KB2919355 Fails to install on Server 2012 R2 with error 80071A2D
I have several Server 2012 R2 installs that I just cannot get KB2919355 installed on.
I have tried via WSUS and also manually and in all cases, the update takes a while says a reboot is a required then on the restart it rolls back as the update fails.
I have tried running sfc /scannow which reports no issues.
I have also tried running dism /online /cleanup-image /restorehealth which reports corruption was repaired, however in the Windows Setup log it says "System store corruption detection and repair has completed. Status : 0x0, Total instances of corruption
found : 0, total instances of corruption repaired : 0
I take this to mean these components are healthy.
I'd really appreciate a few suggestions here as I'm kind of at a brick wall now. I can't think of anything else to try.
Looking through the Application log, I have a number of Windows Error Reporting entries, most of which don't really say much but one does point to attached files including c:\windows\inf\setupapi.dev.log - the end of this log seemed to suggest that it was
a driver issue :
inf: {Configure Driver: exit(0x00000000)}
inf: {Configure Driver: Intel(R) 3100 Chipset PCI Express Port A - 35B6}
inf: Manufacturer = Intel
inf: Section Name = PCI_DRV
inf: Hardware Id = PCI\VEN_8086&DEV_35B6
inf: {Configure Driver: exit(0x00000000)}
inf: {Configure Driver: Intel(R) 3100 Chipset PCI Express Port A1 - 35B7}
inf: Manufacturer = Intel
inf: Section Name = PCI_DRV
inf: Hardware Id = PCI\VEN_8086&DEV_35B7
inf: {Configure Driver: exit(0x00000000)}
inf: {Configure Driver: Intel(R) 7300 Chipset PCI Express Port 1 - 3604}
inf: Manufacturer = Intel
inf: Section Name = PCI_DRV
inf: Hardware Id = PCI\VEN_8086&DEV_3604
inf: {Configure Driver: exit(0x00000000)}
inf: {Configure Driver: Intel(R) 7300 Chipset PCI Express Port 2 - 3605}
inf: Manufacturer = Intel
inf: Section Name = PCI_DRV
inf: Hardware Id = PCI\VEN_8086&DEV_3605
!!! inf: Failed to create driver descriptor key 'PCI\VEN_8086&DEV_3605'. Error = 0x00001A2D
inf: {Configure Driver: exit(0x00001a2d)}
!!! sto: Failed to reflect driver package. Error = 0x00001A2D
sto: {Reflect Driver Package: exit(0x00001a2d)}
!!! sto: Failed to reflect all driver updates. Error = 0x00001A2D
<<< Section end 2014/05/13 22:24:00.475
<<< [Exit status: FAILURE(0x00001a2d)]
But I'm not really sure how to progress troubleshooting this.
Cheers
James
Hi
Just to confirm, AVG only needed to be "disabled until reboot" to install the KB. It was obviously preventing some file operations that were required during the initial install phase.
Thanks very much to Susan for her help with this.
Similar Messages
-
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li -
Failed to install windows server 2012 in virtual machine hosted in window 8.1
I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie -
MDT 2013 Roles and features failing to install for server 2012 r2
I am having issues trying to apply Server 2012r2 Roles and features via MDT 2013.
Below I have attached the log.
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[The task sequencer log is located at C:\Users\ADMINI~1\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole"
context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Roles will be installed.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Roles specified in Role:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ FileAndStorage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[RoleServices specified in RoleService:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ File-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Storage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Features specified in Feature:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-Framework-Features]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-Framework-Core]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-WCF-TCP-PortSharing45]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ InkAndHandwritingServices]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Media-Foundation]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ RDC]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ SNMP-Service]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ SNMP-WMI-Provider]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Telnet-Client]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ User-Interfaces-Infra]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Gui-Mgmt-Infra]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Desktop-Experience]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Gui-Shell]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShellRoot]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShell]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShell-V2]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSRoles.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSRoleServices.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSFeatures.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ZTI Heartbeat: Processing roles (0% complete]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Property Parameters is now = -FeatureName FileAndStorage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Validating connection to \\WIN-7VSNJRF3PNO\DeploymentShare$\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context=""
type="1" thread="" file="ZTIOSRole">
<![LOG[Mapping server share: \\WIN-7VSNJRF3PNO\DeploymentShare$]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Already connected to server WIN-7VSNJRF3PNO as that is where this script is running from.]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread=""
file="ZTIOSRole">
<![LOG[Copying source files locally from \\WIN-7VSNJRF3PNO\DeploymentShare$\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64\sources\sxs]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole"
context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIOSRole: Path not found (76)]LOG]!><time="10:45:27.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="3" thread="" file="ZTIOSRole">I have narrowed this issue down to .net 3.5 install.
I have boot, efi, sources, support, autorun, bootmgr, bootmgr.edi, and setup.
I have confirmed that the sxs folder is there.
I also just added WindowsSource=%DeployRoot%\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64\sources\sxs to my customsettings and updated the boot iso. I am still receiving the errors.
One last bit of information I am able to get to the deployment share with the sxs folder in it from the reference machine I am creating but when I manually try to install .net 3.5 from roles and features to the share it fails. But if I copy the files local
they work fine.
I seem to have permission issues with other subfolders also.
Thanks,
Anthony -
Failure installing Sql Server 2012 x64
Hello,
I am trying to install Sql Server 2012 x64 with SP1, but I am running into the following error(s). It occurs almost immediately after I run "setup.exe":
<error>
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
There was a failure to initialize a setting from type Microsoft.SqlServer.Configuration.SetupExtension.InstallSharedDirSetting.
Error code 0x8564000E.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&EvtType=0x9F9575BA%25400x38AD03A5
BUTTONS:
OK
</error>
Any ideas what else I can do to get past this?Well... Don't know when I downloaded the original ISO image file. I re-downloaded, and now it extracted, and I ran it, which now I get the expected SQL Server Installation Center.
-
Unable to install SQL Server 2012 Developer
I have a problem with installing SQL Server 2012 (no matter which edition I choose). Installation usually runs well, but near the end shows up an error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
BUTTONS:
OK
The help link points to not-existing article on MSDN page. After I click OK button, the installation reaches it's end and shows up another, which tells, that Database Engine Services, Reporting Services - Native, Data Quality Services, Full-Text and Semantic
Extractions for Search and SQL Server Replication failed to install.
After that I am able to start, for example SQL Management Studio, but cannot connect to database. Also services of SQL Server (Server, Server Agent, Full-text Filter, Reporting Services) are stopped and I am not able to start them manually (any try throws an
error: "The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details").
I tried complete reinstalling of SQL Server, cleaning registry entries, different editions of that software - none method helped. Also, I tried the .iso images of installation media on other computers - it worked well and installed without any errors. My OS
is Windows 8.1 x64.Hello,
Please uninstall SQL server completely from add remove program.Make sure you uninstall it completely
Now right click on Setup.exe file which is there in SQL Server installable and select run as administrator to start installation.
On page where you are asked to provide startup account for SQL Server service select NT Authority\System or Local System account.
This issue is basically after installation SQL Server is not able to bring online database services using account which you selected .Local system account will allow it to come online
After installation change startup account to domain account with least privilege
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Unable to install SQL Server 2012 Standard: Error code 0x851A0019
Hi All,
I am trying to install sql server 2012 standard edition on windows server 2008R2 but at the end of the installation it is giving me the following error message:
"The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes."
And in the log file I got the following error message:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
(I have posted part of the log file)
Need your help to resolve this issue.
Thanks,
MKNayeemHi,
Thanks for your reply.
I have already followed that article. I have changed the user to local account user, but it did not work.
Like you said the sql server is installed, but it is not starting the services. Following is the error log file message:
2015-03-16 10:12:15.27 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-16 10:12:15.27 Server (c) Microsoft Corporation.
2015-03-16 10:12:15.27 Server All rights reserved.
2015-03-16 10:12:15.29 Server Server process ID is 5724.
2015-03-16 10:12:15.29 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-16 10:12:15.29 Server Authentication mode is MIXED.
2015-03-16 10:12:15.29 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG'.
2015-03-16 10:12:15.29 Server The service account is 'NT Service\MSSQL$BNG1SECISO'. This is an informational message; no user action is required.
2015-03-16 10:12:15.29 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\mastlog.ldf
2015-03-16 10:12:15.29 Server Command Line Startup Parameters:
-s "BNG1SECISO"
2015-03-16 10:12:15.57 Server SQL Server detected 2 sockets with 1 cores per socket and 1 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-16 10:12:15.57 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-16 10:12:15.57 Server Detected 16383 MB of RAM. This is an informational message; no user action is required.
2015-03-16 10:12:15.57 Server Using conventional memory in the memory manager.
2015-03-16 10:12:15.67 Server This instance of SQL Server last reported using a process ID of 2452 at 16-03-2015 07:03:13 (local) 16-03-2015 01:33:13 (UTC). This is an informational message only; no user action is required.
2015-03-16 10:12:15.67 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-16 10:12:15.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-16 10:12:15.69 Server Software Usage Metrics is disabled.
2015-03-16 10:12:15.70 spid6s Starting up database 'master'.
2015-03-16 10:12:15.78 Server CLR version v4.0.30319 loaded.
2015-03-16 10:12:15.82 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-16 10:12:17.36 spid6s Error: 824, Severity: 24, State: 2.
2015-03-16 10:12:17.36 spid6s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:377; actual 261:2228225). It occurred during a read of page (1:377) in database ID 1 at offset 0x000000002f2000 in
file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and
must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Thanks
MKNayeem -
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
I get one or the other error when i install SQL server 2012 SP1 in my Lab server
I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htmSorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected] -
Getting problem while installing Sql Server 2012
I am using Windows 8 in my system. I am trying to install Sql Server 2012 in my system .
But i am getting following error in the final.
The required MSI package 'D:\SQL Server 2012\x86\setup\sql_engine_core_shared_msi' doesn't exist.
Please, help me quickly.Hi,
You post same question 3 times. Please avoid this practice on Forum, I
have merged the same thread into this thread . Thanks for your understanding.
In addition, as other post, you can copy the missing .msi file from the complete and unbroken installation media to your MSI package path. Then run as administrator again. And also check if your account has read and write permission for your installation
media saving path. If the error still exists, you can check the SQL setup logs (Detail.txt and summary.txt) for analysis.
There is similar issue about installing SQL Server failed due to miss the required MSI package.
http://social.msdn.microsoft.com/Forums/en-US/2aa6136b-9ccd-4c97-a6d3-cbe408c38228/sql-server-2008-service-pack-1-installation-problem
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Errro while installing sql server 2012 express edition on Windows 8 -64 version
Hi,
Im trying to install sql server 2012 express edition on windows 8 machine(64 bit),however im getting same error every time.
The following error has occurred:
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337
i've googled and checked all prerequisite which is already installed.so not finding the reason behind this error.
it would be great if any one can help on resolving this error.
Thanks in advance
Regards
RiteshHi ,
Thanks for help. here is the log summary text
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068051679
Start time: 2014-02-05 12:30:44
End time: 2014-02-05 12:36:21
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: IDEA-PC
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER SQL Server Replication
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Basic 1033 Developer Edition
10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Complete 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Connectivity 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Backwards Compatibility 1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Client Tools SDK 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Integration Services 1033 Developer Edition
10.50.1600.1 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\b33170cf028067db5b8335d2\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLFASHION
INSTANCENAME: SQLFASHION
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQL$SQLFASHION
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: idea-pc\lenovo
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\SystemConfigurationCheck_Report.htm -
Can't Install SQL Server 2012 in Windows 8.1 Pro
I have Visual Studio 2010 Ultimate installed on my unit.
I tried installing SQL Server 2012 and it failed because I don't have the SP1 for VS2010.
I installed SP1 successfully, but now I can't install the SQL Server 2012.
Error says: Managed SQL Server 2012 has stopped
I have scanned many forums but cannot find the answer.
I have .Net frameworks 3.5 and 4.0 installed in my laptop, still, no progress.
Please help me with this. Thanks a lot.Check below thread seems to be similar issue
You need to enable .NET Framework 3.5 using Control Panel
Control Panel -> Programs and Features -> Turn on or off features.
Install or enable PowerShell 2.0 also.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/1fe44750-0d6b-46ff-929a-15e616e33546/problem-installing-sql-server-2012-sp1-managed-sql-server-installer-has-stopped-working
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
<p>Hi,</p><p>I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.</p><p>The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.</p><p>The detail.txt log file shows as follows:</p><p>(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID<br />(01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True<br />(01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True<br />(01) 2014-07-17 15:36:35 Slp: ----------------------------------------------------------------------<br
/>(01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction<br />(01) 2014-07-17 15:36:36 Slp: Running discovery on local machine<br />(01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete<br />(01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01</p><p>After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails</p><p></p>Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Preinstaller failing at install Application Server Role, Web Server (IIS) Role
Hi,
I am trying to install SharePoint 2013 on Windows 2008 R2. I have database MS SQL Server 2012 on the same machine itself. My SharePoint Preinstaller fails at installing Application server and Web server roles.. Even though the roles get created, they
don't complete because ASP.Net activation fails. Here is my log:
2013-04-08 16:12:08 - Processor architecture is (9)
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 - Common Startup
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2013-04-08 16:12:08 - The value is...
2013-04-08 16:12:08 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2013-04-08 16:12:08 - Trying to remove the startup task if there is any.
2013-04-08 16:12:08 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2013-04-08 16:12:08 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2013-04-08 16:12:08 - Locating the following command line arguments file:
2013-04-08 16:12:08 - E:\PrerequisiteInstaller.Arguments.txt
2013-04-08 16:12:08 - Error: This file does not exist
2013-04-08 16:12:08 - Details of the current operating system:
2013-04-08 16:12:08 - Major version number of the operating system: (6)
2013-04-08 16:12:08 - Minor version number of the operating system: (1)
2013-04-08 16:12:08 - Build number of the operating system: (0X1DB1=7601)
2013-04-08 16:12:08 - Major version number of the latest Service Pack: (1)
2013-04-08 16:12:08 - Minor version number of the latest Service Pack: (0)
2013-04-08 16:12:08 - Platform ID of the operating system: (2)
2013-04-08 16:12:08 - Product suites available on the operating system: (0X112=274)
2013-04-08 16:12:08 - Product type of the operating system: VER_NT_SERVER
2013-04-08 16:12:08 - Product type: (10)
2013-04-08 16:12:08 - OS type: (0)
2013-04-08 16:12:08 - Configuring the application's property sheet...
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Windows Management Framework 3.0
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 - PowerShellVersion
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2013-04-08 16:12:08 - The value is...
2013-04-08 16:12:08 - 3.0
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 - CTPVersion
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2013-04-08 16:12:08 - Could not find or unable to read CTPVersion key
2013-04-08 16:12:08 - The prerequisite above is already installed
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Microsoft .NET Framework 4.5
2013-04-08 16:12:08 - Reading the following DWORD value/name...
2013-04-08 16:12:08 - Install
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Windows Identity Foundation (KB974405)
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 -
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2013-04-08 16:12:08 - The value is...
2013-04-08 16:12:08 - 6.1.7600.0
2013-04-08 16:12:08 - The prerequisite above is already installed
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2013-04-08 16:12:08 - Reading version of the following file...
2013-04-08 16:12:08 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2013-04-08 16:12:08 - The version is...
2013-04-08 16:12:08 - 1.0.3010.0
2013-04-08 16:12:08 - The prerequisite above is already installed
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Microsoft SQL Server 2008 R2 SP1 Native Client
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 - Version
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2013-04-08 16:12:08 - The value is...
2013-04-08 16:12:08 - 10.51.2500.0
2013-04-08 16:12:08 - A higher version of the prerequisite above is already installed
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Windows Server AppFabric
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 - ProductVersion
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\AppFabric\V1.0
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Windows Identity Foundation (KB974405)
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 -
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Microsoft Information Protection and Control Client
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 -
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2013-04-08 16:12:08 - The value is...
2013-04-08 16:12:08 - 1.0.621.117
2013-04-08 16:12:08 - A higher version of the prerequisite above is already installed
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Microsoft WCF Data Services 5.0
2013-04-08 16:12:08 - Reading the following string value/name...
2013-04-08 16:12:08 - Version
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2013-04-08 16:12:08 - Check whether the following prerequisite is installed:
2013-04-08 16:12:08 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2013-04-08 16:12:08 - Reading the following DWORD value/name...
2013-04-08 16:12:08 - IsInstalled
2013-04-08 16:12:08 - from the following registry location...
2013-04-08 16:12:08 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2013-04-08 16:12:08 - The value is (1)
2013-04-08 16:12:08 - The prerequisite above is already installed
2013-04-08 16:12:14 - Beginning download/installation
2013-04-08 16:12:14 - Created thread for installer
2013-04-08 16:12:14 - Beginning download of Microsoft .NET Framework 4.5
2013-04-08 16:12:14 - http://go.microsoft.com/fwlink/?LinkID=250950
2013-04-08 16:12:15 - Size of download of "Microsoft .NET Framework 4.5" in bytes is "1005568"
2013-04-08 16:12:15 - Download of "Microsoft .NET Framework 4.5" completed successfully
2013-04-08 16:12:15 - Installing Microsoft .NET Framework 4.5
2013-04-08 16:12:15 - "C:\Users\SPAdmin\AppData\Local\Temp\NETB7E9.tmp.exe" /q /norestart
2013-04-08 16:15:27 - Install process returned (0)
2013-04-08 16:15:27 - [In HRESULT format] (0)
2013-04-08 16:15:27 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\SPAdmin\AppData\Local\Temp\PreAAB0.tmp.XML"
2013-04-08 16:15:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:58 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:15:59 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:00 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:01 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:02 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:03 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:04 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:05 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:06 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:07 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:08 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:09 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:10 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:11 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:12 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:14 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:15 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:16 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:17 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:18 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:19 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:20 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:21 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:22 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:23 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:24 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:25 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:26 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:50 - Install process returned (0)
2013-04-08 16:16:50 - [In HRESULT format] (0)
2013-04-08 16:16:50 - "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe" -i
2013-04-08 16:16:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2013-04-08 16:16:57 - Install process returned (0)
2013-04-08 16:16:57 - [In HRESULT format] (0)
2013-04-08 16:16:57 - "C:\Windows\system32\cscript.exe" "C:\Windows\system32\iisext.vbs" /enext "ASP.NET v4.0.30319"
2013-04-08 16:16:58 - Install process returned (-2146646015)
2013-04-08 16:16:58 - [In HRESULT format] (-2146646015)
2013-04-08 16:16:58 - Error when enabling ASP.NET v4.0.30319
2013-04-08 16:16:58 - Last return code (-2146646015)
2013-04-08 16:16:58 - Reading the following DWORD value/name...
2013-04-08 16:16:58 - Flags
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 - PendingFileRenameOperations
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SYSTEM\CurrentControlSet\Control\Session Manager
2013-04-08 16:16:58 - Reading the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2013-04-08 16:16:58 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2013-04-08 16:16:58 - Last return code (-2146646015)
2013-04-08 16:16:58 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2013-04-08 16:16:58 - Cannot retry
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Windows Management Framework 3.0
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 - PowerShellVersion
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2013-04-08 16:16:58 - The value is...
2013-04-08 16:16:58 - 3.0
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 - CTPVersion
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2013-04-08 16:16:58 - Could not find or unable to read CTPVersion key
2013-04-08 16:16:58 - The prerequisite above is already installed
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Microsoft .NET Framework 4.5
2013-04-08 16:16:58 - Reading the following DWORD value/name...
2013-04-08 16:16:58 - Install
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2013-04-08 16:16:58 - The value is (1)
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 - Version
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2013-04-08 16:16:58 - The value is...
2013-04-08 16:16:58 - 4.5.50709
2013-04-08 16:16:58 - The release version of .NET 4.5 is installed.
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Windows Identity Foundation (KB974405)
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 -
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2013-04-08 16:16:58 - The value is...
2013-04-08 16:16:58 - 6.1.7600.0
2013-04-08 16:16:58 - The prerequisite above is already installed
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2013-04-08 16:16:58 - Reading version of the following file...
2013-04-08 16:16:58 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2013-04-08 16:16:58 - The version is...
2013-04-08 16:16:58 - 1.0.3010.0
2013-04-08 16:16:58 - The prerequisite above is already installed
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Microsoft SQL Server 2008 R2 SP1 Native Client
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 - Version
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2013-04-08 16:16:58 - The value is...
2013-04-08 16:16:58 - 10.51.2500.0
2013-04-08 16:16:58 - A higher version of the prerequisite above is already installed
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Windows Server AppFabric
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 - ProductVersion
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\AppFabric\V1.0
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Windows Identity Foundation (KB974405)
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 -
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Microsoft Information Protection and Control Client
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 -
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2013-04-08 16:16:58 - The value is...
2013-04-08 16:16:58 - 1.0.621.117
2013-04-08 16:16:58 - A higher version of the prerequisite above is already installed
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Microsoft WCF Data Services 5.0
2013-04-08 16:16:58 - Reading the following string value/name...
2013-04-08 16:16:58 - Version
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2013-04-08 16:16:58 - Check whether the following prerequisite is installed:
2013-04-08 16:16:58 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2013-04-08 16:16:58 - Reading the following DWORD value/name...
2013-04-08 16:16:58 - IsInstalled
2013-04-08 16:16:58 - from the following registry location...
2013-04-08 16:16:58 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2013-04-08 16:16:58 - The value is (1)
2013-04-08 16:16:58 - The prerequisite above is already installed
2013-04-08 16:17:07 - Opening log file
2013-04-08 16:17:07 - Opened action for user
2013-04-08 16:17:07 - C:\Users\SPAdmin\AppData\Local\Temp\prerequisiteinstaller.2013.04.08-16.12.08.log
2013-04-08 16:17:56 - Return code (-2146646015)
2013-04-08 16:17:56 - It is recommended that you keep your Windows operating system up to date on http://windowsupdate.microsoft.com
I tried solutions for all previous posts that I could find. Can anybody help me out?
Thanks
AbdelPlease help!!! I am going on 9 days now trying to install SharePoint 2013 onto a VM. I have tried Hyper-V and VMWare and am getting the same result with both.
Running Windows 8.1 with 16 GBs of RAM.
The pre-req installer will not install anything!! And I get this error:
The tool was unable to install Application
Server Role, Web Server (IIS) Role
So I installed the Web Server IIS Role and restart... still no luck
Then I ran this command:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -i -enable
And get this message: "This option is not supported on this version of the operating system. Admins should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off dialog....
9 days of cussing and pulling my hair out... please someone help.. I just want to run the Pre-Req installer and install SharePoint on a VM Machine.
Any help would be appreciated!! Thanks in advance!
I just want to confirm that I'm facing exactly the same problem.
Currently, Microsoft SharePoint Server 2013 is not supported for installation on computers running the Windows Server 2012 R2 operating
system.
http://support.microsoft.com/kb/2891274/ -
Installing Windows Server 2012 on W510
I realize this is not likely to be a common scenario, nor a supported one. I'm installing Windows Server 2012 (Evaluation edition) on a w510 to use as a learning lab. In case anyone else decides to head down this road I've documented what I've run into so far.
System: Thinkpad W510 43192NU
Upgrades: 16GB RAM, Crucial M4 256GB SSD.
The basic install happened quickly and easily, but as expected there are a couple of driver issues.
Installed Windows Server 2012 Standard 180-day EVAL from DVD (ISO obtained from Technet 10/15/2012)
Installed available Windows Updates (only 2 as of October 25, 2012)
Installed Lenovo nVidia discrete video driver for W510 Windows 8 64bit
(getting braver here)
Installed Thinkvantage System Update 5.0 for Windows 8 64bit
Ran System Update and it found 3 available items:
Intel Management Engine Interface 6.2 and Serial Over LAN (SOL) driver downloaded and installed
Audio Driver for Windows 8 32/864 <--SIC Downloaded and installed
ThinkVantage Active Protection System (64bit) <-- did not download / unsuccessful
At this point there are also 3 items still listed under "Other Items" in device manager:
Looked up device IDs in Properties, ran through driveridentifier.com:
Base System Device (I think its the Ricoh Mulit-Card Reader)
Device Name:
Base System Device
Hardware ID
PCI\VEN_1180&DEV_E230&SUBSYS_213417AA&REV_01
PCI\VEN_1180&DEV_E230&SUBSYS_213417AA
PCI\VEN_1180&DEV_E230&CC_088000
PCI\VEN_1180&DEV_E230&CC_0880
Compatible ID:
PCI\VEN_1180&DEV_E230&REV_01
PCI\VEN_1180&DEV_E230 <---- Device ID matches with our database
PCI\VEN_1180&CC_088000
PCI\VEN_1180&CC_0880
PCI\VEN_1180
PCI\CC_088000
PCI\CC_0880
Current Status: Detected and installed using the Windows 7 driver from Lenovo
Broadcom Bluetooth Device
Device Name:
ThinkPad Bluetooth 2.1 with Enhanced Data Rate II
Hardware ID
USB\VID_0A5C&PID_217F&REV_0360
USB\VID_0A5C&PID_217F <---- Device ID matches with our database
Compatible ID:
USB\MS_COMP_BLUTUTH&MS_SUBCOMP_1112EDR
USB\MS_COMP_BLUTUTH
USB\CLASS_E0&SUBCLASS_01&PROT_01
USB\CLASS_E0&SUBCLASS_01
USB\CLASS_E0
Current Status: Unresolved. Windows 7 driver failed, OS complained about compatibility issues.
Unknown Device <-- That is how its listed under device manager
Device Name:
ThinkPad PM Device
Hardware ID
ACPI\VEN_IBM&DEV_0068
ACPI\IBM0068
*IBM0068 <---- Device ID matches with our database
Compatible ID:
Version
1.43.0.0,2007-05-31
Current Status: Unresolved. Installed Windows 8 Lenovo Power Management driver without errors but did not fix. Item still listed under "Other device"
At this point I have it where I need it to be. All I want to do is have a stable basic install so I can install Hyper-V and play around with a bunch of VMs. For that I don't really need Bluetooth or enhance power management.Camarones wrote:
Have you found a solution to the driver issues I mentioned?
I had no issue installing the Windows 7 x64 power management driver and Power Manager. Just keep in mind it is only for control of the CPU clock speed and a few other settings. With Hyper-V installed, you lose sleep/hibernate and resume.
Bluetooth won't work
I never had a use for multcard.
With Windows Server 2012 be happy you have networking and a video driver which are the core things you need. If you want a full on workstation, move to Windows 8 Pro and Hyper-V.
Maybe you are looking for
-
Decimal after two digit in RTF
HI, i want to print decimal after two digit i.e., 44 must be changed to 44.00 in .rtf I am able to print decimal after three and four digit i.e., 524 --> 524.00 , 6456 -->6456.00 I am using 0.00 format from BI PUBLISHER PROPERTY but not able to get d
-
MuVo TX SE 1GB formatting prob
I've been reading a lot of questions and answers, but I still couldn't find my question, so I post it here... I have a problem with my MP3 Player. I have a <I>MuVo TX SE</I> from <I>Creative</I>. (GB) I can not format my MP3 Player anymore. I can sta
-
Incoming Invoice approval mail
Hi, We have a scenario in which when a supplier creates an invoice then a mail is send to invoice approval. I want to know how this mail is triggered. Any settings for it? Any settings to configure the recipient list for the mail? Thanks & Regards, M
-
my contacts all of a sudden disappeared off my iPhone 4S with IOS7. Anyone know what is up?
-
Dears, How to change moving average price in Material Master - as in MM02 it is grey out. Thanks.