KB2565063 installed and not installed, errors 80070643 800B010B

This is weird even by MS standards. I have several servers (but not all) on which KB2565063, C++ Redistributable SP1 fails, but in Control Panel/Programs it says it installed with version 10.0.40219, which is SP1.
In Event Viewer you find error 80070643 (a generic failure) and in Windows Update/View Update History you find failed with error 800B010B (a generic trust failure). I've tried several things, including uninstall/reinstall and repair but they don't work.
If you manually try to install the patch it'll ask you if you want to repair, which means it thinks it's installed. So why on earth does Windows Update and Software Center think it failed?

Hi,
The return code from the update is 80070643. So SCCM thinks it is failed. I suggest you try uninstalling the update and try installing it manually, then observe the log file to determine how the installation goes.
Juke Chou
TechNet Community Support

Similar Messages

  • I was updating i-tunes on my windows vista but it stopped working after that.Since then i have un-installed and re-installed it a dozen times but it shows the same error (Apple error:2

    Hi
    Recently I purchased Iphone 4-s and tried to connect it to my existing i-tunes but it didnt recognise the device. So I tried updating the I-tunes to see if it made a difference but it was no good.
    Hence i followed the trouble shooting and uninstalled and re-installed i-tunes but it wont get installed properly now. Since then I have un-installed and re-installed the complete set of i-tune softwares a dozen times but it still gives me the same error- Apple Error: 2 and Windows Error :2 and report of being unable to install the Apple Application Support software. I have spent 2 1/2 hours talking to the Apple Technical Support Team regarding this but it still hasnt been resolved.( In addition, i have ensured the firewalls are disabled and also opened new user account (admin priviledges) to try and download it)
    Now not only can i use my iphone but also my ipod is out of action in regards to music and downloads.
    I would really really really appreciate anyone helping me in this matter as i am in dire straits now.
    Thank you so much in advance
    Regards

    I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
    When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
    To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005

  • I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITun

    I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITunes is corrupted or is not installed correctly.  Please reinstall Itunes"
    iMac, iOS 6

    HI,
    If your old version of iTunes is still working - then I sugest you stick with that.
    iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
    Just a friendly advise and warning :-)

  • This phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    this phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    Have managed to cure it based upon the following information received -
    I keep having this problem with iTunes when I try to connect my iPod Touch to iTunes. I keep getting this error message: "This iPod cannot be used because the required software is not installed".
    What I did:
    Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
    I have already done this required step about a hundred times and I am still getting this same error so if you have any idea of what I can do please help.
    Solution
    I was running the 64-bit version if iTunes, and I did uninstall and re-install just to make sure -- no luck. Turns out there's a really easy solution, I'll spare you the detail of how I figured it out, but if you encounter the same issue, here's the solution:
    1) Using WinRAR (or any other decent archiving program), extract iTunesWindows64Setup.exe
    2) Right click on AppleMobileDeviceSupport64.msi and choose Properties.
    3) Switch to the Compatibility tab and check the "Run this program in compatibility mode for:" box, and select your only option, "Previous versions of Windows", in the drop-down box.
    4) Click OK
    5) Double click the AppleMobileDeviceSupport64.msi
    6) Tell it to Repair your current installation
    7) Done!

  • I bought creative cloud just now and have only the option of "TRY" and not "Install"-why?

    i bought creative cloud just now and have only the option of "TRY" and not "Install"for  photoshop, after effects and Illustrator -why?

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

    Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

    Check if this helps. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
    ~ Arpit

  • I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and i was using it just fine yesterday.

    I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and I was using it just fine yesterday.
    2015-02-24_1129 - DavidIpromote's library

    Try resetting Photoshop Preferences.   Use your Photoshop start icon to launch Photoshop and immediately press and hole Shift+Ctrl|CMD+Alt|Option keys   Photoshop should Prompt you with Do you want your Preferences deleted. Reply yes.   Photoshop should then delete your user ID preferences and then create a default set of preferences for your ID and start successfully.

  • Why are my pending apps in the update screen saying open and not install. Can't get rid of the badges because of this.

    In the App Store on my iPad and iPhone the updates screen has gone squiffy.
    When I have updates pending they say open on the button and not install. When I click it, it opens the app instead of installing the update and the badges for the updates will not go away.

    susanfromrichmond hill wrote:
    I got a warning that I was going to lose all my content including content and I am assuming the paid for Apps that I have.
    Yes.  When you do a restore, it will erase everything that is currently on your iphone and put everything you had from your last backup back onto your iphone.  BTW, you could always redownload your paid apps for free.
    Was trying to figure out if there is a way to delete individual apps from the iPhone.?
    To delete individual apps, hold onto the icon until it wiggle. You should see an "x" on the top. Just hit the "x", You cannot, however, delete apps that Apple put on the iphone. Those apps will not have an "x".

  • I did download Lion and everything is fine, but why in app store still stated DOWNLOAD and not INSTALLED, I already did 3 times and it still in DOWNLOAD label

    I did download Lion and everything is fine, but why in app store still stated DOWNLOAD and not INSTALLED, I already did 3 times and it still in DOWNLOAD label

    My guess is they changed that to Download for all the people who wanted to or needed to download it again. It's kind of a subset of Installed, now. I don't think it is a great solution, but that is what it is.

  • I had been using iCould without problems, but recently my tasks have been disappearing from my PC and my tasks and calendar do not sync or update between my iPad and PC.  I have un-installed and re-installed iCloud on my PC twice.  Suggestions?

    I had been using iCould without problems, but recently my tasks have been disappearing from my PC and my tasks and calendar do not sync or update between my iPad and PC.  I have un-installed and re-installed iCloud on my PC twice.  Suggestions?

    I had been using iCould without problems, but recently my tasks have been disappearing from my PC and my tasks and calendar do not sync or update between my iPad and PC.  I have un-installed and re-installed iCloud on my PC twice.  Suggestions?

  • Can you install the new Bootcamp and NOT install 10.5?

    I have a laptop that I use to do page layout. It took FOREVER to get my print output settings in quark, photoshop, etc just right.
    I am currently running the old bootcamp beta. I need to install the new version of bootcamp and its drivers so I can run updates to my Windows partition. I DONT want to install OSX 10.5. Can I install bootcamp and not install 10.5 or am I stuck?

    Jason:
    The only way that I know to get the boot camp 2.0 drivers is from the Leopard Installation Disk. You indicated that you want to keep Tiger installed. You also indicated that you have the beta version of boot camp already running. You are in a good situation to update to 2.0 boot camp drivers.
    The catch? You will still need the Leopard Installation Disk as you will need to insert that while booted in Windows to start and finish the update process. All of the necessary drivers are on the Leopard CD.
    I have a Leopard Installation disk, then simply boot into Windows and get to the Windows desktop. Insert the Leopard installation disk and it will begin updating the drivers. You can leave the Tiger partition as is.
    Axel F.

  • JRE 1.4.2_04 install and un-install issues

    I was having problems running a Java app and I decided to un-install and re-install my JRE. I am running Windows XP Pro SP1 and IE6 SP1 as well. I went to "Add remove programs" and I noticed I had both of the following:
    Java 2 Runtime Environment, Standard Edition 1.4.2_03
    Java 2 Runtime Environment, Standard Edition 1.4.2_04
    I uninstalled revision 3 ok, but unistalling revision 4 gives me this error:
    "Failed to extract file 'Dll_ini' from binary table"
    I get the same exact error trying to re-install Java 2 Runtime Environment, Standard Edition 1.4.2_04
    I'm stuck here... can anyone lend a hand?

    So... 14 hours later...
    I found a mirror site that had JRE 1.4.2_03 and I downloaded and installed it and I was able to run the apps, but I still could not un-install revision _04
    I did these 5 things and was able to get JRE 1.4.2_04 installed. Actaully, once the Sun license acceptance page came up on install I canceled it because the errors Iwas getting previously happened prior to the License page, so I knew it work. I un-installed revision _03 and then installed revision _04 with the hopes of squelching further errors.
    1. Check and make sure msiexec.exe is not in memory. If it is, and no setup is running at the time, end that task and restart the system. Alternatively, try START, RUN, type "msiexec /unregister", OK and then START, RUN, type "msiexec /regserver", OK
    2. Clean out the Temp directory. C:\Documents and Settings\<USER NAME HERE>\Local Settings\Temp
    3. Delete the C:\Program Files\Common Files\InstallShield\Driver folder and then rerun the setup.
    4. The other potential cause is a missing Stdole.tlb, stdole32.tlb, or stdole2.tlb file. These are core Windows files and should exist on your machine.
    5. I ran SFC.EXE, I did have core WinXP Pro files missing. See MS Knowledge Base article Q310747 http://support.microsoft.com/default.aspx?scid=kb;EN-US;310747
    Some of the InstallShield info came from here http://support.installshield.com/kb/view.asp?pcode=ALL&articleid=Q105416&source=support_central&product=wind
    Hope this helps you all!

  • Photoshop CS2 un-installed and re-installed without de-activavtion. Activation window refuses to procede.

    ? Photoshop CS2 on Windows Vista. On start-up PS refuses access. Decided to un-install and re-install, unfortunately not thinking of de-activation. Now, on start-up, window offers registration which always fails. I am not offered help>de-activation, or help>transfer activation. Help>Adobe Forum!

    Did you use the right serial number? The windows download is 348MB the Mac download is 441MB If your was 380MB there may be a problem with what you downloaded... If you can not get it to install you may have to contact Adobe customer Support. However CS2 is no longer suppoorted.

  • Since most recent OS update, my iMac intel won't open my HP Officejet 4500 scanner. I have un-installed and re-installed the 10.8.3 update and the dame with HP drivers. I get the essage (HP scanner won't open because of a problem". Suggestions???

    Since most recent OS update, my iMac intel won't open my HP Officejet 4500 scanner. I have un-installed and re-installed the 10.8.3 update and the dame with HP drivers. I get the essage (HP scanner won't open because of a problem". The printer works, but not the scanner. Suggestions???

    It's possible that you need new drivers from HP, in order to be compatible with OS X 10.8.3. Looking at HP website, they haven't released new drivers since last November. You might need to wait for new drivers or contact HP to push for an update.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=3919448#N218

  • I downloaded Acrobat XI Pro onto my work computer on Friday. It downloaded in French though I indicated I needed English. I de-installed and re-installed several times but always French. How do I change that option?

    I downloaded Acrobat XI Pro onto my work computer on Friday. It downloaded in French though I indicated I needed English. I de-installed and re-installed several times but always French. How do I change that option?

    Hello,
    you could adapt the answer from there Re: Change language in Acrobat XI Pro - It does not work
    ... and if your Acrobat XI Pro is a part of CC you could work according to this scheme Adjust the install language | CCM >>> I quote: The language for the Creative Cloud applications is different from what you expect.
    Hans-Günter

Maybe you are looking for