KB11N posting- Exchange rate

Hello Gurus,
I have a requirement to transfer balances from one object to another object (Internal order), when i try to post the document via KB11N with controlling currency, the cost object balances (KKCS) shows zero values in controlling currency, but still have balance in local currency.
If i try to post KB11N with local currency, the results are visversa.
So can any one let me know is there any possible to post by giving the local currency and controlling area currency while transfer the balance from one object to another?
Thanks
Babu

Hi Babu bhai
That means you did not activate the "All Currencies" indicator in your contr area settings OKKP
If you do that, this problem should not occur... Read the F1 help for "All Currencies" button and it explains clearly all the info that you will need
Br, Ajay M

Similar Messages

Not able to post exchange rate difference in GL account configured in OBYC-

Hi Guys,
As per my client requirement, We need to post exchange rate difference(PO & in IR) in GL account. I have configured setting in OBYC - Transaction key is KDM. Also i have selected check box for company code, at spro>MM>Logistics Invoice Verification>Incoming Invoice>Configure How Exchange Rate Differences Are Treated.
Still system is not able to pick the GL account which is defined in OBYC.
Please help.
Steps i have carried out:
1. Assigned GL account in OBYC, Transaction key KDM
2. selected check box for company code, at spro>MM>Logistics Invoice Verification>Incoming Invoice>Configure How Exchange Rate Differences Are Treated.
3. Post PO (with some exchnage rate say 1.25)
4.Post MIGO
5. POST MIRO (Exchange rate is 1.50), Here when i simulate or post, the GL account is not picking to post difference.
M i missing any config????
I appreciate your help a.s.a.p,.
Thanks
Akshay

According to me, system wont calculate exch rate differences during MIRO.
Please make sure that, you have not selected the Exch Rate Fixed check box in PO header part, next to the exch rate field.
MIGO Entry:
Inventory/Expense Dr 100USD   5000INR
GR/IR......................Cr 100USD   5000INR
MIRO Entry:
GR/IR......................Dr 100USD   4700INR
Vendor....................Cr 100USD    4700INR
In this case, system will create 0 USD & 300 INR for forex diff gl line item, when you clear the GR/IR open items only.
Assume INR is your LC.

Post exchange rate differences to separate account on invoice verification

Dear expert,
I'm facing a problem and need your guidance related to exchange rate differences between Goods Receipt and Invoice verification caused by time differences
My company buy an asset using purchase order with account assignment.
As an example:
Asset price on PO      : 100 USD
On Good receipt (Exchange rate 1 USD = 9,000 Rp)
Journal created
Asset                             900,000 Rp
     GR/IR Clearing                900,000 Rp
On Invoice verification (Exchange rate 1 USD = 10,000 Rp)
Journal created
GR/IR Clearing                  900,000 Rp
Asset                               100,000 Rp (Exchange rate differences)
    Vendor                             1,000,000 Rp
My Company wants to put "Exchange rate differences" into separate account (Gain/Loss realized account) instead throw it on asset because asset value would be change. How make it happend?
I already try to configure KDM (Exchange rate differences) and OB09 and still exchange rate differences posted into asset

Hi,
Check config in transaction code Oba1 and Obyc. check posting G/L account of PO (KBS), n try to change in KDR Class.
Regards
Sanjeet Kumar

System is trying to post exchange rate rounding revenues to a cost center!

Hello experts,
We are trying to clear some accounts payable items and also run the payment program. Both operations are trying to post revenue to a cost center (and profit center), and we get an error (because cost center is locked against revenues, and we want to keep it that way...).
We have implemented the New GL with document split. We have setup account 80600 for revenue exchange rate differences in configuration. We have setup in OKB9 account 80600 for exchange rate differences to be posted to a profit center. Account 80600 is defined as a revenue element (type 11).
Can anybody please explain why the system is deriving the cost center and profit center when trying to post the revenue, instead of just the profit center?
Eventually if I cannot solve this issue, can anybody tell me how to change a cost element category of a cost element (from 11 to 1) which already has transactions posted to?
Thank you for your help in advance!
Best regards,
Jose Eximeno

Found the answer in the doc. split for controlling setup

Exchange Rate difference posting during MIRO posting

Hi ,
We are facing an issue for exchange rate difference posting during MIRO.
PO creation , GR posting & IR posting done on same date. Vendor in PO has different currency than company code currency. Exchange rate maintained in OB08 for this period is taken in PO.
PO value & GR value is same. Due to raw material cost there was price difference posted during GR posting.
(i.e. Raw material cost - GR/IR value = Price difference amount)
During posting MIGO, 3 accounts got posted.
Raw material cost account got debited & offset credit to GR/IR account & price difference account (in vendor & company code currency also)
During posting MIRO, 4 accounts got posted.
Vendor account got credited with GR/IR amount & offset to GR/IR account debit.
Exchange rate difference account got credited & offset to price difference account (in company code currency only)
Since PO creation , GR posting & IR posting done on same date, then why system has posted exchange rate difference account in local currency only during MIRO posting ?
Your inputs appreciated.
Thanks & Regards

Hi,
there is a setting in configuration of logistics invoice verification where you can control the calculation and posting of exchange rate differences. If you had the setting active that exchange rate differences are calculated against a planned exchange rate, that might lead to the kind of postings you describe. Please check.
best regards, Udo

AP- Why exchange rate type between Post invoice and Post payment is differe

AP- Why exchange rate type between Post invoice and Post payment is different ?
Hello,
I have question
when post AP invoice , document type KR
document date = 11.12.2009
posting date = 31.12.2009
entry date = 05.01.2010
this document using exchange rate type B (standard translation at bank selling rate) on 31.12.2009 (use posting date )
but when post payment for above document,document type ZP
document date = 25.06.2010
posting date = 25.06.2010
entry date = 24.06.2010
this document using exchange rate type M (standard translation at average rate) on 23.06.2010
please answer
why do post invoice and post payment use different exchange rate type?
and why at payment donot use posting date for get exchange rate ?

Nanas,
Sorry if im not being clear...
My point is: the difference rates customization for payments is done at FBZP.
At Paying Company Codes, you have 4 flags for exchange rates differentes.
At Control Data look:
*Do not Post any Exchange Rate Differences:
If the indicator is not set, the difference between the exchange rate at the time of posting and the exchange rate at the time of payment is determined for items which are posted in foreign currency. The payment program uses the translation rate in the currency table in the system for this purpose.
*No Exchange Rate Differences for Partial Payments:
Has the effect that the payment program for partial payments (requests for payment using transaction F-59) does not post exchange rate differences.
*Processing of Bill of Exchange Payments:
*Separate Payment for each Payment Reference
Regards
Bruno

Exchange rate difference in f-03

Hi all
pl. help me. I am not able to clear open item in f-03 which is maintained in BRL. I am posting payment in usd. the error reads:
Ex.rate diff.accts are incomplete
Diagnosis
The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
System response
The system cannot generate the exchange rate difference posting.
Procedure
By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards.
I have called transaction OBA1, and entered the GL a/c and currency BRL. Even i cannot save it says
"Enter line items first or choose open items"
pl reply friends urgently
Thks
uma

Hi Uma,
Exchange Rate has been defined both the end. Like INR = USD and USD = INR.
Here you are not yet defined GL account for Exchange Rate Difference account (Gain or Loss).
T.Code OB09 Define G/L , Currency and Currency Type.
Before that you would have the GL account please create in FS00.
Hope it will help you.
Regards,
Sivakumar Sathiyamoorthy
+919916131375

Exchange rate difference between MIRO and GR/IR

Hi,
Exchange rate difference between MIRO and GR/IR we need to written off as a expense for imported w/off expense and in case of assets we need to post exchange rate difference to exchange fluctuation account. Currently exchange rate difference is accounting under capital work in progress(Asset)instead of exchange fluctuation.
Thanks in Advance
Regards
Venkata Suresh

Hi,
At MIRO stage, after entering PO number system will automatically populate the GRN value for selection. Here if you found that invoice value, which you have received from the vendor, is more than the system proposed amount, then you can adjust that diff amount in the GL account tab, which is next to PO reference tab in MIRO.
There enter the exch loss GL account and enter the diff amount.
Thanks,
Srinu.

Exchange Rate Difference Error

Hi,
While posting payment through F-58, we are getting below error :
Ex.rate diff.accts are incomplete for account 0010500400 currency INR
Message no. F5063
Diagnosis
The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
System Response
The system cannot generate the exchange rate difference posting.
Procedure
By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards.
Proceed
However, all the necessary settings are made in KDF & KDB. Here we are processing payment for local vendor & the PO, GR, IR is done in INR then at the time of processing payment its giving above mentioned error. We are unable to understand that why system is asking for exchange rate difference account. Please suggest as the issue is urgent.
Regards,
Varsha

Hi Varsha,
As the message mentioned in detail, please check your configuration in tcode OBA1 again.
For Transaction type KDF, you double click to your GL account, and maintain the Valuation loss/gain, balance sheet adjustment in there.
For your ref:
You can read more information about this error in SAP note 12962 - Clearing Foreign Currency Items
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D313239363226
Regards,
Julie

Exchange Rate difference account-

Hi All,
Please help me to find a solution for the scenario below.
Business process is third party PO scenario where the vendor currency(USD) is different from ccode currency.
Material is valuated at 30 EUR.
PO is made with the vendor at Rs.51.60 USD.(Exchange rate is not fixed at header level in PO)
GR is made at 51.60 USD
While doing IR,the exchange rate has changed from 1.290 to 1.395.
What configuration should be done for the system to post to Exchange rate difference account(transaction key KDM)..
(As of now the difference in price is posted to the consumption account,Which was already hit during GR).
Regards,
Deepak.

HI DEEPAK,
If Price control maintained in Material master is " V " then, at MIRO,
1. exchange rate diff. will be posted to stock account if available stock qty is >= invoice quantity
2. exchange rate diff. will be posted to exchange rate diff acct (as per KDM) ,if available stock qty is 0
3. exchange rate diff. will be posted propotionately to stock account and exchange rate diff acct (as per KDM) ,if available stock qty is < invoice quantity
If Price control maintained in Material master is " S " then, at MIRO,
1. exchange rate diff. will be posted exchange rate diff acct (as per KDM) i.e. irrespective of stock availability.
pls, check and revert back
Regards,
jay

Exchange rate difference in SAP MM

Hi experts,
Is there any way to bring the exchange rate difference at time of invoice to some other account rather than stock account.
The scenario is; for eg.
in PO : 1 USD = 50 INR
@ GRN 1 UDS = 55 INR
@ INV 1 USD = 60 INR
At the GRN, inventory will be updated with 55 INR.
At the INV, system will value vendor at 60 INR, but in Standard SAP, the difference of 5 INR will be updated as below.
1. exchange rate diff. will be posted to stock account if available stock qty is >= invoice quantity
2. exchange rate diff. will be posted to exchange rate diff acct (as per KDM) ,if available stock qty is 0
3. exchange rate diff. will be posted propotionately to stock account and exchange rate diff acct (as per KDM) ,if available stock qty is < invoice quantity
Is there any way, that system will post the exchange rate difference to separate account , rather than inventory.
It is because in client audit, the audit concern say, according to Indian standards, inventory should be valuated only one time in imports. In case of any differences, it should post to separate account and not inventory. They say SAP allows that. Client asked us the same.
I have checked, OMRW, but even after giving 'N' in ERD setting, system is posting to stock account only.
Any way to meet this??
Regards
sBk

Dear Sujith,
Exchange rate differences for a moving average price material will be
posted to the stock account, provide there is sufficient stock coverage.
Transaction OLMR -> Incoming invoice -> Configure how exchange rate
difference are treated.
If you set this selection field then the settings in the ERD Setting
column for this currency type are no longer relevant. The system
calculates and posts exchange rate differences between order-related
goods receipts and invoices not just for materials with standard price,
but also for:
* Materials with moving average price
* Account-assigned transactions
* Planned delivery costs
Because of this setting the exchange rate differences are posted to KDM
account instead of stock (BSX) or price difference (PRD) account
If you uncheck the field, exchange rate differences will be posted to
the stock or price difference account, for a moving average price
material, based on the stock coverage.
Please refer Sap note 980402 in detail
regards,
lalita

Exchange rate issue for import po

Dear friends,
my client book a po in usd for the main party but the custom duty condation we are mataining in inr for a different ....now we have paid advance against the bill now the bill has come we need to clear the COMMISSIONER OF CUSTOMS account but the account showing exchange rate difference
Ex.rate diff.accts are incomplete for account 0010700305 currency INR
Message no. F5063
Diagnosis
The accounts for posting exchange rate differences could not be determined. For the specified G/L account and the specified currency key, the accounts are only specified incompletely. Either the accounts for the implemented exchange rate difference, the accounts for the valuation differences or the balance sheet adjustment account are missing.
System Response
The system cannot generate the exchange rate difference posting.
Procedure
By pressing ENTER, you achieve that the document is reset to a status without automatic posting. In another window, you can complete default settings for exchange rate differences and post the document afterwards.
but we have already clear the same fo different IMPORT PO
Any solutation can be appriciated

Yes i know the system is also sugesst to assign the forex gain/loss through FBKP-(KDF) but my client not making import for the first time we have made several po and matain the same condition for the same vendor(COMMISSIONER OF CUSTOMS)
it havnt ask any account assignment ...till date but sundlly why it asking ?.....is there any patch file required for it?

Only reseting the cleared documents with exchange rate differences in FBRA

Hello,
we want only reset the cleared documents . We dont want to reverse the cleard documents. But When we try to do it we get a message Exchage difference are posted do you want to reverse it. Want we want to reset are in Doc.. currency. postings for August.
As i know when we have exchange rate difference we dont get an option only resettng but we get reseting and reversing.
May i know how to slove this situation.
Thank you
Chaithra

HiI
f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
Materials with moving average price
Account-assigned transactions
Planned delivery costs
The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
Regards
Antony

Unplanned delivery cost & exchange rate differences in MIRO

Hi Gurus,
while posting MIRO, I am facing the following problems. If anybody gives me reply, it will be a great help.
1. Unplanned delivery cost:
Client requirement is, these unplanned delivery costs should be added on material only.
how we can map this? how system behaves when stock is there and not there? also tell me which G/Ls will trigger.
2. Exchange Rate:
I maintained exchange rate in OB08. while doing MIRO, how system posts exchange rate differences.
which G/Ls will trigger.
in case of conditions like customs duty, cess etc how system will behave? which G/Ls will trigger?
Thanks in advance
KK

Hi,
According to first question:
For unplanned cost You have configuration for plant code:
Configuration: SPRO->MM->LIV->Incoming invoice->Configured how unplanned delivery cost are posted
You have 2 options:
- Distribute among invoice items
- Different G/L line
You have another option, You can assigne this cost for item when You use fright cost condition in PO (FRA/FRB)
If the stock will be available, then system incrase valuation, If not will be deviation.
G/L account for unplanned cost is taking from PRD(for Distribute among invoice items) or UPF(for Different G/L line) transaction from OBYC tcode and for FRA/FRB condition is FR1.
Question 2:
Configuration: SPRO->MM->LIV->Incoming invoice->Configure How Exchange Rate Differences Are Treated
G/L account takes from KDR transaction from OBYC tcode.
Regards
Lukasz

Exchange rate gain/loss during F-28

Hi
we have following secnario:-
1. company code A with local currency AED and group currency USD
2. company code B with local currency USD and group currency USD
now invoice posted in both comapnies and accordingly payment received as follows:-
1. Company code A (local currency is AEd) - invoice posted in local currency but payment received in USD
2. comapny code B (local currency is USD) - invoice posted in local currency but payment received in AED
system behaviour:-
1. comapny code A for which local currency is AED but payment received in USD - system post exchange rate gain/ loss
2. company code B for which local currency is USD but payment received in AED - system doesn't post exchang
I am not able to understand this behaviour as system configuration is same (as COA is same for both company) for both company and accordingly rate is maintained in OB08.
please share your viewpoint on this.
Regards
DD

Hi Kiron
Thanks for response and link.
But the information given in the link is not my case. in my case system dertermine the correct GL but the problem is its happening in one company code but not in other.
for both company code setting is same for OBY6, OBXL and tolerence limit.
Please revert
Regards
DD

KB11N posting- Exchange rate

Similar Messages

Maybe you are looking for