KB2909210 on Server 2008 R2 breaks my intranet sites and print dialog box

Let's try this again. I have been asking the following question of Microsoft and every time I do, I have only been told to try another forum.
I have several intranet sites that my users use for various data entry and querying purposes. I installed Internet Explorer 10 onto my 2008 R2 Terminal Server over this past weekend (10/18/2014) which also installed the Security Update KB2909210
and rebooted the server. On Monday morning (10/20/2014), when my terminal users logged into the sites, the sites began malfunctioning. All the dropdown arrows turned into question marks. Some fields which normally have a small "x"
on the right-hand side used to erase the data entered in the text field were also displaying as question marks. The objects still functioned but it was disconcerting to my users. The update also slowed down these same intranet sites to where it
began interfering with productivity. I activated Compatibility View for all intranet sites, but it did not resolve the problem.
I also found that when my terminal users tried to print a pdf document from the intranet sites, the print dialog box was jumbled and no fields were pre-populated with data like they always are when printing. I updated to the latest Adobe Reader, but
the print dialog box remained jumbled.
All of my users with stand-alone PCs have IE 10 installed and the intranet sites work fine. The sites display properly and process quickly, and the print dialog box is not jumbled. It is only my terminal users who log in from a thin client
to their profiles on the server and use the IE version installed on the server who have the problem with IE10. The KB2909210 Update is not installed on, and does not come up as, an update for any of my stand-alone Windows 7 PCs.
I uninstalled IE 10 from my server, but since this was one of my production servers, I could not restart it until after the plant was shut down for the evening forcing my users to suffer with the slowness for the day. This morning (10/21/2014) the
intranet sites are working fine through IE 9. I also had to revert back to Adobe Reader v9.5 as the v11 (and v10) print dialog box does not display properly in IE 9.
I do not want to stay on IE 9 on my server as IE9 gets more un-secure by the day and we've found IE 11, on any of our machines, to be too buggy.
How can I install IE 10 with its security updates and prevent it from breaking my intranet sites and print dialog box? What is so different about Server 2008 R2 and Windows 7 that IE 10 causes this corruption of intranet sites and the print dialog
box on the Server but not on the Win 7 machines?
The bulletin here:
https://technet.microsoft.com/library/security/ms14-011
is useless for determining why it breaks my intranet sites. Nor does it explain why the update destroys the print dialog box.

Hi,
In my opinion, it's hard to say your problem caused by KB2909210. Have you tried to uninstall this update for test if your intrant site's problem resolved?
If your problem truthfuly caused by this updates, you can choose to hid the update as a workaround method.
Roger Lu
TechNet Community Support

Similar Messages

KB2909210 on Server 2008 R2 breaks my intranet sites

I have several intranet sites that my users use for various data entry and querying purposes. I installed Internet Explorer 10 onto my 2008 R2 Terminal Server over this past weekend which also installed the Security Update KB2909210 and rebooted the
server. On Monday morning, when my terminal users logged into the sites, the sites began malfunctioning. All the dropdown arrows turned into question marks. Some fields which normally have a small "x" on the right-hand side used
to erase the data entered in the text field were also displaying as question marks. The objects still functioned but it was disconcerting to my users. The update also slowed down these same intranet sites to where it began interfering with productivity.
I activated Compatibility View for all intranet sites, but it did not resolve the problem.
I also found that when my terminal users tried to print a pdf document from the intranet sites, the print dialog box was jumbled and no fields were pre-populated with data like they always are when printing. I updated to the latest Adobe Reader, but
the print dialog box remained jumbled.
All of my users with stand-alone PCs have IE 10 installed and the intranet sites work fine. They display properly and process quickly. It is only my terminal users who log in from a thin client to their profiles on the server and use the IE version
installed on the server who have the problem with IE10. The KB2909210 Update is not installed on, and does not come up as, an update for any of my stand-alone Windows 7 PCs.
I uninstalled IE 10 from my server, but since this was one of my production servers, I could not restart it until after the plant was shut down for the evening forcing my users to suffer with the slowness for the day. This morning the intranet sites
are working fine through IE 9. I also had to revert back to Adobe Reader v9.5 as the v11 (and v10) print dialog box does not display properly in IE 9.
I do not want to stay on IE 9 on my server as it gets more un-secure by the day and we've found IE 11 to be too buggy so far.
How can I install IE 10 with its security updates and prevent it from breaking my intranet sites?

I would re ask this in a different forum as this is a Small business server forum and I'm assuming you aren't running that platform?
Or call 1-800-microsoft and issues with a security patch are ultimately comp'd back to you.
This re-asking in forum after forum after forum is ridiculous! When someone else has this problem and searches for it, they will get several useless results with the only responses being to ask in another forum.
This was originally posted in the Microsoft Community forum. The MS Forum Moderator over there advised I should post it here and gave a link in her response. God forbid she had just moved it to the correct forum as I've seen done on countless
other forums!

Print Dialog Box for Addon is not showing in Terminal Server

Dear All,
I have created a addon for Automatic Sales Invoice printing that prints the crystal report directly to the printer bu opening a
print dialog box for printer selection through SDK code.
The Same addon works fine on the server with print dialog box being showing through SDK code.
But while running on Terminal Server , print dialog box is not showing any printer though printers are redirected to that
terminal server.I am not getting whether the problem is in my addon or in the terminal server printer settings.
Please suggest as i need to know the reason urgently.
Thanks
Amit

Hello Edward,
Thanks for your reply .
But the problem is that while running on normal server the print dialog box appear with the printer name in my addon for printer selection .
But while using terminal server , the print dialog box is not getting any printer in the dialog box .That's the major concern for me
is their any way to check that why the printers are not showing in print dialog box.
Thanks ,
Amit

WDS on server 2008 std breaking .WIM files

Hi,
SUMMARY - 'Importing images into WDS seems to break them'
I'm a bit green so i appologise if I'm being stupid. I'm installing and configuring WDS and MDT deployment within a mixed MS 2003 domain environment. We need to be able to deploy 32 bit images and the server will be used for servicing images as well
as deploying and so (I think) I need to use Server 2008 standard as creating catalogue files on x64 systems for x86 images doesn't work.
So - the system is:
Server 2008 standard x86 edition; WDS Deployment Services Role; MDT 2012 Update 1; ADK 8, config manager tools for trace32.exe.
I have imported win7 boot and install images directly from the original DVD .iso files, both x86 and x64. Both capture and setup images work ok. I've added network drivers to these successfully. I can deploy vanilla win7 x86 and x64 using WDS - this works
fine.
So my issue is: I've deployed vanilla windows 7 to a desktop, installed applications, updated config as nessecary etc. Booted using the appropriate capture image and captured a .wim file. I've copied this to my WDS server and imported it as an install
image. When I try and deploy the image it fails just after the 'expanding windows files' stage. After looking in log files the error seems to be 'selected image file does not have a resource section'.
I've gone back to the WDS server, exported these image files and tried to mount them using DISM - I get the same error: "1812 The specified image file did not contain a resource section"
Mounting fails.
Now I've tried mounting the .wim files using dism BEFORE I import them into WDS and they mount without any issues. As soon as I import them and export them again they will not mount any more.
Please help, I don't know what else to try! :)
Some things I've thought but can't find answers to: Can you use 2008 standard to deploy Windows 7 at all? (server is earlier version of windows)
Is the apparent importing into WDS issue a red herring? Could it be that these images are broken from capture? Is there a way to test this without deploying the image using a USB stick instead of WDS?
I've tried uninstalling the ADK and installing WAIK instead. Exactly the same result. Here are some choice extracts from dism.log:
2015-03-02 17:33:18, Info                  CBS    Failed to find a matching version for servicing stack: C:\Users\softset\AppData\Local\Temp\MDTUpdate.2544\Mount\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.2.9200.16384_none_060a6d2998b13f25\
[HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2015-03-02 17:33:18, Info                  CBS    Failed to find servicing stack directory in online store. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2015-03-02 17:33:18, Info                  CBS    Failed to get proc address for CMP_GetServerSideDeviceInstallFlags [HRESULT = 0x8007007f - ERROR_PROC_NOT_FOUND]
2015-03-02 17:33:18, Info                  CBS    Failed to load CfgMgr32 DLL. [HRESULT = 0x8007007f - ERROR_PROC_NOT_FOUND]
2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 Failed to mount the image. - CWimImageInfo::Mount(hr:0x80070714)
2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:999 - CWimManager::InternalOpMount(hr:0x80070714)
2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2247 - CWimManager::InternalCmdMount(hr:0x80070714)
2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070714)
2015-03-03 15:29:27, Error                 DISM   DISM WIM Provider: PID=2852 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0x80070714)
2015-03-03 15:29:27, Error                 DISM   DISM.EXE: WimManager processed the command line but failed. HRESULT=80070714

Hello JPNhingy,
How to do you capture the .wim file?
About the question: Can you use 2008 standard to deploy Windows 7 at all? The answer is: Yes, you can use the Windows Server 2008 to deploy Windows 7.
You could create a capturer image in WDS, for more information, please take a look at the following article.
http://social.technet.microsoft.com/wiki/contents/articles/11680.creating-a-capture-image-in-wds.aspx
Additionally, you could use the sysprep to generalize the install image.
https://technet.microsoft.com/en-us/windows/preparing-an-image-using-sysprep-and-imagex.aspx
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SQL Server 2008 R2 Replication - not applying snapshot and not updating all repliacted columns

We are using transactional replicating on SQL Server 2008 R2 (SP1) using a remote distributor. We are replicating from BaanLN, which is an ERP application to up to 5 subscribers, all using push publications.
Tables can range from a couple million rows to 12 million rows and 100's of GBs in size.
And it's due to the size of the tables that it was designed with a one publisher to one table architecture.
Until recently it has been working very smooth (last four years)) but we have come across two issues I have never encountered.
While this has happen a half dozen times before, it last occurred a couple weeks ago when I was adding three new publications, again a one table per publication architecture.
We use standard SS repl proc calls to create the publications, which have been successful for years.
On this occasion replication created the three publications, assigned the subscribers and even generated the new snapshot for all three new publications.
However, while it appeared that replication had created all the publications correctly from end to end, it actually only applied one of the three snapshot and created the new table on both of the new subscribers (two on each of the
publications). It only applied the snapshot to one of the two subscribers for the second publications, and did not apply to any on the third.
I let it run for three hours to see if it was a back log issue.
Replication was showing commands coming across when looking at the sync verification at the publisher and
it would even successfully pass a tracer token through each of the three new publications, despite there not being tables on either subscriber on one of the publishers and missing on one of the subscribers on another.
I ended up attempting to reinitialize roughly a dozen times, spanning a day, and one of the two remaining publications was correctly reinitialized and the snapshot applied, but the second of the two (failed) again had the same mysterious result, and
again looked like it was successful based on all the monitoring.
So I kept reinitializing the last and after multiple attempts spanning a day, it too finally was built correctly.
Now the story only get a little stranger. We just found out yesterday that on Friday the 17th
at 7:45, the approximate time started the aforementioned deployment of the three new publications,
we also had three transaction from a stable and vetted publication send over all changes except for a single status column.
This publication has 12 million rows and is very active, with thousands of changes daily.
, The three rows did not replicate a status change from a 5 to a 6.
We verified that the status was in fact 6 on the publisher, and
5 on both subscribers, yet no messages or errors. All the other rows successfully updated.
We fixed it by updating the publication from 6 back to 5 then back to 6 again on those specific rows and it worked.
The CPU is low and overall latency is minimal on the distributor.
From all accounts the replication is stable and smooth, but very busy.
The issues above have only recently started. I am not sure where to look for a problem, and to that end, a solution.

I suspect the problem with the new publication/subscriptions not initializing may have been a result of timeouts but it is hard to say for sure. The fact that it eventually succeeded after multiple attempts leads me to believe this. If this happens
again, enable verbose agent logging for the Distribution Agent to see if you are getting query timeouts. Add the parameters
-OutputVerboseLevel 2 -Output C:\TEMP\DistributionAgent.log to the Distribution Agent Run Agent job step, rerun the agent, and collect the log.
If you are getting query timeouts, try increasing the Distribution Agent -QueryTimeOut parameter. The default is 1800 seconds. Try bumping this up to 3600 seconds.
Regarding the three transactions not replicating, inspect MSrepl_errors in the distribution database for the time these transactions occurred and see if any errors occurred.
Brandon Williams (blog |
linkedin)

Need clear steps for doing performance tuning on SQL Server 2008 R2 (DB Engine, Reporting Services and Integration Services)

We have to inverstigate about a reporting solution where things are getting slow (may be material, database design, network matters).
I have red a lot in MSDN and some books about performance tuning on SQL Server 2008 R2 (or other) but frankly, I feel a little lost in all that stuff
I'am looking for practical steps in order to do the tuning. Someone had like a recipe for that : a success story...
My (brain storm) Methodology should follow these steps:
Resource bottlenecks: CPU, memory, and I/O bottlenecks
tempdb bottlenecks
A slow-running user query : Missing indexes, statistics,...
Use performance counters : there are many, can one give us the list of the most important
how to do fine tuning about SQL Server configuration
SSRS, SSIS configuration ?
And do the recommandations.
Thanks
"there is no Royal Road to Mathematics, in other words, that I have only a very small head and must live with it..."
Edsger W. Dijkstra

Hello,
There is no clear defined step which can be categorized as step by step to performance tuning.Your first goal is to find out cause or drill down to factor causing slowness of SQL server it can be poorly written query ,missing indexes,outdated stats.RAM crunch
CPU crunch so on and so forth.
I generally refer to below doc for SQL server tuning
http://technet.microsoft.com/en-us/library/dd672789(v=sql.100).aspx
For SSIS tuning i refer below doc.
http://technet.microsoft.com/library/Cc966529#ECAA
http://msdn.microsoft.com/en-us/library/ms137622(v=sql.105).aspx
When I face issue i generally look at wait stats ,wait stats give you idea about on what resource query was waiting.
--By Jonathan KehayiasSELECT TOP 10
wait_type ,
max_wait_time_ms wait_time_ms ,
signal_wait_time_ms ,
wait_time_ms - signal_wait_time_ms AS resource_wait_time_ms ,
100.0 * wait_time_ms / SUM(wait_time_ms) OVER ( )
AS percent_total_waits ,
100.0 * signal_wait_time_ms / SUM(signal_wait_time_ms) OVER ( )
AS percent_total_signal_waits ,
100.0 * ( wait_time_ms - signal_wait_time_ms )
/ SUM(wait_time_ms) OVER ( ) AS percent_total_resource_waits
FROM sys.dm_os_wait_stats
WHERE wait_time_ms > 0 -- remove zero wait_time
AND wait_type NOT IN -- filter out additional irrelevant waits
( 'SLEEP_TASK', 'BROKER_TASK_STOP', 'BROKER_TO_FLUSH',
'SQLTRACE_BUFFER_FLUSH','CLR_AUTO_EVENT', 'CLR_MANUAL_EVENT',
'LAZYWRITER_SLEEP', 'SLEEP_SYSTEMTASK', 'SLEEP_BPOOL_FLUSH',
'BROKER_EVENTHANDLER', 'XE_DISPATCHER_WAIT', 'FT_IFTSHC_MUTEX',
'CHECKPOINT_QUEUE', 'FT_IFTS_SCHEDULER_IDLE_WAIT',
'BROKER_TRANSMITTER', 'FT_IFTSHC_MUTEX', 'KSOURCE_WAKEUP',
'LAZYWRITER_SLEEP', 'LOGMGR_QUEUE', 'ONDEMAND_TASK_QUEUE',
'REQUEST_FOR_DEADLOCK_SEARCH', 'XE_TIMER_EVENT', 'BAD_PAGE_PROCESS',
'DBMIRROR_EVENTS_QUEUE', 'BROKER_RECEIVE_WAITFOR',
'PREEMPTIVE_OS_GETPROCADDRESS', 'PREEMPTIVE_OS_AUTHENTICATIONOPS',
'WAITFOR', 'DISPATCHER_QUEUE_SEMAPHORE', 'XE_DISPATCHER_JOIN',
'RESOURCE_QUEUE' )
ORDER BY wait_time_ms DESC
use below link to analyze wait stats
http://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/
HTH
PS: for reporting services you can post in SSRS forum
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

MOSS 2007 SP1 & SQL Server 2008 upgrade plan into MOSS 2010 and SQL Server 2008 R2 ?

Hi All,
I've got the following setup in one single server:
Windows Server 2008 Standard
SQL Server 2008 Standard
SharePoint Server 2007 Enterprise SP1
that I'd like to upgrade into the following:
Windows Server 2008 R2 Standard
SQL Server 2008 R2 SP1 ?
SharePoint Server 2010 Enterprise
can i just perform CA farm level backup then import it on the new SharePoint server ? is there any caveat that i should pay attention to ? (eg. non working site list or web parts ? )
thanks.
/* Infrastructure Support Engineer */

Backup/import will not work for upgrade. As mentioned on the other thread, you need to perform a database attach upgrade to move to a separate 2010 from from a 2007 farm. For information about upgrading to SharePoint Server 2010, see the upgrade guide:
http://technet.microsoft.com/en-us/library/cc303420.aspx

Can I recover a damaged SQL Server 2008 database with the undamaged .mdb and .ldf files?

Their original SQL Server was 2008, with SP unknown, but installed on D: and C: drives. The power spike corrupted their O/S on the C:
drive and someone reinstalled both the O/S and the SQL Server, which is now SQL 2008, SP4. They have intact files for all system databases, both .mdb and .ldf. Is there some way they can reconnect with the user databases using the intact copies
of the previous system databases? I have heard that if the SQL Server is stopped, previous Master and Msdb .mdb and .ldf files moved into place and the server restarted, that any previous user database .mdb and .ldf files can be accessed by the SQL server.
Is this the case, or are there details missing?

Hello! try this steps
1 Open your SQL Server Management Studio console. This application shortcut is available in the SQL Server directory in the Windows Start button.
2 Enter the system administrator user name and password. SQL Server's administrator user name is "sa." This account is required for privileges to restore the database. If your restoring on a host provider server, use the administrator user name
and password they supplied for your account.
3 Right-click your database name and select "Attach." In the new window that opens, click the "Add" button to open a dialog box.
4 Select your MDF file and press the "Ok" button. It may take several minutes to restore the database if it is a large file. Once the process is finished, browse your tables to verify the data. The database is now restored.
If nothing helped try to use:
https://www.youtube.com/watch?v=1cbOYdvBW2c

Exchange Server 2010 Mailflow between Internet Facing-Site and No Internet Facing-Site

Hi all,
My environment there are two sites, Internet Facing-Site and No Internet Facing-Site.
The mail flow between them, it isn't working. The messages stuck in the queue.
Default Receive Connector No internet facing-site is configured, bellow:
Defaul....
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
Configuration the Internet Facing-Site, bellow:
From intenet
- Transport layer....
-Basic Authentication...
- Integrated windows....
And i configured a new receive connector on the Internet Facing-Site, follow bellow:
Sites
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
But, the messages yet stay stuck in the queue.
Queue error:
451 4.4.0 Primary target IP address responded with: “421 4.2.1 Unable to connect.” Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
I'm needing help, pls.

Please check SMTP traffic filtering/scanning enabled on the router/firewall. You can telnet even if the SMTP
traffic filtering/scanning enabled on the router/firewall. But emails will not pass through if the configuration is incorrect.
May be speed between sites causing this issue (not sure). Anyway please try changing the Tarpitinterval as a test.
To see the current setting "Get-ReceiveConnector | Select name,tarpitinterval "To set new value "Set-ReceiveConnector “<Connector-Name>”
–TarPitInterval:00:00:010"
Try restarting "MSexchange-Transport-sevice" on both servers as well
Can you send email one-way or
both ways not working?
MAS

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Windows Server 2008 driver for LaserJet 4100 with envelope printer

I have a new Windows 2008 Server 32 and a handful of HP printers. I need a driver for the LaserJet 4100 with an envelope feeder. The universal driver doesn't appear to recognize (or give an option to find) the envelope feeder. The old drivers I used on the previous server won't install on the 2008 box.
I can;t be the only person with an envelope feeder on this machine. Can anyone help or point me in the right direction?
Thanks
Jeff

I'm afraid I'll have to refer you to the Business Support Forums for further help. They're more well-versed with Laserjet printers.
Business Support Forums
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

2008 R2 PDC with DNS, File and Print Server Roles

Hi all,
we have a brand new Canon iRA7260 setup on 2008 R2 print server, which is also our DC, DNS, DHCP and File Server with latest PCL5c drivers downloaded from Canon's website as recommended at that time by the canon technician who assembled the
machine. All our laptops and desktops are running Windows 7 64-bit and after creating a GPO everyone got connected to the printer no problem, the printer has a static IP, same subnet as the print server and PDC, printer's port has been setup to RAW
and to spool documents, driver isolation setup to default.
All users are setup for secure print, so every print job they send to the printer stays on the printer until they walk up to the machine and release it by punching in a department's pin. Everything works great except for every morning a get a few complaints
that the jobs sent to the printer did not appear in the secure print folder. There is no errors of any kind on workstations and all I see in the print job logs on the print server is that document been spooled, printed and deleted. The strange thing is that
the size of the document that disappears is always shown as 0 bytes in size and 1 page long. And the whole process of spooling printing and deleting happens within 1 second according to logs. There is no errors or warnings in the log except for informational
events.
I just discovered that what actually fixes this issue for me is not even restarting the print spooler on the print server, but just login into the print server from my workstation via RDP with admin credentials. Once I login into the server remotely,
every print job sent to the printer afterwards from every workstation in our office appears as usual in users secure print mailboxes. Users don't even have to reboot their work stations, everything just starts working as usual. There is no overnight activities
on that server as all our staff leaves the offices by 8 p.m. the latest and the only thing that is running overnight is the Symantec's Backup Executive backup jobs. Is it possible that a back up job could somehow affect the print server/print driver settings
or put it into a "sleep" mode so it would require a domain admin login to the server to bring it back into operational state?

Hi, the print server had default permissions set after the role was installed. I just added domain users and authenticated users with print and view server rights. I don't think this is a problem though because Samsungs Brothers and Xerox printers
are working. It looks like some process that runs at night on the print server disallows users to print to the Canon printer when they come in in the morning. Login remotely with admin credentials into the 2008 R2 that has print server role installed and this
canon printer deployed via GPO fixes this immediately for all users. After the printer works fine until the last staff leaves the office. However when I come in in the morning everyone reports to me the same problem which again I'm able to fix by login with
my domain admin credentials. Could this be due to some special permissions that canon drivers require to be added that I'm not aware of? Or could this be caused by the overnight Backup Executive 2010 R3 backup job that kicks in at 9 p.m. every night?
Thanks

Change scopre / Multiscope option regarding Server 2008 R2 With TMG2010 PPTP Site-to-Site VPN.

Hey guys,
Ive been looking through the forum for some answers regarding the next setup;
Host with 2VM'S; DC and TMG
Internal range is 192.168.100.x/24
Host02 with 2 VM'S; DC02 and TMG02
Internal range is 192.168.200.x/24
Now im looking to expand DC02 as that is my DHCP. (TMG is the Gateway)
However, there is a site-to-site between both TMG server.
What is best practice in this situation and how should I go about this..?
Any thoughts upon this?
With kind regards, René de Meijer. MIEGroup.

Hi,
To serve the client in the subnet that doesn't have a DHCP server, we need to add a DHCP relay agent in this subnet.
To enable the DHCP relay agent, we need to install the RRAS. For the detailed steps, please refer to the link below:
Configure the IPv4 DHCP Relay Agent
https://technet.microsoft.com/en-us/library/dd469685.aspx
Besides, since we have installed the TMG server, a few more configuration is needed to allow the DHCP traffic.
Here is a related article, it may be helpful:
https://technet.microsoft.com/en-us/library/cc302680.aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows server 2008 can't access control panel and can't choose "properties" under "my computer"

Hello everyone!
Today after a schedule restart on the night I thought everything was normal with my server. But When i go to "start -> control panel" it show me "empty". And if I try to lunch "change/remove software" via search window in
"start" then nothing happen.
I know also that I can't right click on "computer" and choose "properties" in the start-menu.
Also another problem. I did install Fbackup to make schedule file backups on the night. The software worked well to launch when I had installed it, but after the night, this morning it just crash on launch.
I can also tell that I did add from 4 CPU core to 6 CPU cores.

Hi,
Have you tried to see if the issue persists when you boot into Safe Mode? Since you it shows blank when accessing Control Panel, please check if the policy setting below has been
configured.
Please choose Start – Run - type (gpedit.msc) - click on (Administrative Templates) - (control Panel) -
Prohibit access to Control Panel and Show only specified Control Panel applets. If they were configured, please disable them to see if it could resolve the issue.
In addition, the issue may also be caused by the virus, please run a system scan to see if there is any virus. At this time, you can also launch Control Panel apps from the command
line, and here's a list of .cpl files for your reference that you can print out:
Accessibility Options
access.cpl
Add/Remove Programs
appwiz.cpl
Add Hardware Wizard
hdwwiz.cpl
Automatic Updates
wuaucpl.cpl
Bluetooth Properties
bthprops.cpl
Display Properties
desk.cpl
Firewall Properties
firewall.cpl
Game Controllers
joy.cpl
Internet Options
inetcpl.cpl
iSCSI Initiator
iscsicpl.cpl
Java Control Panel
jpicpl32.cpl
Licensing Mode
liccpa.cpl
Mouse Properties
main.cpl
Network Connections
ncpa.cpl
Network Setup Wizard
netsetup.cpl
ODBC Properties
odbccp32.cpl
Power Options
powercfg.cpl
Regional and Language Options
intl.cpl
Sound and Audio Devices
mmsys.cpl
Stored Passwords
keymgr.cpl
System Properties
sysdm.cpl
Telephone and Modem Properties
telephon.cpl
Time and Date Settings
timedate.cpl
User Accounts
nusrmgr.cpl
Windows Security Center
wscui.cpl
Wireless Link
irprops.cpl
Hope this helps.
Regards,
Andy Qi
Andy Qi
TechNet Community Support

Project Server 2013 Tasks differ in project site and plan

I have an Project Server 2013 enterprise plan that I created with an associated project site. The plan has tasks added to the timeline. The project site has a timeline webpart but the problem is the tasks added to the timeline differ.
Does anyone have any ideas what could be the problem here? I checked the timeline webpart and it's correct.
Thanks!
[Images below].
The following image is taken from the schedule PDP.
This image taken from the project site depicts what is out of sync.

Hi Guillaume,
Yes, I've checked the queue while publishing the project. It's successful without any errors. I don't remember if I checked the ULS logs, but what I suspect is that it will say something along the lines of orphaned tasks in the project site.
Anyways I've tried a number of things and I think the only 2 options I have are:
Re-create the project site then sync the plan to it
Ask MSFT for a script to resolve the orphaned tasks
For the same of time, I'm going to assess how long it would take to re-create the project site.
Thanks,
Roland

KB2909210 on Server 2008 R2 breaks my intranet sites and print dialog box

Similar Messages

Maybe you are looking for