KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone
Just noticed this; SWEET!
-----ProcedureTo perform a test using the hardware diagnostic tool on the BlackBerry smartphone, complete the following steps:
On the Home screen on the BlackBerry smartphone, click Options.
Select Status.
On the Status screen, type test.Note: On BlackBerry smartphones that support SureType® technology, use the multi-tap input method.
From the menu on the Device Self Test Application screen, select Start.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

This is cool!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Questions on the Hardware requirement mention in the 12c installation guide

Hello experts,
I have a confusion on the Hardware requirements mentioned in the 12c installation guide where they mentioned as below.
RAM with ADP1, JVMD2 8 GB 12 GB 20 GB
1 ADP Manager is Application Dependency and Performance
2 JVMD is JVM Diagnostics
Question 1: what does this RAM with ADP or JVMD mean. is it just the additional RAM space required in the server or does is that special requirement ??
Oracle WebLogic Server JVM Heap 1.7 GB 4 GB 8 GB
Size
Question 2: What is this JVM Heap size ? how do we configure this in the server ??
Thanks in Advance for your Help.

Hi,
#1: It means if you also want to install ADP and JVMD, the total RAM required is a small (e.g. < 1000 targets), medium (e.g. > 1000 targets and < 10000 targets), large EM deployment (e.g. > 10000 targets) is 8 GB, 12 GB, 20 GB, respectively. That is the memory requirement for an OMS host.
#2: The heap size for the OMS java process. You can adjust the heap size by changing the -Xmx<heapsize> (see an example below) in the following file:
<middleware_home>/gc_inst/user_projects/domains/GCDomain/bin/startEMServer.sh
An example of OMS heap size setting of 2048 MB:
if [ "${SERVER_NAME}" != "EMGC_ADMINSERVER" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx1740m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing"
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx2048m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:+CMSClassUnloadingEnabled -XX:CompileThreshold=8000 -XX:PermSize=128m"
Regards,
- Loc

How to determine the hardware requirements based on the Services' payload

hello,Guys
i am wondering if i can calculate the hardware requirements based on the services' payload ?
what factors should i consider when to determine the hardware requirements?
is there any documents related to my questions? ;)
Thanks
Regards
Wen

Payload size is not the only factor while determining size of the system (h/w). You need to consider number of services, nature of services (sync/async), payload size, frequency of messages (load), peak load value, security constraints, performance requirements etc..
You may contact your local Oracle Sales Representative/ Oracle Support to get help in determining size of the system. They will provide you a sizing questionarre and on the basis of that they may suggest sizing as well (Oracle has an internal tool for proposing sizing)
Regards,
Anuj

Can someone help me with the iphone diagnostic tool?

I was trying to use the Iphone diagnostic tool, and i use the ticket number they gave me but it says ticket not found. How can i fix this?

The Magic Wand is subject to the sample size you've set for the color picker.
Yes, I know it seems silly. Personally I think it's a bug that these essentially unrelated things should be connected.
Try this:
1. Open an image.
2. Click the foreground color patch in the tools bar.
3. Right-click on the image somewhere. What's your sample size?
4. Change it to Point Sample.
5. Cancel the Color Picker.
Now your magic wand should work better.
I wouldn't have known this but for having been there myself recently.
-Noel

Hardware Diagnostic Tools (PC-Doctor) won't start on HPE-180t Desktop

Was wondering what caused the following error that caused the Hardware Diagnostics Tools (PC-doctor) to not run.   The platform is an HPE-180t desktop running Windows 7 x64
"pcdrsysinfocsmi.p5x stopped working"
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   pcdrsysinfocsmi.p5x
Application Version:   0.0.0.0
Application Timestamp:   4ab1c462
Fault Module Name:   KERNELBASE.dll
Fault Module Version:   6.1.7601.18015
Fault Module Timestamp:   50b8479b
Exception Code:   c0000005
Exception Offset:   0000000000009e5d
OS Version:   6.1.7601.2.1.0.256.48
Locale ID:   1033
Additional Information 1:   70ca
Additional Information 2:   70cab121e705f86c3530416f9e147728
Additional Information 3:   8aed
Additional Information 4:   8aedfbccaab3b1a984453cd01b4aa9c

Strange as the download was not on this unit's driver/software page, but the newest version I could find was here. It says it's an update, but it is the full version as I was able to install it on a system that did not have this program installed.
To answer your question, it is not necessary to update the Hardware Diagnostics when a hardware component is changed.
Based on this thread, it looks like the specific error you are receiving can be caused by any number or programs. Is Hardware Diagnostics the only one that is exhibiting an issue? The accepted answer in the linked thread is that the profile was at fault and it provided a few suggestion on what to try next. I would start with uninstalling and reinstalling Hardware Diagnostics from the link provided.
If you wanted to, you could use Vision Diagnostics (how to use it is at the bottom of the document) found here. It isn't quite as convenient as other forms as this is a bootable CD and is not executable within Windows. However, it is a more complete diagnostics package in my experience.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Could not use the clone stamp tool because the area to clone has not been defined

Freshly installed Elements 10. Can not use the option-mouse click to define an area for the clone stamp. The error I get is:
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
New Mac Mini. Had the same problems in Elements 9 so I installed the 10 trial. Is this a key binding error? Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system.
I'm not a newbie and know how to use the clone tool. I won't say I'm an expert so if it's something related to layers please throw out some ideas.

This problem came back up. I hadn't used PSE since last November and was frustrated to run into it again. I don't think it's a layers issue afterall.
I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use. Regardless blue tooth is on for these devices. Problem exists. Turn bluetooth off on Air and the problem is gone. It must be related to option key when bluetooth is on, I guess some different mapping. Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
So now where do I look for configs to check?

Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

Are you working with more than one layer? If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer. I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
At least for me this is the case when getting that type of message. I am very new to this program though, so maybe someone else has a more concise answer for you.
Good luck and write again if this doesn't help.
Moon52
Sent from my iPhone

My 6180 has stopped printing the hp diagnostic tool says connectivity is the problem how can i fix

how can i fix the c6180 that has stopped printing the hp diagnostic tool says connectivity is the problem

Hi thefishermanfl,
How is the printer connected to your computer?
The following documents and utility should help you get the printer up and working again. Let me know if you need additional assistance.
HP Print Diagnostic Utility:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&cc=us&dlc=en&lc=en&...
Installing the Printer Software on a Wireless or Wired (Ethernet) Network:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02283715&tmp_task=useCategory&cc=us&dlc=en&jump...
Installing the Product Software for a USB Cable Connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01793627&tmp_task=useCategory&cc=us&dlc=en&jump...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

My sim tray is locked, and whenever I put the sim eject tool in the hole beside it, it will not open, what should i do?

My sim tray is locked, and whenever I put the sim eject tool in the hole beside it, it will not open, what should i do?

Use a small thin piece of plastic (metal tools are likely to scratch the case) and work along the seams of the tray. In all likelihood your tool is unlocking it but the tray itself is a bit gummed up, jammed. Be patient, don't force things, and you'll probably get it open in short order.

I can't see the Quick Develop Tools in the Library Module

I cannot see the Quick Develope tools in the Library Module

Right-click (Cmd-click Mac) on one of the other tabs and make sure there is a checkmark for Quick Develop.

CS6: 'lost' the T Type tool from the left hand tool bar. [was:A question]

I have CS6 and ghave suddenly 'lost' the T Type tool from the left hand tool bar. How do I get it back please?

Do you have the Text on a Path tool in it's place, or no tool at all? If you press and hold any tool with samll triangle in the lower right corner, like the text tool, it will expand to show you the other tools available in that spot.

How can I use the hardware compare feature of the 6551 card to trigger scripts

I can dynamically and seamlessly generate different waveforms by triggering different scriptTriggers that drive one or more of the 4 PFI lines. However, I need to evaluate a channel at a specific location or locations set by a script marker in real-time and generate a different waveform stored in on-board memory based on the result of the evaluation. I have attempted to use the hardware compare feature without any success. I am trying to dynamically respond to an I2C device based on the ACKs or NACK response of the device under test. Can the 6551 card accomplish this? Has anyone successfully tested an I2C or SMBus communication stream with 6551 card?

Hello,
I can understand why hardware compare did not work out for you application. Hardware compare uses a signal that was generated to make a digital pattern and then waits a few clock cycles before acquiring the signal that needs to be compared to the digital pattern.
I would look into using a script trigger to evaluate the channel value, where the script structure controls when it is evaluated. Please note that script triggers will need to be cleared after they are detected for reasserting. Some script syntax actually clear the script trigger and then use a wait until script trigger structure. Please refer to the HS DIO Help for documentation on Common Scripting Use Cases.
Please provide us with further details about your application. The more information, the better! I was not too clear on what you where wanting to evaluate and where is it coming from.
I would also like to mention that National Instruments has a NI USB 8451 which is capable of I2C communication.
NI USB 8451
Samantha
National Instruments
Applications Engineer

When using GPIB hardware, do I need the exact driver[HP-3478a] or can I use simple raw GPIB-read or 488.2-read commands to take measurements?

If so, which would I use in order to take a reading from a lab instrument?
GPIB-read or 488.2-read commands to take measurements?

GPIB and 488.2 are the same thing, so the question if kind of moot. If you have a driver for the instrument then that's the best place to start, as it's quite likely to have been debugged and worked out. You can, however, code up your own communication. You would want to use VISA rather than the lower-level 488.2 commands, as this is the preferred API for programming. VISA is just a layer that sits on top of GPIB and allows you to write code so that you can communicate with a device via a serial or GPIB interface.
You should take a look at the examples that ship with LabVIEW as there's a couple that do basic communication using VISA functions.

Best way to announce that the hardware does not meet the minimum requirements

     Hi Everybody!!!
     I'm in the process of tiding my App up, and I stumbled into a requirement that needs to be addressed. I'm not quite familiar with the latest trends, so I was wondering if anybody could recommend a way to inform the user if the hardware
to use does not meet the minumum requirements.
     In a nutshell:
* I just created a game using Direct3D / DirectX 11,
* I'm using "DrawIndexedInstanced", which means that the videocard to use should meet at least DirectX v10 (my shaders are using model 9_3 but I tested it in a computer with DirectX9 model 3 (or so the nvidia brochure said), and the game pretty
much died in my arms).
* According to the App Certification Requirements: "if you choose a minimum feature level higher than 9_1, your app must detect at launch whether or not the current hardware meets the minimum requirements. If not, the app must display a message to
the customer detailing the Direct3D requirements."
* I know how to detect the Direct3D level supported by the current videocard. What I would like to know is how to tell the user that the videocard does not support the minimum requirements.
     I don't have much knowledge about the current trends:
* I assume that displaying a message box may not be the best option, as that would mean I need to link the MFC layer to do so (the game is in Visual C++ and that's what I would do if it were one of my day-job projects). I'm quite sure that
is too much of a library just to show a message box... not to mention that most likelly the MFC is no longer supported in a Metro application...
* I was thinking about displaying a nice graphic warning about the issue, but if the D3DDevice1 is not what I expect then I don't think I can be sure that at least it can display the graphic with the information.
* I'm not quite sure if I should be linking to a .NET Library ("System.Windows.Forms" comes to mind), but then again maybe it's too much of a library for just a messagebox.
* Then again, displaying that message in a command prompt may not be the best idea either.
     Any help is greatly appreciated!!!
     Best Regards,
     Tarh Ik
Tarh ik

     Hi Chuck,
     I tried your idea, but the game always crashed when calling the DrawIndexedInstanced() function in a computer that only supported DirectX Level 9.1 (plenty of those computers at my day-job, sometimes I swear this office could be
a museum). The crash started as a driver unload call, and after that everything goes down.
     I also tried using the WARP mode, but the performance was horrible, and after a minute of playing I started to have temperature issues with the CPU (I did not see that one coming)
     What I finished doing was to create two sets of shaders (pixel and vertex):
* If the feature reported by D3D11CreateDevice was 9_3 or above, I'd use my very own and happy shaders, compiled in 9_3 model. Beautiful performance with DrawIndexedInstanced().
* If on the other hand the feature reported by D3D11CreateDevice was either 9_2 or 9_1, I'd use a set of shaders compiled for level 9_1. That seemed to be enough to draw a couple of images on the screen and tell the user, using my own game elements,
that the computer did not match the hardware requirements.
      It looks like this was a good approach. My game passed the certification test, and it is currently on the AppStore.
      Best Regards,
      Tarh Ik
PS: This posting has been posted "AS IS"
Tarh ik

Can someone tell me the difference of running the apple diagnostic tool that apple has supply online vs the diagnostic they do at apple?

At apple when the "apple genius" check to see if anything is wrong with your macbook hardware. They would connect an ethernet cable to the macbook and run there diagnostic. Are there any difference between either diagnostic test. And does the apple diagnostic test (the one that they supply instruction online) check all hardware inside? I remember see there screen was much different from the diagnostic screen i just ran (which was all gray with a little progress bar.)

Apple Service Diagnostics (ASD) is very time-consuming and produces results that refer to service procedures not available to the general public. It is not available outside of authorized Apple repair facilities. Without supporting documentation, its results could easily be misinterpreted. Apple also has additional diagnostic procedures for certain specific purposes.
Apple Hardware Test (AHT) is faster and more superficial. It performs cursory tests that do little more than check for the presence or absence of operable hardware.
AHT has been superseded with Apple Diagnostics in Macs produced after June 2013.

KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone

Similar Messages

Maybe you are looking for