KB2923545 remote sessions drop issue

In our environment we have Remote Desktop Services Host running patched and up to date Windows 2008 R2 Enterprise behind Remote Desktop Gateway running Windows 2012 R2 Standard. Dual Factor
Authentication from Windows Azure is used in our system as well.<o:p></o:p>
We experienced following strange behavior. Users with updated Windows 7 clients can successfully authenticate against RD Gateway, receive a call from Windows Azure DFA, authenticate
and establish remote session to RDSH. No issues while working in remote session until user need step back or minimize the active RD session window. After 120 seconds the session get dropped and reconnects immediately and the user receives another authentication
call from DFA.<o:p></o:p>
No errors on client side, no errors on DFA, RDG or RDSH servers, just entries that the session was disconnected and then reconnected.<o:p></o:p>
Running Wireshark on the clients side shows that the local computer sends RST, ACK which drops connection and then immediately sends SYN to RDG server with initiates connection reestablishment
and a call from DFA. <o:p></o:p>
We figured out that this behavior is related to the stations with KB2923545 installed. As soon as we remove mentioned KB, no session drops.<o:p></o:p>
Anybody experiencing the same and had found other solution then just removing windows update KB2923545? <o:p></o:p>

Hi,
Thank you for posting in Windows Server Forum.
Does this happen on any particular system with specific account?
As this KB is specific for the issue for your issue, here suggest you to install on another system or reinstall the KB after restating the system. And finally check with new user account without any permission.
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

ASP sites Session drop issue

My company has a product ordering site in .NET. 6 months ago, I have been receiving some customer's complains that the ordering site keeps logging them out and empty their shopping cart. They are Mac users. Therefore, we started to test with Safari and later expends to all OS and browsers combination (Firefox, IE, Chrome, Safari, MAC OS, XP, WIN 7,iPhone, iPad). We are able to replicate the case in random bases and all cases are in MAC OS (MacAir, iPhone, iPad) with Safari. Although we know the possible cause (MAC OS + Safar), we still have no clue of the root cause. Can anyone help here?

HI and welcome to Apple Discussions..
Deleting Safari cookies may help.
From the Safari menu bar click Safari / Preferences then select the Security tab. Click: Show Cookies.
Delete all cookies related to that site.
Now select the Autofill tab from the Preferences pane. Click Edit next to Other Forms
Click: Remove All.
Relaunch Safari.
Try deleting the cache.db file. Open a Finder window. Select the Home folder in the Sidebar on the left. It has a small house icon. Now open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari.
Carolyn

Session Stickiness Issue

Hi All,
I am facing session stickiness issue where we have four webserver instances and six weblogic instances.
If you see in the failure logs the JVM ID generated by the cookie is 1872775671 but the plugin is routing the request to 923706867.Please find below
Please find the success and failure logs below
Proxy Error Log :
================New Request: [amserver/UI/Login] =================
Wed Mar 20 15:01:10 2013 <202911363806070191> Uri as read from rq (request) data structure /amserver/UI/Login
Wed Mar 20 15:01:10 2013 <202911363806070191> Uri after pathTrim /amserver/UI/Login
Wed Mar 20 15:01:10 2013 <202911363806070191> Uri resolved to /amserver/UI/Login?module=GMACLoginModule&org=branch
Wed Mar 20 15:01:10 2013 <202911363806070191> resolveRequest return code is [0]
Wed Mar 20 15:01:10 2013 <202911363806070191> URI=[amserver/UI/Login?module=GMACLoginModule&org=branch]
Wed Mar 20 15:01:10 2013 <202911363806070191> INFO: SSL is not configured
Wed Mar 20 15:01:10 2013 <202911363806070191> Found cookie from cookie header: JSESSIONID=RKHWGqJvmJGWgZ9YdqywsXBLRd7QtMGX1Qr1yTmNTn0Kcdq0M0xq!-1872775671
Wed Mar 20 15:01:10 2013 <202911363806070191> Parsing cookie JSESSIONID=RKHWGqJvmJGWgZ9YdqywsXBLRd7QtMGX1Qr1yTmNTn0Kcdq0M0xq!-1872775671
Wed Mar 20 15:01:10 2013 <202911363806070191> getpreferredServersFromCookie: [-1872775671]
Wed Mar 20 15:01:10 2013 <202911363806070191> primaryJVMID: [-1872775671]
secondaryJVMID: []
Wed Mar 20 15:01:10 2013 <202911363806070191> No of JVMIDs found in cookie: 1
Wed Mar 20 15:01:10 2013 <202911363806070191> Trying to locate Primary or Secondary using SrvrInfo with JVMID: 923706867
Wed Mar 20 15:01:10 2013 <202911363806070191> getPreferredFromCookie: Start Position is 0, listLen is 1
Wed Mar 20 15:01:10 2013 <202911363806070191> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Wed Mar 20 15:01:10 2013 <202911363806070191> initJVMID: Iterating SrvrList from position 0
Wed Mar 20 15:01:10 2013 <202911363806070191> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[10.13.52.81] Port[7005] SecurePort[7006] useSSL [0] ioTimeout [30] socketTimeout [10]
Wed Mar 20 15:01:10 2013 <202911363806070191> INFO: New NON-SSL URL
Wed Mar 20 15:01:10 2013 <202911363806070191> Connect returns -1, and error no set to 245, msg 'Operation now in progress'
Wed Mar 20 15:01:10 2013 <202911363806070191> EINPROGRESS in connect() - selecting
Wed Mar 20 15:01:10 2013 <202911363806070191> Local Port of the socket is 63476
Wed Mar 20 15:01:10 2013 <202911363806070191> Remote Host 10.13.52.81 Remote Port 7005
Wed Mar 20 15:01:10 2013 <202911363806070191> URL::sendHeaders(): meth='HEAD' file='/bea_wls_internal/WLDummyInitJVMIDs' protocol='HTTP/1.0'
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[Connection]=[Close]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Wed Mar 20 15:01:10 2013 <202911363806070191> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 400 Bad Request]
Wed Mar 20 15:01:10 2013 <202911363806070191> URL::parseHeaders: StatusLine set to [400 Bad Request]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from WLS:[Date]=[Wed, 20 Mar 2013 19:01:10 GMT]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from WLS:[Content-Length]=[897]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from WLS:[Content-Type]=[text/html]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from WLS:[X-WebLogic-Cluster-Hash]=[7GHstOoW2dPEsRHcWrZe05SfKAc]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from WLS:[X-WebLogic-Cluster-List]=[923706867!168637521!7005!7006]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from WLS:[Connection]=[Close]
Wed Mar 20 15:01:10 2013 <202911363806070191> parsed all headers OK
Wed Mar 20 15:01:10 2013 <202911363806070191> initJVMID: Received the same cluster-list. Returning with no preferred servers found.
Wed Mar 20 15:01:10 2013 <202911363806070191> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Wed Mar 20 15:01:10 2013 <202911363806070191> getPreferredFromCookie: Found 0 servers
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[accept]=[image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[referer]=[https://capacity.dealerservices.ally.com/userprovisioning/jsp/autoSubmit.jsp?lang=en-us&source=MigratedLoginWidget&userType=branch&process=login]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[accept-language]=[en-US]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[user-agent]=[Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; BTRS99959; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; InfoPath.3)]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[accept-encoding]=[gzip, deflate]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[host]=[gdpcapacity.gmacbranch.gmac.gm.com]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[cache-control]=[no-cache]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[cookie]=[s_pers=%20s_ts%3D%255B%255B%2527BRA0006T%2527%252C%25271362265430952%2527%255D%252C%255B%2527BRA0005T%2527%252C%25271363804235955%2527%255D%255D%7C1521570635955%3B%20s_nr%3D1363805063050-Repeat%7C1366397063050%3B; Locale=en-us; MasterCookie=MasterCookie; GDP_screenHeight=768; GDP_screenWidth=1366; GDP_browserType=Microsoft%20Internet%20Explorer; GDP_browserVersion=4.0%20%28compatible%3B%20MSIE%208.0%3B%20Windows%20NT%206.1%3B%20Trident/4.0%3B%20BTRS99959%3B%20SLCC2%3B%20.NET%20CLR%202.0.50727%3B%20.NET%20CLR%203.5.30729%3B%20.NET%20CLR%203.0.30729%3B%20Media%20Center%20PC%206.0%3B%20MS-RTC%20LM%208%3B%20.NET4.0C%3B%20InfoPath.3%29; GDP_operatingSystem=Win32; GDP_userAgent=Mozilla/4.0%20%28compatible%3B%20MSIE%208.0%3B%20Windows%20NT%206.1%3B%20Trident/4.0%3B%20BTRS99959%3B%20SLCC2%3B%20.NET%20CLR%202.0.50727%3B%20.NET%20CLR%203.5.30729%3B%20.NET%20CLR%203.0.30729%3B%20Media%20Center%20PC%206.0%3B%20MS-RTC%20LM%208%3B%20.NET4.0C%3B%20InfoPath.3%29; JSESSIONID=RKHWGqJvmJGWgZ9YdqywsXBLRd7QtMGX1Qr1yTmNTn0Kcdq0M0xq!-1872775671; ObSSOCookie=tKGxD0YS6sUw8kyVwfVBNujGihNvtG5GlUrYljs%2F3fngJbUm4%2B1bA6FpLn3LEESIpQsqwhjMDZODuautF%2B7zHKXypTkT%2Fn8DwdGn%2FYZOJK49wBTU511DfkqBmqBMsGjSM42jobA5gSQ672vUQskytWaJc4tZQC7MDLOGPEJf%2Bwc%2BVtXRi1%2FRGI4ql8jQpyWSJP6ImkHwt6QNig3Vlyt9BLZws6vvgHulULaxuA%2BXfUZ4fkVaVwN35tAmWorUa1ODiORCWhVSrZybMhTk53NsjT%2FdOaXFLZM4wcj6PKVkeG1UtZVfoNuVw8LBBVd5ave0]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[gmacdealer_groups]=[smartcash:scsupervisor:branch:us:en-us:EOAdminUS:]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[HTTP_OBLIX_UID]=[cbrus16]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs from Client:[HTTP_OBLIX_UID]=[cbrus16]
Wed Mar 20 15:01:10 2013 <202911363806070191> attempt #0 out of a max of 5
Wed Mar 20 15:01:10 2013 <202911363806070191> Server details are ''/0/0
Preferred server not set or was marked bad, checking next preferred server
Wed Mar 20 15:01:10 2013 <202911363806070191> Server details are ''/0/0
Preferred server not set or was marked bad, checking next preferred server
Wed Mar 20 15:01:10 2013 <202911363806070191> Trying a pooled connection for '10.13.52.81/7005/7006'
Wed Mar 20 15:01:10 2013 <202911363806070191> getPooledConn: No more connections in the pool for Host[10.13.52.81] Port[7005] SecurePort[7006]
Wed Mar 20 15:01:10 2013 <202911363806070191> general list: trying connect to '10.13.52.81'/7005/7006 at line 1676 for '/amserver/UI/Login?module=GMACLoginModule&org=branch'
Wed Mar 20 15:01:10 2013 <202911363806070191> INFO: New NON-SSL URL
Wed Mar 20 15:01:10 2013 <202911363806070191> Connect returns -1, and error no set to 245, msg 'Operation now in progress'
Wed Mar 20 15:01:10 2013 <202911363806070191> EINPROGRESS in connect() - selecting
Wed Mar 20 15:01:10 2013 <202911363806070191> Local Port of the socket is 63477
Wed Mar 20 15:01:10 2013 <202911363806070191> Remote Host 10.13.52.81 Remote Port 7005
Wed Mar 20 15:01:10 2013 <202911363806070191> general list: created a new connection to '10.13.52.81'/7005 for '/amserver/UI/Login?module=GMACLoginModule&org=branch', Local port: 63477
Wed Mar 20 15:01:10 2013 <202911363806070191> WLS info : 10.13.52.81:7005 recycled? 0
Wed Mar 20 15:01:10 2013 <202911363806070191> URL::sendHeaders(): meth='GET' file='/amserver/UI/Login?module=GMACLoginModule&org=branch' protocol='HTTP/1.1'
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[accept]=[image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[referer]=[https://capacity.dealerservices.ally.com/userprovisioning/jsp/autoSubmit.jsp?lang=en-us&source=MigratedLoginWidget&userType=branch&process=login]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[accept-language]=[en-US]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[user-agent]=[Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; BTRS99959; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; InfoPath.3)]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[accept-encoding]=[gzip, deflate]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[host]=[gdpcapacity.gmacbranch.gmac.gm.com]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[cache-control]=[no-cache]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[cookie]=[s_pers=%20s_ts%3D%255B%255B%2527BRA0006T%2527%252C%25271362265430952%2527%255D%252C%255B%2527BRA0005T%2527%252C%25271363804235955%2527%255D%255D%7C1521570635955%3B%20s_nr%3D1363805063050-Repeat%7C1366397063050%3B; Locale=en-us; MasterCookie=MasterCookie; GDP_screenHeight=768; GDP_screenWidth=1366; GDP_browserType=Microsoft%20Internet%20Explorer; GDP_browserVersion=4.0%20%28compatible%3B%20MSIE%208.0%3B%20Windows%20NT%206.1%3B%20Trident/4.0%3B%20BTRS99959%3B%20SLCC2%3B%20.NET%20CLR%202.0.50727%3B%20.NET%20CLR%203.5.30729%3B%20.NET%20CLR%203.0.30729%3B%20Media%20Center%20PC%206.0%3B%20MS-RTC%20LM%208%3B%20.NET4.0C%3B%20InfoPath.3%29; GDP_operatingSystem=Win32; GDP_userAgent=Mozilla/4.0%20%28compatible%3B%20MSIE%208.0%3B%20Windows%20NT%206.1%3B%20Trident/4.0%3B%20BTRS99959%3B%20SLCC2%3B%20.NET%20CLR%202.0.50727%3B%20.NET%20CLR%203.5.30729%3B%20.NET%20CLR%203.0.30729%3B%20Media%20Center%20PC%206.0%3B%20MS-RTC%20LM%208%3B%20.NET4.0C%3B%20InfoPath.3%29; JSESSIONID=RKHWGqJvmJGWgZ9YdqywsXBLRd7QtMGX1Qr1yTmNTn0Kcdq0M0xq!-1872775671; ObSSOCookie=tKGxD0YS6sUw8kyVwfVBNujGihNvtG5GlUrYljs%2F3fngJbUm4%2B1bA6FpLn3LEESIpQsqwhjMDZODuautF%2B7zHKXypTkT%2Fn8DwdGn%2FYZOJK49wBTU511DfkqBmqBMsGjSM42jobA5gSQ672vUQskytWaJc4tZQC7MDLOGPEJf%2Bwc%2BVtXRi1%2FRGI4ql8jQpyWSJP6ImkHwt6QNig3Vlyt9BLZws6vvgHulULaxuA%2BXfUZ4fkVaVwN35tAmWorUa1ODiORCWhVSrZybMhTk53NsjT%2FdOaXFLZM4wcj6PKVkeG1UtZVfoNuVw8LBBVd5ave0]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[gmacdealer_groups]=[smartcash:scsupervisor:branch:us:en-us:EOAdminUS:]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[HTTP_OBLIX_UID]=[cbrus16]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[HTTP_OBLIX_UID]=[cbrus16]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[Proxy-Path-Translated]=[u001/webserver/docs/gdp-capacity-backend-sec/amserver/UI/Login]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[Proxy-Path-Translated-Base]=[u001/webserver/docs/gdp-capacity-backend-sec]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[WL-Proxy-Client-Keysize]=[128]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[WL-Proxy-Client-Secretkeysize]=[128]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[WL-Proxy-Client-IP]=[129.41.252.30]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[WL-Proxy-SSL]=[true]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[Proxy-Client-IP]=[129.41.252.30]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[X-Forwarded-For]=[129.41.252.30]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[Connection]=[Keep-Alive]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[X-WebLogic-KeepAliveSecs]=[30]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[X-WebLogic-Request-ClusterInfo]=[true]
Wed Mar 20 15:01:10 2013 <202911363806070191> Hdrs to WLS:[x-weblogic-cluster-hash]=[7GHstOoW2dPEsRHcWrZe05SfKAc]
Wed Mar 20 15:01:11 2013 <202911363806070191> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Wed Mar 20 15:01:11 2013 <202911363806070191> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Date]=[Wed, 20 Mar 2013 19:01:10 GMT]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Pragma]=[no-cache]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Location]=[https://gdpcapacity.gmacbranch.gmac.gm.com/portal/dt?action=process&provider=PortletWindowProcessChannel&windowProvider.targetPortletChannel=GMACDataProvider&containerName=GMACBranchHomeContainer&windowProvider.currentChannelMode=VIEW&window.portletAction=ACTION]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Content-Type]=[text/html]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Expires]=[0]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Set-Cookie]=[JSESSIONID=RKHW4QzDhbJpcQJJpXJ21CV3lxY2lbhNJYmtJCYGGK2BC71JTqGr!923706867; path=/]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Set-Cookie]=[iPlanetDirectoryPro=AQIC5wM2LY4Sfcwgaa%2Bz8dzyN5AAXxW2GEBHoRwWjfYUb9M%3D%40AAJTSQACMDI%3D%23; path=/]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Set-Cookie]=[AMAuthCookie=LOGOUT; expires=Thursday, 01-Jan-1970 01:00:00 GMT; path=/]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[X-AuthErrorCode]=[0]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[X-DSAMEVersion]=[6 2005Q1]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs from WLS:[Cache-Control]=[private]
Wed Mar 20 15:01:11 2013 <202911363806070191> parsed all headers OK
Wed Mar 20 15:01:11 2013 <202911363806070191> sendResponse() : uref_p->getStatus() = '302'
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[date]=[Wed, 20 Mar 2013 19:01:10 GMT]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[Pragma]=[no-cache]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[Location]=[https://gdpcapacity.gmacbranch.gmac.gm.com/portal/dt?action=process&provider=PortletWindowProcessChannel&windowProvider.targetPortletChannel=GMACDataProvider&containerName=GMACBranchHomeContainer&windowProvider.currentChannelMode=VIEW&window.portletAction=ACTION]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[content-type]=[text/html]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[Expires]=[0]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[Set-Cookie]=[JSESSIONID=RKHW4QzDhbJpcQJJpXJ21CV3lxY2lbhNJYmtJCYGGK2BC71JTqGr!923706867; path=/]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[Set-Cookie]=[iPlanetDirectoryPro=AQIC5wM2LY4Sfcwgaa%2Bz8dzyN5AAXxW2GEBHoRwWjfYUb9M%3D%40AAJTSQACMDI%3D%23; path=/]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[Set-Cookie]=[AMAuthCookie=LOGOUT; expires=Thursday, 01-Jan-1970 01:00:00 GMT; path=/]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[X-AuthErrorCode]=[0]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[X-DSAMEVersion]=[6 2005Q1]
Wed Mar 20 15:01:11 2013 <202911363806070191> Hdrs to client (add):[Cache-Control]=[private]
Wed Mar 20 15:01:11 2013 <202911363806070191> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Wed Mar 20 15:01:11 2013 <202911363806070191> closeConn: pooling for '10.13.52.81/7005'
Wed Mar 20 15:01:11 2013 <202911363806070191> request [amserver/UI/Login?module=GMACLoginModule&org=branch] processed successfully..................
Could some one let me know how to maintain the session stickiness and please do let me know why the JVM ID is getting changed.
Note : We are using cookie based replication in our environment.
Thanks & Regards
Arun

the CSS does not have the possibility to dynamically learn cookie.
So, you have to setup manually the value sent by each server.
According to your setup, the jsessionid would have a fix value after the first 33 bytes and the value will be 2 bytes long.
Is that correct ?
If yes, try to increase the string range.
Finally, it might be easier to use arrowpoint cookies.
Gilles.

Windows 2008 R2 Doesn't Allow DPI (Font Size / Scaling) Changes on Remote Sessions

I am using latest version of RDP Client 6.1 from my local Windows 7 Enterprise system, as well as RDP Client 6.1 from a Windows 2008 R2 server.
When I connect to other Windows 2008 R2 servers, I am unable to increase the DPI settings. In Control Panel > Ease of Access > Optimize Visual Display > Change the size of text and icons, I get a screen which says “The display settings
can’t be changed from a remote session”.
This is unacceptable. I am able to change this setting on any Windows 2008 (pre-R2) server in multiple environments. When is MSFT going to fix this issue in R2?
I have seen other posts on this issue
such as this one -- one person suggests exporting the registry settings under
[HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics and then to set them on my R2 server.
Can I export those registry keys from a 2008 (non-R2) server where I have set the DPI to 125%, and then import them onto the R2 server?
Thank you.

This sort of works:
Run this .reg file and logoff/logon.
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics]
"BorderWidth"="-15"
"CaptionFont"=hex:f2,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,00,\
00,00,00,01,00,00,00,00,54,00,72,00,65,00,62,00,75,00,63,00,68,00,65,00,74,\
00,20,00,4d,00,53,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"CaptionHeight"="-375"
"CaptionWidth"="-270"
"IconFont"=hex:f2,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\
00,00,01,00,00,00,00,54,00,61,00,68,00,6f,00,6d,00,61,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"IconSpacing"="-1125"
"IconTitleWrap"="1"
"IconVerticalspacing"="-1125"
"MenuFont"=hex:f2,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\
00,00,01,00,00,00,00,54,00,61,00,68,00,6f,00,6d,00,61,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"MenuHeight"="-285"
"MenuWidth"="-270"
"MessageFont"=hex:f2,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\
00,00,00,01,00,00,00,00,54,00,61,00,68,00,6f,00,6d,00,61,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ScrollHeight"="-255"
"ScrollWidth"="-255"
"Shell Icon BPP"="16"
"SmCaptionFont"=hex:f2,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,\
00,00,00,00,01,00,00,00,00,54,00,61,00,68,00,6f,00,6d,00,61,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"SmCaptionHeight"="-255"
"SmCaptionWidth"="-255"
"StatusFont"=hex:f2,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\
00,00,00,01,00,00,00,00,54,00,61,00,68,00,6f,00,6d,00,61,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"Shell Icon Size"="32"
"MinAnimate"="1"

Force PowerShell version on remote session

Hi, as the title suggest, I want to explicitly use PowerShell 2.0 to execute scripts and commands, why? Because SharePoint 2010 only supports PowerShell 2.0. So my problem:
I have SharePoint 2010 installed on a Windows Server 2012 (with PowerShell 4.0 as default). When I execute a SharePoint PowerShell command on the server, it only works when I go to a PowerShell 2.0 console (powershell.exe
-v 2). But when I am on another server and start a PowerShell 2.0 console, the remote session I create with e.g. Enter-PSSession is always PowerShell 4.0, the version of the host. This will prevent me from executing SharePoint commands remotely
So my question is, is it possible in some way to force a specific version of PowerShell with a remote session?

Hi TechPeepz,
To start powershell 2.0 on remote session, please refer to the steps below:
Server02 remote access Server01
1. Run the cmdlet below on server01
Register-PSSessionConfiguration -Name PS2 -PSVersion 2.0
2. Run the cmdlets below on server02
$s = New-PSSession -ComputerName Server01 -ConfigurationName PS2
Enter-PSSession -Session $s
For more detailed information, please refer to this article:
Starting the Windows PowerShell 2.0 Engine
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

No Remote session after disconnect

We have the problem that AFTER a disconnect of a remote session we get the message:
"Failed to connect to server (DNShostName~50)" - actually in German it reads "Fehler beim Herstellen einer Verbindung mit dem Server (DNShostName~50)"
The initial remote session works, only if it breaks a reconnect is only possible after a reboot of the remote host. In addition the client does not lock the screen if the connection is lost.
I noticed that the listening IP stack does not listen any longer. Before the problem, when doing a "netstat -a -b" I can see 2 entries for nzrWinVNC.exe:
Proto Lokale Adresse Remoteadresse Status
TCP 0.0.0.0:5950 LWS71127:0 ABHREN
[nzrWinVNC.exe]
TCP [::]:5950 LWS71127:0 ABHREN
[nzrWinVNC.exe]
But both listening ports are gone after I have lost the remote session.
We have ZCM 10.3.3 on Win7 64bit with an internal CA and MS-SQL DB. Problem exists at least since 10.3.0
Most important policy settings:
Remote Control Settings
x Allow managed device to be controlled remotely
x Ask permission from user on managed device before starting Remote Control
x Give visible signal to the user on the managed device during Remote Control
_ Give audible beep to the user on the managed device every seconds during Remote Control
x Allow managed device screen to be blanked during Remote Control
x Allow managed device mouse and keyboard to be locked during Remote Control
x Allow screen saver to be automatically unlocked during Remote Control
x Automatically terminate Remote Control session after inactivity of "30" minutes
Password Authentication
x Enable password based authentication
Minimum password length "7"
Password type
_ Session
x Persistent
x Allow user to override default passwords on managed device
Default ZENworks password:
_ Clear password (if any)
x Set password
Default VNC password:
_ Clear password (if any)
x Set password (password should not exceed 8 characters)
Intruder Detection
x Enable Intruder Detection
Suspend accepting connections after "5" successive invalid attempts
Automatically start accepting connections after "10" minutes
Session security
_ Enable Session Encryption
x Allow connection when Remote Management Console does not have SSL certificate
Allow up to "2" levels in Viewer certificate chain
Abnormal termination
x Upon abnormal termination of remote sessions, "Lock Device"

BachmannK,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Remote Desktop Manager - "Unable to enumerate remote sessions"

Using RDCMan v2.2 build 2.426 downloaded from http://www.microsoft.com/download/en/details.aspx?id=21101
Client is Windows 7 x64 SP1
Servers vary from Windows Server 2003 R2 to Windows Server 2008 R2 with same result
Error message when attempting to logoff a session either individually or as a group:
"Unable to log off from [servername] Reason: Unable to enumerate remote sessions."

I have the same error message, and I'm fairly certain it's not related to the access rights of any particular remote user, but initially I thought: kudos to the comment about this involving the Console session, because that's what I'm doing.
I have a half dozen Windows Server 2012 R2 VMs I am connecting to, all on a workgroup (no domain, so no domain admin accounts). I am logging onto each VM as the Administrator user (this is a testing / development environment so I'm happy with this
approach). Windows Firewall is disabled for Domain/Private/Public, and no third party firewall or AV program has been installed. I am logged onto my local PC as a workgroup user who is a member of the Administrators group on my local PC, but which
does not exist on the VMs. UAC is disabled in all locations. I am connecting to the console session on all of the servers. I am connecting to the console session on all servers. I am also connecting to these servers behind a NAT-enabled
router, so I connect to 6 VMs using one IP address, but with a different port for each.
1. Running RDCM as an administrator changed nothing (as expected, since I'm already a local administrator).
2. Connecting to a server non-console ("Connection Settings" tab, "Connect to Console" unchecked) did not fix the issue.
3. I read that the following registry key may not exist (but it did, so not my fix):
"HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\AllowRemoteRPC” DWORD value should be 1.
Hopefully this info helps someone in their quest to find a solution. I am able to log onto a group of servers and disconnect from the same group of servers, but it would be nice if logging off of those servers also worked. It seems the issue
is simply that the user I launch RDCM with on my local PC is not a user on the remote PC (no domain), and the request to log off is being sent as the local user of RDCM instead of the user which is logged onto the remote PC. So for those of us without
domains, maybe there is no workaround?
Ha! I didn't try the last solution! This worked for me:
"HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\AllowRemoteRPC” DWORD value should be 1.

Mail: Problem with copy&paste from Remote Session

Hi,
I have a problem to copy just text from remote session (MS RDP Client) directly into an email. It always shows a contact .
The workaround is to paste into any other app, it doesn't matter which one. It works with Outlook for Mac but not with Mail. Does someone have the same issue and maybe a solution?
Due to connection issues I cannot use Outlook outside the company... so not an alternative at the moment.
Thanks

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Only administrators have permission to add, remove, or configure server software during a terminal service remote session.

Hello
I have been trying to install Office 2010 Pro Plus onto a Server 2003 Terminal Services server. We have an OVS license and I have followed all the procedures (and variations) noted in
http://technet.microsoft.com/en-us/library/ff506201.aspx . However, we still get the error message 'Only administrators have permission to add, remove, or configure server software
during a terminal service remote session.' when users logon via an RDP session. If they logon locally, the applications start without problem. I have tried the manual and .msp setup, installed via the 'Add\Remove Programs, install using the command line with
'Change User /install' and then 'Change User /execute'. None of this stops the message and allows the users to use Office via TS.
Is there a step missing from the Technet site that I need to get the users working?
Any ideas would be really appreciated.
Thank you

This has not fixed my issue. I still get the message "Only administrators have permission to add, remove, or configure server software during a terminal service remote session". If I add the user into the local admins group. When I login as the
user in question or any user onto the server in question the message above appears.
When I run Lync from the shortcut on the remote drive it works. But when I run it from the desktop and start menu it displays the above error. I spoke to Ctrix who have said that it is a permissions issue. I have checked and all permissions seem to be the
same.
Please can you help?
Kind Regards, PenDraKon

BGP Session drops when loading routes into a VRF

I've configured a small MPLS network with 4 P routers (ASR 1002s) 4 PE routers (6509s) and two Cisco 7206s as route reflectors. I'm using OSPF as the routing protocol on the PE-CE interfaces and have sham links configured between PE routers. I currently have two VRFs configured on this network, one is working fine, and there are approximately 150 routes in this VRF.
The second vrf is configured, it also has ospf sham links configured, neighbors up, etc.
The problem I have is that when I bring up the first PE-CE link and load about 7000 routes into the second vrf my BGP sessions between the other PEs and route-reflectors start timing out. I do show the vpnv4 routes show up in the route-reflectors "sh ip bgp vpnv4 rd 14017:2" I believe the debug outputs below indicate the issue is in the route-reflectors, but was curious if anyone else had seen this issue. The BGP peering IP address for one of the route-reflectors is 10.2.0.7 and one of the session dropping PEs is 10.2.0.13.
Normal output from "unloaded" debug ip bgp vpnv4 unicast keepalives:
Route-reflector output:
May 16 09:35:31   2329: May 16 09:35:30.718 CDT: BGP: ses global 10.2.0.13 (0xA0519C0:1) Keep alive timer fired.
May 16 09:35:31   2330: May 16 09:35:30.718 CDT: BGP: 10.2.0.13 KEEPALIVE requested (bgp_keepalive_timer_expired)
May 16 09:35:31   2331: May 16 09:35:30.718 CDT: BGP: ses global 10.2.0.13 (0xA0519C0:1) service keepalive IO request.
May 16 09:35:31   2332: May 16 09:35:30.718 CDT: BGP: 10.2.0.13 KEEPALIVE write request serviced in BGP_IO
PE output:
May 16 09:35:38.421 CDT: BGP: 10.2.0.7 KEEPALIVE requested (bgp_keepalive_timer_expired)
May 16 09:35:38.421 CDT: BGP: 10.2.0.7 KEEPALIVE sent
Route-reflector output:
May 16 09:35:39   2341: May 16 09:35:38.427 CDT: BGP: 10.2.0.13 received KEEPALIVE, length (excl. header) 0
Same output but during a "loaded" condition:
Route-reflector output:
May 15 20:41:31   774: May 15 20:41:31.015 CDT: BGP: ses global 10.2.0.13 (0xA091324:1) Keep alive timer fired.
May 15 20:41:31   775: May 15 20:41:31.015 CDT: BGP: 10.2.0.13 KEEPALIVE requested (bgp_keepalive_timer_expired)
May 15 20:41:31   778: May 15 20:41:31.015 CDT: BGP: ses global 10.2.0.13 (0xA091324:1) service keepalive IO request.
May 15 20:42:29   793: May 15 20:42:28.363 CDT: BGP: ses global 10.2.0.13 (0xA091324:1) Keep alive timer fired.
May 15 20:42:29   794: May 15 20:42:28.363 CDT: BGP: 10.2.0.13 KEEPALIVE requested (bgp_keepalive_timer_expired)
May 15 20:43:23   805: May 15 20:43:22.638 CDT: BGP: ses global 10.2.0.13 (0xA091324:1) Keep alive timer fired.
May 15 20:43:23   806: May 15 20:43:22.638 CDT: BGP: 10.2.0.13 KEEPALIVE requested (bgp_keepalive_timer_expired)
May 15 20:43:33   813: May 15 20:43:33.934 CDT: %BGP-3-NOTIFICATION: received from neighbor 10.2.0.13 4/0 (hold time expired) 0 bytes
PE output:
May 15 20:43:33.927 CDT: %BGP-3-NOTIFICATION: sent to neighbor 10.2.0.7 4/0 (hold time expired) 0 bytes
May 15 20:43:33.927 CDT: %BGP-5-ADJCHANGE: neighbor 10.2.0.7 Down BGP Notification sent
Route-reflector output:
May 15 20:43:34   814: May 15 20:43:33.934 CDT: %BGP-5-ADJCHANGE: neighbor 10.2.0.13 Down BGP Notification received
It appears to me that we are missing "BGP: 10.2.0.13 KEEPALIVE write request serviced in BGP_IO"
For full disclosure there are other BGP keep-alive events going on to the other PEs at this time, some passing, some failing.
route-reflector info:
route-reflector1#sh inv
NAME: "Chassis", DESCR: "Cisco 7206VXR, 6-slot chassis"
PID: CISCO7206VXR      , VID:    , SN: 37050753
NAME: "NPE-G2 0", DESCR: "Cisco 7200 Series Network Processing Engine NPE-G2"
PID: NPE-G2            , VID: V03 , SN: JAF1410AADM
NAME: "disk2", DESCR: "256MB Compact Flash Disk for NPE-G2"
PID: MEM-NPE-G2-FLD256 , VID:    , SN:
NAME: "Power Supply 1", DESCR: "Cisco 7200 AC Power Supply"
PID: PWR-7200-AC       , VID:    , SN:
NAME: "Power Supply 2", DESCR: "Cisco 7200 AC Power Supply"
PID: PWR-7200-AC       , VID:    , SN:
route-reflector1#sh ver
Cisco IOS Software, 7200 Software (C7200P-ADVIPSERVICESK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 19:41 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, 7200 Software (C7200P-BOOT-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
route-reflector1 uptime is 15 weeks, 20 hours, 43 minutes
System returned to ROM by reload at 11:03:48 UTC Thu Jan 31 2013
System restarted at 12:37:52 CST Thu Jan 31 2013
System image file is "disk2:c7200p-advipservicesk9-mz.151-4.M5.bin"
Any thoughts on this problem would be greatly appreciated.

Hi again,
did you check this?
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a008010a28a.shtml
I honestly do not remember the defaults in Cisco but I had a very similar issue working with Juniper because of this value was set @ about 4500 prefixes at once.
Take care
Alessio
Sent from Cisco Technical Support iPad App

The remote session was disconnected because there are no Remote Desktop License Servers available to provide a license. Please contact the server administrator.

I recently installed 21 Remote Desktop Services (RDS) User CALs on my Server 2012 standard computer. It was an Open License donation from Microsoft as we are a non-profit. After installing them successfully (I installed them as USER and not DEVICE)
the warning message that my "remote desktop services will expire in 63 days" message no longer appears :) however, I can no longer connect to our server remotely. Our staff needs to access a single data management program on a daily basis and
that program is housed on our server computer.
I know that the solution to this is probably easy (like checking a box or installing a component). Can you please help? Why would we have been able to access the server remotely before the install of RDS User CALs and not after?
Thank you for your time and help in this regard.

Hi,
Thank you for your posting in Windows Server Forum.
First of all the user which you want to provide access for remote session must be member of “Remote Desktop User” local group.
In regards to your error it seems that your RDS license server not able to locate the license server properly and licensing mode not configured properly. To resolve this issue you can try to change the Licensing mode or need to call the MS clearing house to
reactivate the license server in a correct mode. You must have all the license paper and all related document on hand and then call clearing house, explain them your issue and they will help you to reactivate it.
Please check beneath article for additional details.
Event ID 26: Your terminal services temporary client license will expire in N days (Only for reference as the link is for server 2003)
RD Licensing Configuration on Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

Remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator

Hi,
I am getting this error from windows server : remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator.
Remote desktop Session Host Server Configuration Details:
The RD licensing Diagnoser(WIN-909xxxxxxxxxxx):
Number of license available for clients : 0
Remote Desktop Session Host server version: Windows server 2012 R2
Active Directory Domain : Not applicable
Licensing mode : Not configured
Now, Down I am getting this error as well shown by the system:
RD licensing Diagnoser Information- 2 errors:
Win-909xxxxxxxxxx : licensing mode for the Remode Desktop Session Host Server is not configured.
Win-909xxxxxxxxxx : The grace period for the Remote Desktop Session Host server has Expired, but the RD Session Host server has not been configured with any license servers. connections to the RD Session Host server will be denied
unless a license server is configured for the RD Session Host server.
Now my kestion is :
Do I need to buy a license key of the windows server to not getting this error or it may continue appear even if I purchased the license and not configure RDS and AD.
Do I need to configured only RDS and AD and buy the license key of windows server later because I still have 55 day of trial.
Do I just buy the RDS client access license (L).
Please could you help on this, am new in windows server?

Hi,
As the message indicates, the grace period for the Remote Desktop Session Host server has Expired, you need to purchase and install RDS CALs. Also, you need to configure related settings
to continue using Remote Desktop Services. Otherwise, you cannot connect to the server remotely.
References:
Understand the licensing grace period
http://technet.microsoft.com/en-us/library/hh553157(v=ws.10).aspx
Install and issue RDS CALs or TS CALs
http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
Specify the Remote Desktop Licensing Mode on an RD Session Host Server
http://technet.microsoft.com/en-us/library/cc754487.aspx
Specify a License Server for an RD Session Host Server to Use
http://technet.microsoft.com/en-us/library/cc770585.aspx
Meanwhile,
1. AD is not required for RDS. However, it is recommended.
2. As you do not purchase Windows Server and related licenses as well, I suggest you contacting Microsoft sales or partner firstly.
How to buy Windows Server 2012 R2
http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx
Best Regards.
Jeremy Wu
TechNet Community Support

Black screen after successful login into Remote Session

Hi,
I am having windows 8.1 pro(64bit) and windows 7 pro(64bit) machines using which i am trying to connect to a remote VM with windows 7 enterprise through vpn client 5(64bit). After successful login, BLACK SCREEN with Connection bar is displayed. Ctrl+Alt+End
did not work.
In fact, a strange behaviour experienced. After failing once, i tried again with IP address instead of host name. Bingo, it works well. Then disconnect and try to reconnect, problem repeats. What i mean is, the problem is neither Consistent not persistent.
I am frustrated trying to solve the issue. Blogs, forums, communities.... where ever what ever solutions suggested, tried without any luck. Any help please ? Thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that you facing Black screen issue, but when you tried with IP address you can logon to the remote session but during reconnection issue repeats. Correct me if misunderstand your case.
From last how may days you are facing this issue?
Can you find any suitable error\event ID for this case?
For this firstly please check that you have proper connectivity between systems. Please check that you can Ping successfully to the remote system with IP address and hostname.
Might this issue caused by some stopped service “Desktop window manager session” which stop after RDP login. You can check the status as follow.
1. After the issue appear, please use RDP connect to the computer again and check the Desktop Window Manager Session Manager service status.
2. Then, please restar the computer and check System Event log to check if has a Desktop Window Manager Session Manager service error.
Hope it helps!
Thanks.
Dharmesh Solanki

Local Devices not found while on Remote Session

Hopefully someone in the forum will have an idea where I am failing.
I have an hp laptop (model 15--b123cl) running windows 8.1.
I am Remote Desktop Connecting into my Server running Windows 7 Professional SP1.
Both my hp laptop and the server have all Updates installed (including KB 2830477 for Windows 7 SP1).
I have checked all options in my Remote Desktop Connection (Show Options) Local Resources tab to allow Local Devices and Printers to be available on my laptop (the client) while in a remote session on my server.
(Checked Printers, Clipboards and all options under "more" such as Ports, Drivers, etc.)
The connection works fine but no local devices (printers, thumbdrives, etc.) are visible or accessible while in the remote session. My laptop recognizes the devices being plugged into the USB port (tone sounds), but the device will not show up in the
remote session. (They are shown on my local hp when I minimize the Remote connection.)
My real need is to print to my hp printer while logged onto the remote server. I have an hp Officejet Pro 8600 which I have plugged-in to my laptop USB. I relalize that while in remote connections I won't find wireless devices
on my local (client) network unless mapped to a LPT or COM port, so I hard-plug into my USB. I have also tried mapping my printer to a second port such as LPT2 or COM1 - still no luck.
No matter what I have tried or read about Remote Desktop Sessions, I can not get my Local hp Printer to show up while in my remote session. Any ideas?
Thanks
SL in Virginia

Hi Avi,
Thanks for your reply!
I am using JDeveloper version 9.0.3.1035!
When I say it works in JDeveloper, I do mean the embedded server.
In JDeveloper I have two projects, a) a session bean project and b) an entity bean project.
I can run my code fine against the embedded server.
However once I deploy the two jars to the standalone server things fall apart.
When I reverted back to putting the session beans & entity beans all in one jar everythinh worked fine.
However, I do not want to do this, I want to maintain my entity beans independently ( for maintenance & de- coupling reasons).
So, I guess what I really want, is to see in black and white that local references do or do not traverse different jars on the same server.
thanks,
Kevin

Unable to Change Screen Resolution in Remote Session - Windows Server 2012 R2

Does anybody know of a way to allow Remote Desktop users to adjust their own screen resolution in a remote session under Windows Server 2012 R2? We are struggling with this and can't seem to find a solution.
When users login to their RDP session and try to adjust their screen resolution this message is displayed in Control Panel:
"The display settings can't be changed from a remote session."
We don't want to use the "make text and other items larger or smaller" scaling feature, as this produces undesirable results with some of our applications. We also don't want to have to support multiple types of RDP clients or RDP shortcut
files.
We have looked at other posts but can't find an answer that applies to Windows Server 2012 R2. The closest thing we could find is KB2726399, but it only applies to Server 2008.
Does anybody have a solution for Server 2012?
Thanks

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

KB2923545 remote sessions drop issue

Similar Messages

Maybe you are looking for