established last version Dual Core Optimizer.
Tried to clean in boot.ini a key /usepmtimer and reboot has helped nothing.
The similar problem was on absolutely another motherboard (Biostar nForce570SLI) and hdd (Hitachi 80GB) with the same processor and Windows. But , installation Dual Сore Optimizer and a key/userpmtimer has helped.
What reasons of a problem?
How to eliminate a problem?
In advance thanks for the answer.

Oops, missed the PSU....
Quote
But why when copying to stop in 3-4 minutes, game fps not going up.
In fact after copying files system resources are not used, also reading and writing from a disk does not occur.
I understand that at copying Soft-RAID use some system resources. But when system resources not use game fps not going up.
Will help only restart game!!!
Quote
The problem was showed right after installations Windows on RAID 0.
When I had one HDD, the problem was not.
See that? You went from single disk to RAID and then the problem started...... I guess it's not very hard to conclude that one is related to the other. Just try to use single disk again an and see what happens.
Then: did you have two disks installed before going to RAID-0? Or did you add one disk for that? If so, then your PSU may be the troublemaker, not providing enough juice to feed all devices.
About your English: it is fine, don't worry. We do not mind, as long as it looks like English and we can understand it and as long as there's no MSN-crap in it... so, you are doing fine.

Oracle 10G Db Starts-up After Server Reboot, BUT Goes DOWN After Some Time

Hi All,
I am really puzzled over this one. I have couple of servers running DB on them and I have used scripts to auto-enable them when server(s) reboot.
But there is one server where I see this funny behavior.
The DB comes-up after server reboot.
I can verify that in the startup logs and some more logs that I created.
I can see that LISTENER is able to communicate also.
But after a while, the DB shuts-down....!!
I have checked all the places I could. I have also tried to see the difference between this server and others (I did not install this one), but can not see any difference.
Is there anyway to find out (log) what is shutting down the DB??
Any help will be much appreciated as I am at my wits end.
Following is snap-shot from my logs:
Fri Mar 16 20:42:29 EDT 2007
Running dbstart.
Done with starting all, let's check status...
Fri Mar 16 20:42:42 EDT 2007
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 20:42:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date 16-MAR-2007 00:46:56
Uptime 0 days 19 hr. 55 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/product/10.2.0/Db_1/network/admin/listener.ora
Listener Log File /oracle/product/10.2.0/Db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.103.253.50)(PORT=1521)))
Services Summary...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
Current Status:
# date
Fri Mar 16 21:30:40 EDT 2007
# su - oracle -c "lsnrctl status"
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:30:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.103.253.50)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refused

I was just looking at that.. Thanks for the tip.
Following is what I see. But not sure what does it tell me?? Please help......
From alert_orcl.log:
<snip>
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Mar 16 20:42:41 2007
Errors in file /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Fri Mar 16 20:42:42 2007
Completed: ALTER DATABASE OPEN
From /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
# cat /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
/oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
ORACLE_HOME = /oracle/product/10.2.0/Db_1
System name: SunOS
Node name: gcars0j6
Release: 5.10
Version: Generic_118833-24
Machine: sun4u
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 7700, image: oracle@gcars0j6 (TNS V1-V3)
*** SERVICE NAME:() 2007-03-16 20:42:37.548
*** SESSION ID:(159.3) 2007-03-16 20:42:37.548
Thread 1 checkpoint: logseq 255, block 2, scn 8602014
cache-low rba: logseq 255, block 3
on-disk rba: logseq 255, block 767, scn 8602399
start recovery at logseq 255, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 382Kb in 0.16s => 2.33 Mb/sec
Total physical reads: 4096Kb
Longest record: 3Kb, moves: 0/1066 (0%)
Change moves: 1/8 (12%), moved: 0Mb
Longest LWN: 308Kb, moves: 0/29 (0%), moved: 0Mb
Last redo scn: 0x0000.0083431e (8602398)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1925/2083 = 0.9
*** 2007-03-16 20:42:37.702
KCRA: start recovery claims for 149 data blocks
*** 2007-03-16 20:42:37.705
KCRA: blocks processed = 149/149, claimed = 149, eliminated = 0
*** 2007-03-16 20:42:37.706
Recovery of Online Redo Log: Thread 1 Group 2 Seq 255 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 2054/2074 = 1.0
Error in executing triggers on database startup
*** 2007-03-16 20:42:41.963
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15

JMS Queue slows down after time

 Hi,
 Our system makes use of queues extensively. We, pumps trhough tens of thousands
 of messages every day . Every few days, our Weblogic 7 SP5 JMS queue slows down
 with very little activity. After restarting the instance, everything goes back
 to normal. We have about 14 queues in our system with a very high rate of throughput.
 Any ideas as to what slows down the queue requiring a restart.
 The JMS file store is excluded from anti-virus and backup software.
 Kevin


 Hi Tom, The memory usage is fine. 1Gb is available to the JVM and the memory usage
 is usually about 1/4th of that when we experience the issues below
 Tom Barnes <[email protected].bea.com>
 wrote:
 >Another thing to look at is server CPU usage before and
 >during the slowdown.
 >
 >Also memory usage. There may be a memory leak
 >somewhere that expands JVM memory to the point
 >where the operating system begins to page...
 >
 >Kevin Sharfman wrote:
 >
 >> Hi Tom, We are able to measure a slowdown by the time it takes to post
 >messages
 >> to a queueas well as the time for a message to be delievered off the
 >queue. Our
 >> throughput just drops dramatically. During this time, the number of
 >messages in
 >> the queues are quite low, due to the slow duration of posting a message.
 >I will
 >> try and obtain thread drumps. However, the are no error messages nor
 >logs that
 >> point to any problem. Restarting the instance, immediatly solves the
 >performance
 >> problem. This problem occurs intermittedly - sometimes once a week
 >or once every
 >> 2 weeks or even twice a week.
 >>
 >>
 >> Tom Barnes <pleasereplyinnewsgroup.weblogic.developer.interest.jms@newsgrou
 >>
 >> ps.bea.com> wrote:
 >>
 >>>Hi Kevin,
 >>>
 >>>Is the number of messages in the destination higher at
 >>>these times?
 >>>
 >>>If there is "very little activity" how can you
 >>>measure a slowdown?
 >>>
 >>>Can you force server side thread-dumps the next
 >>>time this occurs?
 >>>
 >>>Tom
 >>>
 >>>Kevin Sharfman wrote:
 >>>
 >>>
 >>>>Hi,
 >>>>
 >>>>Our system makes use of queues extensively. We, pumps trhough tens
 >>>
 >>>of thousands
 >>>
 >>>>of messages every day . Every few days, our Weblogic 7 SP5 JMS queue
 >>>
 >>>slows down
 >>>
 >>>>with very little activity. After restarting the instance, everything
 >>>
 >>>goes back
 >>>
 >>>>to normal. We have about 14 queues in our system with a very high
 >rate
 >>>
 >>>of throughput.
 >>>
 >>>>Any ideas as to what slows down the queue requiring a restart.
 >>>>
 >>>>The JMS file store is excluded from anti-virus and backup software.
 >>>>
 >>>>Kevin
 >>>
 >>
 >

Redo Collector goes down after starting correctly

Hi. I'm experiencing some problems with the REDO collector.
Versions, etc....
AV server: 10.2.3.1 - Red Hat Enterprise Linux AS release 4 (Nahant Update 5) 64 bits
Audited database: Oracle 10.2.0.4 - Red Hat Enterprise Linux AS release 4 (Nahant Update 5) 64 bits.
OSAUD and REDO collectors verified with avorcldb and, apparently, deployed without problems.
When i start the REDO collector from the av admin console, this message is shown "El recopilador PXMEDO01.SACYL.ES:REDO_pxmedo01 se ha iniciado correctamente" (in english -The collector PXMEDO01.SACYL.ES:REDO_pxmedo01 has been started successfully). Just some seconds later, the collector appears to be stopped...
From the command line:
avctl start_collector -collname REDO_pxmedo01 -srcname PXMEDO01.SACYL.ES
AVCTL iniciado
Iniciando recopilador...
El recopilador se ha iniciado correctamente. (in english - the collector started successfully)
just few seconds seconds after the previous command ends, i send this one
avctl show_collector_status -collname REDO_pxmedo01 -srcname PXMEDO01.SACYL.ES
AVCTL iniciado
Obteniendo mÃ©tricas de recopilador...
No se estÃ¡ ejecutando el recopilador ((in english - the collector is not running)
Registros por Segundo = 0,00
Bytes por segundo = 0,00
Any ideas of what's going on?
Thanks in advance.

Hi again. Now, i saw the error on alert.log. All this is written every time i try to start the REDO collector:
Thu Dec 10 10:07:13 2009
Streams CAPTURE C001 started with pid=65, OS id=20295
Thu Dec 10 10:07:13 2009
LOGMINER: Parameters summary for session# = 1
LOGMINER: Number of processes = 3, Transaction Chunk Size = 1
LOGMINER: Memory Size = 10M, Checkpoint interval = 100M
LOGMINER: session# = 1, reader process P000 started with pid=66 OS id=20268
LOGMINER: session# = 1, preparer process P002 started with pid=61 OS id=20272
LOGMINER: session# = 1, builder process P001 started with pid=67 OS id=20270
Thu Dec 10 10:07:15 2009
Streams CAPTURE C001 with pid=65, OS id=20295 stopped
Thu Dec 10 10:07:15 2009
Errors in file /opt/oracle/10gr2/exra4/pxmedo01/bdump/pxmedo01_c001_20295.trc:
ORA-00604: se ha producido un error a nivel 1 de SQL recursivo (SQL recursive error at level 1)
ORA-14097: el tipo o el tamaño de columna no coinciden en ALTER TABLE EXCHANGE PARTITION (the type or size of column do not match in ALTER TABLE EXCHANGE PARTITION )
ORA-06512: en "SYS.LOGMNR_KRVRDLUID3", línea 1799
ORA-06512: en línea 1

IMac keeps shutting down after Time Machine recovery

I have a late 2007 iMac. The hardrive died, so I installed a new SSD. I have a Time Machine backp on a usb drive and aslo a bootable usb drive created a couple of months ago. I installed Maverics on the new SSD (I was running Maverics before as well), and up to this point everything worked fine. Than I started from Recovery Drive and run Recovery from Time Machine. It seemed to be working fine, but after it was done, the iMac shut down. Now every time I start it, it chimes, the gray background with apple appears, and it shuts down immediately.I repeated the whole proces twice, same thing happend. I also tried to do migration instead of recovey, which worked, but that didn't copy all my files, just the program files.
I have no clue, what to do. Any suggestions?

I have a late 2007 iMac. The hardrive died, so I installed a new SSD. I have a Time Machine backp on a usb drive and aslo a bootable usb drive created a couple of months ago. I installed Maverics on the new SSD (I was running Maverics before as well), and up to this point everything worked fine. Than I started from Recovery Drive and run Recovery from Time Machine. It seemed to be working fine, but after it was done, the iMac shut down. Now every time I start it, it chimes, the gray background with apple appears, and it shuts down immediately.I repeated the whole proces twice, same thing happend. I also tried to do migration instead of recovey, which worked, but that didn't copy all my files, just the program files.
I have no clue, what to do. Any suggestions?

Windows Experience Index goes down after updating GPU driver

The Graphics # went from a 4.9 to 1.
Why is this?
Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB,
Network Card: Intel(R) WiFi Link 1000 BGN, OS: Windows 7 Professional 64-bit

It might help members to help you if they knew which Lenovo system you posses, maybe you could post this information or even better post the type and model number.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Internet goes down after suspend/resume?

Hey ive got arch x86_64 whenever I use the
$ sudo pm-suspend
command I will suspend but when i come back up the internet will be down. I am not able to get it back up with
# ifconfig eth0 up && dhcpcd eth0
I have to reboot to get it working again Ive been able to use suspend/resume with arch on this same computer before and this is a fresh install of about 3 days old. Any ideas why this happens?

I have similar issue with my laptop's wifi. I use:
$ sudo /etc/rc.d/net-auto restart
Maybe there is a better way than to restart the network, but that command works with mine.
Last edited by zaazaa (2009-02-28 17:57:03)

KB Download number going DOWN after time ????

Similar Messages

Maybe you are looking for