KB2879017 setup error - failed to migrate dependent packages
Hi this error "KB2879017 setup error - failed to migrate dedpendent packages" during installation of Microsoft Security pacthes at Windows XP SP3 pc . I'm using IE7 (version 7.0.5730.13) . Below logs the error. Anyone can advice?
275.407: Destination:C:\Program Files\internet explorer\iexplore.exe (7.0.6000.21357)
275.407: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is empty; nothing to do.
275.407: MigrateHotfix: Migrating hotfix KB2586448-IE8
275.407: QFE KB2586448-IE8 has no backup directory to migrate.
275.407: Migrating QFE KB2586448-IE8 with command line: update.exe -Z -Q -B:sp3qfe
289.797: Update.exe failed 1603.
289.797: MigrateHotfixes: Migration of KB2586448-IE8 failed
289.797: DoInstallation: Migration failed
290.641: Failed to migrate dependent packages.
351.032: Message displayed to the user: Failed to migrate dependent packages.
351.032: User Input: OK
351.032: Update.exe extended error code = 0xf0ea
351.032: Update.exe return code was masked to 0x643 for MSI custom action compliance.
This forum is for questions and issues with the MAP Toolkit. You will need to post this question in a forum that is related to the software you are having trouble with.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.
Similar Messages
-
How to Uninstall SQL instance on active-passive SQL server , which failed during Cluster Setup (Error-Failed at Validate Active Directory Configuration)
active-passive SQL server cluster setup failed due to some steps missed in initial cluster setup,
now i have unistall sql instance from nodes,
Your help will higly appriciated.
Regards,
Anish
AsandeenHello,
Please refer to the following link about remove a node of SQL Server Failover Cluster Instance:
http://msdn.microsoft.com/en-us/library/ms191545.aspx#Remove
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Big Data Extension Serengeti Server setup Error : Failed to Retrieve VC Properties.
Hello,
I installed the Vsphere Big Data Extension 2.0.0.951. i connected the vcenter server with serengeti server, configured big data cluster
But when i logged in to management server i am getting following initialization status Error.
i checked the VC FQDN and ips are correct.
I unregistered and register big data extension but still this error exist
what could be the issue and how can i resolve it?on the vsphere big data extension management server its shows initialization status success but i when i look the cluster i am getting following error.
-
Setup Error when trying to install any adobe CS6 Product
I have analyzed the PDApp.log after trying to install any product, as Photoshop or Flash Pro (where I get "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem."), and there's 1 particular part, that seems to attract my attention:
"[FATAL] Setup - Error installing C:\(installation path)\packages\core\PDApp.pimx package.
Return Value of pim_installPackage = -1"
Before, the log also says that getInstalledPackageSize: Package folder does not exist on the system.Hi compsai,
There might be insufficent permissions. Please try the following :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave -
Alert log: failed to establish dependency between database and diskgroup
Hi, I have a database 11.2.0 with ASM. When I startup an instance I see this error in alert log:
ERROR: failed to establish dependency between database SPBUFOR and diskgroup resource ora.SPBUFOR_FLASH.dg
SPBUFOR_FLASH is a diskgroup where a flash recovery area is located.
Database is opened cleanly but I need to know that everything works fine.
How can I resolve this issue ?ASM ALERT LOG:
Wed Oct 05 15:35:12 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/11.2.0/grid/dbs/arch
Autotune of undo retention is turned on.
IMODE=BR
ILAT =0
LICENSE_MAX_USERS = 0
SYS auditing is disabled
NOTE: Volume support enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option.
Using parameter settings in server-side spfile +CSA_DATA/asm/asmparameterfile/registry.253.758208241
System parameters with non-default values:
large_pool_size = 12M
instance_type = "asm"
remote_login_passwordfile= "EXCLUSIVE"
asm_diskgroups = "CSA_FLASH"
asm_diskgroups = "SPBUFOR_DATA"
asm_diskgroups = "SPBUFOR_FLASH"
asm_power_limit = 1
diagnostic_dest = "/u01/app/oracle"
Wed Oct 05 15:35:13 2011
PMON started with pid=2, OS id=24108
Wed Oct 05 15:35:14 2011
VKTM started with pid=3, OS id=24112 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Oct 05 15:35:14 2011
GEN0 started with pid=4, OS id=24118
Wed Oct 05 15:35:14 2011
DIAG started with pid=5, OS id=24122
Wed Oct 05 15:35:14 2011
PSP0 started with pid=6, OS id=24127
Wed Oct 05 15:35:14 2011
DIA0 started with pid=7, OS id=24131
Wed Oct 05 15:35:14 2011
MMAN started with pid=8, OS id=24135
Wed Oct 05 15:35:14 2011
DBW0 started with pid=9, OS id=24139
Wed Oct 05 15:35:14 2011
LGWR started with pid=10, OS id=24143
Wed Oct 05 15:35:14 2011
CKPT started with pid=11, OS id=24148
Wed Oct 05 15:35:14 2011
SMON started with pid=12, OS id=24157
Wed Oct 05 15:35:14 2011
RBAL started with pid=13, OS id=24163
Wed Oct 05 15:35:14 2011
GMON started with pid=14, OS id=24173
Wed Oct 05 15:35:14 2011
MMON started with pid=15, OS id=24177
Wed Oct 05 15:35:14 2011
MMNL started with pid=16, OS id=24181
ORACLE_BASE from environment = /u01/app/oracle
Wed Oct 05 15:35:15 2011
SQL> ALTER DISKGROUP ALL MOUNT
NOTE: Diskgroups listed in ASM_DISKGROUPS are
CSA_FLASH
SPBUFOR_DATA
SPBUFOR_FLASH
Diskgroup with spfile:CSA_DATA
NOTE: cache registered group CSA_DATA number=1 incarn=0x75fe76df
NOTE: cache began mount (first) of group CSA_DATA number=1 incarn=0x75fe76df
NOTE: cache registered group CSA_FLASH number=2 incarn=0x760e76e0
NOTE: cache began mount (first) of group CSA_FLASH number=2 incarn=0x760e76e0
NOTE: cache registered group SPBUFOR_DATA number=3 incarn=0x760e76e1
NOTE: cache began mount (first) of group SPBUFOR_DATA number=3 incarn=0x760e76e1
NOTE: cache registered group SPBUFOR_FLASH number=4 incarn=0x761e76e2
NOTE: cache began mount (first) of group SPBUFOR_FLASH number=4 incarn=0x761e76e2
NOTE: Loaded library: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
NOTE: Assigning number (1,0) to disk (ORCL:CSA_D1)
NOTE: Assigning number (1,1) to disk (ORCL:CSA_D2)
NOTE: Assigning number (2,0) to disk (ORCL:CSA_F1)
NOTE: Assigning number (2,1) to disk (ORCL:CSA_F2)
NOTE: Assigning number (3,0) to disk (ORCL:SPBUFOR_D1)
NOTE: Assigning number (3,1) to disk (ORCL:SPBUFOR_D2)
NOTE: Assigning number (3,2) to disk (ORCL:SPBUFOR_D3)
NOTE: Assigning number (4,0) to disk (ORCL:SPBUFOR_F1)
NOTE: Assigning number (4,1) to disk (ORCL:SPBUFOR_F2)
NOTE: start heartbeating (grp 1)
kfdp_query(CSA_DATA): 6
kfdp_queryBg(): 6
NOTE: cache opening disk 0 of grp 1: CSA_D1 label:CSA_D1
NOTE: F1X0 found on disk 0 au 2 fcn 0.0
NOTE: cache opening disk 1 of grp 1: CSA_D2 label:CSA_D2
NOTE: cache mounting (first) external redundancy group 1/0x75FE76DF (CSA_DATA)
NOTE: cache recovered group 1 to fcn 0.25573
NOTE: LGWR attempting to mount thread 1 for diskgroup 1 (CSA_DATA)
NOTE: LGWR found thread 1 closed at ABA 4.2486
NOTE: LGWR mounted thread 1 for diskgroup 1 (CSA_DATA)
NOTE: LGWR opening thread 1 at fcn 0.25573 ABA 5.2487
NOTE: cache mounting group 1/0x75FE76DF (CSA_DATA) succeeded
NOTE: cache ending mount (success) of group CSA_DATA number=1 incarn=0x75fe76df
NOTE: start heartbeating (grp 2)
kfdp_query(CSA_FLASH): 8
kfdp_queryBg(): 8
NOTE: cache opening disk 0 of grp 2: CSA_F1 label:CSA_F1
NOTE: F1X0 found on disk 0 au 2 fcn 0.0
NOTE: cache opening disk 1 of grp 2: CSA_F2 label:CSA_F2
NOTE: cache mounting (first) external redundancy group 2/0x760E76E0 (CSA_FLASH)
NOTE: cache recovered group 2 to fcn 0.49881
NOTE: LGWR attempting to mount thread 1 for diskgroup 2 (CSA_FLASH)
NOTE: LGWR found thread 1 closed at ABA 3.5793
NOTE: LGWR mounted thread 1 for diskgroup 2 (CSA_FLASH)
NOTE: LGWR opening thread 1 at fcn 0.49881 ABA 4.5794
NOTE: cache mounting group 2/0x760E76E0 (CSA_FLASH) succeeded
NOTE: cache ending mount (success) of group CSA_FLASH number=2 incarn=0x760e76e0
NOTE: start heartbeating (grp 3)
kfdp_query(SPBUFOR_DATA): 10
kfdp_queryBg(): 10
NOTE: cache opening disk 0 of grp 3: SPBUFOR_D1 label:SPBUFOR_D1
NOTE: F1X0 found on disk 0 au 2 fcn 0.0
NOTE: cache opening disk 1 of grp 3: SPBUFOR_D2 label:SPBUFOR_D2
NOTE: cache opening disk 2 of grp 3: SPBUFOR_D3 label:SPBUFOR_D3
NOTE: cache mounting (first) external redundancy group 3/0x760E76E1 (SPBUFOR_DATA)
NOTE: cache recovered group 3 to fcn 0.317867
NOTE: LGWR attempting to mount thread 1 for diskgroup 3 (SPBUFOR_DATA)
NOTE: LGWR found thread 1 closed at ABA 3.8570
NOTE: LGWR mounted thread 1 for diskgroup 3 (SPBUFOR_DATA)
NOTE: LGWR opening thread 1 at fcn 0.317867 ABA 4.8571
NOTE: cache mounting group 3/0x760E76E1 (SPBUFOR_DATA) succeeded
NOTE: cache ending mount (success) of group SPBUFOR_DATA number=3 incarn=0x760e76e1
NOTE: start heartbeating (grp 4)
kfdp_query(SPBUFOR_FLASH): 12
kfdp_queryBg(): 12
NOTE: cache opening disk 0 of grp 4: SPBUFOR_F1 label:SPBUFOR_F1
NOTE: F1X0 found on disk 0 au 2 fcn 0.0
NOTE: cache opening disk 1 of grp 4: SPBUFOR_F2 label:SPBUFOR_F2
NOTE: cache mounting (first) external redundancy group 4/0x761E76E2 (SPBUFOR_FLASH)
NOTE: cache recovered group 4 to fcn 0.16114
NOTE: LGWR attempting to mount thread 1 for diskgroup 4 (SPBUFOR_FLASH)
NOTE: LGWR found thread 1 closed at ABA 2.1922
NOTE: LGWR mounted thread 1 for diskgroup 4 (SPBUFOR_FLASH)
NOTE: LGWR opening thread 1 at fcn 0.16114 ABA 3.1923
NOTE: cache mounting group 4/0x761E76E2 (SPBUFOR_FLASH) succeeded
NOTE: cache ending mount (success) of group SPBUFOR_FLASH number=4 incarn=0x761e76e2
kfdp_query(CSA_DATA): 13
kfdp_queryBg(): 13
NOTE: Instance updated compatible.asm to 11.2.0.0.0 for grp 1
SUCCESS: diskgroup CSA_DATA was mounted
kfdp_query(CSA_FLASH): 14
kfdp_queryBg(): 14
NOTE: Instance updated compatible.asm to 11.2.0.0.0 for grp 2
SUCCESS: diskgroup CSA_FLASH was mounted
kfdp_query(SPBUFOR_DATA): 15
kfdp_queryBg(): 15
NOTE: Instance updated compatible.asm to 11.2.0.0.0 for grp 3
SUCCESS: diskgroup SPBUFOR_DATA was mounted
kfdp_query(SPBUFOR_FLASH): 16
kfdp_queryBg(): 16
NOTE: Instance updated compatible.asm to 11.2.0.0.0 for grp 4
SUCCESS: diskgroup SPBUFOR_FLASH was mounted
SUCCESS: ALTER DISKGROUP ALL MOUNT
SQL> ALTER DISKGROUP ALL ENABLE VOLUME ALL
SUCCESS: ALTER DISKGROUP ALL ENABLE VOLUME ALL
NOTE: diskgroup resource ora.CSA_DATA.dg is online
NOTE: diskgroup resource ora.CSA_FLASH.dg is online
NOTE: diskgroup resource ora.SPBUFOR_DATA.dg is online
NOTE: diskgroup resource ora.SPBUFOR_FLASH.dg is online
Wed Oct 05 15:35:44 2011
Starting background process ASMB
Wed Oct 05 15:35:44 2011
ASMB started with pid=18, OS id=24330
Thu Oct 06 11:48:19 2011
SQL> alter diskgroup SPBUFOR_DATA check all
NOTE: starting check of diskgroup SPBUFOR_DATA
kfdp_checkDsk(): 17
kfdp_checkDsk(): 18
Thu Oct 06 11:48:30 2011
kfdp_checkDsk(): 19
SUCCESS: check of diskgroup SPBUFOR_DATA found no errors
SUCCESS: alter diskgroup SPBUFOR_DATA check all
Thu Oct 06 11:48:56 2011
SQL> alter diskgroup SPBUFOR_FLASH check all
NOTE: starting check of diskgroup SPBUFOR_FLASH
kfdp_checkDsk(): 20
kfdp_checkDsk(): 21
SUCCESS: check of diskgroup SPBUFOR_FLASH found no errors
SUCCESS: alter diskgroup SPBUFOR_FLASH check all -
Setup Error message in Query Designer
Hi all,
I have built a BW IP query with an aggregate as infoprovidor. In order to make the query plannable I have to use all KF and Characteristic and set the correct filtervalues. I have executed this specific query many times in order to check if all rows/columns are filled ok and are plannable but the last time I executed the query the following error message popped up :
"Setup Error Failed to load resources from resource file. Please check your setup"
When I click OK the Query Designer shuts down. When I then start the Query Designer again and want to select my query the same error message appears so I cannot access my query anymore.
I am going to built a new one but like to know the probable cause of this error message as my query was consistent for sure.
Thanks!
Raymond FlatonDid you find a solution to this? we are having the same issue
-
Since a few days, I get errors when synchronizing SCCM with the WSUS server. In wsyncmgr.log following errors appear:
*** [42000][701][Microsoft][ODBC SQL Server Driver][SQL Server]There is insufficient system memory to run this query. : sp_SetupSDMPackage
For this error, I tried the suggested solution in
http://social.technet.microsoft.com/Forums/en-US/configmgrsum/thread/e45e72f5-cf1b-4089-8522-c686562bce95 but the server max mem has already it's maximum value
Next error is:
Failed to sync update 1847ae6d-8360-4e5a-9d15-da82b24deffd. Error: Failed to create SDM package Site_C4C56584-A6AC-4E0F-85E3-AF1ED3C1C96F/SUM_1fd4eb6d-808f-4693-bf9a-425fdc345c9a(2). CSDMTypeSource error: -1. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
I haven't found anything related to this error yet.
These 2 error messages appear for 5 updates and the the synchronization fails because of too many consecutive failures.
I'm struggling a few days with these errors, any suggestions on how to resolve this?
Thanks!
Pieter-JanHi,
Restart the SQL services then try again. If the pb still here, so please check the min server memory + max server memory from SQL mgmt studio, then If max server memory is a value close to the value of min server memory, increase the max server
memory value. In plus, verify the size of the paging file and increase it. Also don't forget also to install the last service pack and updates of SQL server. I've seen that with SQL 2005 SP2 and it was a known bug that has been solved with cu8,
but now we have the SP4.
Bechir Gharbi | http://myitforum.com/cs2/blogs/bgharbi/ -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
Microsoft SQL Server 2014 Setup error: Wait on the Database Engine recovery handle failed
Hi,
Having this annoying error trying to install SQL Server 2014 (RTM). I saw it's been asked several times... But each post seems a different cause and no definitive answer...
I'm not doing an upgrade, so no "sa account" issue.
Tried different media. Even three different distributions: trial, Standard and Enterprise.
Tried disabling Microsoft antivirus/firewall.
Of course tried restarting, updating, installing, uninstalling, repairing, etc., etc.
I noticed the users folders under C:\Users weren't created. (Maybe something related to permissions?) After playing around, I managed for the users to be created and the service started. Though I couldn't log in.Summary for last "repair" attempt:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068578302
Start time: 2014-04-27 23:54:21
End time: 2014-04-27 23:59:48
Requested action: Repair
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for LocalDB: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: CHARLY13C
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered Configured
SQL Server 2012 DENALI MSSQL11.DENALI Database Engine Services 1033 Enterprise Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB 1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2014 HEKATON MSSQL12.HEKATON Database Engine Services 1033 Enterprise Edition 12.0.2000.8 No Yes
SQL Server 2014 HEKATON MSSQL12.HEKATON Full-Text and Semantic Extractions for Search 1033 Enterprise Edition 12.0.2000.8 No Yes
SQL Server 2014 HEKATON MSSQL12.HEKATON Data Quality Services 1033 Enterprise Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Basic 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Complete 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Connectivity 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
User Input Settings:
ACTION: Repair
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASCONFIGDIR: Config
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
ENU: true
FAILOVERCLUSTERGROUP: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$HEKATON
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: HEKATON
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
QUIET: false
QUIETSIMPLE: false
SQLSVCACCOUNT: NT Service\MSSQL$HEKATON
SQLSVCPASSWORD: <empty>
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84B40002
Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84B40002
Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84B40002
Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\SystemConfigurationCheck_Report.htm -
Lenovo Settings Dependency Package for Windows 8.1 - fails on T440s
Hello everybody,
I just tried to install the Lenovo Settings Dependency Package for Windows 8.1 on my T440s and it repeatedly tells me that it fails because mfplatt.dll is missing. Has anybody experienced that and knows how to proceed in this case?
Thanks for your helpI confirm the problem on T510 too.
I have Windows 8.1 PRO N.
I installed the windows Windows6.3-KB2835517-x64.msu windows media package.
After this, I can restart Lenovo Settings Dependency Package and it works wright, without the error on MFPlat.dll
And after it works, my camera started to work correctly!
Bye -
Hi,
When I try to install a trial product like photoshop cs6 or master collection cs6 I keep getting the error " Installer failed to initialized". I used Adobe cleaner to remove all cs6 products and tried again, but no luck, the same error.
I opened the the log file and found that line :
[FATAL] Setup - Error installing C:\Users\moshe-a\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx package.
Return Value of pim_installPackage = -1
Any idea how to fix the problem?
Thank you, Momustart at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html -
OfficeJet 6700 Premium - Failed to find driver packages to process error
I am getting error 2147467259 failed to find driver packages to process error when trying to install a new HP 6700 Premium. I am running Windows 7 64-bit. I have tried to manually download drivers from HP site, have tried USB and wireless setups, run scrubber utility, and clean boot. Nothing seems to work and I'm at a loss. Any suggestions would be very welcome!
Hi there kray931,
Welcome to the Forums
I'm sorry to see that you are having an issue installing your 6700 Premium. I also noticed that you have already ran the scrubber utility and a clean boot which did not resolve the issue. Another suggestion I have for you would be to run Microsoft's Fix it tool which is meant to fix corrupt registry keys and helps out with problems installing/uninstalling.
Fix problems that programs cannot be installed or uninstalled
After running that tool, try to reinstall the software.
I hope this helps!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
VijayBut have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein -
Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered -
If anyone is able to solve this they are a genius (or I am doing something very stupid!)
I am trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit PC but setup.exe fails due to a msxml3.dll error.
Following a big bundle of recent Windows 7 updates, I started getting 'bad image' msxml3.dll error messages when opening any CS5.5 master collection program (Eg Premiere / Photoshop / Illustrator / Dreamweaver). Following advice on some threads here I tried uninstalling and then using the Adobe CC Cleaner Tool to clean up install, then reinstalling from my original DVD media.
Whenever I try using run setup.exe from installtion disc 1 the installing fails due to 'Missing files'. I have also tried dowloading trial versions and runing setup.exe fro mthe downloaded files but i still get the same message.
I have searched the forum and others have experienced this error but none of the solutions I have found seem to be working for me - as many seem to relate to download installations whereas I am installing from original DVD media (which worked fine before on the same PC)
These are the FATAL messages from the PDApp log
12/11/2014 15:29:27 [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154
12/11/2014 15:29:27 [FATAL] Setup - Could not initialize ADXML object
12/11/2014 15:29:27 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
The PDApp troubleshooting seems to indicate that this is caused by error in downloads but I am getting it with both original media DVD and downloads.
I have also tried using my logon (which has admin privileges) and under our main admin account - and I get the same errors.
Is a clean install of Windows 7 + CS5.5 my only option?
Any help / info / advice / solutions very much appreciated! I have spent the last 2 days trying to sort this out and seem to be getting nowhere.
Thanks.Thanks for the reply kglad - much appreciated.
I have already tried that option (along with downloading files) as it was one of the solutions mentioned on other threads, but that also failed.
Any other ideas?
Maybe you are looking for
-
Background job within another background job
Hello Experts, I have a BDC program (for BW tcode OLI7BW) which executes by scheduling a number of background jobs. This report works fine when run manually. But doesn't work if it is scheduled as a background job through SM36. The status of the job
-
*OS Command in the File Adapter
Hi all, I am trying a scenario where in the username,time,date must be appended to my pay load. For I am trying using the batcth file with out using udfs. In my output file i need username,time,date info based on the login(suppose some user tests my
-
Spam email about iTunes billing?
I received an email about an iTunes billing problem implying a 3rd party may be using my account. It seems a bit sketchy to me, is it spam? Has anyone else received anything similar?
-
How can I import my library as mp3 or AAC 256
Under iTunes 10.7 you use to be able to import your Music (Hard drive iTunes Music Library) into iTunes as a different format. Useful when space was limited with MBP or you needed to create a new library of MP3 for your car or another type portable t
-
Hello all, Is there a way to get linear TC or SMPTE into logic, as in thru an audio track, so that it will use that in it's BWAV timestamp, without using a MTC syncronizer? The Motu 828MKII has a TC in, and DP will sync to LTC or SMPTE, but can't fin