KB3045999 (MS15-038) causing multiple exe failures (0xc0000018)

I'm seeing an issue on nearly 70 pc's after installing KB3045999. The dialog that appears over and over is "APP NAME: The application was unable to start correctly (0xc0000018). Click OK to close the application." This happens upon
first boot after installing the update. taskmgr.exe fails, cmd.exe fails, explorer.exe, mmc.exe, and many others. Some apps continue to work like firefox or chrome. If I remove this update, the symptoms go away.
Windows 7 Professional sp1 x64
Dell Optiplex 9020 (not limited to this model)

McAfee has notified us of an issue with DLP Endpoint and KB3045999. We run DLP on the machines that were affected.
McAfee KB8453
Environment
McAfee Data Loss Prevention Endpoint (DLP Endpoint) 9.x
Microsoft Windows 7
Problem
Several applications fail to start after you install Microsoft Patch MS15-038 on systems with DLP Endpoint. Affected applications include, but are not limited to:
CMD.EXE
Explorer.EXE
MMC-based applications
Microsoft Office applications
PowerShell
Example startup errors include:
csc.exe- Application Error -- The application was unable to start correctly (0xc0000142)
iexplore.exe- Application Error -- The application was unable to start correctly (0xc0000018)
mmc.exe- Application Error -- The application was unable to start correctly (0xc0000018)
cmd.exe- Application Error -- The application was unable to start correctly (0xc0000018)
Cause
This issue is currently under investigation.
Solution
Intel Security is investigating this issue. Contact Technical Support and quote this article number.
Microsoft is also investigating this issue. Please open a support ticket with Microsoft as well.

Similar Messages

Warning about KB3045999 MS15-038

This patch breaks many applications. In particular it breaks many virtual apps built from ZAV and other virtualization app builders.
Can uninstall patch using the following command:
wusa /uninstall /kb:3045999 /quiet /norestart (not sure on the /norestart option, but it will auto restart normally, found out hard way.)
-Mike

Ok, looks like it only applies to 'older' zav apps. should be ok with newer versions, we built several of our apps before 2012, ZAV versions after 2012 should not be affected according to support.
https://support.spoon.net/customer/p...hine-component

DO NOT INSTALL KB3045999 MS15-038

On windows 7 (maybe some others as well)
Installing the listed patch will break ZAV apps with the following error:
The application was unable to load a required virtual machine component. Please contact the publisher of this application for more information.
It may also break other programs.
Can uninstall patch using the following command:
wusa /uninstall /kb:3045999 /quiet /norestart (not sure on the /norestart option, but it will auto restart normally, found out hard way.)

Ok, looks like it only applies to 'older' zav apps. should be ok with newer versions, we built several of our apps before 2012, ZAV versions after 2012 should not be affected according to support.
https://support.spoon.net/customer/p...hine-component

An account failed to log on unknown username or password. Causing Login audit failures

I have a SBS11 Essentials server that is getting audit Failures over and over again. There computer account says it's the SBS11 server it's self. It says unknown user name or bad password. I have checked for scheduled tasks, backup jobs, services and
non of them are using any special user accounts. I have used MS network monitor and can't find anything helpful to lead to the issue. All computers in the network are running Windows 7. The domain functional level is 2008 R2.
I get a the 4768 event ID about a Kerberos event and then just after I get a Event ID 4625 account failure with Logon Type 3. I have includes the events below. I need to figure what is causing the audit failures as my GFI Test Hacker alert is
catching it every morning. Disabling the Test Hacker alert is not a option. I have used Process Explorer also but can't seem to pin it down. I also enabled Kerberos logging.
http://support.microsoft.com/kb/262177?wa=wsignin1.0. All event codes state its a unknown or no existing account but how do I stop it from happening?
This is from the System Event log
A Kerberos Error Message was received:
on logon session TH.LOCAL\thsbs11e$
Client Time:
Server Time: 14:59:53.0000 3/4/2014 Z
Error Code: 0x6 KDC_ERR_C_PRINCIPAL_UNKNOWN
Extended Error:
Client Realm:
Client Name:
Server Realm: TH.LOCAL
Server Name: krbtgt/TH.LOCAL
Target Name: krbtgt/[email protected]
Error Text:
File: e
Line: 9fe
Error Data is in record data.
This is from the Security Event log
A Kerberos authentication ticket (TGT) was requested.
Account Information:
Account Name: S-1-5-21-687067891-4024245798-968362083-1000
Supplied Realm Name: TH.LOCAL
User ID: NULL SID
Service Information:
Service Name: krbtgt/TH.LOCAL
Service ID: NULL SID
Network Information:
Client Address: ::1
Client Port: 0
Additional Information:
Ticket Options: 0x40810010
Result Code: 0x6
Ticket Encryption Type: 0xffffffff
Pre-Authentication Type: -
Certificate Information:
Certificate Issuer Name:
Certificate Serial Number:
Certificate Thumbprint:
Certificate information is only provided if a certificate was used for pre-authentication.
Pre-authentication types, ticket options, encryption types and result codes are defined in RFC 4120.
I then get teh following error in the next event
An account failed to log on.
Subject:
Security ID: SYSTEM
Account Name: THSBS11E$
Account Domain: TH
Logon ID: 0x3e7
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x25c
Caller Process Name: C:\Windows\System32\lsass.exe
Network Information:
Workstation Name: THSBS11E
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: Schannel
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

Well I opened the case for him and he never followed up with Microsoft :-(
It's a kerberos issue, we're told to ignore it. Would you be willing to be patient and stubborn and work with CSS to at least understand what's going on better? I can tell you it's normal with Essentials but not the exact technical reason it's
happening.
Unfortunately TechNet isn't coming back, sorry folks :-(

Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too

Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too
a. User trying to create delivery but stock not available.
b. When stock is not there it should show an error message in SAP screen but its not - like stock not available etc
c. Fedex gets delivery notice for the delivery; if its more than zero it will create delivery otherwise less than zero it won’t accept.
d. But issue its creating even its less than zero
Is there anyone who can help me out...

When one is created with zero quantities it starts blocking our deliveries from getting through to fedex because deliveries will in doubt have been blocked at fedex. As we process our orders in morning and if there is an STO blocking orders, it will be in afternoon .
Any suggestions !!!

Error messages in 2651XM GW, cause outbound call failure, reboot fix it

Cisco 2651XM as Gateway, it keep posting these error message and after a period of time, it cause outbound call failure.
Reboot fix it but there're still error messages...
How to fix it? It's IOS bug or hardware issue? How to identify?
Cisco IOS Software, C2600 Software (C2600-IPVOICE-M), Version 12.3(8)T10, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 03-Aug-05 20:45 by hqluong
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
cpchn1-g1 uptime is 6 hours, 56 minutes
System returned to ROM by reload at 03:52:44 NZST Tue Apr 17 2007
System restarted at 03:56:27 NZST Tue Apr 17 2007
System image file is "flash:c2600-ipvoice-mz.123-8.T10.bin"
Cisco 2651XM (MPC860P) processor (revision 0x100) with 118784K/12288K bytes of memory.
Processor board ID JAE072000AJ (1555074759)
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
62 Serial interfaces
2 Channelized E1/PRI ports
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
See attach detail error messages

Cisco 2651XM as Gateway, it keep posting these error message and after a period of time, it cause outbound call failure.
Reboot fix it but there're still error messages...
How to fix it? It's IOS bug or hardware issue? How to identify?
Cisco IOS Software, C2600 Software (C2600-IPVOICE-M), Version 12.3(8)T10, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 03-Aug-05 20:45 by hqluong
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
cpchn1-g1 uptime is 6 hours, 56 minutes
System returned to ROM by reload at 03:52:44 NZST Tue Apr 17 2007
System restarted at 03:56:27 NZST Tue Apr 17 2007
System image file is "flash:c2600-ipvoice-mz.123-8.T10.bin"
Cisco 2651XM (MPC860P) processor (revision 0x100) with 118784K/12288K bytes of memory.
Processor board ID JAE072000AJ (1555074759)
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
62 Serial interfaces
2 Channelized E1/PRI ports
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
See attach detail error messages

Retention guarantee causing multiple DML operations to fail ?

WARNING: Enabling retention guarantee can cause multiple DML operations to fail. Use with caution.
^^
From the Ora Docs (10.2) Section - Introduction to Automatic Undo Management (Undo Retention) states the above.
This would mean that other DML operations if requiring space in undo, would therefore fail with a ORA-30036 error. Is this correct understanding ?
If so then one way to avoid this ORA error is to have autoextend defined. ??

From the Ora Docs (10.2) Section - Introduction to Automatic Undo Management (Undo Retention) states the above. Is it from
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/undo.htm#sthref1482
>
This would mean that other DML operations if requiring space in undo, would therefore fail with a ORA-30036 error. Is this correct understanding ? Not all DML operations requiring undo space would fail; only those transactions for which there is no space left in undo tablespace would fail. And yes this is one of the possible error messages that one can get.
If so then one way to avoid this ORA error is to have autoextend defined. ??Yes but that is just pushing the brick wall two feet away. Besides, with auto extension turned on and inappropriate undo_retention parameter settings, you will have issues with disk space (if any).

What causes multiple entries in my calender events in my iPhone 4s?

What causes multiple entries in my calender events on my iPhone 4s?

Hi jeffpetit,
Here is a link that will help you troubleshoot this issue with the camera on your iPhone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Option Icon 452 is causing a critical failure. Suggestions?

Option Icon 452 is causing a critical failure as soon as I put it into the USB slot. It seems that loading the wrong drivers for it or thinking its something that its.
Each time I put the 452 into the USB slot I immediately get an error in which the screen takes on a shade of gray and a black box in 6 languages appears saying "You need to restart your computer. Hold down the power button until it turns off" - I cannot do anything besides that and if I leave the modem attached and restart the same error appears as soon as it boots up. Once I take it off I'm able to restart normally again. Not sure what that problem is but it seems rather critical.
I'm not having any other problems with my macbook and I have a friend who tested the Option iCon 452 on his macbook and had no problems. So I'm kinda muddled.
thanks for any suggestions.

Runaway org.postfix.master if you want to take a look at it. Linc.
Tried a old hack, no go.
https://discussions.apple.com/thread/3184945?tstart=0

What would cause multiple error lines to appear using validator logic

What would cause multiple errors to appear for a single line as shown below. I coded Regular Expression Validator with a specific matching pattern and all the patterns work fine. When I key in an invalid pattern on a row I get the following errors dislayed. Why am I getting multiple error lines instead of one. Also when the data in the field is in error the field gets cleared. How do I fix this problem?
Error
java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.

Looks as though my RegEx script is not coded properly so it is causing the problem.
This is my regex script
8([0-9]{3})|8([0-9]{0,2}\%)
I changed the script above to the following to slowly build the script back to get rid of these multiple errors that are appearing. When I set my regex script to the following then I just get the one error line.
([0-9]{4})
I thought the regex script was working but when I key an invalid value I get 8 error lines as shown above. That should not be happening. This regex script
8([0-9]{3})|8([0-9]{0,2}\%)
is to perform the following logic:
The field I am editing is 4 characters long.
1) The first character must be an 8 and the next 3 charaters must be any character from 0-9
OR
2) The first character must be an 8, the next 0-2 characters must be any character from 0-9, the next non-blank character after any digits must be a wild card character of %
Examples: any number from 8000-8999, 8%, 8n%, 8nn% where n is any number from 0-9
Edited by: cwilbur on Sep 14, 2011 1:28 PM

Hit 5 Transfer Limit for purchased music.Multiple drive failures. Wht Now?

I've had multiple drive failures on my G=4 and I've reached
the last allowable transfer of purchased music from my
Ipod back to the new drive.
****.... Why doesn't it just recognize the computer otherwise
so that my re=loads aren't used up. Only 5 are allowed.
So now....What happens if and when this drive fails? Do I then
lose all future use of that very expensive, purchased music?
Makes me want to NEVER download from the Itunes store again,\
if this is indeed the case.
What can I do?

There is no limit on "transfer of purchased music from my Ipod back to the new drive." You can store the iTunes Store purchased music as many times as your want on as many different hard drives, and play them all, as long as the computer doing the playing is authorized with your iTunes account (the one used to purchase the songs)
There is a "five" limit, and it is based on machine. You can play music purchased with a specific iTunes Store account on up to FIVE different computers at any given time. Each one is registered with the account, and when you reach five, you cannot add any more. The machine itself is identified (by something on the motherboard) so a new hard drive should not make the machine a "new" machine. So not sure what's happening if all you did was replace the hard drive...
In any event, you can clear your iTunes Store account of all authorized machines and get a fresh start. Here's how (see section +To deauthorize all computers associated with your account+ in the linked article).
http://support.apple.com/kb/HT1420

How to achieve "as if" multiple exes running from one exe in C#

Can you let me know whether following tasks is achievable or not, if yes then how, if no then why.
I have got mailing function written in C#, i need to send 50 mails at one shot. Now i can achieve this by two ways either run 50 exes at one time or by implementing threading concept in single program.
But as expected threading concept is not giving me result or can say performance as i am getting by running multiple exes. Can you help me by giving suggestion or concept for running one program and get the performance of running multiple exes.
With Regards, Yusuf

Hi Yusuf,
>>i can achieve this by two ways either run 50 exes
at one time or by implementing threading concept in single program
What you mean with "threading concept"? Instead of 50 exes?
Assume you have many exes, From my point of view, you can use multithread. Like
http://msdn.microsoft.com/en-us/library/dd460717(v=vs.110).aspx You can distribute your work across the different cores, which gives better performance.
If you exes are not too many, A loop is OK. Either "for" or also "while" and loop over the 50 (maybe 1000) mails in a seperated thread to send them.
Happy holidays!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What causes multiple "plugin-container.exe" to run simultaneously?

I sometimes have up to four "plugin-containers" running simultaneously. What causes that AND what are the possible ramifications of that?

plugins like flash & java etc that are currently running on sites are outsourced into the plugin-container.exe-process that you've discovered for performance and stability reasons - you can have a look at your currently installed plugins in tools > addons > plugins & disable those you don't need.
in one of the upcoming releases firefox will ship with a feature that allows you to enable plugins on vistited sites on a per-demand basis, [https://wiki.mozilla.org/Opt-in_activation_for_plugins]
''edit - also see [[What is plugin-container]]''

BSOD leading to sudden multiple device failure.

OK, this is the second time I'm trying to write this - the site here went weird on me and I lost the script I'd written (I even copied just in case, but somehow lost that too). This will likely not be as detailed or well put together since my time is running short at work and I have to leave soon. But I really want to try and get this in beforehand so there might be a better chance of a response by the time I can log on later this evening...
Machine:
Satelite A665-S6094
nVidia Graphics, i7 Core
Win7 x64 Home Premium
4 GB Ram
Programs Running At Time Of Fault:
Firefox w/ NoScript, AdBlockPlus & TACO
This machine is new. It's 3 weeks old out of the box. There's been no sign of any trouble or any issues until last night. >_<
Course Of Events:
* Computer left on Sleep w/ lid closed (on table where it lives) for ~1 hour. When opened and logged back in, suddenly a quiet high-pitched tone starts and then gets louder. Tone resolves into a very fast cycling of beeps. Computer spontaniously reboots. Beeps also happen at shut-down.
* Beeping tones start again at CMOS Checks - before the Toshiba Splash Screen. They sound much higher and are far faster than any DOS Beep Code I've ever heard, and I can find no pattern to them. The tone is long at times, 10 or more secods at a run, before resolving into separate beeps again. Sometimes there's whole moments without them too.
* Windows Log-In, great. Upon loading, touchpad will only work as a mouse - tapping & gestures do not work, but settings look fine. The Media Shortcut Buttons are also dead, the backlight behind each one will light up & go off in random patters but the buttons do nothing.
* This first reboot only, the computer comes up in "Eco Mode". This doesn't happen again, but is strange as we've never used it. I'm not really clear on what it is.
* After 5 minutes, computer reboots itself again. This is the only time it's done this aside from the first fail.
* The beeping & tones are a constant every time the computer is started and every time it shuts down. I'm still not sure if it's a DOS beep though, it just sounds nothing like one. The pitch is more like feed-back. Every time, the touchpad and buttons fail after log-in. The beeps/tones continue while the computer is on too, but they're not as loud.
* At one point I tried a restore point. FAIL. Computer refused to restart when restore was done. Offered a "Repair from a restore point". Tried, Fail - looked to be multiple BSOD. Offered to "Repair the Bootsector". This got me back to where I was before - beeping and 2 devices not working.
What I've tried so far:
Sorry, this is not a lot. Happened at 11 PM last night - work night - and have been at work all day.
* Scans w/ Avast, Malwarebytes, Spybot. Stopped here as nothing was found by that point.
* Restore to restore point - Failed miserably and in fact made things worse for a bit.
* Basic Memory Test w/ MemTest. Could only manage basic, as had to get to sleep. 2 passes w/ both RAM chips in. Passed.
What I plan to try tonight:
* NirSoft BSV to see what the stop errors are.
* Serious MemTest
* Possible HD Test
* Lot of reading to figure this out.
Theories:
* The failure of the restore point makes me think it could be a memory failure...
* The Bootsector Repair makes me wonder about a sudden, vicious bootsector virus - anyone know if there's any new ones going around?
* I read this afternoon about similar issues on Toshibas being caused by a corrupt CMOS, and as this starts at CMOS Call it's making me wonder. Is anyone more informed on this issue, and possibly know a test for it?
* Possible bad BIOS? Doubtful, but any thoughts?
* Less likely, but I guess still possible, failing HD?
Am looking for theories, thoughts, ideas and new things to check.
Am also really, really hoping there's someone who recognises this issue for what it is and can just tell me where the fault is and how to fix it. OK, I know this is really unlikely, but I can hope. =)
Will be back on this evening to update if I have anything to update with.

Wow! My spouse found a thread on this Forum I'd previously overlooked, because I was doing a search for the full model# and not just the 1st 4 digits. I didn't have time to do a thorough search yet, but my sweetie did. In the hopes this helps someone else who comes looking for this issue,
Here's the answer:
http://forums.toshiba.com/t5/Keyboards-Touchpads/Satellite-A665-Media-Touch-Buttons-Unresponsive/m-p...
Specifically the solution given by Jerry_Lippey after the OP's original post.
Jerry, whoever you are I'm giving you a giant online hug! You just made my month! =D Thank you SO much!
The key was my saying earlier the beeping reminded me more of feedback than anythng else, and the OP mentioning the behavior from the media buttons being slow, as if any commands given them were stacked behind a thrashing cpu. The behavior of my buttons were similar and the behavior of the noise made sense if it were a charge build-up.
So, a new question then. Does anyone know what causes this build-up and where it's living that it's freezing computers and generating speaker feed-back even before BIOS or Windows loads? This strikes me as potentially damaging to the mobo and/or chips over time...
So far, there seems to be no damage from the bad attempt at a restore. Hopefully this will remain the case... Machine is running beautifully again. ^_^

+d flag can cause C++ compilation failure in 12.4 beta refresh

I was using the July refresh of Solaris Studio 12.4 beta to compile cppunit 1.13.2 and came across a file that fails to compile when the +d flag is used on the C++ compiler.
The file is XmlOutputter.cpp. I have put a slightly modified version of the pre-processed source code for this on pastebin here: http://pastebin.com/9gHkYXnX - save it to XmlOutputter.pre.cpp. (Alternatively you can get the full source code for cppunit 1.13.2 here: http://dev-www.libreoffice.org/src/cppunit-1.13.2.tar.gz )
The first weird thing is that when compiling the original pre-processed file like this:
CC -mt -std=c++11 -m64 -O4 -c -o XmlOutputter.lo XmlOutputter.pre.cpp
I got the error:
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/include/CC/gnu/builtins.h", line 248: Error: Multiple declaration for __sun_va_list.
1 Error(s) detected.
which I didn't get when compiling the original un-pre-processed file. I worked around that by commenting out lines 6-11 in the pre-processed file. This is what is on pastebin, so if you want to look at this first problem then uncomment lines 6-11. However, I'm not particularly worried about this as I don't generally have a need to compile pre-processed source code.
The difference I wanted to report was that if you compile the pre-processed file (exactly as it is on pastebin with lines 6-11 commented out) using:
CC -mt -std=c++11 -m64 -O4 -c -o XmlOutputter.lo XmlOutputter.pre.cpp
then everything is fine. However, if you compile it using:
CC -mt -std=c++11 -m64 -O4 +d -c -o XmlOutputter.lo XmlOutputter.pre.cpp
then you get this error:
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 1088: Error: Cannot use unknown type to initialize CppUnit::TestFailure*.
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 1075:     Where: While instantiating "std::pair<CppUnit::Test*const, CppUnit::TestFailure*>::pair<CppUnit::Test*const&, 0>(std::tuple<CppUnit::Test*const&>&, std::tuple<>&, std::_Index_tuple<0>, std::_Index_tuple<>)".
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 1075:     Where: Instantiated from std::_Rb_tree<CppUnit::Test*, std::pair<CppUnit::Test*const, CppUnit::TestFailure*>, std::_Select1st<std::pair<CppUnit::Test*const, CppUnit::TestFailure*>>, std::less<CppUnit::Test*>, std::allocator<std::pair<CppUnit::Test*const, CppUnit::TestFailure*>>>::_M_emplace_hint_unique<const std::piecewise_construct_t&, std::tuple<CppUnit::Test*const&>, std::tuple<>>(std::_Rb_tree_const_iterator<std::pair<CppUnit::Test*const, CppUnit::TestFailure*>>, const std::piecewise_construct_t&, std::tuple<CppUnit::Test*const&>&&, std::tuple<>&&).
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 467:     Where: Instantiated from non-template code.
1 Error(s) detected.
Also, the only reason I was using the +d flag at all was to work around the problem reported here: Re: >> Assertion:   (../lnk/foldconst.cc, line 230) (Studio 12.4 Beta, -std=c++11) I assume that's now fixed, so there is no need for me to use +d, but it would be interesting to know why +d causes an error when compiling XmlOutputter.cpp.
I'm working on Oracle Solaris 10 1/13 s10x_u11wos_24a X86

> Error: Multiple declaration for __sun_va_list.
Preprocessed files do not always behave the same as original ones.
But here you hit a bug which is present on x86-64 platform (Solaris/Linux) only.
You can just delete definition of __sun_va_list type at the start of preprocessed file and it should go fine.
> I assume that's now fixed, so there is no need for me to use +d
Yes, it is fixed in July Beta.
> Error: Cannot use unknown type to initialize CppUnit::TestFailure*.
Bug 19159587 filed (C++11: errors on a simple <map> usage).
Thanks for reporting a problem.

KB3045999 (MS15-038) causing multiple exe failures (0xc0000018)

Similar Messages

Maybe you are looking for