Kb2920730 shows up in software center but server has no Sharepoint

on one server the update kb2920730 shows up in software center as failed, but this specific server has nothing installed related to SharePoint server
how can we get rid of this update?
the customer forced the machine to scan online and then it did not show that update in the list

you should look at the logs why did the installation failed. check windowsupdate.log .did you try manual install and capture the error msg ?
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Similar Messages

OSD Tasks only available to PXE and media showed up in Software Center on a server!

OK so I'm getting a selected windows 2008 r2 server setup with its SCCM client cert, I get the client installed on there - everything's looking great, I see updates and CI's and policies all coming down nicely watching the client logs... I open up software
center thinking I'll go on ahead and kick off the 2 available windows updates and to my horror I see my OSD Task Sequence deployments (Available) sitting there in software center. These are all set for visibility only to PXE and media - NEVER software center
- every single one of them - and I've triple-checked every one since I saw this and also verified they don't show up on a client workstation. I deleted the deployments for these task sequences and grabbed the \windows\ccm\logs directory in full off the server
for review... How in the flying heck did these task sequences show up in Software Center on my server's newly installed client / software center???

Aha! Thanks Mr Sandys! Sure enough the client hasn't upgraded yet and is at 5.00.7711.0000.
I have automatic sitewide client upgrade configured (within 1 day) - guess I'll wait to see if it updates or not. Shouldn't pushing the client from my CM server send the latest client X_X ?

Clients not showing apps in software center after update to CU4

I recently upgraded my SCCM2012 SP1 to CU4 in an effort to support our Macs some of which are running Mavericks. However, I have been noticing that many times when I do an OSD of a Windows computer one of a couple things will happen. If it is a computer
that is being re-imaged, it will only get a single app installed and no other apps will show up in Software Center. I also just today got a new computer and most of our apps are in SC but several are missing. They show up in the console as being deployed to
the machine in it's properties under Devices, but they just aren't getting to the computer. On the re-image computer many times I could just remove it entirely from SCCM then re-add it and it would work fine but with the new computer I'm at a loss as to what
to do. Has anyone else seen this behavior?

Is the device stuck in provisioning mode? That would block it from getting client policy (among other things).
To check, see ProvisioningMode = True under the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCM\CcmExec registry key.
This usually happens if an unsupported update gets installed while in the task sequence:
http://support.microsoft.com/kb/2894518/en-us
You can fix a broken client with this PowerShell command:
Invoke-WmiMethod -Namespace root\CCM -Class SMS_Client -Name SetClientProvisioningMode -ArgumentList $false
To keep them from breaking, use offline servicing to inject the updates into all of your images so they don't get installed during the task sequence.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Applications Installed through task sequence not showing up in Software Center

In the task sequence we use for our OSD Windows 7 machine build, we have Custom-Install Application steps which install a number of of our Applications. Each of these Applications has the "Allow this application to be installed from the Install
Application task sequence action without being deployed" checkbox checked. All of the Applications have the following properties set:
Installation behavior: Install for system
Logon requirement: Whether or not a user is logged in
Installation program visibility: Hidden
When a machine is built using this task sequence, all of the Applications install successfully - they show up in Control Panel\Programs and Features, and they run correctly. However, none of them show up in the Software Center. I'm not seeing anything in
any of the logs that indicates a problem, and the Software Center remains empty even after running all the client evaluation cycle actions
Interestingly, if I add a couple of the newly build machines to a collection, then target deployments for the already installed Applications to that collection, after running the Machine Policy Retrieval and Evaluation Cycle the Applications immediately
show up in Software Center as installed.
Does anyone know if Applications installed through a task sequence do not show up in the Software Center by default, or could you give me some troubleshooting tips if this is not normal?
Thanks for any suggestions!
SCCM 2012 SP1, Single site, W7 clients

Why you deploy applications through task sequences? Task sequences are built and meant to be used with OSD, not application deployment.
To my knowledge, if you have application install step in a task sequence and you deploy that task sequence to a collection of machines, the software center on those machines only sees the task sequence itself, not the applications inside the task sequence.
If you want your applications to be shown in the software center, change the method of deploying stuff and deploy applications as they're are meant to.

Show Options in Software Center

Hi,
in the Software Center the default setting is Show "All". Is there a possibility to change this default to "Applications" or something else?
Thanks Experts

No.
Torsten Meringer | http://www.mssccmfaq.de

IE11 SCCM 2012 Deployment - says installed in software center but after re-boot IE8 Remains

Hello,
I have an issue deploying IE11 to the estate, on the pc's the package says installed in software centre but when the users re-boot it's still IE8 on the machine.
The monitoring tool in SCCM 2012 console lists the install as successful.
I have the appenforce log from one of the machiens with the issue:
Starting Install enforcement for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision - 1, ContentPath
- C:\Windows\ccmcache\19, Execution Context - System AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    A user is logged on to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:30:53 6512 (0x1970)
+++ MSI application not discovered [MSI Product Code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    App enforcement environment:
Context: Machine
Command line: msiexec /i "IE11-Setup-Full.msi" /q
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\Windows\ccmcache\19
Working directory: AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Prepared working directory: C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Prepared command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Valid MSI Package path = C:\Windows\ccmcache\19\IE11-Setup-Full.msi AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Advertising MSI package [C:\Windows\ccmcache\19\IE11-Setup-Full.msi] to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
    Executing Command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn with system context AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Working directory C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Post install behavior is BasedOnExitCode AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Waiting for process 7204 to finish. Timeout = 120 minutes. AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
    Process 7204 terminated with exitcode: 0 AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Looking for exit code 0 in exit codes table... AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Matched exit code 0 to a Success entry in exit codes table. AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
    Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:31:05 6512 (0x1970)
+++ Discovered MSI application [AppDT Id: ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision: 1, MSI Product code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce
28/01/2015 12:31:05 6512 (0x1970)
++++++ App enforcement completed (11 seconds) for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" [ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3], Revision:
1, User SID: ] ++++++ AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
This is the CAS log:
Saved Content ID Mapping e9dea25d-d24d-4d5c-a767-52068338e976.1, C:\Windows\ccmcache\12 ContentAccess 28/01/2015 10:12:41 6884 (0x1AE4)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
Releasing content request {1738FD09-9D1F-4708-9266-A418E9EB049A} ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
All references to Content 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:12:57
9832 (0x2668)
Saved Content ID Mapping 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1, C:\Windows\ccmcache\13 ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
Releasing content request {25035F86-891D-41D3-AD45-F845D8689F88} ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
All references to Content cedf67fc-735e-4360-8db4-c8cb5d39663c.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:13:10
8140 (0x1FCC)
Saved Content ID Mapping cedf67fc-735e-4360-8db4-c8cb5d39663c.1, C:\Windows\ccmcache\14 ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
Releasing content request {BB6AA813-A4F7-4095-B60D-4441E3D7833D} ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
All references to Content 108336d1-2d2c-4d93-87b3-49d335640f2a.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:14:12
14352 (0x3810)
Saved Content ID Mapping 108336d1-2d2c-4d93-87b3-49d335640f2a.1, C:\Windows\ccmcache\15 ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
Releasing content request {2CA9AC92-0716-49A7-86D4-434B88B4D07B} ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
All references to Content 3fb07321-f1d1-4b71-90f1-233b355b13dd.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:14:30
13956 (0x3684)
Saved Content ID Mapping 3fb07321-f1d1-4b71-90f1-233b355b13dd.1, C:\Windows\ccmcache\16 ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
Releasing content request {47EB54C8-54C9-4FF8-A302-53AF844FA275} ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
All references to Content 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:15:53
10588 (0x295C)
Saved Content ID Mapping 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1, C:\Windows\ccmcache\17 ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Releasing content request {F230295F-5136-49C7-B1FF-68697DA4C421} ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
All references to Content 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015 10:16:11
12040 (0x2F08)
Saved Content ID Mapping 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1, C:\Windows\ccmcache\18 ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Requesting content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, size(KB) 98073, under context System with priority Medium ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
User policy requested with no user credentials. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Invalid user. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Submitted CTM job {7174344D-6757-429C-BA3D-A6FBE9A34DA7} to download Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Successfully created download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Location update from CTM for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 and request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 0 - http://USS-LON-SCCMDP1.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 1 - http://USS-LON-SCCMMAN.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download request only, ignoring location update ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download started for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12268 (0x2FEC)
Download completed for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:52 5228 (0x146C)
Computed hash: F6BEAA17C60572A0751C74DACE26075CC2621CF72F23B09EFEEA4C928A3B0E54 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Hash verification succeeded for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 downloaded under context System ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Download succeeded for download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\19.BCWork with Error 0x00000002. ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 12104 (0x2F48)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 12:31:05 10856 (0x2A68)
Releasing content request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)
All references to Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 in cache have been removed.                   Content will be Tombstoned. ContentAccess 28/01/2015
12:31:05 12104 (0x2F48)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)

If the command-line you gave ConfigMgr runs successfully, there's not anything else ConfigMgr can do. Thus the logs above don't add any value. Thus, the issue lies with the MSI. Where did you get it from? Have you tried running it with the /l*v command-line
option to add verbose logging and then reviewed this log file? Have you tried manually testing using the System account (done using psexec) to more closely emulate how ConfigMgr invokes the command-line?
Jason | http://blog.configmgrftw.com | @jasonsandys

I purchased a book through iTunes and it downloaded. I synced with my iPad. It shows the book is downloading but that has been going on for two hours and i still can't open the book.

I purchased a book through iTunes. I then synced my iPad and went to iBooks. I clicked on the book and it shows downloading but that has been going on for almost two hours and i still can't open the book. What gives? I have done this before no problem.

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
Or you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Update deployment shows downloading 0% in Software center.

Hi All,
I am trying to patch a windows server 2012 R2 server using SCCM 2012 R2. The update is deployed to the collection & received in the machine but the file download always shows 0% in software center.
Please help.
Thanks,
Pranay.

Thanks Jacob,
found the solution at your one of other post :-
http://social.technet.microsoft.com/Forums/en-US/7c7f8538-c2e2-4ecc-ad05-dca13d00559e/error-sending-dav-request-http-code-500-status-internal-server-error?forum=configmanagergeneral
http://venusingireddy.blogspot.in/2013/07/error-sending-dav-request-http-code-500.html
I was having the same problem.
Thanks,
Pranay.

Successful installed application keeps showing on Installation Status tab as Installed in Software Center

Hello everyone,
As the title says; after I have deployed an application. It keep showing itself on Installation Status tab in software center as Installed.
Thank you all in advance.

Hi,
That means that it is installed, what is your issue with it? don't you wan't it to show up? then you can select that it should not show up in Software Center under User Experience on the deployment of the application.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Incorrect Software Center content

Hello everybody,
I'm having hardtime with our SCCM 2012 SP1 infrastrucutre for 2 weeks now.
Basically, everything has been running smoothly for quite some times (last major update was SP1 in June 2013) but computers being staged with MDT integrated TS or machines with a basic Dell image joined to domain on which the client is deployed have an issue
to show proper content in the Software Center.
For the Background, I have a pretty simple setup : Single site server and multiple DP's (one per site) and the only recent changes I have operated were in Septembre when I've started PKI certificates installation whilst the Servers roles are still in http
or https at the moment. I thought this could be the trigger for my problems and rolled everything back but no success.
Packages and Applications available during the OSD are deployed over a specific collection containing unknown computers. Therefore, once the staging is completed the computer leaves that collection and those packages and applications are not shown as available
anymore while the computer will retreive the deployments offered to another collection it joins automatically.
That's what happens in theory but all my newly deployed clients will not refresh the Software Center content. For those which were deployed through the OSD, they will keep on showing the OSD Collection content. If I try to deploy one on these I will receive
an error reading that this application is not available anymore and that I need to refresh the Software Center window by pressing F5. It doesn't help, niether is triggering an Machine Policy retrieval from the CM Client control panel.
I have noticed that If I deleted an existing deployment from the collection and redeploy it the way it was done before, the computer will update properly.
For the rest, communication with the MP seems to be doing fine, I've found these 2 relevant informations in the client logs :
CIDownloader.log
CCIDownloader::ParseDtsMessage - Dts failed with error code: 0x80070002. CI Downloader will retry.
CIDownloaderJob({A075A9A7-3718-4406-8500-B22050F415BE}): Received Dts failure message during CI download.
DataTransferService.log
DTS job {0E0E6903-DDD0-4FCC-A23E-DA0E55664DCF} BITS job {0F26EA27-2AE4-4594-99F4-75EB739E1DED} failed to download source file http://MPSERVER:80/SMS_MP/.sms_dcm?Id&DocumentId=ScopeId_AB937F68-B10F-4E92-A014-A48670401DB2/DeploymentType_cad04669-1180-4d9f-a001-96f157404929/3/PROPERTIES&Hash=4E2F586ABACEC8569C9F578220ECA0742E18197DA9367C5DD0ACEFEBE22E4173&Compression=zlib
to destination C:\WINDOWS\CCM\CIDownloader\Staging\{EF9BA50D-C421-47FF-9835-3D6CB2B9A47C}_2.zip with error 0x80190194
DTS job {0E0E6903-DDD0-4FCC-A23E-DA0E55664DCF} has completed:
                Status : ERROR (0x80070002),
                Start time : 11/06/2013 15:10:43,
                Completion time : 11/06/2013 15:10:54,
                Elapsed time : 11 seconds
Has anyone ever encountered that issue? I'm thinking about uninstalling/reinstalling the MP role on my main server but I must admit I'm pretty cold about this modification as I do not find relevant log errors about this issue and I'm affraid of simply loosing
control on all my corking clients.
thanks for you time and, if I need to provide additional information let me know. I tried to stick to what seems of interest as I've been digging this for some time now.
Thomas

Hi Torsten,
I have indeed check the Monitoring node from the console and have no warnings/errors.
I have checked on site servers logs, especilly the MP ones, and found errors about ClientAuth_SignatureFailure (which seems to be linked to my half PKI setup) but these do not apply to the computers I'm running my tests on and I ruled them out. I can post
the content here if you want anyway.
About Policypv.log, I've found the following "Failed to create 1 settings policy" errors coming on a regular basis:
CPolicySource::HandleSiteControlPolicy: Branding SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
no change SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
CPolicySource::HandleSiteControlPolicy: DeviceWP8AppMgmtSiteConfig SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
CDeviceEnrollmentGenericSCConfig::GenerateDevicePolicyXML: failed to retrieve DTGuid from AppModelname 0 SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
CPolicySource::HandleSiteControlPolicy: DeviceHardwareInventorySiteConfig SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
no change SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
CPolicySource::HandleSiteControlPolicy: DeviceSoftwareInventorySiteConfig SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
CPolicySource::HandleSiteControlPolicy: BigGreenButtonConfig SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
no change SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
Did not find any settings policy and policy assignments that should be created. SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
Did not find any settings policy and policy assignments that should be updated. SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
Failed to create 1 settings policy. SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
not yet time to do quarantine purge SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
Notifying about changes in policy content/targeting SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
Policy or Policy Target Change Event triggered. SMS_POLICY_PROVIDER 14/11/2013 11:13:58 9060 (0x2364)
Processing TS application reference policy changes that need to be updated SMS_POLICY_PROVIDER 14/11/2013 11:13:58 6904 (0x1AF8)
Edit : Additional errors from the CIDownloader.log:
DeleteInstanceFromLantern failed (0x80041002).
GetInstanceFromLantern failed (0x80041002).
DCM::LanternUtils::CheckCIExists - Wmi Instance: PolicyPlatform_Policy.Name="ScopeId_AB937F68_B10F_4E92_A014_A48670401DB2_DeploymentType_4bc1b8bb_94fc_4d55_bd05_b1c15d033bec_Discovery_PolicyDocument",Authority="System Center Configuration Manager",Revision=6 not found in namespace: root\microsoft\policyplatform\Documents\Local. CI not found.
For me that tends to confirm what occurs in the Software Center but hardly points to next hop for troubleshooting.

Windows 8.1 Software Center Issue

In my development environment I have two clients, one is Windows 7 SP1 and the other is Windows 8.1.
I have successfully deployed a required application to both clients. Now I am testing deploying an available application to both clients. The application is being deployed to a user group collection that separate users for each client are a member of.
The Windows 7 client can see the application in the Software Center and can successfully install it. However the Windows 8.1 client does not list anything in the Software Center but the application does show up in the application catalog when the link on
the Software Center is clicked.
I have been through numerous sites and tried removing the SCCM client and reinstalling it. I have made sure the client isn't still in provisioning mode.
Does anyone have any other thoughts or ideas as to what may be going on with the 8.1 client?

Hi,
Have you checked log about software center? Such as SCClient_<domain>@<username>_1.log, SoftwareCenterSystemTasks.log and SoftwareCatalogUpdateEndpoint.log.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Client Software Center - no items found.

hi there,
we are using software center as self-service portal for users and it's working quite good!
unfortunely i software center displays "no items found" on a specific computer, though the pc is in the correct collection.
i have re-installed sccm client, repaired wmi repository and also re-imported the machine into sccm 2012 but still no luck.
anyone can point me on a possible solution?
thank you!

Hello
we had exactly the same behavior. The Software Center shows everytime "No items found". After further tests we found that we could see applications in the Software Center, but still no packages.
After one day struggle we found the issue/solution. It seems that is not a bug, it is a feature....
Situation: Another user was logged in. It seems that the Software Center will only display packages for the first/default logged on user.
Solution: Make sure the previous user logs off completely (not just disconnected) and there are no users logged on to the machine before another user logs on.
The Applications do not have this restriction and will be displayed for all users logged on to the machine
Hope this helps

Newly created Applications do not appear in Software Center or Application Catalog

I'm still rather new to SCCM; but I'm slowly working towards configuring an application to be deployed to my clients via an application package that I configured. I set something up for deployment, and it's my understanding that the app should show
up in the software center for the users that it's deployed to.
However, I'm having an issue where not only is it not showing up, but it's not being installed on the clients I've deployed it to. The main problem is that I have no idea how to troubleshoot this - I don't know what logs to look at for issues (or where
the logs are); and I've been having a ton of trouble locating 'basic troubleshooting' info for application deployment.
If anyone could point me towards info that can get me on the right path for troubleshooting why my application isn't either automatically installing on the clients or why it isn't showing in the software center/application catalog, that would be very helpful.
Thanks!

I created the app on Monday, then did the deployment to a computer collection; Tuesday I read something that implied for it to show in software center it had to be deployed to a user collection, so I did that. I have told it to distribute the content
to all 3 of my distro points (three physical offices, one DP in each office), and I did that on Monday, then again on Tuesday when I deployed to the user collection.
Looking at it now, it seems as though the content hasn't been deployed to the other DP's yet though. When I go to Monitoring - Distribution Status - Content Status and select the application I created, it shows the status as 1 success (primary office/sccm
site/where the content was located when I created the package), and two as 'in progress' (other two sites), but has shown in progress for over 24h now. When I look at the further detail for the distribution - for one site the message shows last status
time of yesterday at 4:30pm and says "the content files for package <package id> have not yet arrived from the source site." the other one has the same last status time, but says "distribution manager instructed scheduler to send
package <package id> to child site."
So either the distribution is taking forever or it hasn't updated the status since it finished. Either way, maybe this is the par that I need to look into?

Is Software Center down?

This is probably the wrong place to ask, but I'm a n00b. I've been trying to download some firmware from the Software Center but always get the result "The connection to the server was reset while the page was loading." Is it broken? Any suggestions? Thanks.
(Trying to reach http://www.cisco.com/cisco/web/download/index.html)

Hi Christopher,
Can you try this link
http://www.cisco.com/cisco/software/navigator.html?a=a&i=rpm
Cheers!
Rob

How to clear/reset "Installed Software" in Software Center?

Hello!
I've done a big mistake with my application objects!
I did have two applications in SCCM 2012 with the same MSI-installation package. The reason for this is because i would like to have one that is deployed as Required (with primary device) and one that is deployed as Available for those without primary device.
Then I decided to only keep the available deployment, so i deleted the required appilcation entierly from SCCM.
Not so wise because now all the required installations is stucked in Software Center, at the "Installed Software"-tab. And there is noway to remove it.
So my question is, is there someway to reset or clear the information from software center? Or any other sulotion to my problem? :)
Best regards,
Johan Lång

It seems like it has removed the entries from the software client automatically now. But I still got problem with the main source of the problem. That I cant push out updates via software center.
Let me explain the main problem.
I had app1 as a MSI, and two application objects (AO). One AO as required and one as available, but the same MSI.
After a while I got an integration-application between app1 and another program, as a MSI so i decided to put that as a dependency to app1, but also pushed it out to all users as a required deployment, because it would not install it otherwise, if not the user
did an uninstall and then a fresh install of app1.
And for a couple of weeks ago I got my eyes on "automatically update any superseeded applications" while deploying. So i decided to use that with one AO instead of two (required/available). In the same time an update came to app1, lets call it
app1.1.
This was a perfect time to try my new discover and disabled app1 and superseeded it with app1.1 with a available deployment, with a dependency of the integration-application.
But the clients could not be updated automatically and when the user tried to update it manually via application catalog it get stucked at the last step "evaluate" before it jumps over to Software Center. And nothing else happen. Until it crasches
and warn about "it could not be evaluated" in the application catalog. Sometimes it pops up anyway in software center but it wont continue to install, and if you try to manually start the installation it get stucked at the status "Waiting"
and nothing happens.
If I login with another user I can start the installation manually and it works fine.
If I uninstall the sccm-client and install it back again, the "installed software" will be cleared and I can start the installations manually, so it pops up under "installed software" again. Without any problems.
It also worked to install if i removed the dependency of the integration-application.
So my guess is that something is getting corrupted in the user profile, but I cant find any files regarding sccm in there exept the log file for software center.
I hope you understand abit of what i try to explain :) Sorry for bad grammar!
Regards,
Johan

Kb2920730 shows up in software center but server has no Sharepoint

Similar Messages

Maybe you are looking for